一种解决电帆长期自旋速率变化问题的TI系缆装置
TI tether rig for solving secular spinrate change problem of electric sail
摘要:
电动太阳风帆(E-sail)是一种利用天然太阳风作为推力源来推进航天器的方法。长期的自旋速率变化的问题被确定较早,这是由于轨道科里奥利效应,并倾向于缓慢地增加或减少帆的自旋速率,这取决于帆是倾斜相对于太阳风的方式。在这里,我们提出了一个电子帆的设计和相关的控制算法,使旋转速度控制在推进飞行过程中的电子帆效应本身。在该设计中,每隔一个主系链(“T系链”)通过远程单元与两个相邻的辅助系链电连接,而其他主系链(“I系链”)与系链绝缘。这使得能够有效地分别控制主系链和辅助系链电压,这又使得能够控制旋转速率。数值模拟结果表明,该算法能够在实际太阳风中完全控制E帆的自旋状态。模拟包括一组简单而现实的控制器传感器:用于检测远程单元角位置的成像器和矢量加速度计。成像器分辨率要求是适度的,并且加速度计噪声要求是可行的。TI系绳钻机能够构建能够完全控制其自旋状态的E帆,但由主航天器的纯系绳电压调制驱动,并且在飞行期间不需要远程单元的功能。
英文摘要:
The electric solar wind sail (E-sail) is a way to propel a spacecraft by using the natural solar wind as a thrust source. The problem of secular spinrate change was identified earlier which is due to the orbital Coriolis effect and tends to slowly increase or decrease the sail's spinrate, depending on which way the sail is inclined with respect to the solar wind. Here we present an E-sail design and its associated control algorithm which enable spinrate control during propulsive flight by the E-sail effect itself. In the design, every other maintether ("T-tether") is galvanically connected through the remote unit with the two adjacent auxtethers, while the other maintethers ("I-tethers") are insulated from the tethers. This enables one to effectively control the maintether and auxtether voltages separately, which in turn enables spinrate control. We use a detailed numerical simulation to show that the algorithm can fully control the E-sail's spin state in real solar wind. The simulation includes a simple and realistic set of controller sensors: an imager to detect remote unit angular positions and a vector accelerometer. The imager resolution requirement is modest and the accelerometer noise requirement is feasible to achieve. The TI tether rig enables building E-sails that are able to control their spin state fully and yet are actuated by pure tether voltage modulation from the main spacecraft and requiring no functionalities from the remote units during flight.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。