arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1006.1179cs.AR
收藏

低功耗移位和加法乘法器设计

Low Power Shift and Add Multiplier Design

C. N. Marimuthu, P. Thangaraj, Aswathy Ramesan

摘要:

如今,每个电路都必须面对针对大电池寿命的便携式设备和避免过于复杂的冷却封装和可靠性问题的高端的电路的功耗问题。一般认为,在逻辑综合过程中,功率随面积而变化。这意味着更大的设计通常会消耗更多的功率。乘法器是数字信号处理器的重要核心。由于乘法器的电路复杂性,功耗和面积是乘法器设计的两个重要考虑因素。本文提出了一种低功耗、低面积的移位加法乘法器结构。为了得到低功耗低面积结构,对传统结构的修改包括减少乘法器的主要模块的开关活动,这包括减少加法器和计数器的开关活动。这种架构避免了乘法器寄存器的移位。对8位乘法器的仿真结果表明,与传统结构相比,该低功耗结构的总功耗降低了35.25%,面积减少了52.72%。此外,功耗的降低随着位宽的增加而增加。

英文摘要:

Today every circuit has to face the power consumption issue for both portable device aiming at large battery life and high end circuits avoiding cooling packages and reliability issues that are too complex. It is generally accepted that during logic synthesis power tracks well with area. This means that a larger design will generally consume more power. The multiplier is an important kernel of digital signal processors. Because of the circuit complexity, the power consumption and area are the two important design considerations of the multiplier. In this paper a low power low area architecture for the shift and add multiplier is proposed. For getting the low power low area architecture, the modifications made to the conventional architecture consist of the reduction in switching activities of the major blocks of the multiplier, which includes the reduction in switching activity of the adder and counter. This architecture avoids the shifting of the multiplier register. The simulation result for 8 bit multipliers shows that the proposed low power architecture lowers the total power consumption by 35.25% and area by 52.72 % when compared to the conventional architecture. Also the reduction in power consumption increases with the increase in bit width.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑