We present a density functional theory investigation of strained Ca$_{0.5}$Sr$_{0.5}$TiO$_3$. We have determined the structure and polarization for a number of arrangements of Ca and Sr in a 2$\times$2$\times$2 supercell. The a and b lattice vectors are strained to match the lattice constants of the rotated Si(001) face. To set the context for the CSTO study, we also include simulations of the Si(001) constrained structures for CaTiO$_3$ and SrTiO$_3$. Our primary findings are that all Ca$_{0.5}$Sr$_{0.5}$TiO$_3$ structures examined except one are ferroelectric, exhibiting polarizations ranging from 0.08 C/m$^2$ for the lowest energy configuration to about 0.26 C/m$^2$ for the higher energy configurations. We find that the configurations with larger polarizations have lower c/a ratios. The net polarization of the cell is the result of Ti-O ferroelectric displacements regulated by A-site cations.
Density functional calculations are performed to study the effect of epitaxial strain on PbZrO3. We find a remarkably small energy difference between the epitaxially strained polar R3c and nonpolar Pbam structures over the full range of experimentally accessible epitaxial strains -3% < η< 4%. While ferroelectricity is favored for all compressive strains, for tensile strains the small energy difference between the nonpolar ground state and the alternative polar phase yields a robust antiferroelectric ground state. The coexistence of ferroelectricity and antiferroelectricity observed in thin fil…
Epitaxial CaMnO3 films grown with 2.3% tensile strain on (001)-oriented LaAlO3 substrates are found to be incipiently ferroelectric below 25 K. Optical second harmonic generation (SHG) was used for the detection of the incipient polarization. The SHG analysis reveals that CaMnO3 crystallites with in-plane orientation of the orthorhombic b axis contribute to an electric polarization oriented along the orthorhombic a (resp.\ c) axis in agreement with the predictions from density functional calculations.
PbTiO$_3$ is a simple but very important ferroelectric oxide that has been extensively studied and widely used in various technological applications. However, most previous studies and applications were based on the bulk material or the conventional [$001$]-orientated films. There are few studies on PbTiO$_3$ films grown along other crystalline axes. In this study, a first-principles calculation was performed to compute the polarization of PbTiO$_3$ films strained by SrTiO$_3$ and LaAlO$_3$ substrates. Our results show that the polarization of PbTiO$_3$ films strongly depends on the growth ori…
The structure and polarization of the as-yet hypothetical Ruddlesden-Popper compound Pb$_2$TiO$_4$ are investigated within density-functional theory. Zone enter phonons of the high-symmetry K$_2$NiF$_4$-type reference structure, space group $I4/mmm$, were calculated. At the theoretical ground-state lattice constants, there is one unstable infrared-active phonon. This phonon freezes in to give the $I2mm$ ferroelectric state. As a function of epitaxial strain, two additional ferroelectric phases are found, with space groups $I4mm$ and $F2mm$ at compressive and tensile strains, respectively.
We propose to insert TiO layers to perovskite ATiO$_{3}$ to form a superlattice and use first-principles calculations to investigate its basic properties. Our computational analysis shows that the structure, which consists of repeated ATiO_{3} and TiO layers, has strong anisotropic conductivity. The structure immediately suggests a possible control of its conductivity by ion displacements related to its intrinsic ferroelectricity. In addition, we have obtained the structural information of its low-energy phases with the aid of phonon calculation and examined their evolution with epitaxial stra…
We use first principles density functional theory calculations to investigate the effect of biaxial strain in the low-temperature structural and ferroelectric properties of [111]-oriented SrTiO$_3$. We find that [111] biaxial strain, achievable by coherent epitaxial growth along the [111] direction, induces structural distortions in SrTiO$_3$ that are not present in either bulk or [001]-oriented SrTiO$_3$. Under [111] biaxial strain, SrTiO$_3$ displays ferroelectricity at tensile strain, and paraelectricity at compressive strain. We compute the phonon spectrum and macroscopic polarization of S…
We report on theoretical and experimental investigation of A-site driven ferroelectricity in ferromagnetic La2NiMnO6 thin films grown on SrTiO3 substrates. Structural analysis and density functional theory calculations show that epitaxial strain stretches the rhombohedral La2NiMnO6 crystal lattice along the [111]cubic direction, triggering a displacement of the A-site La ions in the double perovskite lattice. The lattice distortion and the A-site displacements stabilize a ferroelectric polar state in ferromagnetic La2NiMnO6 crystals. The ferroelectric state only appears in the rhombohedral La2…
Very recently there was a report of the discovery using piezoelectric force microscopy (PFM) of a switchable ferroelectric polarization in 1.6 % tensile strained TiO2 thin film with anatase crystal structure (see N. Deepak et al. Adv. Funct. Mater. 2014, 24, 2844). The polarization disappeared only above 450 K, which was assigned as a Curie temperature, Tc. Here we have performed X-ray diffraction, second-harmonic generation (SHG) and infrared investigations of the same films. Phonon frequencies exhibit less than a 10 % shift down with the tensile strain and no anomaly near expected TC. SHG ex…
Using first-principle calculations, we restrained the m=1 oxyfluoride Aurivillius Bi$_2$TiO4F$_2$ to adopt three ordered key configurations, such as tetragonal $I4/mmm$ phases with fluorine anions distributed either at the octahedral apical sites or at the octahedral equatorial ones and orthorhombic $Pma2$ phase with fluorine anions distributed over both apical and equatorial sites. We explored the energetics of the metastable phases and their potential for ferroelectricity and found that the least favorable configuration is equatorial sites for fluorine and the most favorable one is the mixtu…
Fluctuating orders in solids are generally considered high-temperature precursors of broken symmetry phases. However, in some cases these fluctuations persist to zero temperature and prevent the emergence of long-range order, as for example observed in quantum spin and dipolar liquids. $SrTiO_3$ is a quantum paraelectric in which dipolar fluctuations grow when the material is cooled, although a long-range ferroelectric order never sets in. We show that the nonlinear excitation of lattice vibrations with mid-infrared optical pulses can induce polar order in $SrTiO_3$ up to temperatures in exces…
Low dimensional ferroelectrics are highly desired for applications and full of exotic physics. Here a functionalized MXene Hf$_2$CF$_2$ monolayer is theoretically studied, which manifests a nonpolar to polar transition upon moderate biaxial compressive strain. Accompanying this structural transition, a metal-semiconductor transition occurs. The in-plane shift of unilateral fluorine layer leads to a polarization pointing out-of-plane. Such ferroelectricity is unconventional, similar to the recently-proposed interlayer-sliding ferroelectricity but not identical. Due to its specific hexapetalous …
Zirconia and hafnia based thin films have attracted tremendous attention in the last decade due to their unexpected ferroelectric behavior at the nanoscale, which facilitates the downscaling of ferroelectric devices. The present work reports a novel ferroelectric rhombohedral phase of ZrO2 that can be achieved in thin films grown on (111)- Nb:SrTiO3 substrates by ion-beam sputtering. Structural and ferroelectric characterizations reveal that the (111)-oriented ZrO2 films are under epitaxial compressive strain and display a switchable ferroelectric polarization of about 20.2 μC/cm2 with a coerc…
LaNiO$_{3}$-BaTiO$_{3}$ superlattices with different types of interfaces are studied from first-principles density-functional theory. It is revealed that the ferroelectricity in the superlattice with (NiO$_2$)$^-$/(BaO)$^0$ interfaces is enhanced from that of the superlattice with (LaO)$^+$/(TiO$_2$)$^0$ interfaces. The origin lies at the polar discontinuity at the interface, which makes the holes localized within the (NiO$_2$)$^-$/(BaO)$^0$ interface, but drives a penetration of electrons into BaTiO$_3$ component near (LaO)$^+$/(TiO$_2$)$^0$ interface. Our calculations demonstrate an effectiv…
Ferroelectric (FE) metals have been attracting attention as they possess both metallicity and ferroelectricity, the two seemingly incompatible physical properties. An important problem for both fundamental research and potential applications is how to realize a strong FE metal. One strategy is to dope a strong FE insulator into an FE metal provided that the induced free electrons do not destroy FE distortion. Strained EuTiO$_{3}$ film is a strong FE ferromagnet and a promising candidate for such a strategy. Here, we calculate the structural, electronic, and polarization properties of Nb-doped …
We performed first principles calculations for epitaxially strained orthorhombic CaTiO$_3$. The computational results reveal the existence of a metastable ferroelectric phase at compressive strain with unexpected in-plane polarization. Symmetry analysis indicates that two distortion modes at the X point combine to induce the polarization, leading to characterization as a hybrid improper ferroelectric. Our work demonstrates a mechanism for improper ferroelectricity in simple perovskites without the need for symmetry lowering by layering or cation ordering.
Environmentally benign (1-x)Ba(Ti$_{0.8}$Zr$_{0.2}$)O$_3$-x(Ba$_{0.7}$Ca$_{0.3}$)TiO$_3$ (BZT-BCT) ceramics are promising materials due to their remarkable high piezoresponse [Liu and Ren, Phys. Rev. Lett. \textbf{103}, 257602 (2009)]. In this Letter, by focusing on local and average structure in combination with macroscopic electromechanical and dielectric measurements we demonstrate the structure property relationship in the tetragonal BZT-BCT ceramic. During high-temperature cubic to tetragonal phase transformation, polar nanoregions are manifested through the spontaneous volume ferroelectr…
Titanates with the perovskite structure, including ferroelectrics (e.g., BaTiO$_3$) and ferromagnetic ones (e.g., YTiO$_3$), are important functional materials. Recent theoretical studies predicted multiferroic states in strained EuTiO$_3$ and titanate superlattices, the former of which has already been experimental confirmed. Here, a first-principles calculation is performed to investigate the structural, magnetic, and electronic properties of Y half-substituted LaTiO3. Our results reveal that the magnetism of Y$_{0.5}$La$_{0.5}$TiO$_3$ sensitively depends on its structural details because of…
We report the relationship between epitaxial strain and the crystallographic orientation of the in-phase rotation axis and A-site displacements in Pbnm-type perovskite films. Synchrotron diffraction measurements of EuFeO3 films under strain states ranging from 2% compressive to 0.9% tensile on cubic or rhombohedral substrates exhibit a combination of a-a+c- and a+a-c- rotational patterns. We compare the EuFeO3 behavior with previously reported experimental and theoretical work on strained Pbnm-type films on non-orthorhombic substrates, as well as additional measurements from LaGaO3, LaFeO3, an…
(Ba,Ca)TiO$_3$ and Ba(Ti,Zr)O$_3$ solid solutions are the building blocks of lead-free piezoelectric materials that attract a renewed interest. We investigate the properties of these systems by means of first-principles calculations, with a focus on the lattice dynamics and the competition between different ferroelectric phases. We first analyze the four parent compounds in order to compare their properties and their different tendency towards ferroelectricity. The core of our study is systematic characterization of the binary systems (Ba,Ca)TiO$_3$ and Ba(Ti,Zr)O$_3$ within both the Virtual C…
After decades of searching for robust nanoscale ferroelectricity that could enable integration into the next generation memory and logic devices, hafnia-based thin films have appeared as the ultimate candidate because their ferroelectric (FE) polarization becomes more robust as the size is reduced. This exposes a new kind of ferroelectricity, whose mechanism still needs to be understood. Towards this end, thin films with increased crystal quality are needed. We report the epitaxial growth of Hf0.5Zr0.5O2 (HZO) thin films on (001)-oriented La0.7Sr0.3MnO3/SrTiO3 (STO) substrates. The films, whic…
Construction of First Principle Based Adiabatic and Diabatic Hamiltonian for TiO$_6^{8-}$ unit of BaTiO$_3$ Crystal: Photoemission Spectra and Ferroelectricity
Subcoercive-field dielectric response of $0.5(\text{Ba}_{0.7}\text{Ca}_{0.3}\text{TiO}_{3})-0.5(\text{BaZr}_{0.2}\text{Ti}_{0.8}\text{O}_{3})$ thin film: peculiar third harmonic signature of phase transitions and residual ferroelectricity
We investigate the impact of uniaxial strain on atomic shifts, dipolar interactions, polarization and electric permittivity in TiO$_2$ (rutile) by using two different implementations of density functional theory. It is shown that calculations using the Vienna ab inito simulation package (VASP) and the plane-wave self-consistent field method (PWscf) yield qualitatively the same atomic relaxations and ferroelectric trends under strain. The phonon dispersion curves of unstrained and strained TiO$_2$ (rutile) obtained by employing the linear response method confirm previous calculations of the gia…
Oxyhydroxide minerals like FeOOH have been a research focus in geology for studying the Earth interior, and also in chemistry for studying oxygen electrocatalysis activity. In this paper we provide first-principles evidence of a new class of ferroelectrics or multiferroics among them:GaOOH,InOOH,CrOOH,FeOOH, which are earth-abundant minerals and have been experimentally verified to possess distorted rutile structures, are ferroelectric with considerable polarizations(up to 24 muC/cm2) and piezoelectric coefficients. Their atomic-thick layer may possess vertical polarization robust against depo…
We report a systematic first-principles study based on density functional theory (DFT) of the structural and ferroelectric properties of the $R_2$Ti$_2$O$_{7}$ perovskite-related oxides with $R=$ La, Ce, Pr, and Nd. We show that, in all cases, the ferroelectric distortion to the ground-state polar $P2_1$ structure from its parent centrosymmetric $P2_1/m$ phase is driven by a single polar soft mode consisting of rotations and tilts of the TiO$_6$ octahedra combined with displacements of the $R$ ions. A secondary centrosymmetric distortion, which is stable in the parent structure, contributes su…
Ca$_3$Ti$_2$O$_7$ is an experimentally confirmed hybrid improper ferroelectric material, in which the electric polarization is induced by a combination of the coherent TiO$_6$ octahedral rotation and tilting. In this work, we investigate the tuning of ferroelectricity of Ca$_3$Ti$_2$O$_7$ using iso-valent substitutions on Ca-sites. Due to the size mismatch, larger/smaller alkaline earths prefer $A$'/$A$ sites respectively, allowing the possibility for site-selective substitutions. Without extra carriers, such site-selected iso-valent substitutions can significantly tune the TiO$_6$ octahedral …
An emerging area in condensed matter physics is the use of multilayered heterostructures to enhance ferroelectricity in complex oxides. Here, we demonstrate that optically pumping carriers across the interface between thin films of a ferroelectric (FE) insulator and a ferromagnetic metal can significantly enhance the FE polarization. The photoinduced FE state remains stable at low temperatures for over one day. This occurs through screening of the internal electric field by the photoexcited carriers, leading to a larger, more stable polarization state that may be suitable for applications in a…
The (001) surfaces of polar perovskites BaTiO$_3$ and PbTiO$_3$ have been studied from first principles at T=0 K. For both cases of polarization, the most stable TiO-terminated interfaces show intrinsic ferroelectricity. In the topmost layer, where the O atoms are $>$0.1 Åabove Ti, this leads to metallic instead of the insulating behavior of the electronic states that may have important implications for multiferroic tunneling junctions.
We propose the design of low strained and energetically favourable mono and bilayer graphene overlayer on anatase TiO$_2$ (001) surface and examined the electronic structure of the interface with the aid of first principle calculations. In the absence of hybridization between surface TiO$_2$ and graphene states, dipolar fluctuations govern the minor charge transfer across the interface. As a result, both the substrate and the overlayer retain their pristine electronic structure. The interface with the monolayer graphene retains its gapless linear band dispersion irrespective of the induced epi…
Strain engineering vanadium dioxide thin films is one way to alter this material's characteristic first order transition from semiconductor to metal. In this study we extend the exploitable strain regime by utilizing the very large lattice mismatch of 8.78 % occurring in the VO$_2$/RuO$_2$ system along the c axis of the rutile structure. We have grown VO$_2$ thin films on single domain RuO$_2$ islands of two distinct surface orientations by atomic oxygen-supported reactive MBE. These films were examined by spatially resolved photoelectron and x-ray absorption spectroscopy, confirming the corre…
Lattice structure can dictate electronic and magnetic properties of a material. Especially, reconstruction at a surface or heterointerface can create properties that are fundamentally different from those of the corresponding bulk material. We have investigated the lattice structure on the surface and in the thin films of epitaxial SrRuO3 with the film thickness up to 22 pseudo-cubic unit cells (u.c.), using the combination of surface sensitive low energy electron diffraction and bulk sensitive scanning transmission electron microscopy. Our analysis indicates that, in contrast to many perovski…
The effect of epitaxial strain on structural, magnetic and electronic properties of BaFeO 3 per- ovskite oxide are investigated from first principles calculations, using the Density Functional The- ory (DFT) plus the Hubbard approach (DFT+U) within the Generalized Gradient Approximation (GGA). Hybrid functional calculations, based on mixed exact Hartree-Fock (HF) and DFT exchange energy functionals, are also performed. For the ground state calculations,the DFT+U is found more suitable to describe the half metallic and ferromagnetic state of cubic BaFeO 3 . The possible oc- curence of oxygen oc…
In this study, we present the results of our first-principles calculations of the band structure, density of states and the Born effective charge tensors for the ferroelectric (ground state B1a1) and paraelectric (I4/mmm) phases of bismuth titanate. The calculations are done using the generalized gradient approximation (GGA) as well as the local density approximation (LDA) of the density functional theory. In contrast to the literature, our calculations on B1a1 structure using GGA and LDA yield smaller indirect band gaps as compared to the direct band gaps, in agreement with the experimental d…
Multiferroics are materials where two or more ferroic orders coexist owing to the interplay between spin, charge, lattice and orbital degrees of freedom. The explosive expansion of multiferroics literature in recent years demon-strates the fast growing interest in this field. In these studies, the first-principles calculation has played a pioneer role in the experiment explanation, mechanism discovery and prediction of novel multiferroics or magnetoelectric materials. In this review, we discuss, by no means comprehensively, the extensive applications and successful achievements of first-princi…
