We compute the shot noise in ballistic and disordered Fe/MgO/Fe tunnel junctions by a wave function-matching method. For tunnel barriers with no more than 5 atomic layers we find a suppression of the Fano factor as a function of the magnetic configuration. For thicker MgO barriers the shot noise is suppressed up to a threshold bias indicating the onset of resonant tunneling. We find excellent agreement with recent experiments when interface disorder is taken into account
Tunneling spectroscopy is applied to tunnel junctions with only one or no ferromagnetic electrode to study the excitation of quasi particles in magnetic tunnel junctions. The bias dependence is investigated with high accuracy by inelastic electron tunneling spectroscopy. Both types of junctions show a zero bias anomaly that is different in size and sign compared to magnetic tunnel junctions, i.e. junctions with two ferromagnetic electrodes. A pronounced difference is also found depending on the material that is probed by the tunneling electrons, which might be attributed to the excitation of m…
Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barrie…
InGaN/GaN tunnel junction contacts were grown on top of an InGaN/GaN blue (450 nm) light emitting diode wafer using plasma assisted molecular beam epitaxy. The tunnel junction contacts enable low spreading resistance n-GaN top contact layer thereby requiring less top metal contact coverage on the surface. A voltage drop of 5.3 V at 100 mA, forward resistance of 2 x 10-2 ohm cm2 and a higher light output power are measured in tunnel junction LED. A low resistance of 5 x 10-4 ohm cm2 was measured in a MBE grown tunnel junction on GaN PN junction device, indicating that the tunnel junction LED de…
Enhanced interband tunnel injection of holes into a PN junction is demonstrated using P-GaN/InGaN/N-GaN tunnel junctions with a specific resistivity of 1.2 X 10-4 Ω cm2. The design methodology and low-temperature characteristic of these tunnel junctions is discussed, and insertion into a PN junction device is described. Applications of tunnel junctions in III-nitride optoelectronics devices are explained using energy band diagrams. The lower band gap and polarization fields reduce tunneling barrier, eliminating the need for ohmic contacts to p-type GaN. This demonstration of efficient tunnel i…
Crystallographic and spin polarized transport properties of (100) textured and (100) epitaxial Fe/MgO/Fe magnetic tunnel junctions are compared. Strong similarities in the transport properties show that structural coherence and magnetic quality at the 25 nm grain scale in textured junctions are sufficient to issue signatures of the spin polarized transport specific to a single crystal junction. This demonstrates that the lateral coherence of the Bloch tunneling wave function is identically limited in both systems. Our analysis leads to model the textured tunnel junction as a juxtaposition of n…
In quasi-magnetic tunnel junctions (QMTJs) with a EuS spin filter tunnel barrier between Al and Co electrodes, we observed large magnetoresistance (MR). The bias dependence shows an abrupt increase of MR ratio in high bias voltage, which is contrary to conventional magnetic tunnel junctions (MTJs). This behavior can be understood as due to Fowler-Nordheim tunneling through the fully spin-polarized EuS conduction band. The I-V characteristics and bias dependence of MR calculated using tunneling theory shows excellent agreement with experiment.
We show that GdN nanoislands can enhance inter-band tunneling in GaN PN junctions by several orders of magnitude, enabling low optical absorption low-resistance tunnel junctions (specific resistivity 1.3 X 10-3 Ω-cm2) for various optoelectronic applications. We exploit the ability to overgrow high quality GaN over GdN nanoislands to create new nanoscale heterostructure designs that are not feasible in planar epitaxy. GdN nanoisland assisted inter-band tunneling was found to enhance tunneling in both of the polar orientations of GaN. Tunnel injection of holes was confirmed by low temperature op…
MgO based magnetic tunnel junctions are prepared to investigate the dielectric breakdown of the tunnel barrier. The breakdown is directly visualized by transmission electron microscopy measurements. The broken tunnel junctions are prepared for the microscopy measurements by focussed ion beam out of the junctions characterized by transport investigations. Consequently, a direct comparison of transport behavior and structure of the intact and broken junctions is obtained. Compared to earlier findings in Alumina based junctions, the MgO barrier shows much more microscopic pinholes after breakdown…
We investigated electroforming-free bipolar resistive switching behavior in Pt/Ti/Al2O3/Al tunnel junctions where the Al2O3 tunnel barrier was naturally formed on Al in air. Various compliance current values for the junction's set switching successfully lead to various resistance values in its low resistance state, suggesting the possibility for multi-level-operation. A mechanism for the bipolar switching is qualitatively discussed in terms of the modulation of the tunnel barrier by the reactive Ti layer on top of the barrier.
We study the thermal transport in magnetic tunnel junctions. Thermal gradients across the tunneling barrier appear around the Fowler-Nordheim tunneling regime, due to the current-induced heat caused by quantum interference. Both thermovoltage and thermal temperature follow a linear response with the applied current, which is an evidence for a thermoelectric effect. By increasing the barrier transparency, the dynamics of thermoelectric properties is observed with the current. Accordingly, a large range of the Seebeck coefficient, 10 - 1000 μV/K, has been obtained in magnetic tunnel junctions.
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction higher than 50%) materials towards highly efficient UV LEDs. We demonstrate that polarization-induced 3D charge is beneficial in reducing tunneling barriers especially for high composition AlGaN tunnel junctions. The design of graded tunnel junction structure…
A standard route for fabrication of nanoscopic tunnel junctions is via electromigration of lithographically prepared gold nanowires. In the lithography process, a thin adhesion layer, typically titanium, is used to promote the adhesion of the gold nanowires to the substrate. Here, we demonstrate that such an adhesion layer plays a vital role in the electrical transport behavior of electromigrated tunnel junctions. We show that junctions fabricated from gold deposited on top of a titanium adhesion layer are electrically stable at ambient conditions, in contrast to gold junctions without a titan…
We demonstrate efficient spin-polarized tunneling between a ferromagnetic metal and a ferromagnetic semiconductor with highly mismatched conductivities. This is indicated by a large tunneling magnetoresistance (up to 30%) at low temperatures in epitaxial magnetic tunnel junctions composed of a ferromagnetic metal (MnAs) and a ferromagnetic semiconductor (GaMnAs) separated by a nonmagnetic semiconductor (AlAs). Analysis of the current-voltage characteristics yields detailed information about the asymmetric tunnel barrier. The low temperature conductance-voltage characteristics show a zero bias …
Perpendicular magnetic tunnel junction with MgAl2O4 barrier is investigated. It is found that reactive RF sputtering with O2 is essential to obtain strong perpendicular magnetic anisotropy and large tunneling magnetoresistance in MgAl2O4-based junctions. An interfacial perpendicular magnetic anisotropy energy density of 2.25 mJ/m2 is obtained for the samples annealed at 400C. An enhanced magnetoresistance of 60% has also been achieved. The Vhalf, bias voltage at which tunneling magnetoresistance drops to half of the zero-bias value, is found to be about 1V, which is substantially higher than t…
Molecular bridges covalently bonded to two ferromagnetic electrodes can transform ferromagnetic materials and produce intriguing spin transport characteristics. This paper discusses the impact of molecule induced strong coupling on spin transport. To study the molecular coupling effect organometallic molecular complex (OMC) was bridged between two ferromagnetic electrodes of a magnetic tunnel junction (Ta/Co/NiFe/AlOx/NiFe/Ta) along the exposed side edges. OMCs induced strong iter-ferromagnetic electrode coupling to yield drastic changes in transport properties of the magnetic tunnel junction …
The objective of this work is to describe the tunnel electron current in single barrier magnetic tunnel junctions within a new approach that goes beyond the single-band transport model. We propose a ballistic multi-channel electron transport model that can explain the influence of in-plane lattice strain on the tunnel magnetoresistance as well as the asymmetric voltage behavior. We consider as an example single crystal magnetic Fe(110) electrodes for Fe/Insulator/Fe and Fe/Insulator/La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ tunnel junctions, where the electronic band structures of Fe and La$_{0.67}$Sr$_…
Commercially successful magnetic tunnel junction can harness the unmatched capabilities of molecular device elements by solving decade-old fabrication issues. Utilization of magnetic tunnel junction as a testbed for molecules also enables unprecedented magnetic studies of molecular spintronics devices. This paper utilizes magnetic force microscopy (MFM) to vividly show that organometallic molecules when bridged between two ferromagnetic electrodes along the magnetic tunnel junction edges, transformed the magnetic electrodes itself. Molecules impacted several hundred-micron areas of ferromagnet…
We present results of a study of tunnel junction aging in which the early time dynamics are captured by in situ monitoring of electrical properties of Al-AlOx-Al planar tunnel junctions beginning when the deposition of the counterelectrode is complete. The observed stretched exponential dependences of the conductance and the capacitance manifest hierarchically constrained dynamics imposed by correlated relaxations of interface traps. Bias voltage is used as a control parameter to create bias-dependent aging trajectories that exhibit memory and age-dependent relaxations. Simple tunnel barrier a…
Magnetic tunnel junctions with the layer sequence Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al/MgO/CoFe were fabricated by magnetron sputtering at room temperature (RT). The samples exhibit a large inverse tunneling magnetoresistance (TMR) effect of up to -66% at RT. The largest value of -84% at 20 K reflects a rather weak influence of temperature. The dependence on the voltage drop shows an unusual behavior with two almost symmetric peaks at $\pm600$ mV with large inverse TMR ratios and small positive values around zero bias.
Magnetite (Fe3O4) based tunnel junctions with turret/mesa structure have been investigated for different barrier materials (SrTiO3, NdGaO3, MgO, SiO2, and Al2O(3-x)). Junctions with a Ni counter electrode and an aluminium oxide barrier showed reproducibly a tunneling magnetoresistance (TMR) effect at room temperature of up to 5% with almost ideal switching behavior. This number only partially reflects the intrinsic high spin polarization of Fe3O4. It is considerably decreased due to an additional series resistance within the junction. Only SiO2 and Al2O(3-x) barriers provide magnetically decou…
Future generations of magnetic random access memory demand magnetic tunnel junctions that can provide simultaneously high magnetoresistance, strong retention, low switching energy and small cell size below 10nm. Here we study perpendicular magnetic tunnel junctions with composite free layers where multiple ferromagnet/nonmagnet interfaces can contribute to the thermal stability. Different nonmagnetic materials (MgO, Ta, Mo) have been employed as the coupling layers in these multi-interface free layers. The evolution of junction properties under different annealing conditions is investigated. A…
We report a large, quasi-reversible tunnel magnetoresistance in exchange-biased ferromagnetic semiconductor tunnel junctions wherein a soft ferromagnetic semiconductor (\gma) is exchange coupled to a hard ferromagnetic metal (MnAs). Our observations are consistent with the formation of a region of inhomogeneous magnetization (an "exchange spring") within the biased \gma layer. The distinctive tunneling anisotropic magnetoresistance of \gma produces a pronounced sensitivity of the magnetoresistance to the state of the exchange spring.
A new mechanism different from the spin accumulation picture is proposed for the current induced magnetization switching in magnetic tunnel junctions by taking into account the effect of the electron electron interaction. We found in tunnel structures the possibility of an enhanced spin switching effect that, when normalized with respect to the current, is much bigger than that in multilayers. Some recent experimental results show evidence for the present picture.
Polarization engineered interband tunnel junctions (TJs) are integrated in nanowire ultraviolet (UV) light emitting diodes (LEDs). A ~6V reduction in turn-on voltage is achieved by the integration of tunnel junction at the base of polarization doped nanowire UV LEDs. Moreover, efficient hole injection into the nanowire LEDs leads to suppressed efficiency droop in TJ integrated nanowire LEDs. The combination of both reduced bias voltage and increased hole injection increases the wall plug efficiency in these devices. More than 100 microwatts of UV emission at ~310 nm is measured with external q…
In double spin filter (SF) tunnel junctions, the spin information is generated and analyzed purely from the SF effect with nonmagnetic electrodes. In this article we numerically evaluate the bias dependence of magnetoresistance in such tunnel junctions (nonmagnetic metal / SF / nonmagnetic insulator / SF / nonmagnetic metal), particularly in cases when different SF materials are utilized. A large magnetoresistance with nonmonotonic and asymmetric bias dependence is expected within the frame of WKB approximation. We illustrate the systematic influence of tunnel barrier height, tunnel barrier th…
We have studied the magnetoresistance (TMR) of tunnel junctions with electrodes of La2/3Sr1/3MnO3 and we show how the variation of the conductance and TMR with the bias voltage can be exploited to obtain a precise information on the spin and energy dependence of the density of states. Our analysis leads to a quantitative description of the band structure of La2/3Sr1/3MnO3 and allows the determination of the gap delta between the Fermi level and the bottom of the t2g minority spin band, in good agreement with data from spin-polarized inverse photoemission experiments. This shows the potential o…
A magnetic tunnel junctions composed of room temperature ferromagnetic semiconductor rutile Ti1-xCoxO2-d and ferromagnetic metal Fe0.1Co0.9 separated by AlOx barrier showed positive tunneling magnetoresistance (TMR) with a ratio of ~11 % at 15 K, indicating that Ti1-xCoxO2-d can be used as a spin injection electrode. The TMR decreased with increasing temperature and vanished above 180 K. TMR action at high temperature is likely prohibited by the inelastic tunneling conduction due to the low quality of the amorphous barrier layer and/or the junction interface.
Stable and switchable polarization of ferroelectric materials opens a possibility to electrically control their functional behavior. A particularly promising approach is to employ ferroelectric tunnel junctions where the polarization reversal in a ferroelectric barrier changes the tunneling current across the junction. Here, we demonstrate the reproducible tunneling electroresistance effect using a combination of Piezoresponse Force Microscopy (PFM) and Conducting Atomic Force Microscopy (C-AFM) techniques on nanometer-thick epitaxial BaTiO3 single crystal thin films on SrRuO3 bottom electrode…
A prototype of magnetoresistive random access memory (MRAM) based on magnetic tunnel junctions (MTJ) was fabricated with crossed-anisotropy of magnetic layers on either side of the tunnelling barrier layer. It is demonstrated that the introduction of crossed-anisotropy results in smaller switching fields and better switching times compared to the conventional case of aligned anisotropies. The magnetoresistive properties of fabricated devices are in good agreement with the micromagnetic model.
Magnetic tunnel junctions for spin-transfer torque switching were prepared to investigate the dielectric breakdown. The breakdown occurs typically at voltages not much higher than the switching voltages, a bottleneck for the implementation of spin-transfer torque Magnetic Random Access Memory. Intact and broken tunnel junctions are characterized by transport measurements and then prepared for transmission electron microscopy and energy dispersive x-ray spectrometry by focussed ion beam. The comparison to our previous model of the electric breakdown for thicker MgO tunnel barriers reveals signi…
Magnetic tunnel junctions (MTJs) with partially oxidized 9 ÅAlO$_x$-barriers were recently shown to have the necessary characteristics to be used as magnetoresistive sensors in high-density storage devices. Here we study dielectric breakdown in such underoxidized magnetic tunnel junctions, focusing on its dependence on tunnel junction area and oxidation time. A clear relation between breakdown mechanism and junction area is observed for the MTJs with the highest studied oxidation time: samples with large areas fail usually due to extrinsic causes (characterized by a smooth resistance decrease …
Based on spin-density functional theory we calculate the electronic structure of a tunnel junction consisting of two magnetic Fe layers separated by an insulating vacuum barrier selfconsistently. For the conductance the Landauer formula is evaluated in the ballistic limit as function of the magnetic configuration. Based on these conductances the tunnel magnetoresistance (TMR) ratio is obtained. We investigate the relation between TMR ratio and spin polarization of the electronic structure at the metal/insulator interface.
A quantum statistical theory of spin-dependent tunneling through asymmetric magnetic double barrier junctions is presented which describes $both$ ballistic and diffuse tunneling by a single analytical expression. It is evidenced that the key parameter for the transition between these two tunneling regimes is the electron scattering. For these junctions a strong asymmetric behaviour in the I-V characteristics and the tunnel magnetoresistance (TMR) is predicted which can be controlled by an applied magnetic field. This phenomenon relates to the quantum well states in the middle metallic layer. T…
The electronic structure and spin-dependent tunneling in epitaxial Fe/MgO/Fe(001) tunnel junctions are studied using first-principles calculations. For small MgO barrier thickness the minority-spin resonant bands at the two interfaces make a significant contribution to the tunneling conductance for the antiparallel magnetization, whereas these bands are, in practice, mismatched by disorder and/or small applied bias for the parallel magnetization. This explains the experimentally observed decrease in tunneling magnetoresistance (TMR) for thin MgO barriers. We predict that a monolayer of Ag epit…
A tunnel magnetic junction is considered with magnetic hard and magnetic soft layers of cubic symmetry. The magnetic switching is analyzed of the layers by a magnetic field perpendicular to the initial magnetizations. In such a situation, an additional peak of the TMR ratio appears at the magnetic field value lower substantially than the anisotropy energy of the soft layer.
Ultra-thin magnetic tunnel junctions with low resistive MgO tunnel barriers are prepared to examine their stability under large current stress. The devices show magnetoresistance ratios of up to 110 % and an area resistance product of down to 4.4 ohm micrometer squared. If a large current is applied, a reversible resistance change is observed, which can be attributed to two different processes during stressing and one relaxation process afterwards. Here, we analyze the time dependence of the resistance and use a simple model to explain the observed behavior. The explanation is further supporte…
We report tunnel magnetoresistance (TMR) ratios as high as 472% at room temperature and 804% at 5 K in pseudo-spin valve (SV) CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) annealed at 450oC, which is approaching the theoretically predicted value. By contrast, the TMR ratios for exchange-biased (EB) SV MTJs with a MnIr antiferromagnetic layer are found to drop when they are annealed at 450oC. Energy dispersive X-ray analysis shows that annealing at 450oC induces interdiffusion of Mn and Ru atoms into the MgO barrier and ferromagnetic layers in EB-SV MTJs. Mechanisms behind the different anne…
Magnetic Tunnel Junction devices find use in several applications based on the exploitation of the Spin-Transfer Torque phenomenon. The Ferromagnetic Resonance curve is a key characteristic of any Magnetic Tunnel Junctions. It is usually characterized both experimentally and numerically by performing a lot of measurements of the magnetic response to a sinusoidal field or current. Here we propose the use of a chirp signal as excitation signal to reconstruct the Ferromagnetic resonance curve with a single measurement/simulation. A micromagnetic comparison of the proposed method with the traditio…
We prepared magnetic tunnel junctions with one ferromagnetic and one superconducting Al-Si electrode. Pure cobalt electrodes were compared with a Co-Fe-B alloy and the Heusler compound Co2FeAl. The polarization of the tunneling electrons was determined using the Maki-Fulde-model and is discussed along with the spin-orbit scattering and the total pair-breaking parameters. The junctions were post-annealed at different temperatures to investigate the symmetry filtering mechanism responsible for the giant tunneling magnetoresistance ratios in Co-Fe-B/ MgO/ Co-Fe-B junctions.
The magnetic tunnel junction is a cornerstone of spintronic devices and circuits, providing the main way to convert between magnetic and electrical information. In state-of-the-art magnetic tunnel junctions, magnesium oxide is used as the tunnel barrier between magnetic electrodes, providing a uniquely large tunnel magnetoresistance at room temperature. However, the wide bandgap and band alignment of magnesium oxide-iron systems increases the resistance-area product and causes challenges of device-to-device variability and tunnel barrier degradation under high current. Here, we study using fir…
We investigate a wafer scale tunnel junction fabrication method, where a plasma etched via through a dielectric layer covering bottom Al electrode defines the tunnel junction area. The ex-situ tunnel barrier is formed by oxidation of the bottom electrode in the junction area. Room temperature resistance mapping over a 150 mm wafer give local deviation values of the tunnel junction resistance that fall below 7.5 % with an average of 1.3 %. The deviation is further investigated by sub-1 K measurements of a device, which has one tunnel junction connected to four arrays consisting of N junctions (…
Precisely engineered tunnel junctions exhibit a long sought effect that occurs when the energy of the electron is comparable to the potential energy of the tunneling barrier. The resistance of metal-insulator-metal tunnel junctions oscillates with an applied voltage when electrons that tunnel directly into the barrier's conduction band interfere upon reflection at the classical turning points: the insulator-metal interface, and the dynamic point where the incident electron energy equals the potential barrier inside the insulator. A model of tunneling between free electron bands using the exact…
Spin dependent single electron tunneling in ferromagnetic double junctions is analysed theoretically in the limit of sequential tunneling. The influence of discrete energy spectrum of the central electrode (island)on the spin accumulation, spin fluctuations and tunnel magnetoresistance is analysed numerically in the case of a nonmagnetic island. It is shown that spin fluctuations are significant in magnetic as well as in nonmagnetic junctions.
We study the effect of strain on magnetic tunnel junctions (MTJ) induced by a diamond like carbon (DLC) film. The junction resistance as well as the tunnel magnetoresistance (TMR) reduces with the DLC film. Non-equilibrium Green's function quantum transport calculations show that the application of biaxial strain increases the conductance for both the parallel and anti-parallel configurations. However, the conductance for the minority channel and for the anti-parallel configuration is significantly more sensitive to strain, which drastically increases transmission through a MgO tunnel barrier,…
Magnetic tunnel junctions with wide band gap semiconductor ZnTe barrier were fabricated. A very low barrier height and sizable magnetoresistance were observed in the Fe/ZnTe/Fe junctions at room temperature. The nonlinear I-V characteristic curve confirmed the observed magnetoresistance is due to spin-dependent tunneling effect. Temperature dependent study indicated that the total conductance of the junction is dominated by direct tunneling, with only a small portion from the hopping conduction through the defect states inside the barrier.
We investigated spin dependent transport through Fe/GaAs/Fe tunnel junctions. The tunneling magnetoresistance effect (TMR) was probed for different types of Fe/GaAs interfaces. For interfaces cleaned by hydrogen plasma the TMR effect is increased and observable at room temperature. If an epitaxial Fe/GaAs(001) interface is involved, the tunnel junction exhibits a bias dependent inversion of the TMR effect. This is a first experimental signature for band structure effects at a Fe/GaAs interface and relevant for spin injection experiments.
We study the evolution of perpendicularly magnetized tunnel junctions under 300 to 400 $^{\circ}$C annealing. The hysteresis loops do not evolve much during annealing and they are not informative of the underlying structural evolutions. These evolutions are better revealed by the frequencies of the ferromagnetic resonance eigenmodes of the tunnel junction. Their modeling provides the exchange couplings and the layers' anisotropies within the stack which can serve as a diagnosis of the tunnel junction state after each annealing step. The anisotropies of the two CoFeB-based parts and the two Co/…
Recently, several groups have reported spin-dependent thermoelectric effects in magnetic tunnel junctions. In this paper, we present a setup for time-resolved measurements of thermovoltages and thermocurrents of a single micro- to nanometer-scaled tunnel junction. An electrically modulated diode laser is used to create a temperature gradient across the tunnel junction layer stack. This laser modulation technique enables the recording of time-dependent thermovoltage signals with a temporal resolution only limited by the preamplifier for the thermovoltage. So far, time-dependent thermovoltage co…
We study the tunneling magneto thermo power (TMTP) in CoFeB/MgO/CoFeB magnetic tunnel junction nanopillars. Thermal gradients across the junctions are generated by a micropatterned electric heater line. Thermo power voltages up to a few tens of \muV between the top and bottom contact of the nanopillars are measured which scale linearly with the applied heating power and hence with the applied temperature gradient. The thermo power signal varies by up to 10 \muV upon reversal of the relative magnetic configuration of the two CoFeB layers from parallel to antiparallel. This signal change corresp…
Usually, graphene is used in its horizontal directions to design novel concept devices. Here, we report a single electron tunneling diode based on quantum tunneling through a vertical graphene two-barrier junction. The junction is formed by positioning a scanning tunnelling microscopy (STM) tip above a graphene nanoribbon that was deposited on a graphite surface. Because of the asymmetry of the two-barrier junction, the electrons can unidirectional transfer from the tip to the graphene nanoribbon but not from the graphene to the tip. This result opens intriguing opportunities for designing new…
The effects of the spin-orbit interaction on the tunneling magnetoresistance of ferromagnet/semiconductor/normal metal tunnel junctions are investigated. Analytical expressions for the tunneling anisotropic magnetoresistance (TAMR) are derived within an approximation in which the dependence of the magnetoresistance on the magnetization orientation in the ferromagnet originates from the interference between Bychkov-Rashba and Dresselhaus spin-orbit couplings that appear at junction interfaces and in the tunneling region. We also investigate the transport properties of ferromagnet/semiconductor/…
We examine the spin torque (ST) response of magnetic tunnel junctions (MTJs) with ultra-thin MgO tunnel barrier layers to investigate the relationship between the spin-transfer torque and the tunnel magnetoresistance (TMR) under finite bias. We find that the spin torque per unit current exerted on the free layer decreases by less than 10% over a bias range where the TMR decreases by over 40%. We examine the implications of this result for various spin-polarized tunneling models and find that it is consistent with magnetic-state-dependent effective tunnel decay lengths.
We study the tunneling magneto thermopower and tunneling magneto thermocurrent of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ). The devices show a clear change of the thermoelectric properties upon reversal of the magnetisation of the CoFeB layers from parallel to the antiparallel orientation. When switching from parallel to antiparallel the thermopower increases by up to 55% where as the thermocurrent drops by 45%. These observations can be well explained by the Onsager relations taking into account the tunneling magneto resistance of the MTJ. These findings contrast previous studies on Al…
This paper presents an overview of the statistical properties arising from the broadness of the distribution of tunnel currents in metal-insulator-metal tunnel junctions. Experimental current inhomogeneities can be modelled by a lognormal distribution and the size dependence of the tunnel current is modified at small sizes by the effect of broad distributions.
We have fabricated a spin-polarized tunneling device based on half metallic manganites incorporating $Ba_{2}LaNbO_{6}$ as insulating barrier. An anomalous bias dependence of tunnel magnetoresistance (TMR) has been observed, the first of its kind in a symmetric electrode tunnel junction with single insulating barrier. The bias dependence of TMR shows an extremely sharp zero bias anomaly, which can be considered as a demonstration of the drastic density of states variation around the Fermi level of the half metal. This serves as a strong evidence for the existence of minority spin tunneling stat…
We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltages that are high enough to quench the tunnel magnetoresistance, demonstrating that the current remains spin-polarized at these voltages.
Inverse magnetoresistance has been observed in magnetic tunnel junctions with pinhole nanocontacts over a broad temperature range. The tunnel magnetoresistance undergoes a change of sign at higher bias and temperature. This phenomenon is attributed to the competition between the spin conserved ballistic transport through the pinhole contact where the transmission probability is close to unity and spin polarized tunneling across the insulating spacer with weak transmittivity.
Oscillatory tunneling magnetoresistance (TMR) as a function of spacer thickness is investigated theoretically for a magnetic tunnel junction with a nonmagnetic layer inserted between the tunnel barrier and the ferromagnetic layer. TMR is characterized in an analytical form, that is expressed with the transmission and reflection amplitudes of single interfaces at the Fermi level, and by the extremal wavevectors. Electronic structures with multiple bands are taken into account in the derivation characterizing the TMR, and the proposed analytical expression can be directly applied to real junctio…
The capacitance of MgO based magnetic tunnel junctions (MTJs) has been observed to be magnetic field dependent. We propose an equivalent circuit for the MTJs with a parallel-leaky capacitance (Cl) across the series combination of geometric and interfacial capacitance. The analysis of junctions with different tunneling magnetoresistance values suggests higher Cl for low TMR junctions. Using Cole-Cole plots the capacitive nature of MTJs is manifested. Fitting with Maxwell-Wagner capacitance model validates the RC parallel network model for MTJs and the extracted field dependent parameters match …
