Energetic particle irradiation of solids can cause surface ultra-smoothening, self-organized nanoscale pattern formation, or degradation of the structural integrity of nuclear reactor components. Periodic patterns including high-aspect ratio quantum dots, with occasional long-range order and characteristic spacing as small as 7 nm, have stimulated interest in this method as a means of sub-lithographic nanofabrication. Despite intensive research there is little fundamental understanding of the mechanisms governing the selection of smooth or patterned surfaces, and precisely which physical effects cause observed transitions between different regimes has remained a matter of speculation. Here we report the first prediction of the mechanism governing the transition from corrugated surfaces to flatness, using only parameter-free molecular dynamics simulations of single-ion impact induced crater formation as input into a multi-scale analysis, and showing good agreement with experiment. Our results overturn the paradigm attributing these phenomena to the removal of target atoms via sputter erosion. Instead, the mechanism dominating both stability and instability is shown to be the impact-induced redistribution of target atoms that are not sputtered away, with erosive effects being essentially irrelevant. The predictions are relevant in the context of tungsten plasma-facing fusion reactor walls which, despite a sputter erosion rate that is essentially zero, develop, under some conditions, a mysterious nanoscale topography leading to surface degradation. Our results suggest that degradation processes originating in impact-induced target atom redistribution effects may be important, and hence that an extremely low sputter erosion rate is an insufficient design criterion for morphologically stable solid surfaces under energetic particle irradiation.
In this work, a multiscale approach based on phase field was developed to simulate the microstructure's evolution under irradiation in binary systems, from atomic to microstructural scale. For that purpose, an efficient numerical scheme was developed. In the case of AgCu alloy under Krypton ions irradiation, phenomenological parameters were computed using atomistic methods, as a function of the temperature and the irradiation flux. As a result, we predicted the influence of the irradiation flux and the temperature on the formation of patterned microstructures. In the case of AgCu, our model wa…
In this work we develop an ab initio informed rate theory model to track the spatial and temporal evolution of implanted ions (Cr+) in Fe and Fe-14%Cr during high dose irradiation. We focus on the influence of the specimen surface, the depth dependence of ion-induced damage, the damage rate, and the consequences of ion implantation, all of which influence the depth dependence of alloy composition evolving with continued irradiation. We investigate chemical segregation effects in the material by considering the diffusion of the irradiation-induced defects. Moreover, we explore how temperature, …
The low energy structures of irradiation-induced defects have been studied in detail, as these determine the available modes by which a defect can diffuse or relax. As a result, there are many studies concerning the relative energies of possible defect structures, and empirical potentials are commonly fitted to or evaluated with respect to these energies. But recently [Dudarev et al Nuclear Fusion 2018], we have shown how to determine the stresses, strains and swelling of reactor components under irradiation from the elastic properties of ensembles of irradiation-induced defects. These elastic…
The evolution of point defect concentrations under irradiation is controlled by their diffusion properties, and by their formation and elimination mechanisms. The latter include the mutual recombination of vacancies and interstitials, and the elimination of point defects at sinks. We show here that the modelling of this evolution by means of atomistic kinetic Monte Carlo (AKMC) simulations, necessarily using small system sizes, introduces strong space and time correlations between the vacancies and interstitials, which may strongly affect the recombination rate and the point defect concentrati…
We review the results of our research on damage mechanisms in materials irradiated with femtosecond free-electron-laser (FEL) pulses. They were obtained using our hybrid approach, XTANT (X-ray-induced Thermal And Nonthermal Transitions). Various damage mechanisms are discussed with respect to the pulse fluence and material properties on examples of diamond, amorphous carbon, C60 crystal, and silicon. We indicate conditions: producing thermal melting of targets as a result of electron-ion energy exchange; nonthermal phase transitions due to modification of the interatomic potential; Coulomb exp…
Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To …
Magnetization reversal and domain wall dynamics in Pt/Co/AlOx trilayers have been tuned by He+ ion irradiation. Fluences up to 1.5x10$^{15}$ ions/cm$^2$ strongly decrease the perpendicular magnetic anisotropy (PMA), without affecting neither the spontaneous magnetization nor the strength of the Dzyaloshinskii-Moriya interaction (DMI). This confirms the robustness of the DMI interaction against interfacial chemical intermixing, already predicted by theory. In parallel with the decrease of the PMA in the irradiated samples, a strong decrease of the depinning field is observed. This allows the do…
The whole Al-Li phase diagram is predicted from first principles calculations and statistical mechanics including the effect of configurational and vibrational entropy. The formation enthalpy of different configurations at different temperatures was accurately predicted by means of cluster expansions that were fitted from first principles calculations. The vibrational entropic contribution of each configuration was determined from the bond length vs. bond stiffness relationships for each type of bond and the Gibbs free energy of the different phases was obtained as a function of temperature fr…
We present a theoretical investigation of the yet unexplored ultrafast processes and dynamics of the produced excited carriers upon irradiation of Silicon with femtosecond pulsed lasers in the mid-infrared (mid-IR) spectral region. The evolution of the carrier density and thermal response of the electron-hole and lattice subsystems are analysed for various wavelengths λL in the range between 2.2 μm and 3.3 μm where the influence of two and three-photon absorption mechanisms is explored. The role of induced Kerr effect is highlighted and it manifests a more pronounced influence at smaller wavel…
The practical damage of silicon bipolar devices subjected to mixed ionization and displacement irradiations is usually evaluated by the sum of separated ionization and displacement damages. However, recent experiments show clear difference between the practical and summed damages, indicating significant irradiation synergistic effects (ISEs). Understanding the behaviors and mechanisms of ISEs is essential to predict the practical damages. In this work, we first make a brief review on the state of the art, critically emphasizing on the difficulty encountered in previous models to understand the…
Nanocrystalline metals are promising radiation tolerant materials due to their large interfacial volume fraction, but irradiation-induced grain growth can eventually degrade any improvement in radiation tolerance. Therefore, methods to limit grain growth and simultaneously improve the radiation tolerance of nanocrystalline metals are needed. Amorphous intergranular films are unique grain boundary structures that are predicted to have improved sink efficiencies due to their increased thickness and amorphous structure, while also improving grain size stability. In this study, ball milled nanocry…
Ion-irradiated FeCr alloys are useful for understanding and predicting neutron-damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation-induced defects, probed by transmission electron microscopy (TEM), as well as changes in mechanical properties. Across these studies, a wide range of irradiation conditions has been employed on samples with different processing histories, which complicates the analysis of the relationship between defect structures and material properties. Furthermore, key properties, such as irradiation-i…
Noting the structural relationships between phases of carbon and boron carbide with phases of boron nitride and boron subnitride, we investigate their mutual solubilities using a combination of first principles total energies supplemented with statistical mechanics to address finite temperatures. Owing to large energy costs of substitution, we find the mutual solubilities of the ultra hard materials diamond and cubic boron nitride are negligible, and the same for the quasi-two dimensional materials graphite and hexagonal boron nitride. In contrast, we find a continuous range of solubility conn…
First Principles Phase Diagram Calculations for the Octahedral-Interstitial System $HfO_{X}$, $0 \leq X \leq 1/2$
用第一性原理计算了六方密排八面体间隙固溶体体系$αHfO_{X} ($ αHf[ ]_{1-X} O_{X} $; [ ]=Vacancy; $ 0 \leq X \leq 1/2 $). The cluster expansion method was used to do a ground state analysis, and to calculate the phase diagram. The predicted diagram has four ordered ground-states in the range $ 0 \leq X \leq 1/2 $, but one of these, at X=5/12, is predicted to disproportionate at T$ \approx 220 K $. At X$ \approx 1/3（$Hf_{3}O$）和X $\approx 1/2 ($ Hf_{2} O$），序参数与温度的关系图预测了紧密相关的有序结构的魔鬼阶梯。
Density functional theory calculations can be used to identify dominant reaction mechanisms. However, the dominant reaction mechanism is sensitive to choice of the exchange correlation functional. Here, we demonstrate using the example case of chlorine evolution reaction on rutile oxides, which can occur through at least three reaction mechanisms each mediated by different surface intermediates and active sites. We utilize Bayesian error estimation capabilities within the BEEF-vdW exchange correlation (XC) functional to quantify the uncertainty associated with predictions of the operative reac…
Density Functional Theory (DFT) calculations have been widely used to predict the activity of catalysts based on the free energies of reaction intermediates. The incorporation of the state of the catalyst surface under the electrochemical operating conditions while constructing the free energy diagram is crucial, without which even trends in activity predictions could be imprecisely captured. Surface Pourbaix diagrams indicate the surface state as a function of the pH and the potential. In this work, we utilize error-estimation capabilities within the BEEF-vdW exchange correlation functional a…
Understanding the high-pressure behavior of C-H system is of great importance due to its key role in organic, bio-, petroleum and planetary chemistry. We have performed a systematic investigation of the pressure-composition phase diagram of the C-H system at pressures up to 400 GPa using evolutionary structure prediction coupled with ab initio calculations and discovered that only saturated hydrocarbons are thermodynamically stable. Several stable methane-hydrogen co crystals are predicted: 2CH4 * H2, earlier obtained experimentally, is predicted to have I4/m space group and 2-90 GPa stability…
We present a comprehensive study of voids formation, nucleation and growth in a prototype model of binary alloys subjected to irradiation by using a combined approach based on phase field and rate theories. It is shown that voids formation is caused by interaction of irradiation-produced vacancies through elastic deformation of a lattice and vacancy coupling with composition field of the alloy. Phase diagrams illustrating the formation of states related to solid solution, phase decomposition, and patterning are obtained. Formation of voids from supersaturated ensemble of vacancies is accompani…
First principles phase diagram calculations, that included van der Waals interactions, were performed for the bulk transition metal dichalcogenide system $(1-X) \cdot WS_{2} - (X) \cdot WTe_{2}$. To obtain a converged phase diagram, a series of cluster expansion calculations were performed with increasing numbers of structure-energies, ($N_{Str}$) up to $N_{Str}=435$, used to fit the cluster expansion Hamiltonian. All calculated formation energies are positive and all ground-state analyses predict that formation energies for supercells with 16 or fewer anion sites are positive; but when $\appr…
We have performed first principles study for bismuth crystal structure at pressure from 0~14 GPa based on structure search and quasi-harmonic approximation. A new stable phase with Pbcm symmetry is predicted by structure search method. We find that the most stable structures of bismuth at 0 K are R-3m(0 ~ 3.29 GPa), Pbcm (3.29 GPa ~ 4.91 GPa), Cmce (4.91 GPa ~ 10.57 GPa) and Im-3m ( > 10.57 GPa), respectively. By quasi-harmonic approximation, we predicted the phase diagram of bismuth from first principles calculations. We found that the phase transition pressure reduces with increasing tempera…
In this work, global search for crystal structures of ternary Mg-Sc-H hydrides (Mg$_x$Sc$_y$H$_z$) under high pressure ($100 \le P \le 200$ GPa) were performed using the evolutionary algorithm and first-principles calculations. Based on them, we computed the thermodynamic convex hull and pressure-dependent phase diagram of Mg$_x$Sc$_y$H$_z$ for $z/(x+y) < 4$. We have identified the stable crystal structures of four thermodynamically stable compounds with the higher hydrogen content, i.e., $R\bar{3}m$-MgScH$_{6}$, $C2/m$-Mg$_{2}$ScH$_{10}$, $Immm$-MgSc$_{2}$H$_{9}$ and $Pm\bar{3}m$-Mg(ScH$_{4}$…
A first principles phase diagram calculation, that included van der Waals interactions, was performed for the system (1-X)$\cdot$MoS$_{2}$-(X)$\cdot$MoTe$_{2}$. Surprisingly, the predicted phase diagram has at least two ordered solid-solution phases, at $X \approx 0.46$, even though all calculated formation energies are positive, in a ground-state analysis that examined all configurations with 16 or fewer anion sites. The lower-temperature {\bf $I$}-phase is predicted to transform to a higher-temperature {\bf $I^{\prime}$}-phase at $T \approx 500K$, and {\bf $I^{\prime}$} disorders at $T \appr…
We investigate the binary phase diagram of helium and iron using first-principles calculations. We find that helium, which is a noble gas and inert at ambient conditions, forms stable crystalline compounds with iron at terapascal pressures. A FeHe compound becomes stable above 4 TPa, and a FeHe$_2$ compound above 12 TPa. Melting is investigated using molecular dynamics simulations, and a superionic phase with sublattice melting of the helium atoms is predicted. We discuss the implications of our predicted helium-iron phase diagram for interiors of giant (exo)planets and white dwarf stars.
We reproduce the mirror Chern number phase diagram for the quaternary compound Pb1-xSnxSe1-yTey combining accurate density functional theory and tight-biding model. The tight binding models are extracted from ab-initio results, adding constraints to reproduce the experimental results. By using the virtual crystalline approximation, we calculated the mirror Chern number as a function of the concentrations x and y. We report different hamiltonians depending on whether we want to focus on the experimental band gap or on the experimental topological transition. We calculate the transition line bet…
Despite the simplicity of its molecular unit, water is a challenging system because of its uniquely rich polymorphism and predicted but yet unconfirmed features. Introducing a novel space of generalized coordinates that capture changes in the topology of the interatomic network, we are able to systematically track transitions among liquid, amorphous and crystalline forms throughout the whole phase diagram of water, including the nucleation of crystals above and below the melting point. Our approach, based on molecular dynamics and enhanced sampling / free energy calculation techniques, is not …
Phase stability and properties of two-dimensional phosphorus carbide, P$_x$C$_{1-x}$, are investigated using the first-principles method in combination with cluster expansion and Monte Carlo simulation. Monolayer P$_x$C$_{1-x}$ is found to be a phase separating system which indicates difficulty in fabricating monolayer P$_x$C$_{1-x}$ or crystalline P$_x$C$_{1-x}$ thin films. Nevertheless, a bottom-up design approach is used to determine the stable structures of P$_x$C$_{1-x}$ of various compositions which turn out to be superlattices consisting of alternating carbon and phosphorus nanoribbons …
