arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1505.04279cond-mat.mtrl-sci
收藏

电子束沉积超纯锗中缺陷的来源

The origin of defects induced in ultra-pure germanium by Electron Beam Deposition

Sergio M. M. Coelho, Juan F. R. Archilla, F. Danie Auret, Jackie M. Nel

摘要:

由亚阈值事件在各种半导体的晶格中产生点缺陷已经由许多组报道。这些观测已经用敏感的电子技术做了非常详细的研究,但仍有许多问题需要澄清。使用Ge和Si进行的实验表明,高能粒子,在电子束中的碰撞的产物,负责在两步能量转移过程中的电子束沉积(EBD)引起的缺陷的大部分。降低这些高能粒子与半导体在金属沉积过程中的碰撞的数量是使用静电屏蔽和优越的真空导致设备的缺陷浓度低于$ 10^{11}\,$ cm $^{-3}$,我们的深能级瞬态光谱(DLTS)系统的测量极限的组合。样品通常暴露于的高能电子和光子不受屏蔽的影响,因为这些粒子中的大多数源自金属靶,从而消除了这些粒子作为可能的损伤引起剂。目前尚不清楚有时可能小到2 eV的能量包如何传播到材料中高达$μ$ m,同时仍然保留足够的能量(即1 eV量级)以引起晶体的变化。这种缺陷引起的现象的操纵可能是开发未来应用的无缺陷材料的关键。

英文摘要:

The creation of point defects in the crystal lattices of various semiconductors by subthreshold events has been reported on by a number of groups. These observations have been made in great detail using sensitive electrical techniques but there is still much that needs to be clarified. Experiments using Ge and Si were performed that demonstrate that energetic particles, the products of collisions in the electron beam, were responsible for the majority of electron-beam deposition (EBD) induced defects in a two-step energy transfer process. Lowering the number of collisions of these energetic particles with the semiconductor during metal deposition was accomplished using a combination of static shields and superior vacuum resulting in devices with defect concentrations lower than $ 10^{11}\,$cm$^{-3}$, the measurement limit of our deep level transient spectroscopy (DLTS) system. High energy electrons and photons that samples are typically exposed to were not influenced by the shields as most of these particles originate at the metal target thus eliminating these particles as possible damage causing agents. It remains unclear how packets of energy that can sometimes be as small of 2eV travel up to a $μ$m into the material while still retaining enough energy, that is, in the order of 1eV, to cause changes in the crystal. The manipulation of this defect causing phenomenon may hold the key to developing defect free material for future applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑