Spectral calibration and modeling of the NuSTAR CdZnTe pixel detectors
Takao Kitaguchi, Brian W. Grefenstette, Fiona A. Harrison, Hiromasa Miyasaka, Varun B. Bhalerao, Walter R. Cook, Peter H. Mao, Vikram R. Rana, Steven E. Boggs, Andreas C. Zoglauer
备注:
11 pages, 10 figures, to appear in Proceedings of the SPIE Conference 8145: UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XVII
核光谱望远镜阵列(NuSTAR)将是第一个聚焦于硬X射线(5-80 keV)波段的空间飞行任务。NuSTAR仪器携带两个共对准掠入射硬X射线望远镜。每个NuSTAR焦平面由四个2 mm CdZnTe混合像素探测器组成,每个探测器的有效收集面积为2 cm x 2 cm。每个混合电路由一个32 x 32的605微米像素阵列组成,用加州理工学院定制的低噪声NuCIT ASIC读出。为了将每个像素的光谱响应特性描述为满足科学校准要求所需的程度,我们开发了一个基于Geant 4的模型,并为NuSTAR混合设计定制了Shockley-Ramo定理。该模型结合了蒙特卡罗的X射线相互作用与随后的电荷传输内的检测器。使用Co-57,Eu-155和Am-241的放射性源的该模型和校准数据的组合使我们能够确定每个像素的电子和空穴迁移率寿命产品,并将实际性能与无缺陷材料的理想性能进行比较。
英文摘要:
The Nuclear Spectroscopic Telescope Array (NuSTAR) will be the first space mission to focus in the hard X-ray (5-80 keV) band. The NuSTAR instrument carries two co-aligned grazing incidence hard X-ray telescopes. Each NuSTAR focal plane consists of four 2 mm CdZnTe hybrid pixel detectors, each with an active collecting area of 2 cm x 2 cm. Each hybrid consists of a 32 x 32 array of 605 micron pixels, read out with the Caltech custom low-noise NuCIT ASIC. In order to characterize the spectral response of each pixel to the degree required to meet the science calibration requirements, we have developed a model based on Geant4 together with the Shockley-Ramo theorem customized to the NuSTAR hybrid design. This model combines a Monte Carlo of the X-ray interactions with subsequent charge transport within the detector. The combination of this model and calibration data taken using radioactive sources of Co-57, Eu-155 and Am-241 enables us to determine electron and hole mobility-lifetime products for each pixel, and to compare actual to ideal performance expected for defect-free material.
Tuning of Nuclear Spectroscopic Telescope Array (NuSTAR) Application Specific Integrated Circuits (ASICs) to improve low energy threshold of future Hard X-ray Imaging Detectors
Flight Performance of an advanced CZT Imaging Detector in a Balloon-borne Wide-Field Hard X-ray Telescope - ProtoEXIST1
我们成功地进行了第一次高空气球飞行的宽视场硬X射线编码孔径望远镜ProtoEXIST 1,这是从哥伦比亚科学气球设施发射的。2009年10月9日,新墨西哥州萨姆纳。ProtoEXIST 1是我们正在进行的项目中第一次实现先进的CdZnTe(CZT)成像探测器,以建立下一代宽视场硬X射线望远镜所需的技术。ProtoEXIST 1中的CZT探测器平面由一个8 x 8阵列组成,该阵列由2 cm x 2 cm x 0.5 cm厚的像素化CZT晶体紧密平铺而成,每个晶体具有8 x 8像素,覆盖256 cm^2的有效面积,像素为2.5 mm。安装在探测器上方90 cm处的钨掩模提供30 - 600 keV波段的X射线源的阴影图用于成像,允许9度x 9度的完全编码视场,角分辨率为20 arcmin。为了减少背景辐射,探测器四周被半渐变(Pb/Sn/Cu)被动屏蔽层包围,一直到掩模。在背面,一个26 cm x 26 cm x 2 cm CsI(Na)有源屏蔽提供信号,以标记带电粒子感应事件以及来自下方的>~ 100 keV背景光子。由于在漂浮高度(38-39公里)的强风(60节),飞行持续时间仅约7.5小时。在整个飞行过程中,CZT探测器表现出色。望远镜在飞行结束时观察了Cyg X-1约1小时。尽管指向和方位系统存在一些问题,导致望远镜跟踪偏离目标约6.4度,但对天鹅座X-1数据的分析显示,在机载…
Testing Station for Fast Screening of Through Silicon Via (TSV)-enabled Application Specific Integrated Circuits (ASICs) for Hard X-ray Imaging Detectors