ESTCube-1纳米卫星的电子帆测试有效载荷
E-sail test payload of ESTCube-1 nanosatellite
摘要:
2013年5月发射的ESTCube-1号的科学任务是测量轨道上的电动太阳风帆(E-sail)力。该实验计划推动芬兰气象研究所最近发明的推进方法E-sail的发展。E-sail的原理是利用细长的带电系绳从太阳风等离子流中提取动量。在ESTCube-1的轨道高度(660- 680公里),没有太阳风存在。相反,ESTCube-1应观测带电系绳与电离层等离子体之间的相互作用。ESTCube-1有效载荷使用一根10米长的部分双丝E帆系绳和一个存储它的电动卷轴。系绳应借助离心力从旋转的卫星上展开。在系绳的尖端处添加额外的质量以辅助展开。在E-sail实验期间,系绳应充电至500 V电位。正负电压均应进行试验。电压由专用高压电源提供,并通过滑环触点输送到系绳。当负电压被施加到系绳时,卫星主体预计将吸引能够补偿离子流的电子流,该离子流从周围的等离子体流向系绳。在施加正电压的情况下,机载冷阴极电子枪用于去除多余的电子以维持系绳的正电压。在本文中,我们提出了ESTCube-1的系绳有效载荷的设计和结构。
英文摘要:
The scientific mission of ESTCube-1, launched in May 2013, is to measure the Electric solar wind sail (E-sail) force in orbit. The experiment is planned to push forward the development of E-sail, a propulsion method recently invented at the Finnish Meteorological Institute. E-sail is based on extracting momentum from the solar wind plasma flow by using long thin electrically charged tethers. ESTCube-1 is equipped with one such tether, together with hardware capable of deploying and charging it. At the orbital altitude of ESTCube-1 (660--680~km) there is no solar wind present. Instead, ESTCube-1 shall observe the interaction between the charged tether and the ionospheric plasma. The ESTCube-1 payload uses a 10-meter, partly two-filament E-sail tether and a motorized reel on which it is stored. The tether shall be deployed from a spinning satellite with the help of centrifugal force. An additional mass is added at the tip of the tether to assist with the deployment. During E-sail experiment the tether shall be charged to 500~V potential. Both positive and negative voltages shall be experimented with. The voltage is provided by a dedicated high voltage source and delivered to the tether through a slip ring contact. When the negative voltage is applied to the tether, the satellite body is expected to attract electron flow capable of compensating for the ion flow, which runs to the tether from the surrounding plasma. With the positive voltage applied, onboard cold cathode electron guns are used to remove excess electrons to maintain the positive voltage of the tether. In this paper we present the design and structure of the tether payload of ESTCube-1.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。