This letter produces a family of rate-compatible protograph-based LDPC codes approaching the independent and uniformly distributed (i.u.d.) capacity of inter-symbol interference (ISI) channels. This problem is highly nontrivial due to the joint design of structured (protograph-based) LDPC codes and the state structure of ISI channels. We describe a method to design nested high-rate protograph codes by adding variable nodes to the protograph of a lower rate code. We then design a family of rate-compatible protograph codes using the extension method. The resulting protograph codes have iterative decoding thresholds close to the i.u.d. capacity. Our results are supported by numerical simulations.
Density evolution for protograph Low-Density Parity-Check (LDPC) codes is considered, and it is shown that the message-error rate falls double-exponentially with iterations whenever the degree-2 subgraph of the protograph is cycle-free and noise level is below threshold. Conditions for stability of protograph density evolution are established and related to the structure of the protograph. Using large-girth graphs, sequences of protograph LDPC codes with block-error threshold equal to bit-error threshold and block-error rate falling near-exponentially with blocklength are constructed determini…
Protograph low-density-parity-check (LDPC) are considered to design near-capacity low-rate codes over the binary erasure channel (BEC) and binary additive white Gaussian noise (BIAWGN) channel. For protographs with degree-one variable nodes and doubly-generalized LDPC (DGLDPC) codes, conditions are derived to ensure equality of bit-error threshold and block-error threshold. Using this condition, low-rate codes with block-error threshold close to capacity are designed and shown to have better error rate performance than other existing codes.
This work investigates protograph-based LDPC codes for the AWGN channel with OOK modulation. A non-uniform distribution of the OOK modulation symbols is considered to improve the power efficiency especially for low SNRs. To this end, a specific transmitter architecture based on time sharing is proposed that allows probabilistic shaping of (some) OOK modulation symbols. Tailored protograph-based LDPC code designs outperform standard schemes with uniform signaling and off-the-shelf codes by 1.1 dB for a transmission rate of 0.25 bits/channel use.
Protograph-based, off-the-shelf low-density parity-check (LDPC) codes are optimized for higher-order modulation and quantized sum-product decoders. As an example, for the recently proposed LDPC code from the upcoming IEEE 802.3ca standard for passive optical networks (PONs), an optimized mapping of the bit channels originating from bit-metric decoding to the protograph variable nodes gains 0.4 dB and 0.3 dB at a bit-error rate of 1e-6 for shaped and uniform signaling, respectively. Furthermore, the clipping value for a quantized sum-product LDPC decoder is optimized via discretized density evo…
Controlling small size trapping sets and short cycles can result in LDPC codes with large minimum distance $d_{\min}$. We prove that short cycles with a chord are the root of several trapping sets and eliminating these cycles increases $d_{\min}$. We show that the lower bounds on $d_{\min}$ of an LDPC code with chordless short cycles, girths 6 (and 8), and column weights $γ$ (and 3), respectively, are $2γ$ (and 10), which is a significant improvement compared to the existing bounds $γ+1$ (and 6). Necessary and sufficient conditions for exponent matrices of protograph-based LDPC codes with chor…
In this paper, we study the cycle distribution of random low-density parity-check (LDPC) codes, randomly constructed protograph-based LDPC codes, and random quasi-cyclic (QC) LDPC codes. We prove that for a random bipartite graph, with a given (irregular) degree distribution, the distributions of cycles of different length tend to independent Poisson distributions, as the size of the graph tends to infinity. We derive asymptotic upper and lower bounds on the expected values of the Poisson distributions that are independent of the size of the graph, and only depend on the degree distribution an…
Protograph-based Raptor-like low-density parity-check codes (PBRL codes) are a recently proposed family of easily encodable and decodable rate-compatible LDPC (RC-LDPC) codes. These codes have an excellent iterative decoding threshold and performance across all design rates. PBRL codes designed thus far, for both long and short block-lengths, have been based on optimizing the iterative decoding threshold of the protograph of the RC code family at various design rates. In this work, we propose a design method to obtain better quasi-cyclic (QC) RC-LDPC codes with PBRL structure for short block-l…
We consider the problem of constructing $(3,L)$ quasi-cyclic low-density parity-check (LDPC) codes from complete protographs. A complete protograph is a small bipartite graph with two disjoint vertex sets such that every vertex in the variable-node set is connected to every vertex in the check-node set by a unique edge. This paper analyzes the required lifting factor for achieving girths of six or eight in the resulting quasi-cyclic codes with constraints on lifting. The required lifting factors provide lower bounds on the block-length of such codes.
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels are constructed and used for code design. The constructed codes perform as good as multi-edge type codes of Zhang and Kschischang (2013). For 64-ASK with probabilistic shaping, a blocklength 64800 code…
Block-fading (BF) channel, also known as slow-fading channel, is a type of simple and practical channel model that can characterize the primary feature of a number of wireless-communication applications with low to moderate mobility. Although the BF channel has received significant research attention in the past twenty years, designing low-complexity outage-limit-approaching error-correction codes (ECCs) is still a challenging issue. For this reason, a novel family of protograph low-density parity-check (LDPC) codes, called root-protograph (RP) LDPC codes, has been conceived recently. The RP c…
A ternary message passing (TMP) decoding algorithm for low-density parity-check codes is developed. All messages exchanged between variable and check nodes have a ternary alphabet, and the variable nodes exploit soft information from the channel. A density evolution analysis is developed for unstructured and protograph-based ensembles. For unstructured ensembles the stability condition is derived. Optimized ensembles for TMP decoding show asymptotic gains of up to 0.6 dB with respect to ensembles optimized for binary message passing decoding. Finite length simulations of codes from TMP-optimiz…
In this work, the design of robust, protograph-based low-density parity-check (LDPC) codes for rate-adaptive communication via probabilistic shaping is considered. Recently, probabilistic amplitude shaping (PAS) by Böcherer et al. has been introduced for capacity approaching and rate-adaptive communication with a bitwise-demapper and binary decoder. Previous work by the authors considered the optimization of protograph based LDPC codes for PAS and specific spectral efficiencies (SEs) to jointly optimize the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded m…
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels for the code design are used. The constructed codes for uniform inputs perform as good as the multi-edge type codes of Zhang and Kschischang (2013). For 8-ASK and 64-ASK with probabilistic shaping, cod…
In this paper, we propose a new method to design low-density parity-check Hadamard (LDPC-Hadamard) codes, a type of ultimate-Shannon-limit approaching channel codes. The technique is based on applying Hadamard constraints to the check nodes in a generalized protograph-based LDPC code, followed by lifting the generalized protograph. We name the codes formed protograph-based LDPC Hadamard (PLDPC-Hadamard) codes. We also propose a modified Protograph Extrinsic Information Transfer (PEXIT) algorithm for analyzing and optimizing PLDPC-Hadamard code designs. The proposed algorithm further allows the…
A generalized low-density parity-check (GLDPC) code is a class of codes, where single parity check nodes in a conventional low-density parity-check (LDPC) code are replaced by linear codes with higher parity check constraints. In this paper, we introduce a new method of constructing GLDPC codes by inserting the generalized check nodes for partial doping. While the conventional protograph GLDPC code dopes the protograph check nodes by replacing them with the generalized check nodes, a new GLDPC code is constructed by adding the generalized check nodes and partially doping the selected variable …
This paper investigates the bit-interleaved coded generalized spatial modulation (BICGSM) with iterative decoding (BICGSM-ID) for multiple-input multiple-output (MIMO) visible light communications (VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain (SiD) symbols and the spatial-domain (SpD) light emitting diode (LED)-index patterns are coded by a protograph low-density parity-check (P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating (SSER) method for constructing a type of novel generalized spatial modulation (GSM) constella…
Error correction plays a major role in the reconciliation of continuous variable quantum key distribution (CV-QKD) and greatly affects the performance of the system. CV-QKD requires error correction codes of extremely low rates and high reconciliation efficiencies. There are only very few code designs available in this ultra low rate regime. In this paper, we introduce a method for designing protograph-based ultra low rate LDPC codes using differential evolution. By proposing type-based protographs, a new way of representing low rate protograph-based LDPC codes, we drastically reduce the compl…
This paper considers the problem of source coding with side information at the decoder, also called Slepian-Wolf source coding scheme. In practical applications of this coding scheme, the statistical relation between the source and the side information can vary from one data transmission to another, and there is a need to adapt the coding rate depending on the current statistical relation. In this paper, we propose a novel rate-adaptive code construction based on LDPC codes for the Slepian-Wolf source coding scheme. The proposed code design method allows to optimize the code degree distributio…
To achieve reliable and efficient transmissions in free-space optical (FSO) communication, this paper designs a new protograph low-density parity-check (PLDPC) coded generalized spatial multipulse position modulation (GSMPPM) system over weak turbulence channels. Specifically, we investigate the PLDPC code, generalized space shift keying (GSSK) modulation, and MPPM constellation. First, we propose a type of novel GSMPPM constellations that intelligently integrates the GSSK into MPPM, referred to as asymmetric dual-mode (ADM) constellations, so as to improve the performance of the PLDPC-coded G…
A new protograph-based framework for message passing (MP) decoding of low density parity-check (LDPC) codes with Hamming weight amplifiers (HWAs), which are used e.g. in the NIST post-quantum crypto candidate LEDAcrypt, is proposed. The scheme exploits the correlations in the error patterns introduced by the HWA using a turbo-like decoding approach where messages between the decoders for the outer code given by the HWA and the inner LDPC code are exchanged. Decoding thresholds for the proposed scheme are computed using density evolution (DE) analysis for belief propagation (BP) and ternary mes…
This work addresses the physical layer channel code design for an uncoordinated, frame- and slot-asynchronous random access protocol. Starting from the observation that collisions between two users yield very specific interference patterns, we define a surrogate channel model and propose different protograph low-density parity-check code designs. The proposed codes are both tested in a setup where the physical layer is abstracted, as well as on a more realistic channel model, where finite-length physical layer simulations of the entire asynchronous random access scheme, including decoding are …
The protograph low-density parity-check (LDPC) codes possess many attractive properties, such as the low encoding/decoding complexity and better error floor performance, and hence have been successfully applied to different types of communication and data storage channels. In this paper,we design protograph LDPC codes for communication systems corrupted by the impulsive noise, which are modeled as additive white symmetric alpha-stable noise (AWSaSN) channels. We start by presenting a novel simulation-based protograph extrinsic information transfer (P-EXIT) analysis to derive the iterative deco…
LDPC codes based on multiple-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. In this paper, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct two important categories of LDPC codes; quasi-cyclic (QC) LDPC and spatially-coupled …
This paper gives necessary and sufficient conditions for the Tanner graph of a quasi-cyclic (QC) low-density parity-check (LDPC) code based on the all-one protograph to have girth 6, 8, 10, and 12, respectively, in the case of parity-check matrices with column weight 4. These results are a natural extension of the girth results of the already-studied cases of column weight 2 and 3, and it is based on the connection between the girth of a Tanner graph given by a parity-check matrix and the properties of powers of the product between the matrix and its transpose. The girth conditions can be easi…
The recent development of deep learning methods provides a new approach to optimize the belief propagation (BP) decoding of linear codes. However, the limitation of existing works is that the scale of neural networks increases rapidly with the codelength, thus they can only support short to moderate codelengths. From the point view of practicality, we propose a high-performance neural min-sum (MS) decoding method that makes full use of the lifting structure of protograph low-density parity-check (LDPC) codes. By this means, the size of the parameter array of each layer in the neural decoder on…
This paper revisits the connection between the girth of a protograph-based LDPC code given by a parity-check matrix and the properties of powers of the product between the matrix and its transpose in order to obtain the necessary and sufficient conditions for a code to have given girth between 6 and 12, and to show how these conditions can be incorporated into simple algorithms to construct codes of that girth. To this end, we highlight the role that certain submatrices that appear in these products have in the construction of codes of desired girth. In particular, we show that imposing girth …
As a typical example of bandwidth-efficient techniques, bit-interleaved coded modulation with iterative decoding (BICM-ID) provides desirable spectral efficiencies in various wireless communication scenarios. In this paper, we carry out a comprehensive investigation on tail-biting (TB) spatially coupled protograph (SCP) low-density parity-check (LDPC) codes in BICM-ID systems. Specifically, we first develop a two-step design method to formulate a novel type of constellation mappers, referred to as labeling-bit-partial-match (LBPM) constellation mappers, for SC-P-based BICM-ID systems. The LBPM…
A class of rate-adaptive protograph MacKay-Neal (MN) codes is introduced and analyzed. The code construction employs an outer distribution matcher (DM) to adapt the rate of the scheme. The DM is coupled with an inner protograph-based low-density parity-check (LDPC) code, whose base matrix is optimized via density evolution analysis to approach the Shannon limit of the binary-input additive white Gaussian noise (biAWGN) channel over a given range of code rates. The density evolution analysis is complemented by finite-length simulations, and by a study of the error floor performance.
This paper presents a unifying framework to construct low-density parity-check (LDPC) codes with associated Tanner graphs of desired girth. Towards this goal, we highlight the role that a certain square matrix that appears in the product of the parity-check matrix with its transpose has in the construction of codes with graphs of desired girth and further explore it in order to generate the set of necessary and sufficient conditions for a Tanner graph to have a given girth between 6 and 12. For each such girth, we present algorithms to construct codes of the desired girth and we show how to us…
The huge amount of data produced in the fifth-generation (5G) networks not only brings new challenges to the reliability and efficiency of mobile devices but also drives rapid development of new storage techniques. With the benefits of fast access speed and high reliability, NAND flash memory has become a promising storage solution for the 5G networks. In this paper, we investigate a protograph-coded bit-interleaved coded modulation with iterative detection and decoding (BICM-ID) utilizing irregular mapping (IM) in the multi-level-cell (MLC) NAND flash-memory systems. First, we propose an enha…
The demand for flexible broadband wireless services makes the pruning technique, including both shortening and puncturing, an indispensable component of error correcting codes. The analysis of the pruning process for structured lowdensity parity-check (LDPC) codes can be considerably simplified with their equivalent representations through base-matrices or protographs. In this letter, we evaluate the thresholds of the pruned base-matrices by using protograph based on extrinsic information transfer (PEXIT). We also provide an efficient method to optimize the pruning patterns, which can signific…
