用于测试ATHENA光学器件模块化元件的扩展X射线束设施(BEaTriX)
An expanded X-ray beam facility (BEaTriX) to test the modular elements of the ATHENA optics
摘要:
未来的大型X射线天文台(如ATHENA)将配备非常大的光学系统,通过组装模块化光学元件获得,称为X射线光学单元(XNUMX),基于硅孔光学或塌陷玻璃光学技术。在这两种情况下,模块化光学器件的最终质量(ATHENA的5 arcsec HEW要求)取决于组件内XOU的精确对准,但也取决于单个XOU的角分辨率。这受到反射镜形状精度、其表面粗糙度以及反射镜本身内部的相互对准的影响。由于要生产大量的XOU,因此需要定期进行质量测试,以选择性能最好的堆叠块,并将其集成到最终的光学器件中。除了基于轮廓和粗糙度测量的通常计量学之外,利用宽的、平行的、准直的和均匀的X射线束的直接测量将是最可靠的测试,而不需要像通常在同步加速器光中那样进行焦斑重建。为此,我们设计了BEaTriX(扩束器测试X射线设备),将在INAF-OAB实现,专门用于XOU的功能测试。掠入射抛物柱面镜和非对称切割晶体将产生足够宽的平行X射线光束,以照亮聚焦元件的整个孔径。在距反射镜焦距处的X射线照相机将直接记录图像。选择不同的晶体将能够测试1 - 5 keV范围内的XOU,包括在ATHENA的X射线能带(0.2-12 keV)中。在本文中,我们讨论了一个可能的BEaTriX设施的实现。我们还展示了光学系统的初步性能模拟。
英文摘要:
Future large X-ray observatories like ATHENA will be equipped with very large optics, obtained by assembling modular optical elements, named X-ray Optical Units (XOU) based on the technology of either Silicon Pore Optics or Slumped Glass Optics. In both cases, the final quality of the modular optic (a 5 arcsec HEW requirement for ATHENA) is determined by the accuracy alignment of the XOUs within the assembly, but also by the angular resolution of the individual XOU. This is affected by the mirror shape accuracy, its surface roughness, and the mutual alignment of the mirrors within the XOU itself. Because of the large number of XOUs to be produced, quality tests need to be routinely done to select the most performing stacked blocks, to be integrated into the final optic. In addition to the usual metrology based on profile and roughness measurements, a direct measurement with a broad, parallel, collimated and uniform X- ray beam would be the most reliable test, without the need of a focal spot reconstruction as usually done in synchrotron light. To this end, we designed the BEaTriX (Beam Expander Testing X-ray facility) to be realized at INAF-OAB, devoted to the functional tests of the XOUs. A grazing incidence parabolic mirror and an asymmetrically cut crystal will produce a parallel X-ray beam broad enough to illuminate the entire aperture of the focusing elements. An X-ray camera at the focal distance from the mirrors will directly record the image. The selection of different crystals will enable to test the XOUs in the 1 - 5 keV range, included in the X-ray energy band of ATHENA (0.2-12 keV). In this paper we discuss a possible BEaTriX facility implementation. We also show a preliminary performance simulation of the optical system.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。