An elliptical invisible cloak is proposed using a coordinate transformation in the elliptical-cylindrical coordinate system, which crushes the cloaked object to a line segment instead of a point. The elliptical cloak is reduced to a nearly-circular cloak if the elliptical focus becomes very small. The advantage of the proposed invisibility cloak is that none of the parameters is singular and the changing range of all parameters is relatively small.
Based on the concept of complementary media, we propose an invisibility cloak operating at a finite frequency that can cloak an object with a pre-specified shape and size within a certain distance outside the shell. The cloak comprises of a dielectric core, and an "anti-object" embedded inside a negative index shell. The cloaked object is not blinded by the cloaking shell since it lies outside the cloak. Full-wave simulations in two dimensions have been performed to verify the cloaking effect.
Invisibility cloaks of light, which used to be confined to the imagination, have now been turned into a scientific reality, thanks to the enabling theoretical tools of transformation optics and conformal mapping. Inspired by those theoretical works, the experimental realisation of electromagnetic invisibility cloaks has been reported at various electromagnetic frequencies. All the invisibility cloaks demonstrated thus far, however, have relied on nano- or micro-fabricated artificial composite materials with spatially varying electromagnetic properties, which limit the size of the cloaked regio…
A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, due to the slow convergence of the zero$^{th}$ order scattering coefficients, a tiny perturbation on the cloak would ind…
Conventional cloaking based on Euclidean transformation optics requires that the speed of light should tend to infinity on the inner surface of the cloak. Non-Euclidean cloaking still needed media with superluminal propagation. Here we show by giving an example that this is no longer necessary.
Very recently Farhat et al. [1] have suggested that arrays of invisibility cloaks may find important applications in low-interference communication, noninvasive probing, sensing and communication networks, etc. We report on the first experimental realization of such an array of broadband invisibility cloaks, which operates in the visible frequency range. Wavelength and angular dependencies of the cloak array performance have been studied.
We outline a general method of constructing finite-range cloaking potentials which render a given finite-range real or complex potential $v(x)$ unidirectionally reflectionless or invisible at a wavenumber $k_0$ of our choice. We give explicit analytic expressions for three classes of cloaking potentials which achieve this goal while preserving some or all of the other scattering properties of $v(x)$. The cloaking potentials we construct are the sum of up to three constituent unidirectionally invisible potentials. We also discuss their application in making $v(x)$ bidirectionally invisible at $…
An elliptic cylindrical wave expansion method by using Mathieu functions is developed to obtain the scattering field for a two-dimensional elliptic cylindrical invisibility cloak. The cloak material parameters are obtained from the spatial transformation approach. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary in the cloak shell. The proposed design provides a more practical cloak geometry when compared to previous designs of elliptic cylindrical cloaks.
Carpet or ground-plane invisibility cloaks hide an object in reflection and inhibit transmission by construction. This concept has significantly reduced the otherwise demanding material requirements and has hence enabled various experimental demonstrations. In contrast, free-space invisibility cloaks should work in both reflection and transmission. The fabrication of omnidirectional three-dimensional free-space cloaks still poses significant challenges. Recently, the idea of the carpet cloak has been carried over to experiments on unidirectional free-space invisibility cloaks that only work pe…
In this paper, we use the parameter retrieval method together with an analytical effective medium approach to design a well-performed invisible cloak, which is based on an empirical revised version of the reduced cloak. The designed cloak can be implemented by silver nanowires with elliptical cross-sections embedded in a polymethyl methacrylate host. This cloak is numerically proved to be robust for both the inner hidden object as well as incoming detecting waves, and is much simpler thus easier to manufacture when compared with the earlier proposed one [Nat. Photon. 1, 224 (2007)].
A near-perfect, non-singular cylindrical invisibility cloak with diamond cross section is achieved by a two-step coordinate transformation. A small line segment is stretched and then blown up into a diamond space, and finally the cloak consisting of four kinds and eight blocks of homogeneous transformation media is obtained. Numerical simulations confirm the well performance of the cloak. The operation bandwidth of the cloak is also investigated. Our scheme is promising to create a simple and well-performed cloak in practice.
We propose one kind of transformation functions for nonmagnetic invisibility cloak with minimized scattering on the basis of generalized transformation. By matching the impedance at the outer surface of the cloak, the transformations with two parameters are determined. To confirm the performance of the cloak, full wave simulation based on the finite element method is carried out. Furthermore, total scattering cross section is computed to better illustrate the scattering characteristics of cloak with different parameters. In addition, based on the effective media theory, alternating layered sys…
An analytical method of electromagnetic wave interactions with a general radially anisotropic cloak is established. It is able to deal with arbitrary parameters ($ε_r(r)$, $μ_r(r)$, $ε_t(r)$ and $μ_t(r)$) of a radially anisotropic inhomogeneous shell. The general cloaking condition is proposed from the wave relations for the first time. We derive the parameters of a novel class of spherical nonlinear cloaks and examine its invisibility performance by the proposed method at various nonlinear situations. Spherical metamaterial cloaks with improved invisibility performance is achieved with optima…
We develop and apply an optimization method to design invisibility cloaks. Our method is based on minimizing the forward scattering amplitude of the cloaked object, which by the optical theorem, is equivalent to the total cross section. The use of the optical theorem circumvents the need to evaluate and integrate the scattering amplitude over angle at each iteration, and thus provides a simpler, more computationally efficient objective function for optimizing structures. We implement the approach using gradient descent optimization and present several gradient-permittivity cloaks that reduce s…
It was recently shown [Halimeh et al. arXiv:1510.06144 (to appear in Phys. Rev. A)] that as a result of the Doppler effect, inherently dispersive single-frequency ideal free-space invisibility cloaks in relative motion to an observer can only cloak light whose frequency in the cloak frame coincides with the operational frequency of the cloak, although an infinite number of such rays exist for any cloak motion. In this article, we show analytically and through ray-tracing simulations that even though this relationship can be relaxed by simplifying the ideal invisibility cloak into a broadband a…
The electromagnetic characteristics of plane-transformed invisibility cloaks are quantitatively studied in this paper. We take elliptical cylindrical cloak as the example, and use an elliptical cylindrical wave expansion method to obtain the scattered field. It is demonstrated that an ideal elliptical cylindrical cloak is inherently visible. Noticeable field scattering and penetration will be induced when the cloak is exposed directly to an electromagnetic wave. However, as long as the cloak consists of a perfect electric conducting lining at the interior surface, perfect invisibility can stil…
We investigate the scattering of 2D cylindrical invisibility cloaks with simplified constitutive parameters with the assistance of scattering coefficients. We show that the scattering of the cloaks originates not only from the boundary conditions but also from the spatial variation of the component of permittivity/permeability. According to our formulation, we propose some restrictions to the invisibility cloak in order to minimize its scattering after the simplification has taken place. With our theoretical analysis, it is possible to design a simplified cloak by using some peculiar composite…
Invisibility cloak is drawing much attention due to its special camouflage when exposed to physical field varing from wave (electromagnetic field, acoustic field, elastic wave, etc.) to scalar field (thermal field, static magnetic field, dc electric field and mass diffusion). Here, an electrostatic field invisibility cloak has been theoretically investigated, and experimentally demonstrated for the first time to perfectly hide a certain region from sight without disturbing the external electrostatic field. The desired cloaking effect has been achieved via both scattering cancelling technology …
Recently, invisible cloaks have attracted much attention due to their exciting property of invisibility, which are based on a solid theory of transformation optics and quasi-conformal mapping. Two kinds of cloaks have been proposed: free-space cloaks, which can render objects in free space invisible to incident radiation, and carpet cloaks (or ground cloaks), which can hide objects under the conducting ground. The first free-space and carpet cloaks were realized in the microwave frequencies using metamaterials. The free-space cloak was composed of resonant metamaterials, and hence had restrict…
Invisibility cloaks, a subject that usually occurs in science fiction and myths, have attracted wide interest recently because of their possible realization. The biggest challenge to true invisibility is known to be the cloaking of a macroscopic object in the broad range of wavelengths visible to the human eye. Here we experimentally solve this problem by incorporating the principle of transformation optics into a conventional optical lens fabrication with low-cost materials and simple manufacturing techniques. A transparent cloak made of two pieces of calcite is created. This cloak is able to…
It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination (Pendry et al., Science 312, p. 1780). The cylindrical cloaks experimentally demonstrated (Schurig et al., Science 314, p. 997) and proposed (Cai et al., Nat. Photon. 1, p. 224) have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if th…
As a probe to explore the ability of invisibility cloaks to conceal objects in the quantum mechanics domain, we study the spontaneous emission rate of an excited two-level atom in the vicinity of an ideal invisibility cloaking. On this base, first, a canonical quantization scheme is presented for the electromagnetic field interacting with atomic systems in an anisotropic, inhomogeneous and absorbing magnetodielectric medium which can suitably be used for studying the influence of arbitrary invisibility cloak on the atomic radiative properties. The time dependence of the atomic subsystem is obt…
The method of coordinate transformation offers a way to realize perfect cloaks, but provides less ability to characterize the performance of a multilayered cloak in practice. Here, we propose an analytical model to predict the performance of a multilayered cylindrical cloak, based on which, the cloak in practice can be optimized to diminish the intrinsic scatterings caused by discretization and simplification. Extremely low scattering or "quasi-perfect invisibility" can be achieved with only a few layers of anisotropic metamaterials without following the transformation method. Meanwhile, the p…
We consider an ideal invisibility cloak which is illuminated by monochromatic light and which moves in vacuum at constant relativistic velocity with respect to the common inertial frame of light source and observer. We show that, in general, the moving cloak becomes detectable by image distortions and by generating a broad frequency spectrum of the scattered light. However, for many special combinations of incident light frequency, wave vector of light, and cloak velocity, ideal cloaking remains possible. It becomes non-reciprocal though. This means that light rays emitted by the light source …
The electromagnetic field solution for a spherical invisibility cloak with an active device inside is established. Extraordinary electric and magnetic surface voltages are induced at the inner boundary of a spherical cloak, which prevent electromagnetic waves from going out. The phase and handness of polarized waves obliquely incident on such boundaries is kept in the reflected waves. The surface voltages due to an electric dipole inside the concealed region are found equal to the auxiliary scalar potentials at the inner boundary, which consequently gain physical counterparts in this case.
As invisibility cloaking has recently become experimental reality, it is interesting to explore ways to reveal remaining imperfections. In essence, the idea of most invisibility cloaks is to recover the optical path lengths without an object (to be made invisible) by a suitable arrangement around that object. Optical path length is proportional to the time of flight of a light ray or to the optical phase accumulated by a light wave. Thus, time-of-flight images provide a direct and intuitive tool for probing imperfections. Indeed, recent phase-sensitive experiments on the carpet cloak have alre…
Using the idea of transformation medium, a cloak can be designed to make a domain invisible for one target frequency. In this article, we examine the possibility to extend the bandwidth of such a cloak. We obtained a constraint of the band width, which is summarized as a simple inequality that states that limits the bandwidth of operation. The constraint originates from causality requirements. We suggest a simple strategy that can get around the constraint.
We demonstrate in this letter a unique approach for watching outside while hiding in a carpet cloaking based on transformation optics. Unlike conventional carpet cloaking, which screens all the incident electromagnetic waves, we break the cloak and allow incident light get into the carpet. Hence outside information is detected inside the cloak. To recover the invisible cloaking, complementary techniques are applied in the broken space. Consequently, a hiding-inside-and-watching-outside (HIWO) carpet cloak is sewed, which works as a perfectly invisible cloaking and allows surveillance of the ou…
Transformation optics (TO) is a powerful tool for the design of artiffcial materials with unprecedented optical properties. Here, we propose the approximation of TO structures of arbitrary shape by faceting, in which curved surfaces are approximated by at metamaterial layers that can be implemented by standard fabrication and stacking techniques. We illustrate the approximation approach for the specific example of a cylindrical invisibility cloak. First, we introduce a numerical method for the design of cloaks with arbitrary boundary shapes, and apply it to faceted shapes. Subsequently, we red…
The effect of electrostatic shielding for a spherical invisibility cloak with arbitrary charges inside is investigated. Our result reveals that the charge inside the cloak is a crucial factor to determine the detection. When charged bodies are placed inside the cloak with an arbitrary distribution, the electric fields outside are purely determined by the total charges just as the fields of a point charge at the center of the cloak. As the total charges reduce to zero, the bodies can not be detected. On the other hand, if the total charges are nonzero, the electrostatic potential inside an idea…
We investigate two-dimensional invisibility cloaking via transformation optics approach. The cloaking media possess much more singular parameters than those having been considered for three-dimensional cloaking in literature. Finite energy solutions for these cloaking devices are studied in appropriate weighted Sobolev spaces. We derive some crucial properties of the singularly weighted Sobolev spaces. The invisibility cloaking is then justified by decoupling the underlying singular PDEs into one problem in the cloaked region and the other one in the cloaking layer. We derive some completely n…
The prospect of rendering objects invisible has intrigued researchers for centuries. Transformation optics based invisibility cloak design is now bringing this goal from science fictions to reality and has already been demonstrated experimentally in microwave and optical frequencies. However, the majority of the invisibility cloaks reported so far have a spatially varying refractive index which requires complicated design processes. Besides, the size of the hidden object is usually small relative to that of the cloak device. Here we report the experimental realization of a homogenous invisibil…
By investigating wave properties at cloak boundaries, invisibility cloaks with arbitrary shape constructed by general coordinate transformations are confirmed to be perfectly invisible to the external incident wave. The differences between line transformed cloaks and point transformed cloaks are discussed. The fields in the cloak medium are found analytically to be related to the fields in the original space via coordinate transformation functions. At the exterior boundary of the cloak, it is shown that no reflection is excited even though the permittivity and permeability do not always have a…
Invisibility cloak capable of hiding an object can be achieved by properly manipulating electromagnetic field. Such a remarkable ability has been shown in transformation and ray optics. Alternatively, it may be realistic to create a spatial cloak by means of confining electromagnetic field in three-dimensional arrayed waveguides and introducing appropriate collective curvature surrounding an object. We realize the artificial structure in borosilicate by femtosecond laser direct writing, where we prototype up to 5000 waveguides to conceal millimeter-scale volume. We characterize the performance…
In this paper, we review the methodology of transformation optics, which can construct invisibility cloak through the transformation of coordinates based on the form invariance of Maxwell's equations. Three different ways to define the components of electromagnetic fields are compared for removing some ambiguities. The analytical expressions of light-ray and wave-normal ray are derived in spherical and cylindrical ideal invisibility cloaks created with any continuous radial transformation functions, and their physical interpretation is also given. Using the duality principle in anisotropic med…
The invisibility cloak has been a long-standing dream for many researchers over the decades. The introduction of transformational optics has revitalized this field by providing a general method to design material distributions to hide the subject from detection. By transforming space and light propagation, a three-dimensional (3D) object is perceived as having a reduced number of dimensions, in the form of points, lines, and thin sheets, making it "undetectable" judging from the scattered field. Although a variety of cloaking devices have been reported at microwave and optical frequencies, the…
The concept of an invisibility cloak is a fixture of science fiction, fantasy, and the collective imagination. However, a real device that could hide an object from sight in visible light from absolutely any viewpoint would be extremely challenging to build. The main obstacle to creating such a cloak is the coupling of the electromagnetic components of light, which would necessitate the use of complex materials with specific permittivity and permeability tensors. Previous cloaking solutions have involved circumventing this obstacle by functioning either in static (or quasi-static) fields where…
Coordinate-transformation approaches to invisibility cloaking rely on the design of an anisotropic, spatially inhomogeneous "transformation medium" capable of suitably re-routing the energy flux around the region to conceal without causing any scattering in the exterior region. It is well known that the inherently magnetic properties of such medium limit the high-frequency scaling of practical "metamaterial" implementations based on subwavelength inclusions (e.g., split-ring resonators). Thus, for the optical range, non-magnetic implementations, based on approximate reductions of the constitut…
Based on the concept of the cloak generating function, we propose a numerical method to compute the invisibility performance of various quadratic spherical cloaks and obtain optimal invisibility results. A non-ideal discrete model is used to calculate and optimize the total scattering cross-sections of different profiles of the generating function. A bell-shaped quadratic spherical cloak is found to be the best candidate, which is further optimized by controlling design parameters involved. Such improved invisibility is steady even when the model is highly discretized.
The design rules of transformation optics generally lead to spatially inhomogeneous and anisotropic impedance-matched magneto-dielectric material distributions for, e.g., free-space invisibility cloaks. Recently, simplified anisotropic non-magnetic free-space cloaks made of a locally uniaxial dielectric material (calcite) have been realized experimentally. In a two-dimensional setting and for in-plane polarized light propagating in this plane, the cloaking performance can still be perfect for light rays. However, for general views in three dimensions, various imperfections are expected. In thi…
Transformation optics (TO) has recently become a useful methodology in the design of unusual optical devices, such as novel metamaterial lenses and invisibility cloaks. Very recently Danner et al. [1] have suggested theoretical extension of this approach to birefrigent TO devices, which perform useful and different functions for mutually orthogonal polarization states of light. Theoretical designs which operate as invisibility cloak for one polarization while behaving as a Luneburg lens for another orthogonal polarization have been suggested. Here we report the first experimental realization o…
There is currently a great deal of interest in the invisibility cloaks recently proposed by Pendry et al. that are based in the transformation approach. They obtained their results using first order transformations. In recent papers Hendi et al. and Cai et al. considered invisibility cloaks with high order transformations. In this paper we study high order electromagnetic invisibility cloaks in transformation media obtained by high order transformations from general anisotropic media. We consider the case where there is a finite number of spherical cloaks located in different points in space. …
Invisibility cloaking not only catches the human imagination, but also promises fascinating applications in optics and photonics. By manipulating electromagnetic waves with metamaterials, researchers have been able to realize electromagnetic cloaking in the microwave, terahertz and optical regimes. Nevertheless, the complex design and fabrication process, narrow bandwidth, and high intrinsic losses in the metamaterial-based cloaks have imposed intractable limitations on their realistic applications. Seeking new approaches to overcome these perceived disadvantages is in progress. Here by using …
In order to reduce the difficulties in the experimental realizations of the cloak but still keep good performance of invisibility, we proposed a perfect cylindrical invisibility cloak with spatially invariant axial material parameters. The advantage of this kind of TE (or TM) cloak is that only rho and phi components of mu (or epsilon) are spatially variant, which makes it possible to realize perfect invisibility with two-dimensional (2D) magnetic (or electric) metamaterials. The effects of perturbations of the parameters on the performance of this cloak are quantitatively analyzed by scatteri…
Is it possible to actually make Harry's invisibility cloaks? The most promising approach for realizing such magical cloaking in our real world would be to use transformation optics, where an empty space with a distorted geometry is imitated with a non-distorted space but filled with transformation medium having appropriate permittivity and permeability. An important requirement for true invisibility cloaks is nonreciprocity; that is, a person in the cloak should not be seen from the outside but should be able to see the outside. This invisibility cloak, or a nonreciprocal shield, cannot be cre…
We present the design, fabrication and performance test of a quasi three-dimensional carpet cloak made of normal dielectric in the microwave regime. Taking advantage of a simple linear coordinate transformation we design a carpet cloak with homogeneous anisotropic medium and then practically realize the device with multilayer of alternating normal dielectric slabs based on the effective medium theory. As a proof-of-concept example, we fabricate the carpet cloak with multilayer of FR4 dielectric slabs with air spacing. The performance of the fabricated design is verified through full-wave numer…
We show that it is possible to design an invisible wavelength-sized metal-dielectric metamaterial object without evoking cloaking. Our approach is an extension of the neutral inclusion concept by Zhou and Hu [Phys.Rev.E 74, 026607 (2006)] to Mie scatterers. We demonstrate that an increase of metal fraction in the metamaterial leads to a transition from dielectric-like to metal-like scattering, which proceeds through invisibility or optical neutrality of the scatterer. Formally this is due to cancellation of multiple scattering orders, similarly to plasmonic cloaking introduced by Alu and Enghe…
In this paper we study point transformed electromagnetic invisibility cloaks in transformation media that are obtained by transformation from general anisotropic media. We assume that there are several cloaks located in different points in space. Our results apply in particular to the first order invisibility cloaks introduced by Pendry et al. and to the high order invisibility cloaks introduced by Hendi et al. and by Cai et al.. We identify the appropriate {\it cloaking boundary conditions} that the solutions of Maxwell equations have to satisfy at the outside, $\partial K_+$, and at the insi…
We employ the analytical results for the spatial transformation of the electromagnetic fields to obtain and analyze explicit expressions for the structure of the electromagnetic fields in invisibility cloaks, beam splitters, and field concentrators. We study the efficiency of nonideal electromagnetic cloaks and discuss the effect of scattering losses on the cloak invisibility.
The coordinate transformation offers a remarkable way to design cloaks that can steer electromagnetic fields so as to prevent waves from penetrating into the {\em cloaked region} (denoted by $Ω_0$, where the objects inside are invisible to observers outside). The ideal circular and elliptic cylindrical cloaked regions are blown up from a point and a line segment, respectively, so the transformed material parameters and the corresponding coefficients of the resulted equations are highly singular at the cloaking boundary $\partial Ω_0$. The electric field or magnetic field is not continuous acro…
A kind of transformation media, which we shall call the "anti-cloak", is proposed to partially defeat the cloaking effect of the invisibility cloak. An object with an outer shell of "anti-cloak" is visible to the outside if it is coated with the invisible cloak. Fourier-Bessel analysis confirms this finding by showing that external electromagnetic wave can penetrate into the interior of the invisibility cloak with the help of the anti-cloak.
Invisibility or cloaking has captured human's imagination for many years. With the recent advancement of metamaterials, several theoretical proposals show cloaking of objects is possible, however, so far there is a lack of an experimental demonstration at optical frequencies. Here, we report the first experimental realization of a dielectric optical cloak. The cloak is designed using quasi-conformal mapping to conceal an object that is placed under a curved reflecting surface which imitates the reflection of a flat surface. Our cloak consists only of isotropic dielectric materials which enable…
We investigate a general class of electromagnetic devices created with any continuous transformation functions by rigorously calculating the analytical expressions of the electromagnetic field in the whole space. Some interesting phenomena associated with these transformation devices, including the invisibility cloaks, concentrators, and field rotators, are discussed. By carefully choosing the transformation function, we can realize cloaks which are insensitive to perturbations at both the inner and outer boundaries. Furthermore, we find that when the coating layer of the concentrator is reali…
Transformation optics, a recent geometrical design strategy of controlling light by combining Maxwell's principles of electromagnetism with Einstein's general relativity, promises without precedent an invisibility cloaking device that can render a macroscopic object invisible in three dimensions. However, most previous proof-of-concept transformation-optics cloaking devices focused predominantly on two dimensions, whereas detection of a macroscopic object along its third dimension was always unfailing. Here, we report the first experimental demonstration of transformation-optics macroscopic vi…
We derive the expression for the anisotropic heterogeneous matrices of permittivity and permeability associated with two-dimensional polygonal and star shaped cloaks. We numerically show using finite elements that the forward scattering worsens when we increase the number of sides in the latter cloaks, whereas it improves for the former ones. This antagonistic behavior is discussed using a rigorous asymptotic approach. We use a symmetry group theoretical approach to derive the cloaks design.
Two novel classes of spherical invisibility cloaks based on nonlinear transformation have been studied. The cloaking characteristics are presented by segmenting the nonlinear transformation based spherical cloak into concentric isotropic homogeneous coatings. Detailed investigations of the optimal discretization (e.g., thickness control of each layer, nonlinear factor, etc.) are presented for both linear and nonlinear spherical cloaks and their effects on invisibility performance are also discussed. The cloaking properties and our choice of optimal segmentation are verified by the numerical si…
The intriguing concept of "anti-cloaking" has been recently introduced within the framework of transformation optics (TO), first as a "countermeasure" to invisibility-cloaking (i.e., to restore the scattering response of a cloaked target), and more recently in connection with "sensor invisibility" (i.e., to strongly reduce the scattering response while maintaining the field-sensing capabilities). In this paper, we extend our previous studies, which were limited to a two-dimensional cylindrical scenario, to the three-dimensional spherical case. More specifically, via a generalized (coordinate-m…
In this paper, we present an efficient spectral-element method (SEM) for solving general two-dimensional Helmholtz equations in anisotropic media, with particular applications in accurate simulation of polygonal invisibility cloaks, concentrators and circular rotators arisen from the field of transformation electromagnetics (TE). In practice, we adopt a transparent boundary condition (TBC) characterized by the Dirichlet-to-Neumann (DtN) map to reduce wave propagation in an unbounded domain to a bounded domain. We then introduce a semi-analytic technique to integrate the global TBC with local c…
There is currently a great deal of interest in the theoretical and practical possibility of cloaking objects from the observation by electromagnetic waves. The basic idea of these invisibility devices \cite{glu1, glu2, le},\cite{pss1} is to use anisotropic {\it transformation media} whose permittivity and permeability $\var^{λν}, μ^{λν}$, are obtained from the ones, $\var_0^{λν}, μ^{λν}_0$, of isotropic media, by singular transformations of coordinates. In this paper we study electromagnetic cloaking in the time-domain using the formalism of time-dependent scattering theory. This formalism all…
