Precise readout of spin states is crucial for any approach towards physical realization of a spin-based quantum computer and for magnetometry with single spins. Here, we report a new method to strongly improve the optical readout fidelity of electron spin states associated with single nitrogen-vacancy (NV) centers in diamond. The signal-to-noise ratio is enhanced significantly by performing conditional flip-flop processes between the electron spin and the nuclear spin of the NV center's nitrogen atom. The enhanced readout procedure is triggered by a short preparatory pulse sequence. As the nitrogen nuclear spin is intrinsically present in the system, this method is universally applicable to any nitrogen-vacancy center.
Ideal projective quantum measurement makes the system state collapse in one of the observable operator eigenstates $|ϕ_α\rangle$, making it a powerful tool for preparing the system in the desired pure state. Nevertheless, experimental realisations of projective measurement are not ideal. During the measurement time needed to overcome the classical noise of the apparatus, the system state is often (slightly) perturbed, which compromises the fidelity of initialisation. In this paper, we propose an analytical model to analyse the initialisation fidelity of the system performed by the single-shot …
We report high-fidelity, quantum nondemolition, single-shot readout of a superconducting transmon qubit using a DC-biased superconducting low-inductance undulatory galvanometer(SLUG) amplifier. The SLUG improves the system signal-to-noise ratio by 7 dB in a 20 MHz window compared with a bare HEMT amplifier. An optimal cavity drive pulse is chosen using a genetic search algorithm, leading to a maximum combined readout and preparation fidelity of 91.9% with a measurement time of Tmeas = 200ns. Using post-selection to remove preparation errors caused by heating, we realize a combined preparation …
The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readout resonators for less than 250 ns we find an average correct assignment probability for the five measured qubits to be $97\%$. The differences between the individual readout errors and those found whe…
We demonstrate single-shot qubit readout with fidelity sufficient for fault-tolerant quantum computation, for two types of qubit stored in single trapped calcium ions. For an optical qubit stored in the (4S_1/2, 3D_5/2) levels of 40Ca+ we achieve 99.991(1)% average readout fidelity in one million trials, using time-resolved photon counting. An adaptive measurement technique allows 99.99% fidelity to be reached in 145us average detection time. For a hyperfine qubit stored in the long-lived 4S_1/2 (F=3, F=4) sub-levels of 43Ca+ we propose and implement a simple and robust optical pumping scheme …
Qubit readout is an indispensable element of any quantum information processor. In this work, we experimentally demonstrate a non-perturbative cross-Kerr coupling between a transmon and a polariton mode which enables an improved quantum non-demolition (QND) readout for superconducting qubits. The new mechanism uses the same experimental techniques as the standard QND qubit readout in the dispersive approximation, but due to its non-perturbative nature, it maximizes the speed, the single-shot fidelity and the QND properties of the readout. In addition, it minimizes the effect of unwanted decay …
In this work, we introduce machine learning methods to implement readout of a single qubit on $^{171}\mathrm{Yb^{+}}$ trapped-ion system. Different machine learning methods including convolutional neural networks and fully-connected neural networks are compared with traditional methods in the tests. The results show that machine learning methods have higher fidelity, more robust readout results in relatively short time. To obtain a 99% readout fidelity, neural networks only take half of the detection time needed by traditional threshold or maximum likelihood methods. Furthermore, we implement …
The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affectin…
We propose and analyze a high fidelity readout scheme for a single instance approach to quantum computing in rare-earth-ion-doped crystals. The scheme is based on using different species of qubit and readout ions, and it is shown that by allowing the closest qubit ion to act as a readout buffer, the readout error can be reduced by more than an order of magnitude. The scheme is shown to be robust against certain experimental variations, such as varying detection efficiencies, and we use the scheme to predict the expected quantum fidelity of a CNOT gate in these solid state systems. In addition,…
We describe single-shot readout of a trapped-ion multi-qubit register using space and time-resolved camera detection. For a single qubit we measure 0.9(3)x10^{-4} readout error in 400us exposure time, limited by the qubit's decay lifetime. For a four-qubit register (a "qunybble") we measure an additional error of only 0.1(1)x10^{-4} per qubit, despite the presence of 4% optical cross-talk between neighbouring qubits. A study of the cross-talk indicates that the method would scale with negligible loss of fidelity to ~10000 qubits at a density <~1 qubit/um^2, with a readout time ~1us/qubit.
We implement all single-qubit operations with fidelities significantly above the minimum threshold required for fault-tolerant quantum computing, using a trapped-ion qubit stored in hyperfine "atomic clock" states of $^{43}$Ca$^+$. We measure a combined qubit state preparation and single-shot readout fidelity of 99.93%, a memory coherence time of $T^*_2=50$ seconds, and an average single-qubit gate fidelity of 99.9999%. These results are achieved in a room-temperature microfabricated surface trap, without the use of magnetic field shielding or dynamic decoupling techniques to overcome technica…
We study the quantitative characterization of the performance of qubit measurements in this paper. In particular, the back-action evading nature of quantum nondemolition (QND) readout of qubits is fully quantified by quantum trace distance. Only computational basis states are necessary to be taken into consideration. Most importantly, we propose an experimentally efficient method to evaluate the QND fidelity based on the classical trace distance, which uses an experimental scheme with two consecutive measurements. The three key quantifiers of a measurement, i.e., QND fidelity, readout fidelity…
We prepare and detect the hyperfine state of a single 87Rb atom coupled to a fiber-based high finesse cavity on an atom chip. The atom is extracted from a Bose-Einstein condensate and trapped at the maximum of the cavity field, resulting in a reproducibly strong atom-cavity coupling. We use the cavity reflection and transmission signal to infer the atomic hyperfine state with a fidelity exceeding 99.92% in a read-out time of 100 microseconds. The atom is still trapped after detection.
Determination of qubit initialisation and measurement fidelity is important for the overall performance of a quantum computer. However, the method by which it is calculated in semiconductor qubits varies between experiments. In this paper we present a full theoretical analysis of electronic single-shot readout and describe critical parameters to achieve high fidelity readout. In particular, we derive a model for energy selective state readout based on a charge detector response and examine how to optimise the fidelity by choosing correct experimental parameters. Although we focus on single ele…
We determine the optimal parameters for a simple and efficient scheme of dispersive readout of a qubit. Depending on the qubit state (ground or excited), the resonance of a cavity is shifted either to the red or to the blue side. Qubit state is inferred by detecting the photon number transmitted through the cavity. It turns out that this kind of detection provides better measurement fidelity than the detection of the presence or absence of photons only. We show that radiating the cavity on either of the frequencies it shifts to results in a suboptimal measurement. The optimal frequency of the …
The Gottesman-Kitaev-Preskill encoding of a qubit in a harmonic oscillator is a promising building block towards fault-tolerant quantum computation. Recently, this encoding was experimentally demonstrated for the first time in trapped-ion and superconducting circuit systems. However, these systems lack some of the Gaussian operations which are critical to efficiently manipulate the encoded qubits. In particular, homodyne detection, which is the preferred method for readout of the encoded qubit, is not readily available, heavily limiting the readout fidelity. Here, we present an alternative rea…
Single-shot readout is a key component for scalable quantum information processing. However, many solid-state qubits with favorable properties lack the single-shot readout capability. One solution is to use the repetitive quantum-non-demolition readout technique, where the qubit is correlated with an ancilla, which is subsequently read out. The readout fidelity is therefore limited by the back-action on the qubit from the measurement. Traditionally, a threshold method is taken, where only the total photon count is used to discriminate qubit state, discarding all the information of the back-act…
High-fidelity qubit measurements play a crucial role in quantum computation, communication, and metrology. In recent experiments, it has been shown that readout fidelity may be improved by performing repeated quantum non-demolition (QND) readouts of a qubit's state through an ancilla. For a qubit encoded in a two-level system, the fidelity of such schemes is limited by the fact that a single error can destroy the information in the qubit. On the other hand, if a bosonic system is used, this fundamental limit could be overcome by utilizing higher levels such that a single error still leaves sta…
A scalable edge-pass Purcell filter for high-fidelity readout of superconducting qubits
National Laboratory of Solid State Microstructures, School of Physics, Nanjing University（南京大学固体微结构物理学院）；Shishan Laboratory, Nanjing University（南京大学狮山实验室）；Jiangsu Key Laboratory of Quantum Information Science and Technology, Nanjing University（南京大学江苏省量子信息科学与技术重点实验室）；Tencent Quantum Laboratory, Tencent（腾讯量子实验室）
We demonstrate high-fidelity Zeeman qubit state detection in a single trapped 88 Sr+ ion. Qubit readout is performed by shelving one of the qubit states to a metastable level using a narrow linewidth diode laser at 674 nm followed by state-selective fluorescence detection. The average fidelity reached for the readout of the qubit state is 0.9989(1). We then measure the fidelity of state tomography, averaged over all possible single-qubit states, which is 0.9979(2). We also fully characterize the detection process using quantum process tomography. This readout fidelity is compatible with recent…
High fidelity single shot qubit state readout is essential for many quantum information processing protocols. In superconducting quantum circuit, the qubit state is usually determined by detecting the dispersive frequency shift of a microwave cavity from either transmission or reflection. In this paper, we demonstrate the use of constructive interference between the transmitted and reflected signal to optimize the qubit state readout, with which we find a better resolved state discrimination and an improved qubit readout fidelity. As a simple and convenient approach, our scheme can be combined…
Quantum systems must be prepared, controlled, and measured with high fidelity in order to perform complex quantum algorithms. Control fidelities have greatly improved in silicon spin qubits, but state preparation and readout fidelities have generally been poor. By operating with low electron temperatures and employing high-bandwidth cryogenic amplifiers, we demonstrate single qubit readout visibilities >99%, exceeding the threshold for quantum error correction. In the same device, we achieve average single qubit control fidelities >99.95%. Our results show that silicon spin qubits can be opera…
The readout of semiconductor spin qubits based on spin blockade is fast but suffers from a small charge signal. Previous work suggested large benefits from additional charge mapping processes, however uncertainties remain about the underlying mechanisms and achievable fidelity. In this work, we study the single-shot fidelity and limiting mechanisms for two variations of an enhanced latching readout. We achieve average single-shot readout fidelities > 99.3% and > 99.86% for the conventional and enhanced readout respectively, the latter being the highest to date for spin blockade. The signal amp…
We describe the high fidelity dispersive measurement of a superconducting qubit using a microwave amplifier based on the Superconducting Low-inductance Undulatory Galvanometer (SLUG). The SLUG preamplifier achieves gain of 19 dB and yields a signal-to-noise ratio improvement of 9 dB over a state-of-the-art HEMT amplifier. We demonstrate a separation fidelity of 99% at 700 ns compared to 59% with the HEMT alone. The SLUG displays a large dynamic range, with an input saturation power corresponding to 700 photons in the readout cavity.
An important requirement for spin-based quantum information processing is reliable and fast readout of electron spin states, allowing for feedback and error correction. However, common readout techniques often require additional gate structures hindering device scaling or impose stringent constraints on the tuning configuration of the sensed quantum dots. Here, we operate an in-line charge sensor within a triple quantum dot, where one of the dots is coupled to a microwave cavity and used to readout the charge states of the other two dots. Owing to the proximity of the charge sensor, we observe…
We propose and demonstrate a protocol for high-fidelity indirect readout of trapped ion hyperfine qubits, where the state of a $^9\text{Be}^+$ qubit ion is mapped to a $^{25}\text{Mg}^+$ readout ion using laser-driven Raman transitions. By partitioning the $^9\text{Be}^+$ ground state hyperfine manifold into two subspaces representing the two qubit states and choosing appropriate laser parameters, the protocol can be made robust to spontaneous photon scattering errors on the Raman transitions, enabling repetition for increased readout fidelity. We demonstrate combined readout and back-action e…
We investigate spin and charge dynamics of a quantum dot of phosphorus atoms coupled to a radio-frequency single-electron transistor (rf-SET) using full counting statistics. We show how the magnetic field plays a role in determining the bunching or anti-bunching tunnelling statistics of the donor dot and SET system. Using the counting statistics we show how to determine the lowest magnetic field where spin-readout is possible. We then show how such a measurement can be used to investigate and optimise single electron spin-readout fidelity.
We demonstrate a qubit readout scheme that exploits the Jaynes-Cummings nonlinearity of a superconducting cavity coupled to transmon qubits. We find that in the strongly-driven dispersive regime of this system, there is the unexpected onset of a high-transmission "bright" state at a critical power which depends sensitively on the initial qubit state. A simple and robust measurement protocol exploiting this effect achieves a single-shot fidelity of 87% using a conventional sample design and experimental setup, and at least 61% fidelity to joint correlations of three qubits.
In this work we perform direct single-shot readout of the singlet-triplet states in exchange coupled electrons confined to precision placed donor atoms in silicon. Our method takes advantage of the large energy splitting given by the Pauli-spin blockaded (2,0) triplet states, from which we can achieve a single-shot readout fidelity of 98.4$\pm$0.2%. We measure the triplet-minus relaxation time to be of the order 3s at 2.5T and observe its predicted decrease as a function of magnetic field, reaching 0.5s at 1T.
High fidelity single-shot readout of qubits is a crucial component for fault-tolerant quantum computing and scalable quantum networks. In recent years, the nitrogen-vacancy (NV) center in diamond has risen as a leading platform for the above applications. The current single-shot readout of the NV electron spin relies on resonance fluorescence method at cryogenic temperature. However, the the spin-flip process interrupts the optical cycling transition, therefore, limits the readout fidelity. Here, we introduce a spin-to-charge conversion method assisted by near-infrared (NIR) light to suppress …
Three key metrics for readout systems in quantum processors are measurement speed, fidelity and footprint. Fast high-fidelity readout enables mid-circuit measurements, a necessary feature for many dynamic algorithms and quantum error correction, while a small footprint facilitates the design of scalable, highly-connected architectures with the associated increase in computing performance. Here, we present two complementary demonstrations of fast high-fidelity single-shot readout of spins in silicon quantum dots using a compact, dispersive charge sensor: a radio-frequency single-electron box. T…
A common impediment to qubit performance is imperfect state initialization. In the case of the diamond nitrogen-vacancy (NV) center, the initialization fidelity is limited by fluctuations in the defect's charge state during optical pumping. Here, we use real-time control to deterministically initialize the NV center's charge state at room temperature. We demonstrate a maximum charge initialization fidelity of 99.4$\pm$0.1% and present a quantitative model of the initialization process that allows for systems-level optimization of the spin-readout signal-to-noise ratio. Even accounting for the …
Optimized readout strategies for neutral atom quantum processors
Key Laboratory of Quantum Information, Chinese Academy of Sciences, University of Science and Technology of China（中国科学院量子信息重点实验室，中国科学技术大学）；CAS Center For Excellence in Quantum Information and Quantum Physics, University of Science and Technology of China（中国科学院量子信息与量子物理学前沿卓越创新中心，中国科学技术大学）；Hefei National Laboratory, University of Science and Technology of China（合肥国家实验室，中国科学技术大学）；Anhui Center for fundamental sciences in theoretical physics, University of Science and Technology of China（安徽理论物理基础科学中心，中国科学技术大学）
A single nuclear spin holds the promise of being a long-lived quantum bit or quantum memory, with the high fidelities required for fault-tolerant quantum computing. We show here that such promise could be fulfilled by a single phosphorus (31P) nuclear spin in a silicon nanostructure. By integrating single-shot readout of the electron spin with on-chip electron spin resonance, we demonstrate the quantum non-demolition, electrical single-shot readout of the nuclear spin, with readout fidelity better than 99.8% - the highest for any solid-state qubit. The single nuclear spin is then operated as a…
