Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60 GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60 GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase the total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is the distributed antenna type architecture to realize centralized coordination, while the other is an autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.
In this work, we analyze the throughput of random access multi-user relay-assisted millimeter-wave wireless networks, in which both the destination and the relay have multipacket reception capability. We consider a full-duplex network cooperative relay that stores the successfully received packets in a queue, for which we analyze the performance. Moreover, we study the effects on the network throughput of two different strategies, by which the source nodes transmit either a packet to both the destination and the relay in the same timeslot by using wider beams (broadcast approach) or to only on…
The development of self-interference (SI) cancelation technology makes full-duplex (FD) communication possible. Considering the quality of service (QoS) of flows in small cells densely deployed scenario with limited time slot (TS) resources, this paper introduces the FD communication into the concurrent scheduling problem of millimeter-wave (mmWave) wireless backhaul network. We propose a QoS-aware FD concurrent scheduling algorithm to maximize the number of flows with their QoS requirements satisfied. Based on the contention graph, the algorithm makes full use of the FD condition. Both residu…
The future wireless communication system faces the bottleneck of the shortage of traditional spectrum resources and the explosive growth of the demand for wireless services. Millimeter-wave communication with spectral resources has become an effective choice for the next generation of wireless broadband cellular communication. However, the transmission path loss is large and oxygen and water molecules absorb Characteristics such as seriousness have brought great challenges to millimeter wave communication, and it is necessary to seek a technical approach different from low-frequency wireless c…
With the development of self-interference (SI) cancelation technology, full-duplex (FD) communication becomes possible. FD communication can theoretically double the spectral efficiency. When the time slot (TS) resources are limited and the number of flows is large, the scheduling mechanism of the flows becomes more important. Therefore, the effectiveness of FD scheduling mechanism for the flows is studied in millimeter wave wireless backhaul network with the limited TS resources. We proposed a full duplex concurrent scheduling algorithm based on coalition game (FDCG) to maximize the number of…
Internet of Things is one of the most promising technology of the fifth-generation (5G) mobile broadband systems. Data-driven wireless services of 5G systems require unprecedented capacity and availability. The millimeter-wave based wireless communication technologies are expected to play an essential role in future 5G systems. In this article, we describe the three broad categories of fifth-generation services, viz., enhanced mobile broadband, ultra-reliable and low-latency communications, and massive machine-type communications. Furthermore, we introduce the potential issues of consumer devi…
National University of Defense Technology（国防科技大学）；Chongqing University（重庆大学）
We consider the mobile localization problem in future millimeter-wave wireless networks with distributed Base Stations (BSs) based on multi-antenna channel state information (CSI). For this problem, we propose a Semi-supervised tdistributed Stochastic Neighbor Embedding (St-SNE) algorithm to directly embed the high-dimensional CSI samples into the 2D geographical map. We evaluate the performance of St-SNE in a simulated urban outdoor millimeter-wave radio access network. Our results show that St-SNE achieves a mean localization error of 6.8 m with only 5% of labeled CSI samples in a 200*200 m^…
There have been active research activities worldwide in developing the next-generation 5G wireless network. The 5G network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections, achieve better cost- and energy-efficiency as well as quality of service (QoS) in terms of communication delay, reliability and security. To this end, the 5G wireless network should exploit potential gains in different network dimensions including super dense and heterogeneous deployment of cells and massive antenna arrays (i.e., massive multiple input multiple…
This paper considers the joint optimization of trajectory and beamforming of a wirelessly connected robot using intelligent reflective surface (IRS)-assisted millimeter-wave (mm-wave) communications. The goal is to minimize the motion energy consumption subject to time and communication quality of service (QoS) constraints. This is a fundamental problem for industry 4.0, where robots may have to maximize their battery autonomy and communication efficiency. In such scenarios, IRSs and mm-waves can dramatically increase the spectrum efficiency of wireless communications providing high data rates…
Wideband Parameters Analysis and Validation for Indoor radio Channel at 60/70/80GHz for Gigabit Wireless Communication employing Isotropic, Horn and Omni directional Antenna
Contemporary Virtual Reality (VR) setups commonly consist of a Head-Mounted Display (HMD) tethered to a content-generating server. "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. Higher frequencies, such as the millimeter-wave (mmWave) band, can support these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. For VR setups, beamforming must adapt in real-time to the user's head rotations, but can rely on the HMD's bui…
With millimeter wave (mmWave) wireless communication envisioned to be the key enabler of next generation high data rate wireless networks, security is of paramount importance. While conventional security measures in wireless networks operate at a higher layer of the protocol stack, physical layer security utilizes unique device dependent hardware features to identify and authenticate legitimate devices. In this work, we identify that the manufacturing tolerances in the antenna arrays used in mmWave devices contribute to a beam pattern that is unique to each device, and to that end we propose a…
Heterogeneous Networks (HetNets) are known to enhance the bandwidth efficiency and throughput of wireless networks by more effectively utilizing the network resources. However, the higher density of users and access points in HetNets introduces significant inter-user interference that needs to be mitigated through complex and sophisticated interference cancellation schemes. Moreover, due to significant channel attenuation and presence of hardware impairments, e.g., phase noise and amplifier nonlinearities, the vast bandwidth in the millimeter-wave band has not been fully utilized to date. In o…
This paper provides indoor reflection, scattering, transmission, and large-scale path loss measurements and models, which describe the main propagation mechanisms at millimeter wave and Terahertz frequencies. Channel properties for common building materials (drywall and clear glass) are carefully studied at 28, 73, and 140 GHz using a wideband sliding correlation based channel sounder system with rotatable narrow-beam horn antennas. Reflection coefficient is shown to linearly increase as the incident angle increases, and lower reflection loss (e.g., stronger reflections) are observed as freque…
With the explosive growth of mobile traffic demand, densely deployed small cells underlying macrocells have great potential for 5G and beyond wireless networks. In this paper, we consider the problem of supporting traffic flows with diverse QoS requirements by exploiting three high frequency bands, i.e., the 28GHz band, the E-band, and the Terahertz (THz) band. The cooperation of the three bands is helpful for maximizing the number of flows with their QoS requirements satisfied. To solve the formulated nonlinear integer programming problem, we propose a triple-band scheduling scheme which can …
5G networks are expected to achieve gigabit-level throughput in future cellular networks. However, it is a great challenge to treat 5G wireless backhaul traffic in an effective way. In this article, we analyze the wireless backhaul traffic in two typical network architectures adopting small cell and millimeter wave commmunication technologies. Furthermore, the energy efficiency of wireless backhaul networks is compared for different network architectures and frequency bands. Numerical comparison results provide some guidelines for deploying future 5G wireless backhaul networks in economical an…
This paper presents results on the achievable spectral efficiency and on the energy efficiency for a wireless multiple-input-multiple-output (MIMO) link operating at millimeter wave frequencies (mmWave) in a typical 5G scenario. Two different single-carrier modem schemes are considered, i.e., a traditional modulation scheme with linear equalization at the receiver, and a single-carrier modulation with cyclic prefix, frequency-domain equalization and FFT-based processing at the receiver; these two schemes are compared with a conventional MIMO-OFDM transceiver structure. Our analysis jointly tak…
Relaying techniques for millimeter-wave wireless networks represent a powerful solution for improving the transmission performance. In this work, we quantify the benefits in terms of delay and throughput for a random-access multi-user millimeter-wave wireless network, assisted by a full-duplex network cooperative relay. The relay is equipped with a queue for which we analyze the performance characteristics (e.g., arrival rate, service rate, average size, and stability condition). Moreover, we study two possible transmission schemes: fully directional and broadcast. In the former, the source no…
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable low-latency communication (URLLC). Existing wireless systems that solely rely on the scarce sub-6 GHz, microwave ($μ$W) frequency bands will be unable to meet such stringent and mixed service requirements for future wireless services due to spectrum scarcity. Meanwhile, operating at high-frequency millimeter wave (mmWave) bands is seen as an attractive solution, p…
For future networks (i.e., the fifth generation (5G) wireless networks and beyond), millimeter-wave (mmWave) communication with large available unlicensed spectrum is a promising technology that enables gigabit multimedia applications. Thanks to the short wavelength of mmWave radio, massive antenna arrays can be packed into the limited dimensions of mmWave transceivers. Therefore, with directional beamforming (BF), both mmWave transmitters (MTXs) and mmWave receivers (MRXs) are capable of supporting multiple beams in 5G networks. However, for the transmission between an MTX and an MRX, most wo…
Millimeter wave (mmW) communications at the 60 GHz unlicensed band is seen as a promising approach for boosting the capacity of wireless local area networks (WLANs). If properly integrated into legacy IEEE 802.11 standards, mmW communications can offer substantial gains by offloading traffic from congested sub-6 GHz unlicensed bands to the 60 GHz mmW frequency band. In this paper, a novel medium access control (MAC) is proposed to dynamically manage the WLAN traffic over the unlicensed mmW and sub-6 GHz bands. The proposed protocol leverages the capability of advanced multi-band wireless stati…
There is much interest in integrating millimeter wave radios (mmWave) into wireless LANs and 5G cellular networks to benefit from their multiple GHz of available spectrum. Yet unlike existing technologies, e.g., WiFi, mmWave radios require highly directional antennas. Since the antennas have pencil-beams, the transmitter and receiver need to align their antenna beams before they can communicate. Existing solutions scan the entire space to find the best alignment. Such a process has been shown to introduce up to seconds of delay, and is unsuitable for wireless networks where an access point has…
Reconfigurable Intelligent Surfaces (RIS) are considered a key enabler to achieve the vision of Smart Radio Environments, where the propagation environment can be programmed and controlled to enhance the efficiency of wireless systems. These surfaces correspond to planar sheets comprising a large number of small and low-cost reflecting elements whose parameters are adaptively selected with a programmable controller. Hence, by optimizing these coefficients, the information signals can be directed in a customized fashion. On the other hand, the initial access procedure used in 5G is beam sweepin…
Millimeter-wave (mmWave) frequency bands offer a new frontier for next-generation wireless networks, popularly known as 5G, to enable multi-gigabit communication; however, the availability and reliability of mmWave signals are significantly limited due to its unfavorable propagation characteristics. Thus, mmWave networks rely on directional narrow-beam transmissions to overcome severe path-loss. To mitigate the impact of transmission-reception directionality and provide uninterrupted network services, ensuring the availability of mmWave transmission links is important. In this paper, we propos…
Millimeter-wave (mmWave) communication is a promising technology to cope with the exponential increase in 5G data traffic. Such networks typically require a very dense deployment of base stations. A subset of those, so-called macro base stations, feature high-bandwidth connection to the core network, while relay base stations are connected wirelessly. To reduce cost and increase flexibility, wireless backhauling is needed to connect both macro to relay as well as relay to relay base stations. The characteristics of mmWave communication mandates new paradigms for routing and scheduling. The pap…
Increasing wireless cellular networks capacity is one of the major challenges for the coming years, especially if we consider the annual doubling of mobile user traffic. Towards that and thanks to the fact that a significant amount of mobile data is indeed delay tolerable, in this paper, we suggest embedding the delayed offloading of some user traffic to be a part of future wireless cellular networks. To accomplish this, user delayed files will be offloaded using ultra-high speed Millimeter Wave (Mm-W) Gates. The Mm-W Gate, which will be distributed inside the Macro basestation (BS) area, cons…
IEEE 802.11ay defines new PHY and MAC specifications that enable 100 Gbps communications in the 60 GHz millimeter-wave (mmWave) band. Among the various use cases supported by IEEE 802.11ay, fixed wireless access, a cost-efficient high-performance alternative and/or complement to conventional fixed access, differentiates itself due to its unique requirements and characteristics. In this article, our goal is to identify and describe key elements incorporated into IEEE 802.11ay, including scheduling, beamforming, and link maintenance, that efficiently support fixed wireless access. IEEE 802.11ay …
Recently, a mmWave-based access and backhaul integration heterogeneous networks (HetNets) architecture (mABHetNets) has been envisioned to provide high wireless capacity.Since the access link and the backhaul link share the same mmwave spectral resource, a large spectrum bandwidth is occupied by the backhaul link, which hinders the wireless access capacity improvement. To overcome the backhaul spectrum occupation problem and improve the network throughput in the existing mABHetNets, we introduce the cache at base stations (BSs). In detail, by caching popular files at small base stations (SBSs)…
Heterogeneous network (HetNet) is a key enabler to largely boost network coverage and capacity in the forthcoming fifth-generation (5G) and beyond. To support the explosively growing mobile data volumes, wireless communications with millimeter-wave (mm-wave) radios have attracted massive attention, which is widely considered as a promising candidate in 5G HetNets. In this article, we give an overview on the end-to-end latency of HetNets with mm-wave communications. In general, it is rather challenging for formulating and optimizing the delay problem with buffers in mm-wave communications, sinc…
Heterogeneous ultra-dense networks enable ultra-high data rates and ultra-low latency through the use of dense sub-6 GHz and millimeter wave (mmWave) small cells with different antenna configurations. Existing work has widely studied spectral and energy efficiency in such networks and shown that high spectral and energy efficiency can be achieved. This article investigates the benefits of heterogeneous ultra-dense network architecture from the perspectives of three promising technologies, i.e., physical layer security, caching, and wireless energy harvesting, and provides enthusiastic outlook …
With the development of wireless communication, higher requirements arise for train-ground wireless communications in high-speed railway (HSR) scenarios. The millimeter-wave (mm-wave) frequency band with rich spectrum resources can provide users in HSR scenarios with high performance broadband multimedia services, while the full-duplex (FD) technology has become mature. In this paper, we study train-ground communication system performance in HSR scenarios with mobile relays (MRs) mounted on rooftop of train and operating in the FD mode. We formulate a nonlinear programming problem to maximize …
Increased density of wireless devices, ever growing demands for extremely high data rate, and spectrum scarcity at microwave bands make the millimeter wave (mmWave) frequencies an important player in future wireless networks. However, mmWave communication systems exhibit severe attenuation, blockage, deafness, and may need microwave networks for coordination and fall-back support. To compensate for high attenuation, mmWave systems exploit highly directional operation, which in turn substantially reduces the interference footprint. The significant differences between mmWave networks and legacy …
Millimeter-wave wireless networks offer high throughput and can (ideally) prevent eavesdropping attacks using narrow, directional beams. Unfortunately, imperfections in physical hardware mean today's antenna arrays all exhibit side lobes, signals that carry the same sensitive data as the main lobe. Our work presents results of the first experimental study of the security properties of mmWave transmissions against side-lobe eavesdropping attacks. We show that these attacks on mmWave links are highly effective in both indoor and outdoor settings, and they cannot be eliminated by improved hardwar…
Ultra-reliability and low-latency are pivotal requirements of the new 6th generation of communication systems (xURLLC). Over the past years, to increase throughput, adaptive active antennas were introduced in advanced wireless communications, specifically in the domain of millimeter-wave (mmWave). Consequently, new lower-layer techniques were proposed to cope with practical challenges of high dimensional and electronically-steerable beams. The transition from omni-directional to highly directional antennas presents a new type of wireless systems that deliver high bandwidth, but that are suscep…
One of the most promising approaches to overcome the uncertainty and dynamic channel variations of millimeter wave (mmW) communications is to deploy dual-mode base stations that integrate both mmW and microwave ($μ$W) frequencies. In particular, if properly designed, such dual-mode base stations can enhance mobility and handover in highly mobile wireless environments. In this paper, a novel approach for analyzing and managing mobility in joint $μ$W-mmW networks is proposed. The proposed approach leverages device-level caching along with the capabilities of dual-mode base stations to minimize h…
The massive exploitation of robots for industry 4.0 needs advanced wireless solutions that replace less flexible and more costly wired networks. In this regard, millimeter-waves (mm-waves) can provide high data rates, but they are characterized by a spotty coverage requiring dense radio deployments. In such scenarios, coverage holes and numerous handovers may decrease the communication throughput and reliability. In contrast to conventional multi-robot path planning (MPP), we define a type of multi-robot association-path planning (MAPP) problems aiming to jointly optimize the robots' paths and…
Indoor areas, such as offices and shopping malls, are a natural environment for initial millimeter-wave (mmWave) deployments. While we already have the technology that enables us to realize indoor mmWave deployments, there are many remaining challenges associated with system-level design and planning for such. The objective of this article is to bring together multiple strands of research to provide a comprehensive and integrated framework for the design and performance evaluation of indoor mmWave systems. The paper introduces the framework with a status update on mmWave technology, including …
The growth in wireless traffic and mobility of devices have congested the core network significantly. This bottleneck, along with spectrum scarcity, made the conventional cellular networks insufficient for the dissemination of large contents. In this paper, we propose a novel scheme that enables efficient initialization of CCN-based D2D networks in the mmWave band through addressing decentralized D2D peer association and antenna beamwidth selection. The proposed scheme considers mmWave characteristics such as directional communication and blockage susceptibility. We propose a heuristic peer as…
The internet-of-things (IoT) environment connects different intelligent devices together and enables seamless data communication between the connected devices. Connected vehicles (CVs) are one of the primary example of the IoT, and the efficient, reliable, and safe operation of CVs demands a reliable wireless communication system, which can ensure high throughput and low communication latency. The 5G millimeter wave (5G mmWave) wireless communication network offers such benefits, which can be the enabler of CV applications, especially for dense urban areas with high number of CVs. In this stud…
With the severe spectrum shortage in conventional cellular bands, millimeter-wave (mmWave) frequencies have been attracting growing attention for next-generation micro- and picocellular wireless networks. A fundamental and open question is whether mmWave cellular networks are likely to be noise- or interference-limited. Identifying in which regime a network is operating is critical for the design of MAC and physical-layer procedures and to provide insights on how transmissions across cells should be coordinated to cope with interference. This work uses the latest measurement-based statistical …
With the severe spectrum shortage in conventional cellular bands, the millimeter (mmWave) frequencies, roughly above 10~GHz, have been attracting growing attention for next-generation micro- and pico- cellular wireless networks. A fundamental and open question is how these bands should be used by cellular operators. Cellular spectrum has been traditionally allocated following an exclusive ownership model. However, in this paper we argue that the distinct nature of mmWave communication -- the massive bandwidth degrees of freedom, directional isolation and high susceptibility to blockage -- sugg…
Fundamental requirements of mmWave systems are peak data rates of multiple Gbps and latencies of the order of at most a few milliseconds. However, highly directional mmWave links are susceptible to frequent link failures under stress conditions such as mobility and human blockage. Under these conditions, multi-hop routing can achieve reliable and robust performance. In this paper, we consider multi-hop millimeter wave (mmWave) wireless systems and propose proactive route refinement schemes that are particularly important under dynamic scenarios. First, we consider the AODV-type protocols and p…
In this paper, a novel proactive computing and mmWave communication for ultra-reliable and low latency wireless virtual reality (VR is proposed. By leveraging information about users' poses, proactive computing and caching are used to pre-compute and store users' HD video frames to minimize the computing latency. Furthermore, multi-connectivity is exploited to ensure reliable mmWave links to deliver users' requested HD frames. The performance of the proposed approach is validated on a VR network serving an interactive gaming arcade, where dynamic and real-time rendering of HD video frames is n…
In this paper, a novel framework is proposed for channel charting (CC)-aided localization in millimeter wave networks. In particular, a convolutional autoencoder model is proposed to estimate the three-dimensional location of wireless user equipment (UE), based on multipath channel state information (CSI), received by different base stations. In order to learn the radio-geometry map and capture the relative position of each UE, an autoencoder-based channel chart is constructed in an unsupervised manner, such that neighboring UEs in the physical space will remain close in the channel chart. Nex…
Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoenco…
