用于放大横向推力的电帆控制模式
Electric sail control mode for amplified transverse thrust
摘要:
电动太阳风帆通过与太阳风质子相互作用的离心跨越的高压系绳产生推力。帆的姿态可以控制和姿态机动是可能的系绳电压调制与帆旋转同步。特别地,帆可以相对于太阳风方向倾斜以获得横向推力来改变密切轨道角动量。这种倾斜必须通过连续的控制电压调制来保持。因此,可用于推力的系绳电压小于由电力系统提供的最大电压。使用一个球摆作为一个单一的旋转系绳的模型,我们推导出两个单独的帆控制模式的控制效率的分析估计。一种是对应于严格平面系绳尖端运动的连续控制调制。另一种是系绳末端在鞍形表面上沿闭环运动的开关调制。在此引入了一种新型的开关模式,既能放大横向推力,又能降低功耗。在旋转周期期间,当产生大部分横向推力时,仅在两个推力弧上向系绳施加最大电压。除了横向推力外,我们还得到了两种控制模式下的推力角和电功率消耗。结果表明,连续调制时的推进角约为帆倾角的一半,而开关调制时的推进角约为帆倾角的一半。在考虑功率消耗的情况下,重点分析了开关模式的效率,开关模式可以通过减小动力系统质量来提高推进加速度。
英文摘要:
The electric solar wind sail produces thrust by centrifugally spanned high voltage tethers interacting with the solar wind protons. The sail attitude can be controlled and attitude maneuvers are possible by tether voltage modulation synchronous with the sail rotation. Especially, the sail can be inclined with respect to the solar wind direction to obtain transverse thrust to change the osculating orbit angular momentum. Such an inclination has to be maintained by a continual control voltage modulation. Consequently, the tether voltage available for the thrust is less than the maximum voltage provided by the power system. Using a spherical pendulum as a model for a single rotating tether, we derive analytical estimations for the control efficiency for two separate sail control modes. One is a continuous control modulation that corresponds to strictly planar tether tip motion. The other is an on-off modulation with the tether tip moving along a closed loop on a saddle surface. The novel on-off mode is introduced here to both amplify the transverse thrust and reduce the power consumption. During the rotation cycle, the maximum voltage is applied to the tether only over two thrusting arcs when most of the transverse thrust is produced. In addition to the transverse thrust, we obtain the thrusting angle and electric power consumption for the two control modes. It is concluded that while the thrusting angle is about half of the sail inclination for the continuous modulation it approximately equals to the inclination angle for the on-off modulation. The efficiency of the on-off mode is emphasized when power consumption is considered, and the on-off mode can be used to improve the propulsive acceleration through the reduced power system mass.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。