W. Czyzycki, E. Epple, L. Fabbietti, M. Golubeva, F. Guber, A. Ivashkin, M. Kajetanowicz, A. Krasa, F. Krizek, A. Kugler, K. Lapidus, E. Lisowski, J. Pietraszko… 展开作者
W. Czyzycki, E. Epple, L. Fabbietti, M. Golubeva, F. Guber, A. Ivashkin, M. Kajetanowicz, A. Krasa, F. Krizek, A. Kugler, K. Lapidus, E. Lisowski, J. Pietraszko, A. Reshetin, P. Salabura, Y. Sobolev, J. Stanislav, P. Tlusty, T. Torrieri, M. Traxler
备注:
40 pages, 38 figures version2 - the time schedule added, information about PMTs in Sec.III updated
We propose to build the Electromagnetic calorimeter for the HADES di-lepton spectrometer. It will enable to measure the data on neutral meson production from nucleus-nucleus collisions, which are essential for interpretation of dilepton data, but are unknown in the energy range of planned experiments (2-10 GeV per nucleon). The calorimeter will improve the electron-hadron separation, and will be used for detection of photons from strange resonances in elementary and HI reactions.
Detailed description of the detector layout, the support structure, the electronic readout and its performance studied via Monte Carlo simulations and series of dedicated test experiments is presented.
The device will cover the total area of about 8 m^2 at polar angles between 12 and 45 degrees with almost full azimuthal coverage. The photon and electron energy resolution achieved in test experiments amounts to 5-6%/sqrt(E[GeV]) which is sufficient for the eta meson reconstruction with S/B ratio of 0.4% in Ni+Ni collisions at 8 AGeV. A purity of the identified leptons after the hadron rejection, resulting from simulations based on the test measurements, is better than 80% at momenta above 500 MeV/c, where time-of-flight cannot be used.
Realtime calibration of the A4 electromagnetic lead fluoride calorimeter
在粒子物理和核物理中,足够的能量分辨率是量热法的关键问题。MAMI的A4宇称破坏实验的量热计是一个分段量热计,其中事件的能量通过对相邻通道的信号求和来确定。在这种情况下,各个模块的精确匹配对于获得良好的能量分辨率至关重要。我们研制了由1022个氟化铅(PbF_2)晶体组成的全吸收电磁量能器的校准程序。该过程通过求解线性方程组来重建单模块对事件的贡献,涉及1022 x 1022矩阵的求逆。该系统已在300至1500 MeV的束流能量下显示出其功能,并代表了一种新的快速方法,可使量热计永久保持在良好的校准状态。
Development and characterization of a large area silicon pad array for an electromagnetic calorimeter
我们目前的研究和开发工作的第一个版本的6*6阵列的硅垫探测器,在印度进行,为拟议的前向量热计(FOCAL)的ALICE合作升级计划的一部分,在欧洲核子研究中心。主要的动机是开发一个大面积的硅垫阵列实现高能量物理实验的挑战性要求,如低漏电流,高击穿电压,并评估其性能作为原型硅钨(Si-W)电磁(EM)量能器中的有源层。为了实现这些目标,在班加罗尔的Bharat Electronics Limited,在4英寸高电阻率N型晶片上设计了一个36焊盘的硅传感器,其单个焊盘尺寸为1 cm 2。该传感器已被用于组装原型硅钨量热计,并成功地与高能粒子束测试。本文报道了大面积硅传感器的设计、研制及其在实验室用放射源和高能粒子束上的特性。
Kinematic Fitting of electromagnetic calorimeter data - an improved method
Helmholtz-Institut für Strahlen- und Kernphysik and Cluster of Excellence ”Color meets Flavor”, Universität Bonn, Germany(波恩大学斯特拉斯尔与核物理亥姆霍兹研究所及“颜色遇见味道”卓越集群)
Istituto Nazionale di Fisica Nucleare Sezione di Torino(意大利国家核物理研究所都灵分部);Thomas Jefferson National Accelerator Facility(托马斯杰斐逊国家加速器设施);Istituto Nazionale di Fisica Nucleare, Sezione di Genova e Dipartimento di Fisica dell’Università(意大利国家核物理研究所热那亚分部及大学物理系);Istituto Nazionale di Fisica Nucleare, Sezione di CATANIA(意大利国家核物理研究所卡塔尼亚分部);University of Glasgow(格拉斯哥大学);Institut de Physique Nucléaire, CNRS/IN2P3, Université Paris-Saclay(巴黎萨克雷大学CNRS/IN2P3核物理研究所);Istituto Nazionale di Fisica Nucleare, Sezione di Roma Tor Vergata and Dipartimento di Fisica dell’Università di Roma Tor Vergata(意大利国家核物理研究所罗马托维加塔分部及罗马托维加塔大学物理系)