具有真实帆形的电动太阳风帆的推力矢量
Thrust vectoring of an electric solar wind sail with a realistic sail shape
摘要:
为解决太阳风帆板姿态保持和推力矢量控制问题,建立了旋转电动太阳风帆板在离心力和太阳风动压作用下的外形模型。帆装置假设离心拉伸的主系绳从帆自旋平面中的航天器径向向外延伸。此外,主系绳的尖端容纳通过帆缘处的辅助系绳连接的远程单元。在这里,我们推导出方程的主系绳的形状,并提出了一个数值解和解析近似的形状参数化的比的电帆力的离心力和相对于太阳风方向的帆取向。由此产生的形状是这样的,在航天器附近,主系绳的根部形成圆锥体,而朝向边缘,该圆锥体被离心力压平,并且帆与帆自旋平面共面。我们的近似帆形参数化只有系绳根锥角和主系绳长度。利用近似的形状,我们得到的扭矩和推力的电帆力施加到帆。因此,所需的帆姿态的维持的系绳电压调制的幅度被作为一个无扭矩的解决方案。振幅小于先前获得的刚性单系绳类似于一个球形摆。这意味着保持帆姿态所需的推力裕度较小。对于一个给定的电压调制,推力矢量,然后考虑的径向和横向推力分量。
英文摘要:
The shape of a rotating electric solar wind sail under the centrifugal force and solar wind dynamic pressure is modeled to address the sail attitude maintenance and thrust vectoring. The sail rig assumes centrifugally stretched main tethers that extend radially outward from the spacecraft in the sail spin plane. Furthermore, the tips of the main tethers host remote units that are connected by auxiliary tethers at the sail rim. Here, we derive the equation of main tether shape and present both a numerical solution and an analytical approximation for the shape as parametrized both by the ratio of the electric sail force to the centrifugal force and the sail orientation with respect to the solar wind direction. The resulting shape is such that near the spacecraft, the roots of the main tethers form a cone, whereas towards the rim, this coning is flattened by the centrifugal force, and the sail is coplanar with the sail spin plane. Our approximation for the sail shape is parametrized only by the tether root coning angle and the main tether length. Using the approximate shape, we obtain the torque and thrust of the electric sail force applied to the sail. As a result, the amplitude of the tether voltage modulation required for the maintenance of the sail attitude is given as a torque-free solution. The amplitude is smaller than that previously obtained for a rigid single tether resembling a spherical pendulum. This implies that less thrusting margin is required for the maintenance of the sail attitude. For a given voltage modulation, the thrust vectoring is then considered in terms of the radial and transverse thrust components.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。