Artem R. Oganov, Jiuhua Chen, Carlo Gatti, Yanzhang Ma, Yanming Ma, Colin W. Glass, Zhenxian Liu, Tony Yu, Oleksandr O. Kurakevych, Vladimir L. Solozhenko
Boron is an element of fascinating chemical complexity. Controversies have shrouded this element since its discovery was announced in 1808: the new 'element' turned out to be a compound containing less than 60-70 percent of boron, and it was not until 1909 that 99-percent pure boron was obtained. And although we now know of at least 16 polymorphs, the stable phase of boron is not yet experimentally established even at ambient conditions. Boron's complexities arise from frustration: situated between metals and insulators in the periodic table, boron has only three valence electrons, which would favour metallicity, but they are sufficiently localized that insulating states emerge. However, this subtle balance between metallic and insulating states is easily shifted by pressure, temperature and impurities. Here we report the results of high-pressure experiments and ab initio evolutionary crystal structure predictions that explore the structural stability of boron under pressure and, strikingly, reveal a partially ionic high-pressure boron phase. This new phase is stable between 19 and 89 GPa, can be quenched to ambient conditions, and has a hitherto unknown structure (space group Pnnm, 28 atoms in the unit cell) consisting of icosahedral B12 clusters and B2 pairs in a NaCl-type arrangement. We find that the ionicity of the phase affects its electronic bandgap, infrared adsorption and dielectric constants, and that it arises from the different electronic properties of the B2 pairs and B12 clusters and the resultant charge transfer between them.
The allotropes of boron continue to challenge structural elucidation and solid-state theory. Here we use machine learning combined with random structure searching (RSS) algorithms to systematically construct an interatomic potential for boron. Starting from ensembles of randomized atomic configurations, we use alternating single-point quantum-mechanical energy and force computations, Gaussian approximation potential (GAP) fitting, and GAP-driven RSS to iteratively generate a representation of the element's potential-energy surface. Beyond the total energies of the very different boron allotrop…
The comment of Dubrovinskaia et al. is scientifically flawed. The high-pressure form of boron, discovered by Oganov et al., is indeed new and its bonding has a significant ionic character, as demonstrated in Ref. 1.
The crystal structure of boron is unique among chemical elements, highly complex, and imperfectly known. Experimentalists report the beta-rhombohedral (black) form is stable over all temperatures from absolute zero to melting. However, early calculations found its energy to be greater than the energy of the alpha-rhombohedral (red) form, implying beta cannot be stable at low temperatures. Furthermore, beta exhibits partially occupied sites, seemingly in conflict with the thermodynamic requirement that entropy vanish at low temperature. Using electronic density functional theory methods and an …
The structure of amorphous materials has been debated since the 1930's as a binary question: amorphous materials are either Zachariasen continuous random networks (Z-CRNs) or Z-CRNs containing crystallites. It was recently demonstrated, however, that amorphous diamond can be synthesized in either form. Here we address the question of the structure of single-atom-thick amorphous monolayers. We reanalyze the results of prior simulations for amorphous graphene and report kinetic Monte Carlo simulations based on alternative algorithms. We find that crystallite-containing Z-CRN is the favored struc…
Oganov et al report a discovery of an ionic high-pressure /hitherto unknown phase of boron/. We show that this phase has been known since 1965, and it is a covalent material.
Non-equilibrium synthesis methods allow to alloy bulk-immiscible elements into multinary nanoparticles, which broadens the design space for new materials. Whereas sputtering onto solid substrates can combine immiscible elements into thin film solid solutions, this is not clear for sputtering of nanoparticles in ionic liquids. Thus, the suitability of sputtering in ionic liquids for producing nanoparticles of immiscible elements is investigated by co-sputtering the systems Au-Cu (miscible), Au-Ru and Cu-Ru (both immiscible), and Au-Cu-Ru on the surface of the ionic liquid 1-butyl-3-methylimidaz…
Two boron-rich chalcogenides B12S and B12Se isostructural to α-rhombohedral boron were synthesized by chemical reaction of the elements at high-pressure - high-temperature conditions. The crystal structures and stoichiometries of both compounds were confirmed by Rietveld refinement and elemental analysis. The experimental Raman spectra of B12S and B12Se were investigated for the first time. All observed Raman bands have been attributed to the theoretically calculated phonon modes, and the mode assignment has been performed.
General purpose graphical processing units (GPU's) offer high processing speeds for certain classes of highly parallelizable computations, such as matrix operations and Fourier transforms, that lie at the heart of first-principles electronic structure calculations. Inclusion of exact-exchange increases the cost of density functional theory by orders of magnitude, motivating the use of GPU's. Porting the widely used electronic density functional code VASP to run on a GPU results in a 5-20 fold performance boost of exact-exchange compared with a traditional CPU. We analyze performance bottleneck…
Boron nitride (BN) has been explored these days because of its extraordinary optical, chemical and mechanical properties. BN is sensitive to its crystal structure that slight change in lattice parameters enormously change its properties. Present study deals with synthesis, characterization as well as photocatalytic applications of BN-based composite. When boron nitride was mixed with SnO2 having tetragonal crystal structure, dissociation into smaller sheets occurred and the material oriented to (102) plane. SnO2 particles attached both sides of BN sheets provided high surface area which make t…
It has been widely accepted that planar boron structures, composed of triangular and hexagonal motifs are the most stable two dimensional (2D) phases and likely precursors for boron nanostructures. Here we predict, based on ab initio evolutionary structure search, novel 2D boron structure with non-zero thickness, which is considerably, by 50 meV/atom lower in energy than the recently proposed alpha-sheet structure and its analogues. In particular, this phase is identified for the first time to have a distorted Dirac cone, after graphene and silicene the third elemental material with massless D…
The formation of boron carbide under high pressures and from elemental reactants has been studied and optimum parameters have been determined by varying the (P, T, reactants) conditions. To this end, stoichiometric mixtures of commercial beta rhombohedral boron and amorphous glassy carbon have been subjected to temperatures ranging from 1473 K to 2473 K at pressures of 2 GPa, 5 GPa and 13 GPa. Similar syntheses have been repeated for mixtures of beta boron and graphite, and amorphous boron and amorphous carbon at 2 GPa and 5 GPa. The carbon concentration of boron carbide is shown to be affecte…
We study the effect of electron doping on the bonding character and stability of two-dimensional (2D) structures of elemental boron, called borophene, which is known to form many stable allotropes. Our {\em ab initio} calculations for the neutral system reveal previously unknown stable 2D $ε$-B and $ω$-B structures. We find that the chemical bonding characteristic in this and other boron structures is strongly affected by extra charge. Beyond a critical degree of electron doping, the most stable allotrope changes from $ε$-B to a buckled honeycomb structure. Additional electron doping, mimickin…
The complex crystal chemistry of elemental boron has led to numerous proposed structures with distinctive motifs as well as contradictory findings. Herein, evolutionary structure searches performed at 100 GPa have uncovered a series of potential new metastable phases of boron, and bonding analyses were carried out to elucidate their electronic structure. These polymorphs, dynamically stable at 100 GPa, were grouped into two families. The first was derived from the thermodynamic minimum at these conditions, $α$-Ga, whereas channels comprised the second. Two additional intergrowth structures wer…
Five single-phase WB2- and MoB2-containing high-entropy borides (HEBs) have been made via reactive spark plasma sintering of elemental boron and metals. A large reactive driving force enables the full dissolution of 10-20 mol. % WB2 to form dense, single-phase HEBs, including (Ti0.2Zr0.2Hf0.2Mo0.2W0.2)B2, (Ti0.2Ta0.2Cr0.2Mo0.2W0.2)B2, (Zr0.2Hf0.2Nb0.2Ta0.2W0.2)B2, and (Zr0.225Hf0.225Ta0.225Mo0.225W0.1)B2; the successful fabrication of such single-phase WB2-containing HEBs has not been reported before. In the processing science, this result serves perhaps the best example demonstrating that the…
The combination of high throughput computation and machine learning has led to a new paradigm in materials design by allowing for the direct screening of vast portions of structural, chemical, and property space. The use of these powerful techniques leads to the generation of enormous amounts of data, which in turn calls for new techniques to efficiently explore and visualize the materials space to help identify underlying patterns. In this work, we develop a unified framework to hierarchically visualize the compositional and structural similarities between materials in an arbitrary material s…
We determine the fundamental electronic and optical properties of the high-thermal-conductivity III-V semiconductor boron arsenide (BAs) using density functional and many body perturbation theory including quasiparticle and spin-orbit coupling corrections. We find that the fundamental band gap is indirect with a value of 2.049 eV, while the minimum direct gap has a value of 4.135 eV. We calculate the carrier effective masses and report smaller values for the holes than the electrons, indicating higher hole mobility and easier p-type doping. The small difference between the static and high freq…
γ-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2)δ+(B12)δ- and displays a significant charge transfer δ~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. γ-B28 was first experimentally obtained as a pure boron allotrope in early 2004 and its structure was discovered in 2006. This paper reviews recent results and in particular deals with the contentious issues related to the equation of state, hardness, putativ…
Polar metals based on binary and ternary compounds have been demonstrated in literature. Here, we propose a design principle for ferroelectric-like elemental polar metals and relate it to real materials. The design principle is that, to be an elemental polar metal, atoms should occupy at least two inequivalent Wyckoff positions in a crystal with a polar space group, where inversion symmetry is spontaneously broken. According to this rule, we propose the first class of potential ferroelectric-like elemental polar metals in a distorted α-La-like structure with a polar space group P63mc in which …
Density Functional Theory calculations using the quasi-harmonic approximation have been used to calculate the solid Hugoniot of two polytypes of boron carbide up to 100 GPa. Under the assumption that segregation into the elemental phases occurs around the pressure that the B11Cp(CBC) polytype becomes thermodynamically unstable with respect to boron and carbon, two discontinuities in the Hugoniot, one at 50 GPa and one at 90-100 GPa, are predicted. The former is a result of phase segregation, and the latter a phase transition within boron. First principles molecular dynamics (FPMD) simulations …
For the first time, a group of CaB6-typed cubic rare earth high-entropy hexaborides have been successfully fabricated into dense bulk pellets (>98.5% in relative densities). The specimens are prepared from elemental precursors via in-situ metal-boron reactive spark plasma sintering. The sintered bulk pellets are determined to be single-phase without any detectable oxides or other secondary phases. The homogenous elemental distributions have been confirmed at both microscale and nanoscale. The Vickers microhardness are measured to be 16-18 GPa at a standard indentation load of 9.8 N. The nanoin…
Globally-stable and metastable crystal structure enumeration using polynomial machine learning potentials in elemental As, Bi, Ga, In, La, P, Sb, Sn, and Te
Single-Atom Adsorption on h-BN along the Periodic Table of Elements: From Pristine Surface to Vacancy-Engineered Sites
University of Belgrade − Faculty of Physical Chemistry（贝尔格莱德大学物理化学学院）；Luleå University of Technology（吕勒奥理工大学）；Serbian Academy of Sciences and Arts（塞尔维亚科学与艺术院）
Synergetic Enhancement on Bulk and Grain Boundary Ionic Conduction of Mg Doped High-Entropy NASICON-Type Solid Electrolyte for Solid-State Na+ Batteries by Spray Flame Synthesis
A radical anion based functionalization of the basal plane of two-dimensional (2D) materials is proposed in the present study. Simple charge neutral radical functionalizations typically detach from the basal planes upon reduction. For example, epoxy oxygens irreversibly detach from graphene when reduced by an alkali metal. The radical anion functionalization of 2D materials results in a stable reduced state that can reversibly be oxidized and has high ionic conductivity due to the great mobility of the cations between the negatively charged functional groups on the surface. Depending on the ox…
Room Temperature RF Sputtering of Mixed Ionic and Electronic Conductor Nd2Ni0.8Cu0.2O4+d films
Università degli Studi di Salerno（萨莱诺大学）；CNR-SPIN（意大利国家研究委员会自旋物理中心）；University of Salento（萨尔勒托大学）；INFN-Lecce Section（意大利国家核物理研究所莱切分部）；Institut Ruđer Bošković（鲁德耶尔博什科维奇研究所）
Spin selective non-van der Waal electride nature in manganese under ambient pressure
University of Texas-Rio Grande Valley（德克萨斯大学里奥格兰德河谷分校）；Thomas More University（托马斯莫尔大学）；University of North Carolina at Greensboro（北卡罗来纳大学格林斯伯勒分校）；North Dakota State University（北达科他州立大学）
Synergistic effects of ferromagnetic elements and LAGP solid electrolyte in suppressing and trapping polysulfide shuttle transfers in lithium-sulfur batteries
Nuclear Physics Institute (NPI) of the Czech Academy of Sciences（捷克科学院核物理研究所）
K-Cl is a simple system displaying all four main types of bonding, as it contains (i) metallic potassium, (ii) elemental chlorine made of covalently bonded Cl2 molecules held together by van der Waals forces, and (iii) an archetypal ionic compound KCl. Well-known octet rule (and its special case, the charge balance rule, assigning classical charges of +1 to K and -1 to Cl) predicts that no compounds other than KCl are possible. However, our quantum-mechanical variable-composition evolutionary simulations predict new stable compounds. The phase diagram of the K-Cl system turned out to be extrem…
Combining physical models with dynamically acquired experimental information for the optimization of multicomponent NASICON fast ionic conductors in a self-driving laboratory
University of California Berkeley（加州大学伯克利分校）；Lawrence Berkeley National Laboratory（劳伦斯伯克利国家实验室）；Argonne National Laboratory（阿贡国家实验室）；Bakar Institute of Digital Materials for the Planet, UC Berkeley（加州大学伯克利分校巴克拉星球数字材料研究所）；Vanderbilt University（范德堡大学）
Crystal structure searching and ab initio calculations have been used here to explore low-energy structures of boron carbides under high pressure. Under pressures of 85-110 GPa, a metastable B6C with R-3m symmetry is found to be energetically more stable than the mixture of previous B4C and elemental boron. This B6C is a rhombohedral structure and contains mooncake-like B24 clusters with stuffing of C2 pairs. The mechanical and dynamical stabilities of this structure at ambient pressure are confirmed by its elastic constants and phonon dispersions. The bulk modulus and shear modulus of this ne…
