Current analytical and numerical modelling suggest the existence of ubiquitous thin current sheets in the corona that could explain the observed heating requirements. On the other hand, new high resolution observations of the corona indicate that its magnetic field may tend to organise itself in fine strand-like structures of few hundred kilometres widths. The link between small structure in models and the observed widths of strand-like structure several orders of magnitude larger is still not clear. A popular theoretical scenario is the nanoflare model, in which each strand is the product of an ensemble of heating events. Here, we suggest an alternative mechanism for strand generation. Through forward modelling of 3D MHD simulations we show that small amplitude transverse MHD waves can lead in a few periods time to strand-like structure in loops in EUV intensity images. Our model is based on previous numerical work showing that transverse MHD oscillations can lead to Kelvin-Helmholtz instabilities that deform the cross-sectional area of loops. While previous work has focused on large amplitude oscillations, here we show that the instability can occur even for low wave amplitudes for long and thin loops, matching those presently observed in the corona. We show that the vortices generated from the instability are velocity sheared regions with enhanced emissivity hosting current sheets. Strands result as a complex combination of the vortices and the line-of-sight angle, last for timescales of a period and can be observed for spatial resolutions of a tenth of loop radius.
It has been found that the Kelvin-Helmholtz instability (KHI) induced by both transverse and torsional oscillations in coronal loops can reinforce the effects of wave heating. In this study, we model a coronal loop as a system of individual strands, and we study wave heating effects by considering a combined transverse and torsional driver at the loop footpoint. We deposit the same energy into the multi-stranded loop and an equivalent monolithic loop, and then observe a faster increase in the internal energy and temperature in the multi-stranded model. Therefore, the multi-stranded model is mo…
Previous work utilising NASA's High-resolution Coronal Imager (Hi-C 2.1) 17.2 nm observations revealed that, even at the increased spatial scales available in the data-set, there may be evidence for coronal structures that are still not fully resolved. In this follow-up study, cross-section slices of coronal strands are taken across the Hi-C 2.1 field-of-view. Following previous loop width studies, the background emission is removed to isolate the coronal strands. The resulting intensity variations are reproduced by simultaneously fitting multiple Gaussian profiles using a non-linear least-squ…
Coronal loops form the basic building blocks of the magnetically closed solar corona yet much is still to be determined concerning their possible fine-scale structuring and the rate of heat deposition within them. Using an improved multi-stranded loop model to better approximate the numerically challenging transition region, this paper examines synthetic NASA Solar Dynamics Observatory's (SDO) Atmospheric Imaging Assembly (AIA) emission simulated in response to a series of prescribed spatially and temporally random, impulsive and localised heating events across numerous sub-loop elements with …
Coronal loop observations have existed for many decades yet the precise shape of these fundamental coronal structures is still widely debated since the discovery that they appear to undergo negligible expansion between their footpoints and apex. In this work a selection of eight EUV loops and their twenty-two sub-element strands are studied from the second successful flight of NASA's High resolution Coronal Imager (Hi-C 2.1). Four of the loops correspond to open fan structures with the other four considered to be magnetically closed loops. Width analysis is performed on the loops and their sub…
Some high-resolution observations have revealed that the active-region solar corona is filled with myriads of thin strands even in apparently uniform regions with no resolved loops. This fine structure can host collective oscillations involving a large portion of the corona due to the coupling of the motions of the neighbouring strands. We study these vibrations and the possible observational effects. Here we theoretically investigate the collective oscillations inherent to the fine structure of the corona. We have called them fundamental vibrations because they cannot exist in a uniform mediu…
In recent years, omni-present transverse waves have been observed in all layers of the solar atmosphere. Coronal loops are often modeled as a collection of individual strands, in order to explain their thermal behaviour and appearance. We perform 3D ideal MHD simulations to study the effect of a continuous small amplitude transverse footpoint driving on the internal structure of a coronal loop composed of strands. The output is also converted to synthetic images, corresponding to the AIA 171 A and 193 A passbands, using FoMo. We show that the multi-stranded loop ceases to exist in the traditio…
In the quest to solve the long-standing coronal heating problem, it has been suggested half a century ago that coronal loops could be heated by waves. Despite the accumulating observational evidence of the possible importance of coronal waves, still no 3D MHD simulations exist that show significant heating by MHD waves. Here we report on the first 3D coronal loop model heating the plasma against radiative cooling. The coronal loop is driven at the footpoint by transverse oscillations and subsequently the induced Kelvin-Helmholtz instability deforms the loop cross-section and generates small-sc…
It is well established that the transverse MHD waves are ubiquitous in the solar corona. One of the possible mechanisms for heating both open (e.g. coronal holes) and closed (e.g. coronal loops) magnetic field regions of the solar corona is due to the MHD wave-driven turbulence. In this work, we have studied the variation in the filling factor of overdense structures in the solar corona due to the generation of the transverse MHD wave-driven turbulence. Using 3D MHD simulations, we estimate the density filling factor of an open magnetic structure by calculating the fraction of the volume occup…
Coronal loops, seen in solar coronal images, are believed to represent emission from magnetic flux tubes with compact cross-sections. We examine the 3D structure of plasma above an active region in a radiative magnetohydrodynamic simulation to locate volume counterparts for coronal loops. In many cases, a loop cannot be linked to an individual thin strand in the volume. While many thin loops are present in the synthetic images, the bright structures in the volume are fewer, and of complex shape. We demonstrate that this complexity can form impressions of thin bright loops, even in the absence …
We study a 2D cellular automaton (CA) model for the evolution of coronal loop plasmas. The model is based on the idea that coronal loops are made of elementary magnetic strands that are tangled and stressed by the displacement of their footpoints by photospheric motions. The magnetic stress accumulated between neighbor strands is released in sudden reconnection events or nanoflares that heat the plasma. We combine the CA model with the Enthalpy Based Thermal Evolution of Loops (EBTEL) model to compute the response of the plasma to the heating events. Using the known response of the XRT telesco…
The heating of the solar chromosphere and corona to the observed high temperatures, imply the presence of ongoing heating that balances the strong radiative and thermal conduction losses expected in the solar atmosphere. It has been theorized for decades that the required heating mechanisms of the chromospheric and coronal parts of the active regions, quiet-Sun, and coronal holes are associated with the solar magnetic fields. However, the exact physical process that transport and dissipate the magnetic energy which ultimately leads to the solar plasma heating are not yet fully understood. The …
The Coronal Multi-channel Polarimeter (CoMP) has opened up exciting opportunities to probe transverse MHD waves in the Sun's corona. The archive of CoMP data is utilised to generate a catalogue of quiescent coronal loops that can be used for studying propagating kink waves. The catalogue contains 120 loops observed between 2012-2014. This catalogue is further used to undertake a statistical study of propagating kink waves in the quiet regions of the solar corona, investigating phase speeds, loop lengths, footpoint power ratio and equilibrium parameter values. The statistical study enables us t…
Modern observatories have revealed the ubiquitous presence of magnetohydrodynamic waves in the solar corona. The propagating waves (in contrast to the standing waves) are usually originated in the lower solar atmosphere which makes them particularly relevant to coronal heating. Furthermore, open coronal structures are believed to be the source regions of solar wind, therefore, the detection of MHD waves in these structures is also pertinent to the acceleration of solar wind. Besides, the advanced capabilities of the current generation telescopes have allowed us to extract important coronal pro…
The history and present state of large-scale magnetohydrodynamic (MHD) modeling of the solar corona and the solar wind with steady or quasi-steady coronal physics is reviewed. We put the evolution of ideas leading to the recognition of the existence of an expanding solar atmosphere into historical context. The development and main features of the first generation of global corona and solar wind models are described in detail. This historical perspective is also applied to the present suite of global corona and solar wind models. We discuss the evolution of new ideas and their implementation in…
In this study we analyze {\sl Atmospheric Imaging Assembly (AIA)} and Hi-C images in order to investigate absolute limits for the finest loop strands. We develop a model of the occurrence-size distribution function of coronal loop widths, characterized by a lower limit of widths $w_{min}$, a peak width $w_p$, a peak occurrence number $n_p$, and a power law slope $a$. Our data analysis includes automated tracing of curvi-linear features with the OCCULT-2 code, automated sampling of the cross-sectional widths of coronal loops, and fitting of the theoretical size distribution to the observed dist…
3D MHD simulations of coronal loops heated via magnetic braiding II. Automatic detection of reconnection outflows and statistical analysis of their properties
We present a new version of the MURaM radiative MHD code that allows for simulations spanning from the upper convection zone into the solar corona. We implemented the relevant coronal physics in terms of optically thin radiative loss, field aligned heat conduction and an equilibrium ionization equation of state. We artificially limit the coronal Alfv{é}n and heat conduction speeds to computationally manageable values using an approximation to semi-relativistic MHD with an artificially reduced speed of light (Boris correction). We present example solutions ranging from quiet to active Sun in or…
Solar coronal loops are commonly subject to oscillations. Observations of coronal oscillations are used to infer physical properties of the coronal plasma using coronal seismology. Excitation and evolution of oscillations in coronal loops is typically studied using highly idealised models of magnetic flux-tubes. In order to improve our understanding of coronal oscillations, it is necessary to consider the effect of realistic magnetic field topology and evolution. We study excitation and evolution of coronal oscillations in three-dimensional self-consistent simulations of solar atmosphere spann…
MHD waves are ubiquitous in the solar corona where the highly structured magnetic fields provide efficient wave guides for their propagation. While MHD waves have been observed originating from lower layers of the solar atmosphere, recent studies have shown that some can be generated in-situ by the collision of dense counter propagating flows. In this theoretical study, we analyse the mechanism that triggers the propagation of kink and sausage modes in the solar corona, following the collision of counter-propagating flows and how the properties of the flows affect the properties of the generat…
We perform MHD modeling of a single bright coronal loop to include the interaction with a non-uniform magnetic field. The field is stressed by random footpoint rotation in the central region and its energy is dissipated into heating by growing currents through anomalous magnetic diffusivity that switches on in the corona above a current density threshold. We model an entire single magnetic flux tube, in the solar atmosphere extending from the high-beta chromosphere to the low-beta corona through the steep transition region. The magnetic field expands from the chromosphere to the corona. The ma…
The physical properties responsible for the formation and evolution of the corona and heliosphere are still not completely understood. 3D MHD global modeling is a powerful tool to investigate all the possible candidate processes. To fully understand the role of each of them, we need a validation process where the output from the simulations is quantitatively compared to the observational data. In this work, we present the results from our validation process applied to the wave turbulence driven 3D MHD corona-wind model WindPredict-AW. At this stage of the model development, we focus the work t…
Magneto-hydrodynamic (MHD) simulations of the emergence of twisted magnetic flux tubes from the solar interior into the corona are discussed to illustrate how twisted and sheared coronal magnetic structures (with free magnetic energy), capable of driving filament eruptions, can form in the corona in emerging active regions. Several basic mechanisms that can disrupt the quasi-equilibrium coronal structures and trigger the release of the stored free magnetic energy are discussed. These include both ideal processes such as the onset of the helical kink instability and the torus instability of a t…
The mechanism behind coronal heating still elude direct observation and modelling of viable theoretical processes and the subsequent effect on coronal structures is one of the key tools available to assess possible heating mechanisms. Wave-heating via phase-mixing of Magnetohydrodynamics (MHD) transverse waves has been proposed as a possible way to convert magnetic energy into thermal energy but increasingly, MHD models suggest this is not a sufficiently efficient mechanism. We model heating by phase-mixing of transverse MHD waves in various configurations, to investigate whether certain circu…
Propagating transverse waves are thought to be a key transporter of Poynting flux throughout the Sun's atmosphere. Recent studies have shown that these transverse motions, interpreted as the magnetohydrodynamic kink mode, are prevalent throughout the corona. The associated energy estimates suggest the waves carry enough energy to meet the demands of the coronal radiative losses in the quiescent Sun. However, it is still unclear how the waves deposit their energy into the coronal plasma. We present the results from a large-scale study of propagating kink waves in the quiescent corona using data…
It is well known that magnetic fields dominate the dynamics in the solar corona, and new generation of numerical modelling of the evolution of coronal magnetic fields, as featured with boundary conditions driven directly by observation data, are being developed. This paper describes a new approach of data-driven magnetohydrodynamic (MHD) simulation of solar active region (AR) magnetic field evolution, which is for the first time that a data-driven full-MHD model utilizes directly the photospheric velocity field from DAVE4VM. We constructed a well-established MHD equilibrium based on a single v…
We present a new MHD wave decomposition method that overcomes the limitations of existing wave identification methods. Our method allows to investigate the energy fluxes in different MHD modes at different locations of the solar atmosphere as waves generated by vortex flows travel through the solar atmosphere and pass near the magnetic null. We simulate wave dynamics through a coronal null configuration and apply a rotational wave driver at our bottom photospheric boundary. To identify the wave energy fluxes associated with different MHD wave modes, we employ a wave-decomposition method that i…
Coronal Shock Waves, EUV waves, and their Relation to CMEs. II. Modeling MHD Shock Wave Propagation Along the Solar Surface, Using Nonlinear Geometrical Acoustics
It is now well established that the Alfvénic waves are ubiquitous in the solar corona. However, the Alfvénic wave energy estimated from the Doppler velocity measurements in the corona was found to be four orders of magnitude less than that estimated from non-thermal line widths. McIntosh & De Pontieu (2012) suggested that this discrepancy in energy might be due to the line-of-sight (LOS) superposition of the several oscillating structures, which can lead to an underestimation of the Alfvénic wave amplitudes and energies. McIntosh & De Pontieu (2012) termed this coronal `dark' or `hidden' energ…
Transverse MHD waves permeate the solar atmosphere and are a candidate for coronal heating. However, the origin of these waves is still unclear. In this work, we analyse coordinated observations from \textit{Hinode}/SOT and \textit{IRIS} of a prominence/coronal rain loop-like structure at the limb of the Sun. Cool and dense downflows and upflows are observed along the structure. A collision between a downward and an upward flow with an estimated energy flux of $10^{7}-10^{8}$~erg~cm$^{-2}$~s$^{-1}$ is observed to generate oscillatory transverse perturbations of the strands with an estimated $\…
