We present a new definition of defects which is based on a Riemannian formulation of incompatible elasticity. Defects are viewed as local deviations of the material's reference metric field, $\bar{\mathfrak{g}}$, from a Euclidian metric. This definition allows the description of defects in amorphous materials and the formulation of the elastic problem, using a single field, $\bar{\mathfrak{g}}$. We provide a multipole expansion of reference metrics that represent a large family of two-dimensional (2D) localized defects. The case of a dipole, which corresponds to an edge dislocation is studied analytically, experimentally and numerically. The quadrupole term, which is studied analytically, as well as higher multipoles of curvature carry local deformations. These multipoles are good candidates for fundamental strain carrying entities in plasticity theories of amorphous materials and for a continuous modeling of recently developed meta-materials.
The microscopic mechanism by which amorphous solids yield plastically under an externally applied stress or deformation has remained elusive in spite of enormous research activity in recent years. Most approaches have attempted to identify atomic-scale structural "defects" or spatio-temporal correlations in the undeformed glass that may trigger plastic instability. In contrast, here we show that the topological defects which correlate with plastic instability can be identified, not in the static structure of the glass, but rather in the nonaffine displacement field under deformation. These dis…
The yielding transition of amorphous materials is studied with a two-dimensional Hamiltonian model that allows both shear and volume deformations. The model is investigated as a function of the relative value of the bulk modulus $B$ with respect to the shear modulus $μ$. When the ratio $B/μ$ is small enough, the yielding transition becomes discontinuous, yet reversible. If the system is driven at constant strain rate in the coexistence region, a spatially localized shear band is observed while the rest of the system remains blocked. The crucial role of volume fluctuations in the origin of this…
Shanghai Jiao Tong University（上海交通大学）；Johns Hopkins University（约翰斯·霍普金斯大学）；University of Montpellier and CNRS（蒙彼利埃大学与法国国家科学研究中心）；Chengdu University of Technology（成都理工大学）
Structural defects within amorphous packings of symmetric particles can be characterized using a machine learning approach that incorporates structure functions of radial distances and angular arrangement. This yields a scalar field, \emph{softness}, that correlates with the probability that a particle is about to rearrange. However, when particle shapes are elongated, as in the case of dimers and ellipses, we find the standard structure functions produce imprecise softness measurements. Moreover, ellipses exhibit deformation profiles in stark contrast to circular particles. In order to accoun…
We examine the regime between crystalline and amorphous packings of anisotropic objects on surfaces of different genus by continuously varying their size distribution or shape from monodispersed spheres to bidispersed mixtures or monodispersed ellipsoidal particles; we also consider an anisotropic variant of the Thomson problem with a mixture of charges. With increasing anisotropy, we first observe the disruption of translational order with an intermediate orientationally ordered hexatic phase as proposed by Nelson, Rubinstein and Spaepen, and then a transition to amorphous state. By analyzing…
The vibrational density of states $D(ω)$ of solids controls their thermal and transport properties. In crystals, the low-frequency modes are extended phonons distributed in frequency according to Debye's law, $D(ω) \propto ω^2$. In amorphous solids, phonons are damped, and at low frequency $D(ω)$ comprises extended modes in excess over Debye's prediction, leading to the so-called boson peak in $D(ω)/ω^2$ at $ω_{\rm bp}$, and quasi-localized (QLMs) ones. Here we show that boson peak and phonon attenuation in the Rayleigh scattering regime are related, as suggested by correlated fluctuating elas…
Plasticity in amorphous solids is mediated by localized quadrupolar instabilities, but the mechanism by which an amorphous solid eventually fails or melts is debated. In this work we argue that these phenomena can be investigated in the model problem of an elastic continuum with quadrupolar defects, at finite temperature. This problem is posed and the collective behavior of the defects is analytically investigated. Using both renormalization group and field-theoretic techniques, it is found that the model has a yielding/melting transition of spinodal type.
A wide range of materials can exist in microscopically disordered solid forms, referred to as amorphous solids or glasses. Such materials -- oxide glasses and metallic glasses, to polymer glasses, and soft solids such as colloidal glasses, emulsions and granular packings -- are useful as structural materials in a variety of contexts. Their deformation and flow behaviour is relevant for many others. Apart from fundamental questions associated with the formation of these solids, comprehending their mechanical behaviour is thus of interest, and of significance for their use as materials. In parti…
This paper presents a set of general strategies for the analysis of structure in amorphous materials and a general approach to assessing the utility of a selected structural description. Measures of structural diversity and utility are defined and applied to two model glass forming binary atomic alloys. In addition, a new measure of incipient crystal-like organization is introduced, suitable for cases where the stable crystal is a compound structure.
We consider the slow and athermal deformations of amorphous solids and show how the ensuing sequence of discrete plastic rearrangements can be mapped onto a directed network. The network topology reveals a set of highly connected regions joined by occasional one-way transitions. The highly connected regions include hierarchically organized hysteresis cycles and sub-cycles. At small to moderate strains this organization leads to near-perfect return point memory. The transitions in the network can be traced back to localized particle rearrangements (soft-spots) that interact via Eshelby-type def…
We present a thorough study of the plastic response of a granular material progressively loaded. We study experimentally the evolution of the plastic field from a homogeneous one to an heterogeneous one and its fluctuations in term of incremental strain. We show that the plastic field can be decomposed in two components evolving on two decoupled strain increment scales. We argue that the slowly varying part of the field can be identified to the so-called fluidity field introduced recently to interpret the rheological behaviour of amorphous materials. This fluidity field progressively concentra…
The phonon spectra of solids, described through the measurable vibrational density of states (VDOS), provide a wealth of information about the underlying atomic structure and bonding, and they determine fundamental macroscopic properties such as specific heat, thermal conductivity and superconductivity. In amorphous solids, structural disorder generates a number of poorly understood phenomena that are absent in crystals. Starting from an effective field theory description which accounts for disorder in terms of momentum diffusion, we provide a unified theoretical description of the VDOS of amo…
Amorphous solids lack long-range order. Therefore identifying structural defects -- akin to dislocations in crystalline solids -- that carry plastic flow in these systems remains a daunting challenge. By comparing many different structural indicators in computational models of glasses, under a variety of conditions we carefully assess which of these indicators are able to robustly identify the structural defects responsible for plastic flow in amorphous solids. We further demonstrate that the density of defects changes as a function of material preparation and strain in a manner that is highly…
The importance of mesoscale fluctuations in flowing amorphous materials is widely accepted, without a clear understanding of their role. We propose a mean-field elastoplastic model that admits both stress and strain-rate fluctuations, and investigate the character of its power distribution under steady shear flow. The model predicts the suppression of negative power fluctuations near the liquid-solid transition; the existence of a fluctuation relation in limiting regimes but its replacement in general by stretched-exponential power-distribution tails; and a crossover between two distinct mecha…
The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable. We study theoretically how such brittleness emerges in athermal, quasi-statically driven, materials as their initial stability is increased. We show that this emergence is well reproduced by elasto-plastic models and is predicted by a mean field approximation, where it corresponds to a continuous transition. In mean field, failure can be forecasted from the a…
We propose a framework that unifies the description of light transport in three-dimensional amorphous dielectric materials that exhibit both localization and a photonic bandgap. To this end, we argue that coherent reflection near and in the bandgap attenuates the generation of diffuse or localized photons. Using the self-consistent theory of localization and considering the density of states of photons, we can quantitatively describe all transport regimes: Transparency, light diffusion, localization, and bandgap. Comparing the model with numerical data on optical transport in hyperuniform diel…
The University of Chicago（芝加哥大学）；MIT（麻省理工学院）；Brown University（布朗大学）；University of California, Santa Barbara（加利福尼亚大学圣巴巴拉分校）；Flatiron Institute（弗莱提荣研究所）
It is difficult to quantify structure-property relationships and to identify structural features of complex materials. The characterization of amorphous materials is especially challenging because their lack of long-range order makes it difficult to define structural metrics. In this work, we apply deep learning algorithms to accurately classify amorphous materials and characterize their structural features. Specifically, we show that convolutional neural networks and message passing neural networks can classify two-dimensional liquids and liquid-cooled glasses from molecular dynamics simulati…
We review 15 years of theoretical and experimental work on the non-linear response of glassy systems. We argue that an anomalous growth of the peak value of non-linear susceptibilities is a signature of growing "amorphous order" in the system, with spin-glasses as a case in point. Experimental results on supercooled liquids are fully compatible with the RFOT prediction of compact "glassites" of increasing volume as temperature is decreased, or as the system ages. We clarify why such a behaviour is hard to explain within purely kinetic theories of glass formation, despite recent claims to the c…
We combine an analytically solvable mean-field elasto-plastic model with molecular dynamics simulations of a generic glass-former to demonstrate that, depending on their preparation protocol, amorphous materials can yield in two qualitatively distinct ways. We show that well-annealed systems yield in a discontinuous brittle way, as metallic and molecular glasses do. Yielding corresponds in this case to a first-order nonequilibrium phase transition. As the degree of annealing decreases, the first-order character becomes weaker and the transition terminates in a second-order critical point in th…
