arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1601.04694physics.ins-detphysics.optics
收藏

脊传感器--微结构表面涂层的光散射

Riblet Sensor -- Light Scattering on Micro Structured Surface Coatings

Mirco Imlau, Hauke Bruening, Kay-Michael Voit, Juliane Tschentscher, Volker Dieckmann

摘要:

通过在飞机上应用适当的表面结构,在正常的空中交通中可以节省高达8%的燃料。在将这些技术引入生产环境之前,需要在制造和服务期间使用表面结构化质量的控制方法,以确保结构化涂层的持久质量和合理的表面更新决策。在这个项目中,实现上述改进的重要要求得到了满足。我们已经表明,快速采样是可能的,使用非接触式激光探测,我们已经提出了一个工作的传感器的初步配置。在理论部分中,建立了探测激光束与被测表面相互作用的模型,并推导了产生的波前。这是使用惠更斯-菲涅耳衍射理论和几何光学的组合来完成的。然后,该模型被用来咨询实验装置的设计,解释新兴的数据,并开发样本的特征量,它们从数据和它们的SNR比的推导。在实验部分,研究了激光与结构化沟槽表面的相互作用。为此,安装了光学装置,根据各种实验参数对未退化和退化表面进行测量。这些测量的结果经常与理论计算进行比较和检查。它允许非常敏感的测量,即使是轻微的表面退化。在此,不管由于材料的机械损失而对肋的损坏是对称的还是不对称的,或者不管其是否源自由于肋材料本身的化学过程而引起的反射率的变化。

英文摘要:

With the application of appropriate surface structuring on aircrafts, up to 8\% fuel may be saved in regular air traffic. Before these techniques can be introduced into productive environments, a controlling method for the quality of surface structuring is needed to be used during fabrication and service, ensuring persistent quality of the structured coatings and a justified decision for surface renewal. In this project, these important requirements for achieving the improvements defined above are fulfilled. We have shown that fast sampling is possible using noncontacting laser probing, and we have presented a working preliminary configuration for the sensor. In the theoretical part, a model for the interaction between a probing laser beam and the surface is developed and the resulting wavefront is derived. This is done using a combination of Huygens-Fresnel diffraction theory and geometrical optics. The model is then used to counsel the design of the experimental setup, to interpret the emerging data and to develop characteristic quantities for the sample, their derivation from the data and their SNR ratio. In the experimental part, the interaction of laser light with the structured riblet surface is studied. For this purpose an optical setup was installed to perform measurements of undegraded and degraded surfaces depending on a variety of experimental parameter. The results of these measurements are constantly compared and checked with the theoretical calculations. It allows for very sensitive measurements of even slight degradations of the surfaces. Here, it is regardless if the damage to the riblets is symmetrical or asymmetrical due to mechanical loss of material or if it is deriving from changes of reflectivity due to chemical processes of the riblet material itself.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑