Strain engineering vanadium dioxide thin films is one way to alter this material's characteristic first order transition from semiconductor to metal. In this study we extend the exploitable strain regime by utilizing the very large lattice mismatch of 8.78 % occurring in the VO$_2$/RuO$_2$ system along the c axis of the rutile structure. We have grown VO$_2$ thin films on single domain RuO$_2$ islands of two distinct surface orientations by atomic oxygen-supported reactive MBE. These films were examined by spatially resolved photoelectron and x-ray absorption spectroscopy, confirming the correct stoichiometry. Low energy electron diffraction then reveals the VO$_2$ films to grow indeed fully strained on RuO$_2$(110), exhibiting a previously unreported ($2\times2$) reconstruction. On TiO$_2$(110) substrates, we reproduce this reconstruction and attribute it to an oxygen-rich termination caused by the high oxygen chemical potential. On RuO$_2$(100) on the other hand, the films grow fully relaxed. Hence, the presented growth method allows for simultaneous access to a remarkable strain window ranging from bulk-like structures to massively strained regions.
Manipulating the strain induced poly-domains and phase transition in correlated oxide material are important for high performance devices fabrication. Though the electronic transport in the strained oxide film at macroscopic scales can be directly measured, the anisotropic electronic state and the controllable phase separation cross the insulator-to-metal transition within nanoscale size are still elusive. Here, we selected VO2 crystal film as a prototypical oxide and achieved the manipulation of anisotropy electronic phase separation via injecting He+ nanobeam into VO2 film at room temperatur…
Epitaxial strain is a proven route to enhancing the properties of complex oxides, however, the details of how the atomic structure accommodates strain are poorly understood due to the difficulty of measuring the oxygen positions in thin films. We present a general methodology for determining the atomic structure of strained oxide films via x-ray diffraction, which we demonstrate using LaNiO3 films. The oxygen octahedral rotations and distortions have been quantified by comparing the intensities of half-order Bragg peaks, arising from the two unit cell periodicity of the octahedral rotations, w…
Bulk magnetization in Pr_{0.6}Ca_{0.4}MnO_3 thin films with tensile (SrTiO_3) and compressive (LaAlO_3) substrate-induced strain is compared to the magnetooptical Kerr effect (MOKE) measurements. In the absence of an external magnetic field, in both films, a stable ferromagnetic insulating majority phase coexists with an antiferromagnetic insulating phase below ~120K. MOKE measurements indicate that at 5K a metastable ferromagnetic metallic (FM) phase is formed at the surface of the stretched film in a magnetic field below 1.1T already, while in the bulk the FM phase starts to form in the fiel…
With local density approximation + Hubbard $U$ (LDA+$U$) calculations, we show that the ferromagnetic (FM) insulating state observed in tensile-strained LaCoO$_3$ epitaxial thin films is most likely a mixture of low-spin (LS) and high-spin (HS) Co, namely, a HS/LS mixture state. Compared with other FM states, including the intermediate-spin (IS) state (\textit{metallic} within LDA+$U$), which consists of IS Co only, and the insulating IS/LS mixture state, the HS/LS state is the most favorable one. The FM order in HS/LS state is stabilized via the superexchange interactions between adjacent LS …
Germanosilicide thin films are quite different from silicides and germanides. The germanium composition is not homogeneous, grains have a different shape, and the substrate is generally strained. This affects grain boundary grooving and favors agglomeration of germanosilicide films. Our thermodynamics model shows that the equilibrium Ge composition of germanosilicide films formed on strained substrates is inhomogeneous and these films are more likely to agglomerate than those formed on relaxed substrates, in agreement with experiments. Grain shape too can affect agglomeration: polygonal films,…
Strained thin films of charge/orbital ordered (CO/OO) $Nd_{0.5}Ca_{0.5}MnO_3$ (NCMO) with various thickness have grown on (100)-SrTiO$_3$ and (100)-LaAlO$_3$ substrates, by using the Pulsed Laser Deposition (PLD) technique. The thickness of the films influences drastically the transport properties. As the thickness decreases, the CO transition increases while at the same time the insulator-to-metal transition temperature decreases under application of a 7T magnetic field. Clear relationships between the structural distortions and the transport properties are established. They are explained on …
Bulk NdNiO3 exhibits a metal-to-insulator transition (MIT) as the temperature is lowered that is also seen in tensile strained films. In contrast, films that are under a large compressive strain typically remain metallic at all temperatures. To clarify the microscopic origins of this behavior, we use position averaged convergent beam electron diffraction in scanning transmission electron microscopy to characterize strained NdNiO3 films both above and below the MIT temperature. We show that a symmetry lowering structural change takes place in case of the tensile strained film, which undergoes a…
Due to the complex interplay of magnetic, structural, electronic, and orbital degrees of freedom, biaxial strain is known to play an essential role in the doped manganites. For coherently strained La(2/3)Ca(1/3)MnO(3) thin films grown on SrTiO(3) substrates, we measured the magnetotransport properties both parallel and perpendicular to the substrate and found an anomaly of the electrical transport properties. Whereas metallic behavior is found within the plane of biaxial strain, for transport perpendicular to this plane an insulating behavior and non-linear current-voltage characteristics (IVC…
Sr3Ru2O7 belongs to the family of layered strontium ruthenates and exhibits a range of unusual emergent properties, such as electron nematic behavior and metamagnetism. Here, we show that epitaxial film strain significantly modifies these phenomena. In particular, we observe enhanced magnetic interactions and an electron nematic phase that extends to much higher temperatures and over a larger magnetic field range than in bulk single crystals. Furthermore, the films show an unusual anisotropic non-Fermi liquid behavior that is controlled by the direction of the applied magnetic field. At high m…
Epitaxial strain provides important pathways to control the magnetic and electronic states in transition metal oxides. However, the large strain is usually accompanied by a strong reduction of the oxygen vacancy formation energy, which hinders the direct manipulation of their intrinsic properties. Here using a post-deposition ozone annealing method, we obtained a series of oxygen stoichiometric SrCoO3 thin films with the tensile strain up to 3.0%. We observed a robust ferromagnetic ground state in all strained thin films, while interestingly the tensile strain triggers a distinct metal to insu…
The strain tuned magnetism of YTiO$_3$ film grown on the LaAlO$_3$ ($110$) substrate is studied by the method of the first principles, and compared with that of the ($001$)-oriented one. The obtained magnetism is totally different, which is ferromagnetic for the film on the ($110$) substrate but A-type antiferromagnetic on the ($001$) one. This orientation-dependent magnetism is attributed to the subtle orbital ordering of YTiO$_3$ film. The $d_{xz}$/$d_{yz}$-type orbital ordering is predominant for the ($001$) one, but for the ($110$) case, the $d_{xy}$ orbital is mostly occupied plus a few c…
Lattice structure can dictate electronic and magnetic properties of a material. Especially, reconstruction at a surface or heterointerface can create properties that are fundamentally different from those of the corresponding bulk material. We have investigated the lattice structure on the surface and in the thin films of epitaxial SrRuO3 with the film thickness up to 22 pseudo-cubic unit cells (u.c.), using the combination of surface sensitive low energy electron diffraction and bulk sensitive scanning transmission electron microscopy. Our analysis indicates that, in contrast to many perovski…
Multiferroics with the coexistence of ferroelectric and ferromagnetic orders are ideal candidates for magnetoelectric applications. Unfortunately, only very few ferroelectric-ferromagnetic multiferroics (with low magnetic critical temperature) were discovered. Here we perform first principles calculations to investigate the effects of the epitaxial strain on the properties of BiMnO3 films grown along the pseudocubic [001] direction. Unlike the ground state with the centrosymmetric C2/c space group in bulk, we reveal that the tensile epitaxial strain stabilizes the ferromagnetic and ferroelectr…
We performed first - principles relativistic full-potential linearized augmented plane wave calculations for strained tetragonal ferromagnetic La(Ba)MnO$_3$ with an assumed experimental structure of thin strained tetragonal La$_{0.67}$Ca$_{0.33}$MnO$_3$ (LCMO) films grown on SrTiO$_3$[001] and LaAlO$_3$[001] substrates. The calculated uniaxial magnetic anisotropy energy (MAE) values, are in good quantitative agreement with experiment for LCMO films on SrTiO$_3$ substrate. We also analyze the applicability of linear magnetoelastic theory for describing the stain dependence of MAE, and estimate …
We report a comparative study of the properties of very thin films of La0.67Ca0.33MnO3 grown epitaxially under strain on flat SrTiO3 (STO) and on 1 deg miscut STO. For the films on flat STO the transport properties show well-known behavior, namely values of the metal-insulator transition temperature which are strongly reduced with respect to the bulk value. The reduction in films on miscut STO is significantly less strong than in films on flat STO, even though they appear similar as to strain state. Moreover, the residual resistance at low temperatures is lower than for the case of flat films.…
We showed that a wetting layer in epitaxially strained thin films which decreases with increasing lattice mismatch strain arises due to the variation of nonlinear elastic free energy with film thickness. We calculated how and at what thickness a flat film becomes unstable to perturbations of varying size for films with both isotropic and anisotropic surface tension. We showed that anisotropic surface tension gives rise to a metastable enlarged wetting layer. The perturbation amplitude needed to destabilize this wetting layer decreases with increasing lattice mismatch. We also studied the early…
We study the formation and evolution of coherent islands on lattice mismatched epitaxially strained films. Faceted islands form in films with aniostropic surface tension. Under annealing, these islands ripen until a stable array is formed, with an island density which increases with film thickness. Under deposition, an island shape transition occurs, which leads to a bimodal island size distribution. In films with isotropic surface tension we observe continual ripening of islands above a certain film thickness. A stable wavy morphology is found in thinner films.
Manipulating the orbital occupation of valence electrons via epitaxial strain in an effort to induce new functional properties requires considerations of how changes in the local bonding environment affect the band structure at the Fermi level. Using synchrotron radiation to measure the x-ray linear dichroism of epitaxially strained films of the correlated oxide CaFeO3, we demonstrate that the orbital polarization of the Fe valence electrons is opposite from conventional understanding. Although the energetic ordering of the Fe 3d orbitals is confirmed by multiplet ligand field theory analysis …
We report the relationship between epitaxial strain and the crystallographic orientation of the in-phase rotation axis and A-site displacements in Pbnm-type perovskite films. Synchrotron diffraction measurements of EuFeO3 films under strain states ranging from 2% compressive to 0.9% tensile on cubic or rhombohedral substrates exhibit a combination of a-a+c- and a+a-c- rotational patterns. We compare the EuFeO3 behavior with previously reported experimental and theoretical work on strained Pbnm-type films on non-orthorhombic substrates, as well as additional measurements from LaGaO3, LaFeO3, an…
At ambient pressure, bulk SrCoO$_{3}$ is a ferromagnetic (FM) metal in cubic perovskite structure. By contrast, magnetic properties of epitaxial SrCoO$_{3}$ thin films, especially at high tensile strain ($\varepsilon \gtrsim 3$\%), remain unclear: Previous calculations had predicted antiferromagnetic (AFM) states more energetically favorable in this regime, but recent experiments indicated a FM insulating state. In this work, using first-principles calculations, we perform an extensive search for the structural, spin, magnetic, and orbital states of SrCoO$_{3}$ thin films. Our calculations ind…
Morphological properties of strained epitaxial films are examined through a mesoscopic approach developed to incorporate both the film crystalline structure and standard continuum theory. Film surface profiles and properties, such as surface energy, liquid-solid miscibility gap and interface thickness, are determined as a function of misfit strains and film elastic modulus. We analyze the stress-driven instability of film surface morphology that leads to the formation of strained islands. We find a universal scaling relationship between the island size and misfit strain which shows a crossover…
We report the temperature dependent capacitance-voltage characteristics of Pt/SrTiO3 Schottky diodes fabricated using compressively strained SrTiO3 thin films grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) substrates. The measurements reveal a divergence of the out of plane dielectric constant of SrTiO3 peaked at ~140K, implying a ferroelectric transition. A Curie-Weiss law fit to the zero-bias dielectric constant suggests a Curie temperature of ~56 K. This observation provides experimental confirmation of the theoretical prediction of out of plane ferroelectricity in compressively strained SrTiO3 …
We have investigated the magnetic-field-induced phase transition of charge-ordered (CO) Pr$_{0.5}$Ca$_{0.5}$MnO$_3$ thin films, deposited onto (100)-oriented LaAlO$_3$ and (100)-oriented SrTiO$_3$ substrates using the pulsed laser deposition technique, by measuring the transport properties with magnetic fields up to 22T. The transition to a metallic state is observed on both substrates by application of a critical magnetic field ($H_C>10T$ at 60K). The value of the field required to destroy the charge-ordered insulating state, lower than the bulk compound, depends on both the substrate and the…
While structure refinement is routinely achieved for simple bulk materials, the accurate structural determination still poses challenges for thin films due on the one hand to the small amount of material deposited on the thicker substrate and, on the other hand, to the intricate epitaxial relationships that substantially complicate standard X-ray diffraction analysis. Using a combined approach, we analyze the crystal structure of epitaxial LaVO$_3$ thin films grown on (100)-oriented SrTiO$_3$. Transmission electron microscopy study reveals that the thin films are epitaxially grown on SrTiO$_3$…
We propose a physical model which explains the existence of finite thickness wetting layers in epitaxially strained films. The finite wetting layer is shown to be stable due to the variation of the non-linear elastic free energy with film thickness. We show that anisotropic surface tension gives rise to a metastable enlarged wetting layer. The perturbation amplitude needed to destabilize this wetting layer decreases with increasing lattice mismatch. We observe the development of faceted islands in unstable films.
We have investigated the shifts of the core-level photoemission spectra of La$_{0.6}$Sr$_{0.4}$MnO$_3$ thin films grown on three kinds of substrates, SrTiO$_3$, (LaAlO$_3$)$_{0.3}$-(SrAl$_{0.5}$Ta$_{0.5}$O$_3$)$_{0.7}$, and LaAlO$_3$. The experimental shifts of the La 4d and Sr 3d core levels are almost the same as the calculation, which we attribute to the absence of covalency effects on the Madelung potentials at these atomic sites due to the nearly ionic character of these atoms. On the other hand, the experimental shifts of the O $1s$ and Mn $2p$ core levels are negligibly small, in disagr…
Strained Fe-Co films have recently been demonstrated to exhibit a large magnetocrystalline anisotropy (MCA) and thus to be of potential interest as magnetic storage material. Here, we show by means of density-functional (DF) calculations, that chemical order can remarkably enhance the MCA. We also investigate the effect of relaxation perpendicular to the applied strain and evaluate the strain energy as a function of Co concentration and substrate lattice parameter. On this basis, favourable preparation routes for films with a large perpendicular anisotropy are suggested.
PbTiO$_3$ is a simple but very important ferroelectric oxide that has been extensively studied and widely used in various technological applications. However, most previous studies and applications were based on the bulk material or the conventional [$001$]-orientated films. There are few studies on PbTiO$_3$ films grown along other crystalline axes. In this study, a first-principles calculation was performed to compute the polarization of PbTiO$_3$ films strained by SrTiO$_3$ and LaAlO$_3$ substrates. Our results show that the polarization of PbTiO$_3$ films strongly depends on the growth ori…
An equilibrium phase diagram for the shape of compressively strained free-hanging films is developed by total strain energy minimization. For small strain gradients Δε, the film wrinkles, while for sufficiently large Δε, a phase transition from wrinkling to bending occurs. We consider competing relaxation mechanisms for free-hanging films, which have rolled up into tube structures, and we provide an upper limit for the maximum achievable number of tube rotations.
Oxygen packaging in transition metal oxides determines the metal-oxygen hybridization and electronic occupation at metal orbitals. Strontium vanadate (SrVO$_3$), having a single electron in a $3d$ orbital, is thought to be the simplest example of strongly correlated metallic oxides. Here, we determine the effects of epitaxial strain on the electronic properties of SrVO$_3$ thin films, where the metal-oxide sublattice is corner-connected. Using x-ray absorption and x-ray linear dichroism at the V $L_{2,3}$ and O $K$-edges, it is observed that tensile or compressive epitaxial strain change the h…
Epitaxial CaMnO3 films grown with 2.3% tensile strain on (001)-oriented LaAlO3 substrates are found to be incipiently ferroelectric below 25 K. Optical second harmonic generation (SHG) was used for the detection of the incipient polarization. The SHG analysis reveals that CaMnO3 crystallites with in-plane orientation of the orthorhombic b axis contribute to an electric polarization oriented along the orthorhombic a (resp.\ c) axis in agreement with the predictions from density functional calculations.
Strained coherent heteroepitaxy of III-V semiconductor films such as In$_x$Ga$_{1-x}$As/GaAs has potential for electronic and optoelectronic applications such as high density logic, quantum computing architectures, laser diodes, and other optoelectronic devices. Crystal symmetry can have a large effect on the morphology of these films and their spatial order. Often the formation of group IV strained heterostructures such as Ge deposited on Si is analyzed using analytic models based on the Asaro-Tiller-Grinfeld instability. However, the governing dynamics of III-V 3D heterostructure formation h…
Effective mass anomalies due to the geometrical effects are investigated in silicon nanostructures using first-principles calculations for the first time. In \{111\} and \{110\} biaxially strained Si, it is found that longitudinal effective mass is extraordinarily enhanced for both thin films and crystals. This mass enhancement is caused by the change of the band structure with double minima into that with a single minimum due to strain and confinement. At the transition point, it is analytically shown that the effective mass diverges. The dependences of the confinement thickness on the anomal…
The structure and microstrucutre of fully-strained BiCrO3 thin films have been investigated by X-rays diffraction and transmission electron microscopy, at room temperature. Interestingly, three structural variants are simultaneously stabilized within the film. While txo of them are consistent with the existing phases in the bulk-below and above the 420 K structural transition, a different phase is identified. The existence of various structures has been attributed to the inhomogeneous distribution of local strains and oxygens resulting from a minimization of the strain-energy at the interface.…
In this work we are investigating the effect of strain in ultrathin Mn-Ga thin films on the magnetic properties at room temperature. Two different Mn-Ga compositions of which one is furthermore doped with Co were grown on Cr buffered MgO (001) substrates. Films with a thickness below 12nm are highly strained and it was observed that the ratio c/a vs. thickness is depending on composition. Using c/a as an order parameter the PMA is shown to be drastically reduced with increasing strain. These findings should be considered when generalizing and downscaling results obtained from films >20nm. Furt…
Epitaxial thin films of multiferroic perovskite BiMnO3 were synthesized on SrTiO3 substrates, and orbital ordering and magnetic properties of the thin films were investigated. The ordering of the Mn^{3+} e_g orbitals at a wave vector (1/4 1/4 1/4) was detected by Mn K-edge resonant x-ray scattering. This peculiar orbital order inherently contains magnetic frustration. While bulk BiMnO3 is known to exhibit simple ferromagnetism, the frustration enhanced by in-plane compressive strains in the films brings about cluster-glass-like properties.
The dielectric properties of NiO thin films grown by pulsed laser deposition have been studied as a function of strain at temperature from 10 to 300 K. Above 150 K, the contribution of space-charge polarization to the dielectric permittivity of NiO films becomes dominant and the more defective films, which were grown at low temperatures show a drastical increase in the dielectric constant up to room temperature. While the atomically-ordered film, which was grown at high temperature doesn't show any considerable change in the dielectric constant in the range from 10 to 300 K. Below 100 K, the e…
The direct magnetoelectric (ME) effect resulting from the polarization changes induced in a ferroelectric film by the application of a magnetic field to a ferromagnetic substrate is described using the nonlinear thermodynamic theory. It is shown that the ME response strongly depends on the initial strain state of the film. The ME polarization coefficient of the heterostructures involving Terfenol-D substrates and compressively strained lead zirconate titanate (PZT) films, which stabilize in the out-of-plane polarization state, is found to be comparable to that of bulk PZT/Terfenol-D laminate c…
A strained epitaxial film deposited on a deformable substrate undergoes a morphological instability relaxing the elastic energy by surface diffusion. The nonlinear and nonlocal dynamical equations of such films with wetting interactions are derived and solved numerically in two and three dimensions. Above some critical thickness, the surface evolves towards an array of islands separated by a wetting layer. The island chemical potential decreases with its volume, so that the system experiences a non-interrupted coarsening described by power laws with a marked dimension dependence.
Using Landau-Ginzburg-Devonshire theory and phase field modeling, we explore the complex interplay between the long-range structural order parameter (oxygen octahedron rotations) and polarization in EuxSr1-xTiO3 thin epitaxial films. In biaxially tensile strained films, we discover the presence of a low symmetry monoclinic phase with in-plane ferroelectric polarization that is stabilized by antiferrodistortive oxygen octahedra tilts. The monoclinic phase is stable in a wide temperature range, and is characterized by the large number of energetically equivalent polar and structural twin domains…
Epitaxially strained SrRuO3 films have been a model system for understanding the magnetic anisotropy in metallic oxides. In this paper, we investigate the anisotropy of the Ru 4d and O 2p electronic structure and magnetic properties using high-quality epitaxially strained (compressive and tensile) SrRuO3 films grown by machine-learning-assisted molecular beam epitaxy. The element-specific magnetic properties and the hybridization between the Ru 4d and O 2p orbitals were characterized by Ru M2,3-edge and O K-edge soft X-ray absorption spectroscopy and X-ray magnetic circular dichroism measureme…
Nonlinear evolution of three-dimensional strained islands or quantum dots in heteroepitaxial thin films is studied via a continuum elasticity model and the development of a nonlinear dynamic equation governing the film morphological profile. All three regimes of island array evolution are identified and examined, including a film instability regime at early stage, a nonlinear coarsening regime at intermediate times, and the crossover to a saturated asymptotic state, with detailed behavior depending on film-substrate misfit strains but not qualitatively on finite system sizes. The phenomenon of…
Very recently there was a report of the discovery using piezoelectric force microscopy (PFM) of a switchable ferroelectric polarization in 1.6 % tensile strained TiO2 thin film with anatase crystal structure (see N. Deepak et al. Adv. Funct. Mater. 2014, 24, 2844). The polarization disappeared only above 450 K, which was assigned as a Curie temperature, Tc. Here we have performed X-ray diffraction, second-harmonic generation (SHG) and infrared investigations of the same films. Phonon frequencies exhibit less than a 10 % shift down with the tensile strain and no anomaly near expected TC. SHG ex…
We have synthesized 20 nm thick films of tetragonally strained interstitial Fe-Co-B alloys epitaxially grown on Au55Cu45 buffer layer. The strained axis is perpendicular to the film plane and the corresponding lattice constant c is enlarged with respect to the in-plane lattice parameter a. By adding the interstitial boron with different concentrations 0, 4, and 10 at.% we were able to stabilize the tetragonal strain in 20 nm Fe-Co films with different c/a ratios of 1.013, 1.034 and 1.02, respectively. Using ferromagnetic resonance (FMR) and x-ray magnetic circular dichroism (XMCD) we found tha…
The novel strain-driven morphotropic phase boundary (MPB) in highly-strained BiFeO3 thin film is featured by ordered mixed phase nanodomains (MPNs). Through scanning probe microscopy and synchrotron X-ray diffraction, eight structural variants of the MPNs are identified. Detailed polarization configurations within the MPNs are resolved using angular-dependent piezoelectric force microscopy. Guided by the obtained results, deterministic manipulation of the MPNs has been demonstrated by controlling the motion of the local probe. These findings are important for in-depth understanding of the ultr…
We report results of large-scale molecular-dynamics (MD) simulations of dynamic deformation under biaxial tensile strain of pre-strained single-crystalline nanometer-scale-thick face-centered cubic (fcc) copper films. Our results show that stacking faults, which are abundantly present in fcc metals, may play a significant role in the dissociation, cross-slip, and eventual annihilation of dislocations in small-volume structures of fcc metals. The underlying mechanisms are mediated by interactions within and between extended dislocations that lead to annihilation of Shockley partial dislocations…
Ba(Fe1-xCox)2As2 superconducting thin films have been grown on SrTiO3, (La,Sr)(Al,Ta)O3, LaAlO3 and YAlO3 (YAO) single crystal substrates by pulsed laser deposition. All the films, except on YAO, have been grown epitaxially without buffer layers. The films deposited on YAO contained 45 degree in-plane rotated grains and showed a broad superconducting transition. The onset Tc of the films is observed to increase from 16.2 K to 24.5 K with increasing c/a, mainly due to a slight distortion of the AsFe4 tetrahedron. From this correlation, we expect that higher superconducting transition temperatur…
The field-induced polarization reversal in $c$-oriented ferroelectric phase of strained perovskite film has been studied. We show that in additional to the conventional longitudinal switching mechanism, when c-oriented polarization vector changes its modulus, the longitudinal-transversal and transversal mechanisms when the perpendicular component of polarization is dynamically admixed are possible. The later process can occurs either via the straight-abrupt or initially-continues polarization turnover scenario. We specified the obtained results for the case of PbTiO$_{3}$ and BaTiO$_{3}$ ferro…
PbZrxTi1-xO3 (PZT) is one of the technologically most important ferroelectric materials. Bulk single-domain single crystals of PZT have never been synthesized for a significant compositional range across the solid-solution phase diagram. This leaves the fundamental properties of PZT under debate. Synthesis of defect-free single crystalline films enables us to unambiguously determine the intrinsic quantities that describe ferroelectric materials, such as spontaneous polarization and dielectric constant. Defect-free single crystalline, strained PbZr0.2Ti0.8O3 thin films were grown by pulsed-lase…
BiFeO3 thin films with various thicknesses were grown epitaxially on (001) LaSrAlO4 single crystal substrates using pulsed laser deposition. High resolution x-ray diffraction measurements revealed that a tetragonal-like phase with c-lattice constant ~4.65 Å is stabilized by a large misfit strain. Besides, a rhombohedral-like phase with c-lattice constant ~3.99 Å was also detected at film thickness of ~50 nm and above to relieve large misfit strains. In-plane piezoelectric force microscopy studies showed clear signals and self-assembled nanoscale stripe domain structure for the tetragonal-like …
Magnetic anisotropies of ferromagnetic thin films are induced by epitaxial strain from the substrate via strain-induced anisotropy in the orbital magnetic moment and that in the spatial distribution of spin-polarized electrons. However, the preferential orbital occupation in ferromagnetic metallic La$_{1-x}$Sr$_x$MnO$_3$ (LSMO) thin films studied by x-ray linear dichroism (XLD) has always been found out-of-plane for both tensile and compressive epitaxial strain and hence irrespective of the magnetic anisotropy. In order to resolve this mystery, we directly probed the preferential orbital occup…
The degenerate four-wave mixing spectroscopy of uniaxially strained GaN layers is demonstrated using colinearly polarized laser pulses. The nonlinear response of FWM signal on exciton oscillator strength enhances the sensitivity for polarized exciton, allowing for mapping out the in-plane anisotropy of the strain field. The observed high-contrast spectral polarization clearly shows fine structure splittings of excitons, which are also confirmed in the change of quantum beating periods of time.
We present the temperature- and thickness-dependent structural and morphological evolution of strain induced transformations in highly-strained epitaxial BiFeO3 films deposited on LaAlO3 (001) substrates. Using high-resolution X-ray diffraction and temperature-dependent scanning-probe-based studies we observe a complex temperature- and thickness-dependent evolution of phases in this system. A thickness-dependent transformation from a single monoclinically distorted tetragonal-like phase to a complex mixed-phase structure in films with thicknesses up to ~200 nm is the consequence of a strain-in…
The mechanisms of stability or instability in the strained alloy film growth are of intense current interest to both theorists and experimentalists. We consider dislocation-free, coherent, growing alloy films which could exhibit a morphological instability without nucleation. We investigate such strained films by developing a nonequilibrium, continuum model and by performing a linear stability analysis. The couplings of film-substrate misfit strain, compositional stress, deposition rate, and growth temperature determine the stability of film morphology as well as the surface spinodal decomposi…
Quantum materials, particularly Dirac materials with linearly dispersing bands, can be effectively tuned by strain-induced lattice distortions leading to a pseudo-magnetic field that strongly modulates their electronic properties. Here, we grow kagome magnet FeSn films, consisting of alternatingly stacked Sn$_2$ honeycomb (stanene) and Fe$_3$Sn kagome layers, on SrTiO$_3$(111) substrates by molecular beam epitaxy. Using scanning tunneling microscopy/spectroscopy, we show that the Sn honeycomb layer can be periodically deformed by epitaxial strain for film thickness below 10 nm, resulting in di…
