We report on the experimental demonstration of single photon state generation and characterization in an electron microscope. In this aim we have used low intensity relativistic (energy between 60kV and 100 keV) electrons beams focused in a ca 1 nm probe to excite diamond nanoparticles. This triggered individual neutral Nitrogen-vacancies (NV0) centers to emit photon which could be gathered and sent to a Hanbury Brown Twiss intensity interferometer. The detection of a dip in the correlation function at small time delays clearly demonstrates antibunching and thus the creation of non-classical light states. Specifically, we have also demonstrated single photon state detection. We unveil the mechanism behind quantum states generation in an electron microscope, and show that it clearly makes cathodoluminescence the nanometer scale analog of photoluminescence rather than electroluminescence. By using an extremely small electron probe size and the ability to monitor its position with sub nanometer resolution, we also show the possibility of measuring the quantum character of the emitted beam with deep sub wavelength resolution.
Most methods for optical visualization beyond the diffraction limit rely on fluorescence emission by molecular tags. Here, we report a method for visualization of nanostructures down to a few nanometers using a conventional bright-field microscope without requiring additional molecular tags such as fluorophores. The technique, Bright-field Nanoscopy, is based on the strong thickness dependent color of ultra-thin germanium on an optically thick gold film. We demonstrate the visualization of grain boundaries in chemical vapour deposited single layer graphene and the detection of single 40 nm Ag …
We have developed a simple and reliable technique for two-terminal transport measurements of free-standing wire-like objects. The method is based on the low-energy electron point source microscope. The field emission tip of the microscope is used as a movable electrode to make a well-defined local electrical contact on a controlled place of a nanometer-size object. This allows transport measurements of the object to be conducted. The technique was applied to carbon nanotube ropes.
We report low-temperature transport spectroscopy of a graphene quantum dot fabricated by atomic force microscope nanolithography. The excellent spatial resolution of the atomic force microscope allows us to reliably fabricate quantum dots with short constrictions of less than 15 nm in length. Transport measurements demonstrate that the device is dominated by a single quantum dot over a wide gate range. The electron spin system of the quantum dot is investigated by applying an in-plane magnetic field. The results are consistent with a Lande g-factor of 2 but no regular spin filling sequence is …
Quantitatively reliable atomic pair distribution functions (PDFs) have been obtained from nanomaterials in a straightforward way from a standard laboratory transmission electron microscope (TEM). The approach looks very promising for making electron-derived PDFs (ePDFs) a routine step in the characterization of nanomaterials because of the ubiquity of such TEMs in chemistry and materials laboratories. No special attachments such as energy filters were required on the microscope. The methodology for obtaining the ePDFs is described as well as some opportunities and limitations of the method.
We summarize our new scanning magnetic 3-D imaging system. This scanning system uses optically detected magnetic resonance in a single nitrogen vacancy center in a diamond nanocrystal. The theoretical analysis and the first experimental demonstrations have proved that this method has single spin sensitivity and a sub-nanoscale spatial resolution at room temperature.
We conducted local anodic oxidation (LAO) lithography in single-layer, bilayer, and multilayer graphene using tapping-mode atomic force microscope. The width of insulating oxidized area depends systematically on the number of graphene layers. An 800-nm-wide bar-shaped device fabricated in single-layer graphene exhibits the half-integer quantum Hall effect. We also fabricated a 55-nm-wide graphene nanoribbon (GNR). The conductance of the GNR at the charge neutrality point was suppressed at low temperature, which suggests the opening of an energy gap due to lateral confinement of charge carriers…
The quantitative characterization of the degree of randomness and aggregation of surface micro and nanostructures is critical to evaluate their effects on targeted functionalities. To this end, the methods of Point Pattern Analysis (PPA), largely used in ecology and medical imaging, seem to provide a powerful toolset. However, the application of these techniques requires the extraction of the point pattern of nanostructures from their microscope images. In this work, we address the issue of the impact that Scanning Electron Microscope (SEM) image processing may have on the fundamental metric o…
Mechanical resonators based on low-dimensional materials provide a unique platform for exploring a broad range of physical phenomena. The mechanical vibrational states are indeed extremely sensitive to charges, spins, photons, and adsorbed masses. However, the roadblock is often the readout of the resonator, since the detection of the vibrational states becomes increasingly difficult for smaller resonators. Here, we report an unprecedentedly sensitive method to detect nanotube resonators with effective masses in the 10^-20 kg range. We use the beam of an electron microscope to resolve the mech…
Quantum sensors based on solid-state spins provide tremendous opportunities in a wide range of fields from basic physics and chemistry to biomedical imaging. However, integrating them into a scanning probe microscope to enable practical, nanoscale quantum imaging is a highly challenging task. Recently, the use of single spins in diamond in conjunction with atomic force microscopy techniques has allowed significant progress towards this goal, but generalisation of this approach has so far been impeded by long acquisition times or by the absence of simultaneous topographic information. Here we r…
We describe a scanning device where a single spin is used as an ultrasensitive, nanoscale magnetic field sensor. As this "probe spin" we consider a single nitrogen-vacancy defect center in a diamond nanocrystal, attached to the tip of the scanning device. Changes in the local field seen by the probe spin are detected by optically monitoring its electron paramagnetic resonance transition. The room-temperature scanning device may be useful for performing nanoscale magnetic resonance imaging and spectroscopy, and for the characterization of magnetic nanostructures down to the single atom level.
We present a combined scanning force and tunneling microscope working in a dilution refrigerator that is optimized for the study of individual electronic nano-devices. This apparatus is equipped with commercial piezo-electric positioners enabling the displacement of a sample below the probe over several hundred microns at very low temperature, without excessive heating. Atomic force microscopy based on a tuning fork resonator probe is used for cryogenic precise alignment of the tip with an individual device. We demonstrate the local tunneling spectroscopy of a hybrid Josephson junction as a fu…
The electron microscope has been a powerful, highly versatile workhorse in the fields of material and surface science, micro and nanotechnology, biology and geology, for nearly 80 years. The advent of two-dimensional materials opens new possibilities for realising an analogy to electron microscopy in the solid state. Here we provide a perspective view on how a two-dimensional (2D) Dirac fermion-based microscope can be realistically implemented and operated, using graphene as a vacuum chamber for ballistic electrons. We use semiclassical simulations to propose concrete architectures and design …
Optically active quantum dots, for instance self-assembled InGaAs quantum dots, are potentially excellent single photon sources. The fidelity of the single photons is much improved using resonant rather than non-resonant excitation. With resonant excitation, the challenge is to distinguish between resonance fluorescence and scattered laser light. We have met this challenge by creating a polarization-based dark-field microscope to measure the resonance fluorescence from a single quantum dot at low temperature. We achieve a suppression of the scattered laser exceeding a factor of 10^7 and backgr…
We report electronic measurements on high-quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely-suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths…
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an optical microscope system consisting of a coherent bundle of 37,000 optical fibers for real-time imaging of the experiment at a resolution of $\sim$1 $μ$m. We present cryogenic optical and optomechanical …
We have combined direct nanofabrication by local anodic oxidation with conventional electron-beam lithography to produce a parallel double quantum dot based on a GaAs/AlGaAs heterostructure. The combination of both nanolithography methods allows to fabricate robust in-plane gates and Cr/Au top gate electrodes on the same device for optimal controllability. This is illustrated by the tunability of the interdot coupling in our device. We describe our fabrication and alignment scheme in detail and demonstrate the tunability in low-temperature transport measurements.
We present the design and operation of a fiber-based cryogenic confocal microscope. It is designed as a compact cold-finger that fits inside the bore of a superconducting magnet, and which is a modular unit that can be easily swapped between use in a dilution refrigerator and other cryostats. We aimed at application in quantum optical experiments with electron spins in semiconductors and the design has been optimized for driving with, and detection of optical fields with well-defined polarizations. This was implemented with optical access via a polarization maintaining fiber together with Voig…
Optical contrast is the most common preliminary method to identify layer number of two-dimensional (2D) materials, but is seldom used as a confirmatory technique. We explain the reason for variation of optical contrast between imaging systems. We introduce a universal method to quantify the layer number using the RGB (red-green-blue) and RAW optical images. For RGB images, the slope of 2D flake (MoS2, WSe2, graphene) intensity vs. substrate intensity is extracted from optical images with varying lamp power. The intensity slope identifies layer number and is system independent. For RAW images, …
We define superconducting constrictions by ploughing a deposited Aluminum film with a scanning probe microscope. The microscope tip is modified by electron beam deposition to form a nano-plough of diamond-like hardness, what allows the definition of highly transparent Josephson junctions. Additionally a dc-SQUID is fabricated to verify appropriate functioning of the junctions. The devices are easily integrated in mesoscopic devices as local radiation sources and can be used as tunable on-chip millimeter wave sources.
We describe a two-color pump-probe scanning magneto-optical Kerr effect (MOKE) microscope which we have developed to investigate electron spin phenomena in semiconductors at cryogenic temperatures with picosecond time and micrometer spatial resolution. The key innovation of our microscope is the usage of an ultrafast `white light' supercontinuum fiber-laser source which provides access to the whole visible and near-infrared spectral range. Our Kerr microscope allows for the independent selection of the excitation and detection energy while avoiding the necessity to synchronize the pulse trains…
Despite decades of research, the ultimate goal of nanotechnology--top-down manipulation of individual atoms--has been directly achieved with only one technique: scanning probe microscopy. In this Review, we demonstrate that scanning transmission electron microscopy (STEM) is emerging as an alternative method for the direct assembly of nanostructures, with possible applications in plasmonics, quantum technologies, and materials science. Atomically precise manipulation with STEM relies on recent advances in instrumentation that have enabled non-destructive atomic-resolution imaging at lower elec…
The separation dependence of the interaction between two resonant groups of CdSe/ZnS nanocrystallite quantum dots is studied at room temperature. A near-field scanning optical microscope is used to bring a group of mono-disperse ~6.5 nm diameter nanocrystallite quantum dots which are attached to the microscope probe, into close proximity of `~8.5 nm diameter group of nanocrystallite quantum dots which are deposited on a solid immersion lens. Information extracted from photoluminescence, photoluminescence excitation and absorption curves as well as numerical calculations of the energy levels, s…
Nitrogen-vacancy (NV) center in diamond is a promising quantum sensor with remarkably versatile sensing capabilities. While scanning NV magnetometry is well-established, NV electrometry has been so far limited to bulk diamonds. Here we demonstrate imaging external alternating (AC) and direct (DC) electric fields with a single NV at the apex of a diamond scanning tip under ambient conditions. A strong electric field screening effect is observed at low frequencies due to charge noise on the surface. We quantitatively measure its frequency dependence, and overcome this screening by mechanically o…
The molecular dark state participates in many important photon-induced processes, yet is typically beyond the optical-spectroscopic measurement due to the forbidden transition dictated by the selection rule. In this work, we propose to use the scanning tunneling microscope (STM) as an incisive tool to directly profile the dark-state transition density of a single molecule, taking advantage of the localized static electronic field near the metal tip. The detection of dark state is achieved by measuring the fluorescence from a higher bright state to the ground state with assistant optical pumpin…
Methods and techniques to measure and image beyond the state-of-the-art have always been influential in propelling basic science and technology. Because current technologies are venturing into nanoscopic and molecular-scale fabrication, atomic-scale measurement techniques are inevitable. One such emerging sensing method uses the spins associated with nitrogen-vacancy (NV) defects in diamond. The uniqueness of this NV sensor is its atomic size and ability to perform precision sensing under ambient conditions conveniently using light and microwaves (MW). These advantages have unique applications…
