The suggestive idea of "cloaking" an electromagnetic sensor, i.e., strongly reducing its visibility (scattering) while maintaining its field-sensing (absorption) capabilities, has recently been proposed in the literature, based on scattering-cancellation, Fano-resonance, or transformation-optics approaches. In this paper, we explore an alternative, transformation-optics-based route, which relies on the recently-introduced concept of "anti-cloaking." More specifically, our proposed approach relies on a suitable tailoring of the competing cloaking and anti-cloaking mechanisms, interacting in a two-dimensional cylindrical scenario. Via analytical and parametric studies, we illustrate the underlying phenomenology, identify the critical design parameters, and address the relevant optimality and tradeoff issues, taking also into account the effect of material losses. Our results confirm the envisaged potentials of the proposed transformation-optics approach as an attractive alternative route to sensor cloaking.
We demonstrate in this letter a unique approach for watching outside while hiding in a carpet cloaking based on transformation optics. Unlike conventional carpet cloaking, which screens all the incident electromagnetic waves, we break the cloak and allow incident light get into the carpet. Hence outside information is detected inside the cloak. To recover the invisible cloaking, complementary techniques are applied in the broken space. Consequently, a hiding-inside-and-watching-outside (HIWO) carpet cloak is sewed, which works as a perfectly invisible cloaking and allows surveillance of the ou…
Electromagnetic invisible devices usually designed by transformation optics are rather complicated in material parameters and not suitable for general applications. Recently a topology optimized cloak based on level-set method was proposed to realize nearly perfect cloaking by Fujii et al [Appl. Phys. Lett. 102, 251106 (2013)]. In this work we experimentally implemented this idea and fabricated a unidirectional cloak with a relative large invisible region made of single dielectric material. Good cloaking performance was verified through measurement which consists very well with numerical simul…
By applying the interplay among the nodal points of partial waves, along with the concept of streamline in fluid dynamics for the probability flux, a quantum invisible cloak to the electron transport in a host semiconductor is demonstrated by simultaneously guiding the probability flux outside the core region and keeping the total scattering cross section negligible. As the probability flux vanishes in the interior region, one can embed any material inside a multiple core-shell sphere without affecting physical observables from the outside. Our results reveal the possibility to design a protec…
We outline a general method of constructing finite-range cloaking potentials which render a given finite-range real or complex potential $v(x)$ unidirectionally reflectionless or invisible at a wavenumber $k_0$ of our choice. We give explicit analytic expressions for three classes of cloaking potentials which achieve this goal while preserving some or all of the other scattering properties of $v(x)$. The cloaking potentials we construct are the sum of up to three constituent unidirectionally invisible potentials. We also discuss their application in making $v(x)$ bidirectionally invisible at $…
As a probe to explore the ability of invisibility cloaks to conceal objects in the quantum mechanics domain, we study the spontaneous emission rate of an excited two-level atom in the vicinity of an ideal invisibility cloaking. On this base, first, a canonical quantization scheme is presented for the electromagnetic field interacting with atomic systems in an anisotropic, inhomogeneous and absorbing magnetodielectric medium which can suitably be used for studying the influence of arbitrary invisibility cloak on the atomic radiative properties. The time dependence of the atomic subsystem is obt…
Using the idea of transformation medium, a cloak can be designed to make a domain invisible for one target frequency. In this article, we examine the possibility to extend the bandwidth of such a cloak. We obtained a constraint of the band width, which is summarized as a simple inequality that states that limits the bandwidth of operation. The constraint originates from causality requirements. We suggest a simple strategy that can get around the constraint.
In this work we theoretically propose scattering cancellation-based cloaks for heat waves that obey the Maxwell-Cattaneo equation. The proposed cloaks possess carefully tailored diffusivity to cancel the dipole scattering from the object that they surround, and thus can render a small object invisible in the near and far fields, as demonstrated by full-wave finite-element simulations. Mantle heat cloaking is further analyzed and proposed to simplify the design and bring this cloaking technology one step closer to its practical implementation, with promising applications in nanoelectronics and …
The ability to render objects invisible using a cloak - not detectable by an external observer - for concealing objects has been a tantalizing goal1-6. Here, we demonstrate a cloak operating in the near infrared at a wavelength of 1550 nm. The cloak conceals a deformation on a flat reflecting surface, under which an object can be hidden. The device has an area of 225 um2 and hides a region of 1.6 um2. It is composed of nanometre size silicon structures with spatially varying densities across the cloak. The density variation is defined using transformation optics to define the effective index d…
We report on a new concept of cloaking objects in diffusive light regime using the paradigm of the scattering cancellation and mantle cloaking techniques. We show numerically that an object can be made completely invisible to diffusive photon density waves, by tailoring the diffusivity constant of the spherical shell enclosing the object. This means that photons' flow outside the object and the cloak made of these spherical shells behaves as if the object were not present. Diffusive light invisibility may open new vistas in hiding hot spots in infrared thermography or tissue imaging.
Electromagnetic cloaks are devices that can be used to reduce the total scattering cross section of various objects. An ideal cloak removes all scattering from an object and thus makes this object "invisible" to the electromagnetic fields that impinge on the object. However, ideal cloaking appears to be possible only at a single frequency. To study cloaking from an electromagnetic pulse we consider propagation of a pulse inside a waveguide with a cloaked metal object inside. There are several ways to achieve cloaking and in this paper we study three such methods, namely, the coordinate-transfo…
An invisibility cloak that can hide an arbitrary object external to the cloak itself has not been devised before. In this Letter, we introduce a novel way to design a remote cloaking device that makes any object located at a certain distance invisible. This is accomplished using multi-folded transformation optics to remotely generate a hidden region around the object that no field can penetrate and that does not disturb the far-field scattering electromagnetic field. As a result, any object in the hidden region can stay in position or move freely within that region and remain invisible. Our id…
A new recipe for concealing objects from detection is suggested. Different with traditional cloak which deflects light around the core of the cloak to make the object inside invisible, our cloak guides the light to penetrate the core of the cloak but without striking some region of the cloak shell - the so called folded region. Full wave analytical calculation shows that this cloak will lead to a scattering enhancement instead of scattering reduction in contrast to the traditional cloak; the scattered field distribution can also be changed as if the scatterer is moved from its original positio…
A kind of transformation media, which we shall call the "anti-cloak", is proposed to partially defeat the cloaking effect of the invisibility cloak. An object with an outer shell of "anti-cloak" is visible to the outside if it is coated with the invisible cloak. Fourier-Bessel analysis confirms this finding by showing that external electromagnetic wave can penetrate into the interior of the invisibility cloak with the help of the anti-cloak.
In this paper, we proposed the GLHUA double layer cloak; proved the properties of GLHUA double layer cloak; Using GL no scattering inversion and the pre cloak condition 6.1 to 6.4 in paper [1], we create GLHUA outer layer cloak radial relative parameter and angular relative parameter theoretically. We proved theorem 4.1 to theorem 4.4 that the phase velocity of the electromagnetic wave in GLHUA outer layer cloak is less than light speed and tends to zero at the boundary $r=R_1$, the EM wave tends to zero at $r=R1$; When source $r_s > R_2$ in the outside of the cloak and observer $r_o < R_o$ in…
An elliptical invisible cloak is proposed using a coordinate transformation in the elliptical-cylindrical coordinate system, which crushes the cloaked object to a line segment instead of a point. The elliptical cloak is reduced to a nearly-circular cloak if the elliptical focus becomes very small. The advantage of the proposed invisibility cloak is that none of the parameters is singular and the changing range of all parameters is relatively small.
Invisible cloaking is one of major outcomes of the metamaterial research, but the practical potential, in particular for high frequencies (e.g., microwave to visible light), is fatally challenged by the complex material properties they usually demand. On the other hand, it will be advantageous and also technologically instrumental to design cloaking devices for applications at low frequencies where electromagnetic components are favorably uncoupled. In this work, we vastly develop the bilayer approach to create a three-dimensional magnetic cloak able to work in both static and dynamic fields. …
By investigating wave properties at cloak boundaries, invisibility cloaks with arbitrary shape constructed by general coordinate transformations are confirmed to be perfectly invisible to the external incident wave. The differences between line transformed cloaks and point transformed cloaks are discussed. The fields in the cloak medium are found analytically to be related to the fields in the original space via coordinate transformation functions. At the exterior boundary of the cloak, it is shown that no reflection is excited even though the permittivity and permeability do not always have a…
Transformation optics, a recent geometrical design strategy of controlling light by combining Maxwell's principles of electromagnetism with Einstein's general relativity, promises without precedent an invisibility cloaking device that can render a macroscopic object invisible in three dimensions. However, most previous proof-of-concept transformation-optics cloaking devices focused predominantly on two dimensions, whereas detection of a macroscopic object along its third dimension was always unfailing. Here, we report the first experimental demonstration of transformation-optics macroscopic vi…
In a recent comment arxiv:1310.1503 Miller et al. noted that a cloak we previously presented (Scientific Reports 3, 2328) that exploits a scattering cancellation technique to render an optically small dielectric particle invisible suffers from increased extinction. According to Miller et al. this disqualifies the terminology of a cloak. We concur with the crux of the comment but wish to stress that we never claimed nor suggested a reduction in extinction. A scattering cancellation cloak cancels scattering. The issue, therefore, seems to be whether the structure should be called a cloak or not.…
Ray-tracing exercise and full-wave analysis were performed to validate the performance of a new type of cloak composed of isotropic metamaterials. It is shown that objects inside the folded region of this cloak appear invisible to the incoming light from a ray tracing exercise, but exhibit magnified and shifted scattering under a plane wave illumination from a full wave analysis. Gaussian beams are introduced to resolve this interesting paradox resulted from these two methods. We show that at the time-harmonic state, small energy can be diffracted into the folded region and contribute to the r…
The coordinate transformation offers a remarkable way to design cloaks that can steer electromagnetic fields so as to prevent waves from penetrating into the {\em cloaked region} (denoted by $Ω_0$, where the objects inside are invisible to observers outside). The ideal circular and elliptic cylindrical cloaked regions are blown up from a point and a line segment, respectively, so the transformed material parameters and the corresponding coefficients of the resulted equations are highly singular at the cloaking boundary $\partial Ω_0$. The electric field or magnetic field is not continuous acro…
Using GL no scattering full wave modeling and inversion, we create a GLHUA pre cloak electromagnetic (EM) material in the virtual sphere that makes the sphere is invisible. The invisible sphere is called GLHUA sphere. In GLHUA sphere, the Pre cloak relative parameter is not less than 1; the parameters and their derivative are continuous across the boundary r=R2 and the parameters are going to infinity at origin r=0. The phase velocity of EM wave in the sphere is less than light speed and going to zero at origin. The EM wave field excited in the outside of the sphere can not be disturbed by GLH…
A simple invisible structure made of two anisotropic homogeneous layers is analyzed theoretically in temporal regime. The frequency dispersion is introduced and analytic expression of the transient part of the field is derived for large times when the structure is illuminated by a causal excitation. This expression shows that the limiting amplitude principle applies with transient fields decaying as the power -3/4 of the time. The quality of the cloak is then reduced at short times and remains preserved at large times. The one-dimensional theoretical analysis is supplemented with full-wave num…
The aim of this communication is to investigate and demonstrate the possibility to overcome the fundamental limitations of mantle cloaking for antennas by exploiting nonlinear metasurfaces. First, we recap and give additional physical insights about the fundamental bounds that apply to the electric properties of an antenna that is made invisible at its own resonance frequency. Then, an innovative strategy is proposed to circumvent these limits through the introduction of nonlinear elements that are able to dynamically transform the geometry of the cloaking metasurface depending on the power le…
Invisible cloak has long captivated the popular conjecture and attracted intensive research in various communities of wave dynamics, e.g., optics, electromagnetics, acoustics, etc. However, their inhomogeneous and extreme parameters imposed by transformation-optic method will usually require challenging realization with metamaterials, resulting in narrow bandwidth, loss, polarization-dependence, etc. On the contrary, we demonstrate that tunable thermodynamic cloak can be achieved with homogeneous and finite conductivity only employing naturally available materials. The controlled localization …
It is generally believed that transformation optics based cloaking, besides rendering the cloaked region invisible to detection by scattering of incident waves, also shields the region from those same waves. We demonstrate a coupling between the cloaked and uncloaked regions, exposing a difference between cloaking for rays and waves. Interior resonances allow this coupling to be amplified, and careful choice of parameters leads to effective cloaks with degraded shielding. As one application, we describe how to use transformation optics to hide sensors in the cloaked region and yet enable the s…
In this paper, we present an efficient spectral-element method (SEM) for solving general two-dimensional Helmholtz equations in anisotropic media, with particular applications in accurate simulation of polygonal invisibility cloaks, concentrators and circular rotators arisen from the field of transformation electromagnetics (TE). In practice, we adopt a transparent boundary condition (TBC) characterized by the Dirichlet-to-Neumann (DtN) map to reduce wave propagation in an unbounded domain to a bounded domain. We then introduce a semi-analytic technique to integrate the global TBC with local c…
We introduce a solid material that is itself invisible, possessing identical electromagnetic properties as air (i.e. not a cloak) at a desired frequency. Such a material could provide improved mechanical stability, electrical conduction and heat dissipation to a system, without disturbing incident electromagnetic radiation. One immediate application would be towards perfect antenna radomes. Unlike cloaks, such a transparent and self-invisible material has yet to be demonstrated. Previous research has shown that a single sphere or cylinder coated with plasmonic or dielectric layers can have a d…
Concealing objects by making them invisible to an external electromagnetic probe is coined by the term cloaking. Cloaking devices, having numerous potential applications, are still face challenges in realization, especially in the visible spectral range. In particular, inherent losses and extreme parameters of metamaterials required for the cloak implementation are the limiting factors. Here, we numerically demonstrate nearly perfect suppression of scattering from arbitrary shaped objects in spatially dispersive metamaterial acting as an alignment-free concealing cover. We consider a realizati…
We describe families of potentials which act as approximate cloaks for matter waves, i.e., for solutions of the time-independent Schrödinger equation at energy $E$, with applications to the design of ion traps. These are derived from perfect cloaks for the conductivity and Helmholtz equations, by a procedure we refer to as isotropic transformation optics. If $W$ is a potential which is surrounded by a sequence $\{V_n^E\}_{n=1}^\infty$ of approximate cloaks, then for generic $E$, asymptotically in $n$ (i) $W$ is both undetectable and unaltered by matter waves originating externally to the cloak…
Light emitters are bound to strongly interact with light through enhanced absorption and scattering, which imposes limitations on the design and performance of photonic devices such as solar cells, nanoantennas, and (nano) lasers. Overcoming these limitations forces the use of ineffective nonreciprocity approaches or separation of radiation and scattering in the frequency or time domain. A design that combines the properties of an efficient emitter in one state and the property of being invisible in another state is vital for various applications. In this work, we propose a nanolaser design ba…
The advent of transformation optics and metamaterials has made possible devices producing extreme effects on wave propagation. Here we give theoretical designs for devices, Schrödinger hats, acting as invisible concentrators of waves. These exist for any wave phenomenon modeled by either the Helmholtz or Schrödinger equations, e.g., polarized waves in EM, pressure waves in acoustics and matter waves in QM, and occupy one part of a parameter space continuum of wave-manipulating structures which also contains standard transformation optics based cloaks, resonant cloaks and cloaked sensors. For E…
Conformal transformation optics provides a simple scheme for manipulating light rays with inhomogeneous isotropic dielectrics. However, there is usually discontinuity for refractive index profile at branch cuts of different virtual Riemann sheets, hence compromising the functionalities. To deal with that, we present a special method for conformal transformation optics based on the concept of geodesic lens. The requirement is a continuous refractive index profile of dielectrics, which shows almost perfect performance of designed devices. We demonstrate such a proposal by achieving conformal tra…
A phase diagram, defined by the amplitude square and phase of scattering coefficients for absorption cross-section in each individual channel, is introduced as a universal map on the electromagnetic properties for passive scatterers. General physical bounds are naturally revealed based on the intrinsic power conservation in a passive scattering system, entailing power competitions among scattering, absorption, and extinction. Exotic scattering and absorption phenomena, from resonant scattering, invisible cloaking, coherent perfect absorber, and subwavelength superscattering can all be illustra…
We consider reshaping a scattering obstacle virtually by using transformation optics in acoustic and electromagnetic scattering. Among the general virtual reshaping results, the virtual minification and virtual magnification are particularly studied. Stability estimates are derived for scattering amplitude in terms of the diameter of a small obstacle, which implies that the limiting case for minification corresponds to a perfect cloaking, i.e., the obstacle is invisible to detection.
Breaking the trade-off between invisibility and sensitivity in electromagnetic sensing
Key Lab of Advanced Transducers and Intelligent Control System, Ministry of Education and Shanxi Province, College of Physics and Optoelectronics, Taiyuan University of Technology（太原理工学院物理与光电工程学院）
