As a new two-dimensional layered material, black phosphorus (BP) is a promising material for nanoelectronics and nano-optoelectronics. We use Raman spectroscopy and first-principles theory to report our findings related to low-frequency (LF) interlayer breathing modes (<100 cm-1) in few-layer BP for the first time. The breathing modes are assigned to Ag symmetry by the laser polarization dependence study and group theory analysis. Compared to the high-frequency (HF) Raman modes, the LF breathing modes are much more sensitive to interlayer coupling and thus their frequencies show much stronger dependence on the number of layers. Hence, they could be used as effective means to probe both the crystalline orientation and thickness for few-layer BP. Furthermore, the temperature dependence study shows that the breathing modes have a harmonic behavior, in contrast to HF Raman modes which are known to exhibit anharmonicity.
The interlayer breathing and shear modes in few-layer black phosphorus are investigated for their symmetry and lattice dynamical properties. The symmetry groups for the even-layer and odd-layer few-layer black phosphorus are utilized to determine the irreducible representation and the infrared and Raman activity for the interlayer modes. The valence force field model is applied to calculate the eigenvectorw and frequencies for the interlayer breathing and shear modes, which are explained using the atomic chain model. The anisotropic puckered configuration for black phosphorus leads to a highly…
Twisted stacked few layer black phosphorus heterostructures were successfully fabricated in this work. Abnormal blue shifts in their Ag1 and Ag2 Raman peaks and unique optical reflections were observed in these samples. The phonon behavior difference can be explained by our density functional theory calculations, which suggest that interlayer coupling has a significant effect in twisted bilayer black phosphorus. According to the calculations, the interlayer interactions are not simply van der Waals interactions. Additional interactions, such as weak valence bonding between the top and bottom f…
Bulk black phosphorus (BP) consists of puckered layers of phosphorus atoms. Few-layer BP, obtained from bulk BP by exfoliation, is an emerging candidate as a channel material in post-silicon electronics. A deep understanding of its physical properties and its full range of applications are still being uncovered. In this paper, we present a theoretical and experimental investigation of phonon properties in few-layer BP, focusing on the low-frequency regime corresponding to interlayer vibrational modes. We show that the interlayer breathing mode A3g shows a large redshift with increasing thickne…
Layered materials have huge potential in various applications due to their extraordinary properties. To determine the interlayer interaction (or equivalently the layer spacing under different perturbations) is of critical importance. In this letter, we focus on one of the most prominent layered materials, graphite, and theoretically quantify the relationship between its interlayer spacing and the vibrational frequencies of its layer breathing and shear modes, which are measures of the interlayer interaction. The method used here to determine the interlayer interaction can be further applied to…
The low formation energy of atomic vacancies in black phosphorus allows it to serve as an ideal prototypical system for exploring the dynamics of interlayer interstitial-vacancy (I-V) pairs (i.e. Frenkel defects) which account for Wigner energy release. Based on a few-layer model of black phosphorus, we conduct discrete geometry analysis and investigate the structural dynamics of intimate interlayer Frenkel pairs from first-principles calculations. We reveal a highly metastable I-V pair state driven by anisotropic dipole-like strain fields which can build strong connections between neighbourin…
We investigate magnetism and band structure engineering in Moiré superlattice of blue phosphorus ($β$-P) and grey arsenene ($β$-As) bilayers, using \textit{ab initio} calculations. The electronic states near the valence and conduction band edges have significant $p_z$ character in both the bilayers. Thus, twisting the layers significantly reduce the interlayer orbital overlap, leading to a decrease in the binding energy (up to $\sim33\%$) and an increase in interlayer distance (up to $\sim10\%$), compared to the most stable AA-stacking. This interlayer decoupling also results in a notable incr…
The Lennard-Jones potential is widely used to describe the interlayer interactions within layered materials like graphene. However, it is also widely known that this potential strongly underestimates the frictional properties for layered materials. Here we propose to supplement the Lennard-Jones potential by a Gaussian-type potential, which enables more accurate calculations of the frictional properties of two-dimensional layered materials. Furthermore, the Gaussian potential is computationally simple as it introduces only one additional potential parameter that is determined by the interlayer…
Two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have recently attracted tremendous interest as potential valleytronic and nano-electronic materials, in addition to being well-known as excellent lubricants in the bulk. The interlayer van der Waals (vdW) coupling and low frequency phonon modes, and how they evolve with the number of layers, are important for both the mechanical and electrical properties of 2D TMDs. Here we uncover the ultra-low frequency interlayer breathing and shear modes in few-layer MoS2 and WSe2, prototypical layered TMDs, using both Raman spectroscopy …
Interlayer interactions in 2D materials, also known as van der Waals (vdWs) interactions, play a critical role in the physical properties of layered materials. It is fascinating to manipulate the vdWs interaction, and hence to "redefine" the material properties. Here, we demonstrate that in-plane biaxial strain can effectively tune the vdWs interaction of few-layer black phosphorus with thickness of 2-10 layers, using infrared spectroscopy. Surprisingly, our results reveal that in-plane tensile strain efficiently weakens the interlayer coupling, even though the sample shrinks in the vertical d…
Stacking two-dimensional (2D) materials into multi-layers or heterostructures, known as van der Waals (vdW) epitaxy, is an essential degree of freedom for tuning their properties on demand. Few-layer black phosphorus (FLBP), a material with high potential for nano- and optoelectronics applications, appears to have interlayer couplings much stronger than graphene and other 2D systems. Indeed, these couplings call into question whether the stacking of FLBP can be governed only by vdW interactions, which is of crucial importance for epitaxy and property refinement. Here, we perform a theoretical …
An outstanding challenge of theoretical electronic structure is the description of van der Waals (vdW) interactions in molecules and solids. Renewed interest in resolving this is in part motivated by the technological promise of layered systems including graphite, transition metal dichalcogenides, and more recently, black phosphorus, in which the interlayer interaction is widely believed to be dominated by these types of forces. We report a series of quantum Monte Carlo (QMC) calculations for bulk black phosphorus and related few-layer phosphorene, which elucidate the nature of the forces that…
The recent renaissance of black phosphorus (BP) as a two-dimensional 2D layered material has generated tremendous interest in its tunable electronic band gap and highly anisotropic transport properties that offer new opportunities for device applications. Many of these outstanding properties are attributed to its unique structural characters that still need elucidation. Here we show Raman measurements that reveal an ultralow-frequency collective compression mode (CCM), which is unprecedented among similar 2D layered materials. This novel CCM indicates an unusually strong interlayer coupling in…
Relative out of plane displacements of the constituent layers of two dimensional materials gives rise to unique low frequency breathing modes. By computing the height-height correlation functions in momentum space, we show that, the layer breathing modes (LBMs) can be mapped consistently to vibrations of a simple linear chain model. Our calculated thickness dependence of LBM frequencies for few layer (FL) graphene and molybdenum disulphide (MoS$_{2}$) are in excellent agreement with available experiments. Our results show a redshift of LBM frequency with increase in temperature, which is a dir…
Black phosphorus (BP) exhibits highly anisotropic properties and dynamical behavior that are unique even among two-dimensional and van der Waals (vdW) layered materials. Here, we show that an interlayer lattice contraction and concerted, symmetric intralayer vibrations take place concurrently within few picoseconds following the photoinjection and relaxation of carriers, using ultrafast electron diffraction in the reflection geometry to probe the out-of-plane motions. A strong coupling between the photocarriers and BP's puckered structure, with the alignment of the electronic band structure, i…
We study theoretically the structural and electronic response of layered bulk black phosphorus to in-layer strain. Ab initio density functional theory (DFT) calculations reveal that the strain energy and interlayer spacing display a strong anisotropy with respect to the uniaxial strain direction. To correctly describe the dependence of the fundamental band gap on strain, we used the computationally more involved GW quasiparticle approach that is free of parameters and superior to DFT studies, which are known to underestimate gap energies. We find that the band gap depends sensitively on the in…
Two pressure-induced phase transitions have been theoretically studied in the layered iron phosphorus triselenide (FePSe3). Topological analysis of chemical bonding in FePSe3 has been performed based on the results of first-principles calculations within the periodic linear combination of atomic orbitals (LCAO) method with hybrid Hartree-Fock-DFT B3LYP functional. The first transition at about 6 GPa is accompanied by the symmetry change from R-3 to C2/m, whereas the semiconductor-to-metal transition (SMT) occurs at about 13 GPa leading to the symmetry change from C2/m to P-31m. We found that t…
Multilayer graphene (MLG) grown by chemical vapor deposition (CVD) is a promising material for electronic and optoelectronic devices. Understanding the stacking configuration and interlayer coupling of MLGs is technologically relevant and of importance for the device applications. Here, we reported a kind of twisted MLGs (tMLGs), which are formed by stacking one graphene monolayer on the top of AB-stacked MLG by rotating a certain angle between them. The twist angle of tMLGs are identified by the twist-related modes, R and R'. With increasing the total layer number of N, the observed interlaye…
We investigated interlayer phonon modes of mechanically exfoliated few-layer 2H-SnS2 samples by using room temperature low-frequency micro-Raman spectroscopy. Raman measurements were performed using laser wavelength of 441.6, 514.4, 532 and 632.8 nm with power below 100 uW and inside a vacuum chamber to avoid photo-oxidation. The intralayer Eg and A1g modes are observed at ~206 cm-1 and ~314 cm-1, respectively, but the Eg mode is much weaker for all excitation energies. The A1g mode exhibits strong resonant enhancement for the 532 nm (2.33 eV) laser. In the low-frequency region, interlayer vib…
The temperature dependence of the band gap is crucial to a semiconductor. Bulk black phosphorus (BP) is known to exhibit an anomalous behavior. Through optical spectroscopy, here we show that the temperature effect on BP band gap gradually evolves with decreasing layer number, eventually turns into a normal one in the monolayer limit, rendering a crossover from the anomalous to the normal. Meanwhile, the temperature-induced shift in optical resonance also differs with different transition indices for the same thickness sample. A comprehensive analysis reveals that the temperature-tunable inter…
The competition between the electron-hole Coulomb attraction and the three-dimensional dielectric screening dictates the optical properties of layered semiconductors. In low-dimensional materials, the equilibrium dielectric environment can be significantly altered by the ultrafast excitation of photo-carriers, leading to renormalized band gap and exciton binding energies. Recently, black phosphorus emerged as a 2D material with strongly layer-dependent electronic properties. Here, we resolve the coherent response of screening to sub-gap photo-excitation in bulk black phosphorus and find that m…
Raman spectroscopy is the prime non-destructive characterization tool for graphene and related layered materials. The shear (C) and layer breathing modes (LBMs) are due to relative motions of the planes, either perpendicular or parallel to their normal. This allows one to directly probe the interlayer interactions in multilayer samples. Graphene and other two-dimensional (2d) crystals can be combined to form various hybrids and heterostructures, creating materials on demand with properties determined by the interlayer interaction. This is the case even for a single material, where multilayer s…
In this work, we study structural and vibrational properties of multilayer graphene using density-functional theory (DFT) with van der Waals (vdW) functionals. Initially, we analyze how different vdW functionals compare by evaluating the lattice parameters, elastic constants and vibrational frequencies of low energy optical modes of graphite. Our results indicate that the vdW-DF1-optB88 functional has the best overall performance on the description of vibrational properties. Next, we use this functional to study the influence of the vdW interactions on the structural and vibrational properties…
We report a comparative study of rigid layer Raman-active modes in $N$-layer transition metal dichalcogenides. Trigonal prismatic (2Hc, such as MoSe$_2$, MoTe$_2$, WS$_2$, WSe$_2$) and distorted octahedral (1T', such as ReS$_2$ and ReSe$_2$) phases are considered. The Raman-active in-plane interlayer shear modes and out-of-plane interlayer breathing modes appear as well-defined features with wavenumbers in the range 0-40~cm$^{-1}$. These rigid layer modes are well-described by an elementary linear chain model from which the interlayer force constants are readily extracted. Remarkably, these fo…
By performing \emph{ab initio} calculations for one- to four-layer black phosphorus within the $GW$ approximation, we obtain a significant difference in the band gap ($\sim$1.5 eV), which is in line with recent experimental data. The results are analyzed in terms of the constructed four-band tight-binding model, which gives accurate descriptions of the mono- and bilayer band structure near the band gap, and reveal an important role of the interlayer hoppings, which are largely responsible for the obtained gap difference.
The Poisson's ratio of a material characterizes its response to uniaxial strain. Materials normally possess a positive Poisson's ratio - they contract laterally when stretched, and expand laterally when compressed. A negative Poisson's ratio is theoretically permissible but has not, with few exceptions of man-made bulk structures, been experimentally observed in any natural materials. Here, we show that the negative Poisson's ratio exists in the low-dimensional natural material black phosphorus, and that our experimental observations are consistent with first principles simulations. Through ap…
The anisotropic two-dimensional (2D) van der Waals (vdW) layered materials, with both scientific interest and potential application, have one more dimension to tune the properties than the isotropic 2D materials. The interlayer vdW coupling determines the properties of 2D multi-layer materials by varying stacking orders. As an important representative anisotropic 2D materials, multilayer rhenium disulfide (ReS2) was expected to be random stacking and lack of interlayer coupling. Here, we demonstrate two stable stacking orders (aa and a-b) of N layer (NL, N>1) ReS2 from ultralow-frequency and h…
We present micromagnetic simulations of the dynamic GHz-range resonance modes of skyrmions excited by either out-of-plane ac magnetic fields or spin torques in prototypical synthetic ferri- and antiferromagnetic trilayer structures. The observed features in the calculated power spectra exhibit a systematic dependence on the coupling strength between the individual magnetic layers and are related to pure in-phase and anti-phase breathing modes as well as to hybridizations of breathing and spin-wave modes that are characteristic for the considered circular-shaped geometry. The experimental detec…
We perform molecular dynamics simulations to study the registry effect on the thermal conductivity of few-layer graphene. The interlayer interaction is described by either the Lennard-Jones potential or the registry-dependent potential. Our calculations show that the thermal conductivity in few-layer graphene from both potentials are close to each other, i.e the registry effect is essentially not important. It is because the thermal transport in few-layer graphene is mainly limited by the interlayer breathing mode, which is insensitive to the registry.
Through infrared spectroscopy, we systematically study the pressure effect on electronic structures of few-layer black phosphorus (BP) with layer number ranging from 2 to 13. We reveal that the pressure-induced shift of optical transitions exhibits strong layer-dependence. In sharp contrast to the bulk counterpart which undergoes a semiconductor to semimetal transition under ~1.8 GPa, the bandgap of 2 L increases with increasing pressure until beyond 2 GPa. Meanwhile, for a sample with a given layer number, the pressure-induced shift also differs for transitions with different indices. Through…
The lubricating ability of graphite largely depends on the environmental humidity, essentially the amount of water in between its layers. In general, intercalated molecules in layered materials modify their extraordinary properties by interacting with the layers. To understand the interaction of intercalated water molecules with graphene layers, we performed Raman measurements on bi-layer graphene at various humidity levels and observed an additional peak close to that of the low-frequency layer breathing mode between two graphene layers. The additional peak is attributed to the vibration betw…
Anisotropy describes the directional dependence of a material's properties such as transport and optical response. In conventional bulk materials, anisotropy is intrinsically related to the crystal structure, and thus not tunable by the gating techniques used in modern electronics. Here we show that, in bilayer black phosphorus with an interlayer twist angle of 90°, the anisotropy of its electronic structure and optical transitions is tunable by gating. Using first-principles calculations, we predict that a laboratory-accessible gate voltage can induce a hole effective mass that is 30 times la…
Layered materials (LMs), such as graphite, hexagonal boron nitride, and transition-metal dichalcogenides, are at the centre of an ever increasing research effort, due to their scientific and technological relevance. Raman and infrared spectroscopies are accurate, non-destructive, approaches to determine a wide range of properties, including the number of layers and the strength of the interlayer interactions. Here, we present a general approach to predict the complete spectroscopic fan diagrams, i.e., the relations between frequencies and number of layers, $N$, for the optically-active shear a…
The effect of the number of stacking layers and the type of stacking on the electronic and optical properties of bilayer and trilayer black phosphorus are investigated by using first principles calcula- tions within the framework of density functional theory. We find that inclusion of many body effects (i.e., electron-electron and electron-hole interactions) modifies strongly both the electronic and opti- cal properties of black phosphorus. While trilayer black phosphorus with a particular stacking type is found to be a metal by using semilocal functionals, it is predicted to have an electroni…
The charge, spin, and composition degrees of freedom in high-entropy alloy endow it with tunable valence and spin states, infinite combinations and excellent mechanical performance. Meanwhile, the stacking, interlayer, and angle degrees of freedom in van der Waals material bring it with exceptional features and technological applications. Integration of these two distinct material categories while keeping their merits would be tempting. Based on this heuristic thinking, we design and explore a new range of materials (i.e., dichalcogenides, halides and phosphorus trisulfides) with multiple meta…
ReS$_2$ has recently emerged as a new member in the rapidly growing family of two-dimensional materials. Unlike MoS$_2$ or WSe$_2$, the optical and electrical properties of ReS$_2$ are not isotropic due to the reduced symmetry of the crystal. Here, we present layer-dependent Raman measurements of ReS$_2$ samples ranging from monolayers to ten layers in the ultralow frequency regime. We observe layer breathing and shear modes which allow for easy assignment of the number of layers. Polarization-dependent measurements give further insight into the crystal structure and reveal an energetic shift …
We report first principle calculations of electronic and mechanical properties of few-layer borophene with the inclusion of interlayer van der Waals (vdW) interaction. The anisotropic metallic behaviors are preserved from monolayer to few-layer structures. The energy splitting of bilayer borophene at $Γ$ point near the Fermi level is about 1.7 eV, much larger than the values (0.5--1 eV) of other layered semiconductors, indicating much stronger vdW interactions in metallic layered borophene. In particular, the critical strains are enhanced by increasing the number of layers, leading to much mor…
Atomically thin, two-dimensional (2D) indium selenide (InSe) has attracted considerable attention due to large tunability in the band gap (from 1.4 to 2.6 eV) and high carrier mobility. The intriguingly high dependence of band gap on layer thickness may lead to novel device applications, although its origin remains poorly understood, and generally attributed to quantum confinement effect. In this work, we demonstrate via first-principles calculations that strong interlayer coupling may be mainly responsible for this phenomenon, especially in the fewer-layer region, and it could also be an esse…
We investigate the interlayer phonon modes in $N$-layer rhenium diselenide (ReSe$_2$) and rhenium disulfide (ReS$_2$) by means of ultralow-frequency micro-Raman spectroscopy. These transition metal dichalcogenides exhibit a stable distorted octahedral (1T') phase with significant in-plane anisotropy, leading to sizable splitting of the (in-plane) layer shear modes. The fan-diagrams associated with the measured frequencies of the interlayer shear modes and the (out-of-plane) interlayer breathing modes are perfectly described by a finite linear chain model and allow the determination of the inte…
Graphene/MoS$_2$ van der Waals (vdW) heterostructures have promising technological applications due to their unique properties and functionalities. Many experimental and theoretical research groups across the globe have made outstanding contributions to benchmark the properties of graphene/MoS$_2$ heterostructures. Even though some research groups have already made an attempt to model the graphene/MoS$_2$ heterostructures using {\it first-principles} calculations, there exists several discrepancies in the results from different theoretical research groups and the experimental findings. In the …
Talc is an insulating layered material that is stable at ambient conditions and has high-quality basal cleavage, which is a major advantage for its use in van der Waals heterostructures. Here, we use near-field synchrotron infrared nanospectroscopy, Raman spectroscopy, and first-principles calculations to investigate the structural and vibrational properties of talc crystals, ranging from monolayer to bulk, in the 300-750 cm-1 and <60 cm-1 spectral windows. We observe a symmetry crossover from mono to bilayer talc samples, attributed to the stacking of adjacent layers. The in-plane lattice par…
We systematically study the high-resolution and polarized Raman spectra of multilayer (ML) MoTe2. The layer-breathing (LB) and shear (C) modes are observed in the ultralow-frequency region, which are used to quantitatively evaluate the interlayer coupling in ML MoTe2 based on the linear chain model, in which only the nearest interlayer coupling is considered. The Raman spectra on three different substrates verify the negligible substrate effect on the phonon frequencies of ML MoTe2. Ten excitation energies are used to measure the high-frequency modes of N-layer MoTe2 (NL MoTe2; N is an integer…
We report on room-temperature Raman scattering measurements in few-layer crystals of exfoliated molybdenum ditelluride (MoTe$_{2}$) performed with the use of 632.8 nm (1.96 eV) laser light excitation. In agreement with recent study reported by G. Froehlicher et al, (2015 $Nano$ $Lett.$ 15 6481) we observe a complex structure of the out-of-plane vibrational modes (A$_{1g}$/A$^{'}_{1}$), which can be explained in terms of interlayer interactions between single atomic planes of MoTe$_{2}$. In the case of low-energy shear and breathing modes of rigid interlayer vibrations it is shown that their en…
Two-dimensional (2D) transition metal dichalcogenide (TMD) nanosheets exhibit remarkable electronic and optical properties. The 2D features, sizable bandgaps, and recent advances in the synthesis, characterization, and device fabrication of the representative MoS$_2$, WS$_2$, WSe$_2$, and MoSe$_2$ TMDs make TMDs very attractive in nanoelectronics and optoelectronics. Similar to graphite and graphene, the atoms within each layer in 2D TMDs are joined together by covalent bonds, while van der Waals interactions keep the layers together. This makes the physical and chemical properties of 2D TMDs …
III-VI post-transition metal chalcogenides (InSe and GaSe) are a new class of layered semiconductors, which feature a strong variation of size and type of their band gaps as a function of number of layers (N). Here, we investigate exfoliated layers of InSe and GaSe ranging from bulk crystals down to monolayer, encapsulated in hexagonal boron nitride, using Raman spectroscopy. We present the N-dependence of both intralayer vibrations within each atomic layer, as well as of the interlayer shear and layer breathing modes. A linear chain model can be used to describe the evolution of the peak posi…
The tunability of the interlayer coupling by twisting one layer with respect to another layer of two-dimensional materials provides a unique way to manipulate the phonons and related properties. We refer to this engineering of phononic properties as "Twistnonics". We study the effects of twisting on low-frequency shear (SM) and layer breathing (LBM) modes in transition metal dichalcogenide (TMD) bilayer using atomistic classical simulations. We show that these low-frequency modes are extremely sensitive to twist and can be used to infer the twist angle. We find unique "ultra-soft" phason modes…
Few-layer Tellurium, an elementary semiconductor, succeeds most of striking physical properties that black phosphorus (BP) offers and could be feasibly synthesized by simple solution-based methods. It is comprised of non-covalently bound parallel Te chains, among which covalent-like feature appears. This feature is, we believe, another demonstration of the previously found covalent-like quasi-bonding (CLQB) where wavefunction hybridization does occur. The strength of this inter-chain CLQB is comparable with that of intra-chain covalent bonding, leading to closed stability of several Te allotro…
Titanium trisulfide (TiS3) has recently attracted the interest of the 2D community as it presents a direct bandgap of ~1.0 eV, shows remarkable photoresponse, and has a predicted carrier mobility up to 10000 cm2V-1 s-1. However, a study of the vibrational properties of TiS3, relevant to understanding the electron-phonon interaction which can be the main mechanism limiting the charge carrier mobility, is still lacking. In this work, we take the first steps to study the vibrational properties of TiS3 through temperature dependent Raman spectroscopy measurements of TiS3 nanoribbons and nanosheets…
$N$-layer transition metal dichalcogenides provide a unique platform to investigate the evolution of the physical properties between the bulk (three dimensional) and monolayer (quasi two-dimensional) limits. Here, using high-resolution micro-Raman spectroscopy, we report a unified experimental description of the $Γ$-point optical phonons in $N$-layer $2H$-molybdenum ditelluride (MoTe$_2$). We observe a series of $N$-dependent low-frequency interlayer shear and breathing modes (below $40~\rm cm^{-1}$, denoted LSM and LBM) and well-defined Davydov splittings of the mid-frequency modes (in the ra…
