Theory of the electron spin relaxation in graphene on the SiO$_2$ substrate is developed. Charged impurities and polar optical surface phonons in the substrate induce an effective random Bychkov-Rashba-like spin-orbit coupling field which leads to spin relaxation by the D'yakonov-Perel' mechanism. Analytical estimates and Monte Carlo simulations show that the corresponding spin relaxation times are between micro- to milliseconds, being only weakly temperature dependent. It is also argued that the presence of adatoms on graphene can lead to spin lifetimes shorter than nanoseconds.
A graphene-based superlattice formed due to the periodic modulation of the band gap has been investigated. Such a modulation is possible in graphene deposited on a strip substrate made of silicon oxide and hexagonal boron nitride. The advantages and some possible problems in the superlattice under consideration are discussed. A model describing such a superlattice is proposed and the dispersion relation between the energy and momentum of carriers has been obtained using the transfer matrix method within this model.
High-frequency response of a system with drifting electrons in a highly doped graphene and surface polar optical phonons of a polar substrate is considered. For this interacting system, we obtained a dielectric function, frequencies and decrement/increment of cooperative plasmon-optical phonon oscillations. We found, that the response is significantly depends on the degree of nonequilibrium of the electrons. In particular, interaction between drifting plasmons and surface polar optical phonons leads to an instability of the electron subsystem due to Vavilov-Cherenkov effect. We suggest that th…
The electrical properties of graphene depend sensitively on the substrate. For example, recent measurements of epitaxial graphene on SiC show resistance arising from steps on the substrate. Here we calculate the deformation of graphene at substrate steps, and the resulting electrical resistance, over a wide range of step heights. The elastic deformations contribute only a very small resistance at the step. However, for graphene on SiC(0001) there is strong substrate-induced doping, and this is substantially reduced on the lower side of the step where graphene pulls away from the substrate. The…
Placing graphene on uniaxial substrates may have interesting application potential for graphene-based photonic and optoelectronic devices. Here we analytically derive the dispersion relation for graphene plasmons on uniaxial substrates and discuss their momentum, propagation length and polarization as a function of frequency, propagation direction and both ordinary and extraordinary dielectric permittivities of the substrate. We find that the plasmons exhibit an anisotropic propagation, yielding radially asymmetric field patterns when a point emitter launches plasmons in the graphene layer.
Graphene (G) is a two-dimensional material with exceptional sensing properties. In general, graphene gas sensors are produced in field effect transistor configuration on several substrates. The role of the substrates on the sensor characteristics has not yet been entirely established. To provide further insight on the interaction between ammonia molecules (NH3) and graphene devices, we report experimental and theoretical studies of NH3 graphene sensors with graphene supported on three substrates: SiO2, talc and hexagonal boron nitride (hBN). Our results indicate that the charge transfer from N…
We investigate the electronic properties of graphene upon water adsorption and study the influence of the SiO2 substrate in this context using density functional calculations. Perfect suspended graphene is rather insensitive to H2O adsorbates, as doping requires highly oriented H2O clusters. For graphene on a defective SiO2 substrate, we find a strongly different behavior: H2O adsorbates can shift the substrate's impurity bands and change their hybridization with the graphene bands. In this way, H2O can lead to doping of graphene for much lower adsorbate concentrations than for free hanged gra…
Understanding the adhesion between graphene and other materials is crucial for achieving more reliable graphene-based applications in electronic devices and nanocomposites. The ultra-thin profile of graphene, however, poses significant challenge to direct measurement of its adhesion property using conventional approaches. We show that there is a strong correlation between the morphology of graphene on a compliant substrate with patterned surface and the graphene-substrate adhesion. We establish an analytic model to quantitatively determine such a strong correlation. Results show that, dependin…
Using atomistic simulations we investigate the morphological properties of graphene deposited on top of a nanostructured substrate. Sinusoidally corrugated surfaces, steps, elongated trenches, one dimensional and cubic barriers, spherical bubbles, Gaussian bump and Gaussian depression are considered as support structures for graphene. The graphene-substrate interaction is governed by van der Waals forces and the profile of the graphene layer is determined by minimizing the energy using molecular dynamics simulations. Based on the obtained optimum configurations, we found that: (i) for graphene…
We determine the graphene morphology regulated by substrates with herringbone and checkerboard surface corrugations. As the graphene/substrate interfacial bonding energy and the substrate surface roughness vary, the graphene morphology snaps between two distinct states: 1) closely conforming to the substrate and 2) remaining nearly flat on the substrate. Such a snapthrough instability of graphene can potentially lead to desirable electronic properties to enable graphene-based devices.
We delineate a general theoretical framework to determine the substrate-regulated graphene morphology through energy minimization. We then apply such a framework to study the graphene morphology on a substrate with periodic surface grooves. Depending on the substrate surface roughness and the graphene-substrate interfacial bonding energy, the equilibrium morphology of graphene ranges from 1) closely conforming to the substrate, to 2) remaining flat on the substrate. Interestingly, in certain cases, the graphene morphology snaps between the above two limiting states. Our quantitative results en…
The graphene-enhanced Raman scattering of Rhodamine 6G molecules on pristine, fluorinated and 4-nitrophenyl functionalized graphene substrates was studied. The uniformity of the Raman signal enhancement was studied by making large Raman maps. The relative enhancement of the Raman signal is demonstrated to be dependent on the functional groups, which was rationalized by the different doping levels of pristine, fluorinated and 4-nitrophenyl functionalized graphene substrates. The impact of the Fermi energy of graphene and the phonon energy of the molecules was considered together for the first t…
The structure and electrical properties of a two-dimensional (2D) sheet of silicon on a graphene substrate are studied using first-principles calculations. A new corrugated rectangular structure of silicon is proposed to be the most energetically favorable structure. The shifting of the Fermi energy level indicates self-doping. Calculation of electron density shows a weak coupling between the silicon layer and graphene substrate. The 2D silicon sheet turns to be metallic and has a much higher value of transmission efficiency (TE) than the underlying graphene substrate.
Coupling of plasmons in graphene at terahert (THz) frequencies with surface plasmons in a heavily-doped substrate is studied theoretically. We reveal that a huge scattering rate may completely damp out the plasmons, so that proper choices of material and geometrical parameters are essential to suppress the coupling effect and to obtain the minimum damping rate in graphene. Even with the doping concentration 10^{19} - 10^{20} cm^{-3} and the thickness of the dielectric layer between graphene and the substrate 100 nm, which are typical values in real graphene samples with a heavily-doped substra…
Engineered substrates offer a promising avenue towards graphene devices having tunable properties. In particular, topographically patterned substrates can expose unique behavior due to their ability to induce local variations in strain and electrostatic doping. However, to explore the range of possible science and applications, it is important to create topographic substrates which both have tunable features and are suitable for transport measurements. In this Letter we describe the fabrication of tunable, topographically patterned substrates suitable for transport measurements. We report both…
We report semiconducting behavior of monolayer graphene enabled through plasma activation of substrate surfaces. The graphene devices are fabricated by mechanical exfoliation onto pre-processed SiO2/Si substrates. Contrary to pristine graphene, these graphene samples exhibit a transport gap as well as nonlinear transfer characteristics, a large on/off ratio of 600 at cryogenic temperatures, and an insulating-like temperature dependence. Raman spectroscopic characterization shows evidence of sp3 hybridization of C atoms in the samples of graphene on activated SiO2/Si substrates. We analyze the …
We synthesized three-dimensional nanoporous graphene films by a chemical vapor deposition method with nanoporous copper as a catalytic substrate. The resulting nanoporous graphene has the same average pore size as the underlying copper substrate. Our surface-enhanced Raman scattering (SERS) investigation indicates that the nanoporosity of graphene significantly improves the SERS efficiency of graphene as a substrate as compared to planar graphene substrates.
Out of plane vibrations are suppressed in graphene layers placed on a substrate. These modes, in suspended samples, are relevant for the understanding of properties such as the resistivity, the thermal expansion coefficient, and other. We present a general framework for the study of the properties of out of plane modes in graphene on different substrates. We use the model to estimate the substrate induced changes in the thermal expansion coefficient, or in the temperature dependence of the resistivity.
Based on first principles calculation, the electronic properties of graphene on metal (Ti, Ca, Ni, Mn, Co, Fe, Cr, K) modified SiO2 substrate have been studied. The results of binding energies supported graphene indicate that the metal atoms are adsorbed more stably on O surface than on Si surface of SiO2 substrate, and graphene is adsorbed very stably on metal modified substrate. The band structures of supported graphene are similar with that of suspending graphene when deposited on Co modified SiO2 surface, but change obviously with the effect of decorated Fe atoms. Interesting, a semi-metal…
It is significant to prepare large area of high quality graphene for the study of the characteristics of graphene and the research of the nano-devices based on graphene. This paper summarizes the experiment progresses and mechanism of graphene grown on different substrates. Nowadays, we can obtain the large area of high quality graphene by using the methods, such as CVD, epitaxial growth, etc. The interaction between the graphene and the substrates is closely related to the mismatch of the lattice, weakness of the bonds and the transformation of the electrons, which has a great influence on ge…
The temperature-induced shift of the Raman G line in epitaxial graphene on SiC and Ni surfaces, as well as in graphene supported on SiO2, is investigated with Raman spectroscopy. The thermal shift rate of epitaxial graphene on 6H-SiC(0001) is found to be about three times that of freestanding graphene. This result is explained quantitatively as a consequence of pinning by the substrate. In contrast, graphene grown on polycrystalline Ni films is shown to be unpinned, i.e., to behave elastically as freestanding, despite the relatively strong interaction with the metal substrate. Moreover, it is …
In order to make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We further report on the impact of this process on the electrical properties of the EG films. This process enables EG films to be used in flexible electronic devices or as optically transparent contacts.
Graphene devices on standard SiO2 substrates are highly disordered, exhibiting characteristics far inferior to the expected intrinsic properties of graphene[1-12]. While suspending graphene above the substrate yields substantial improvement in device quality[13,14], this geometry imposes severe limitations on device architecture and functionality. Realization of suspended-like sample quality in a substrate supported geometry is essential to the future progress of graphene technology. In this Letter, we report the fabrication and characterization of high quality exfoliated mono- and bilayer gra…
We study the optical contrast for single and multilayer graphene deposited on a Au/SiO2/Si substrate. Our results prove that optical microscopy allows for easy and quick localization, identification and counting of graphene layers. Visibility depends on the thicknesses of the Au and SiO2 layers as well as the wavelength of the light used. We propose optimum parameters for the detection of graphene.
The possibility of modulation of mid-IR radiation by low voltage gated single/multilayer graphene on Pb(ZrxTi1-x)O3 (PZT) ferroelectric substrate was demonstrated theoretically. The depth of modulation for 5 layer graphene for the range of gate voltages, where thin PZT epitaxial film behaves as high-κ dielectric, can be of 10% order.
Pentacene has been used widely in organic devices, and the interface structure between pentacene and a substrate is known to significantly influence device performances. Here we demonstrate that molecular ordering of pentacene on graphene depends on the interaction between graphene and its underlying SiC substrate. The adsorption of pentacene molecules on zero-layer and single-layer graphene, which were grown on a Sifaced 6H-SiC(0001) wafer, was studied using scanning tunneling microscopy (STM). Pentacene molecules form a quasi-amorphous layer on zero-layer graphene which interacts strongly wi…
The effects of substrate on the electronic properties of Graphene remains unclear. Many theoretical and experimental efforts have been done to clarify this discrepancy. In this work, we studied the electronic transport in armchair Graphene nanoribbons (AGNR) in the presence of substrate's disorder. The three main substrate's disorders -- surface roughness, charged impurity and surface optical phonon -- are investigated. Non-Equilibrium Green's function along with the tight-binding model is employed to investigate the electronic properties of Graphene Nanoribbons. The effects of these disorders…
The Joule heating effect on graphene electronic properties is investigated by using full-band Monte Carlo electron dynamics and three-dimensional heat transfer simulations self-consistently. A number of technologically important substrate materials are examined: SiO2, SiC, hexagonal BN, and diamond. The results illustrate that the choice of substrate has a major impact via the heat conduction and surface polar phonon scattering. Particularly, it is found that the poor thermal conductivity of SiO2 leads to significant Joule heating and saturation velocity degradation in graphene (characterized …
Graphene on a dielectric substrate exhibits spatial doping inhomogeneities, forming electron-hole puddles. Understanding and controlling the latter is of crucial importance for unraveling many of graphene's fundamental properties at the Dirac point. Here we show the coexistence and correlation of charge puddles and topographic ripples in graphene decoupled from the metallic substrate it was grown on. The analysis of interferences of Dirac fermion-like electrons yields a linear dispersion relation, indicating that graphene on a metal can recover its intrinsic electronic properties.
We propose a new method to use gapped graphene as barrier to confine electrons in gapless graphene and form a good quantum dot, which can be realized on an oxygen-terminated $SiO_{2}$ substrate partly H-passivated. In particular, we use ferromagnetic insulators deposited on top of barrier which give rise to a spin related energy spectrum and transport properties. Compared to the complexity of etched quantum dots in graphene, the setup suggested here is a promising candidate for practical applications.
We report mid-infrared photocurrent spectra of graphene nanoribbon arrays on SiO2 dielectrics showing dual signatures of the substrate interaction. First, hybrid polaritonic modes of graphene plasmons and dielectric surface polar phonons produce a thermal photocurrent in graphene with spectral features that are tunable by gate voltage, nanoribbon width, and light polarization. Secondly, phonon-polaritons associated with the substrate are excited, which indirectly heat up the graphene leading to a graphene photocurrent with fixed spectral features. Models for other commonly used substrates show…
In this work we present a fully atomistic reactive (ReaxFF force field) molecular dynamics study of the structural and dynamical aspects of the one-side hydrogenation of graphene membranes, leading to the formation of the so-called graphone structure. We have considered different substrates: graphene, few-layers graphene, graphite and platinum at different temperatures. Our results showed that the hydrogenation rates are very dependent on the substrate and thermal effects. Our results also showed that, similarly to graphane, large hydrogenated domains are unlikely to be formed. These hydrogena…
We investigate the many-body properties of graphene on top of a piezoelectric substrate, focusing on the interaction between the graphene electrons and the piezoelectric acoustic phonons. We calculate the electron and phonon self-energies as well as the electron mobility limited by the substrate phonons. We emphasize the importance of the proper screening of the electron-phonon vertex and discuss the various limiting behaviors as a function of electron energy, temperature, and doping level. The effect on the graphene electrons of the piezoelectric acoustic phonons is compared with that of the …
Graphene, the two-dimensional form of carbon presents outstanding electronic and transport properties. This gives hope for the development of applications in nanoelectronics. However, for industrial purpose, graphene has to be supported by a substrate. We focus here on the graphene-on-SiC system to discuss how the SiC substrate interacts with the graphene layer and to show the effect of the interface on graphene atomic and electronic structures.
We study the energy and temperature relaxation of electrons in graphene on a piezoelectric substrate. Scattering from the combined potential of extrinsic piezoelectric surface acoustical (PA) phonons of the substrate and intrinsic deformation acoustical (DA) phonons of graphene is considered in a (non-)degenerate gas of Dirac fermions. It is shown that in the regime of low energies or temperatures the PA phonons dominate the relaxation and change qualitatively its character. This prediction is relevant for quantum metrology and electronic applications using graphene devices and suggests a new …
Using first-principles calculations we demonstrate sizable exchange coupling between a magnetic molecule and a magnetic substrate via a graphene layer. As a model system we consider cobaltocene (CoCp$_2$) adsorbed on graphene deposited on Ni(111). We find that the magnetic coupling between the molecule and the substrate is antiferromagnetic and varies considerably depending on the molecule structure, the adsorption geometry, and the stacking of graphene on Ni(111). We show how this coupling can be tuned by intercalating a magnetic monolayer, e.g. Fe or Co, between graphene and Ni(111). We iden…
We model the optical visibility of monolayer and bilayer graphene deposited on a silicon/silicon oxide substrate or thermally annealed on the surface of silicon carbide. We consider reflection and transmission setups, and find that visibility is strongest in reflection reaching the optimum conditions when the bare substrate transmits light resonantly. In the optical range of frequencies a bilayer is approximately twice as visible as a monolayer thereby making the two types of graphene distinguishable from each other.
The interaction between graphene plasmons and surface phonons of a semiconductor substrate is investigated, which can be efficiently controlled by the carrier injection of the substrate. The energy and lifetime of surface phonons in a substrate depend a lot on the carrier concentration, which provides a new machanism to tune plasmon-phonon coupled modes (PPCMs). More specifically, the dispersion and lifetime of PPCMs can be controlled by the carrier concentration change of the substrate. The energy of PPCMs for a given momentum increases as the carrier concentration of a substrate increases. O…
The intrinsic doping level of graphene prepared by mechanical exfoliation and standard lithography procedures on thermally oxidized silicon varies significantly and seems to depend strongly on processing details and the substrate morphology. Moreover, transport properties of such graphene devices suffer from hysteretic behavior under ambient conditions. The hysteresis presumably originates from dipolar adsorbates on the substrate or graphene surface. Here, we demonstrate that it is possible to reliably obtain low intrinsic doping levels and to strongly suppress hysteretic behavior even in ambi…
The core-level electronic structures of the exfoliated graphene sheets on a Au-coated SiOx substrate have been studied by synchrotron radiation photoelectron spectroscopy (SR-PES) on a micron-scale. The graphene was firstly demonstrated its visibility on the Au-coated SiOx substrate by micro-optical characterization, and then conducted into SR-PES study. Because of the elimination of charging effect, precise C 1s core-level characterization clearly shows graphitic and contaminated carbon states of graphene. Different levels of Au-coating-induced p-type doping on single- and double-layer graphe…
The use of graphene electronics in space will depend on the radiation hardness of graphene. The damage threshold of graphene samples, subjected to 2 MeV proton irradiation, was found to increase with layer number and also when the graphene layer was supported by a substrate. The thermal properties of graphene as a function of the number of layers or as influenced by the substrate argue against a thermal model for the production of damage by the ion beam. We propose a model of intense electronically-stimulated surface desorption of the atoms as the most likely process for this damage mechanism.
The electronic properties of graphene on top of ferroelectric HfO$_2$ substrates in orthorhombic phase with space group Pca2$_1$ are investigated using density functional theory calculations. The space group Pca2$_1$ was recently identified as one of the two potential candidates for ferroelectricity in hafnia, with the polarization direction oriented along [001] direction. Our results indicate the appearance of sizable energy gaps in graphene induced by the HfO$_2$ substrate, as a consequence of orbital hybridization and locally deformed graphene structure. The gap sizes depend on the type of …
We report on the fabrication and electrical characterization of both single layer graphene micron-sized devices and nanoribbons on a hexagonal boron nitride substrate. We show that the micron-sized devices have significantly higher mobility and lower disorder density compared to devices fabricated on silicon dioxide substrate in agreement with previous findings. The transport characteristics of the reactive-ion-etched graphene nanoribbons on hexagonal boron nitride, however, appear to be very similar to those of ribbons on a silicon dioxide substrate. We perform a detailed study in order to hi…
We present an alternative methodology for calculating the quasi-particle energy, energy loss, and optical spectra of a molecule deposited on graphene or a metallic substrate. To test the accuracy of the method it is first applied to the isolated benzene (C6H6) molecule. The quasiparticle energy levels and especially the energies of the benzene excitons (triplet, singlet, optically active and inactive) are in very good agreement with available experimental results. It is shown that the vicinity of the various substrates (pristine/doped graphene or (jellium) metal surface) reduces the quasiparti…
The entire graphene field-effect-transistor (FET) devices first fabricated on SiO2/Si are peeled from the surface and placed on a different wafer. Both longitudinal and transverse resistivity measurements of the devices before and after the transfer are measured to calculate the mobility for a direct comparison. After transferred to different SiO2/Si wafers, the mobility generally is comparable and the defect density does not show any significant increase, which indicates the degradation due to the transfer process itself is minimal. The same method can be applied to transfer graphene devices …
Controlling the type and density of charge carriers by doping is the key step for developing graphene electronics. However, direct doping of graphene is rather a challenge. Based on first-principles calculations, a concept of overcoming doping difficulty in graphene via substrate is reported.We find that doping could be strongly enhanced in epitaxial graphene grown on silicon carbide substrate. Compared to free-standing graphene, the formation energies of the dopants can decrease by as much as 8 eV. The type and density of the charge carriers of epitaxial graphene layer can be effectively mani…
We study theoretically the deposition of Few Layer Graphene sheets onto a grooved substrate incorporating adhesion between substrate and sheet. We develop a model to understand the equilibrium of the sheet allowing for partial conformation of sheet to substrate. This model gives new insight into recent observations of 'snap-through' from flat to conforming states and emphasizes the crucial role of substrate shape in determining the nature of this transition. Our analytical results are consistent with numerical simulations using a van der Waals-like interaction . Finally we propose a novel subs…
The exceptional mechanical properties of graphene have made it attractive for nano-mechanical devices and functional composite materials. Two key aspects of graphene's mechanical behavior are its elastic and adhesive properties. These are generally determined in separate experiments, and it is moreover typically difficult to extract parameters for adhesion. In addition, the mechanical interplay between graphene and other elastic materials has not been well studied. Here, we demonstrate a technique for studying both the elastic and adhesive properties of few-layer graphene (FLG) by placing it o…
We examine thermal transport in graphene supported on SiO2 using molecular dynamics simulations. Coupling to the substrate reduces the thermal conductivity (TC) of supported graphene by an order of magnitude, due to damping of the flexural acoustic (ZA) phonons. However, increasing the strength of the graphene-substrate interaction enhances the TC of supported graphene, contrary to expectations. The enhancement is due to the coupling of graphene ZA modes to the substrate Rayleigh waves, which linearizes the dispersion and increases the group velocity of the hybridized modes. These findings sug…
This paper reviews the theoretical work undertaken using density functional theory (DFT) to explore graphene's interactions with its surroundings. We look at the impact of substrates, gate dielectrics and edge effects on the properties of graphene. In particular, we focus on graphene-on-quartz and graphene-on-alumina systems, exploring their energy spectrum and charge distribution. Silicon-terminated quartz is found to not perturb the linear graphene spectrum. On the other hand, oxygen-terminated quartz and both terminations of alumina bond with graphene, leading to the opening of a band gap. …
In this paper, we study the morphologic interaction between graphene and Si nanowires on a SiO2 substrate, using molecular mechanics simulations. Two cases are considered: 1) a graphene nanoribbon intercalated by a single Si nanowire on a SiO2 substrate and 2) a blanket graphene flake intercalated by an array of Si nanowires evenly patterned in parallel on a SiO2 substrate. Various graphene morphologies emerge from the simulation results of these two cases, which are shown to depend on both geometric parameters (e.g., graphene nanoribbon width, nanowire diameter, and nanowire spacing) and mate…
Due to its high charge carrier mobility, broadband light absorption, and ultrafast carrier dynamics, graphene is a promising material for the development of high-performance photodetectors. Graphene-based photodetectors have been demonstrated to date using monolayer graphene operating in conjunction with either metals or semiconductors. Most graphene devices are fabricated on doped Si substrates with SiO2 dielectric used for back gating. Here, we demonstrate photodetection in graphene field effect phototransistors fabricated on undoped semiconductor (SiC) substrates. The photodetection mechani…
We investigate the energy relaxation of hot carriers produced by photoexcitation of graphene through coupling to both intrinsic and remote (substrate) surface polar phonons using the Boltzmann equation approach. We find that the energy relaxation of hot photocarriers in graphene on commonly used polar substrates, under most conditions, is dominated by remote surface polar phonons. We also calculate key characteristics of the energy relaxation process, such as the transient cooling time and steady state carrier temperatures and photocarriers densities, which determine the thermoelectric and pho…
We present a fabrication process for graphene-based devices where a graphene monolayer is suspended above a local metallic gate placed in a trench. As an example we detail the fabrication steps of a graphene field-effect transistor. The devices are built on a bare high-resistivity silicon substrate. At temperatures of 77~K and below, we observe the field-effect modulation of the graphene resistivity by a voltage applied to the gate. This fabrication approach enables new experiments involving graphene-based superconducting qubits and nano-electromechanical resonators. The method is applicable t…
In order to take advantage of the enormous potential of graphene for future electronic micro-circuits and other applications it is necessary to develop reliable, rapid and widely applicable methods to visualize graphene based structures. We report here on a micro-droplet condensation technique, which allows for quick visual identification of graphene on a variety of substrates, including some which were previously considered unsuitable for the visualization of carbon layers. The technique should also be applicable to visualize artificially patterned graphene structures which are expected to be…
The strain induced pseudo-magnetic field in supported graphene deposited on top of a nanostructured substrate is investigated by using atomistic simulations. Step, elongated trench, one dimensional barrier, spherical bubbles, Gaussian bump and Gaussian depression are considered as support structures for graphene. From the obtained optimum configurations we found very strong induced pseudo-magnetic fields which can reach up to $\sim$ 1000\,T due to the strain-induced deformations in the supported graphene. Different magnetic confinements with controllable geometries are found by tuning the patt…
We describe a simple and scalable method for the transfer of CVD graphene for the fabrication of field effect transistors. This is a dry process that uses a modified RCA cleaning step to improve the surface quality. In contrast to conventional fabrication routes where lithographic steps are performed after the transfer, here graphene is transferred to a pre-patterned substrate. The resulting FET devices display nearly zero Dirac voltage, and the contact resistance between the graphene and metal contacts is on the order of 910 +- 340 Ohm-micrometer. This approach enables formation of conducting…
It is promising to apply quantum-mechanically confined graphene systems in field-effect transistors. High stability, superior performance, and large-scale integration are the main challenges facing the practical application of graphene transistors. Our understandings of the adatom-graphene interaction combined with recent progress in the nanofabrication technology indicate that very stable and high-quality graphene nanostripes could be integrated in substrate-supported functionalized (hydrogenated or fluorinated) graphene using electron-beam lithography. We also propose that parallelizing a co…
We develop the theory of heat conductivity in supported graphene, accounting for coherent phonon scattering on disorder induced by an amorphous substrate. We derive spectra for in-plane and out-of-plane phonons in the framework of Green's function approach. The energetic parameters of the theory are obtained using the molecular dynamics simulations for graphene on SiO$_2$ substrate. The heat conductivity is calculated by the Boltzmann transport equation. We find that the interaction with the substrate drastically reduces the phonon lifetime and completely suppresses the contribution of ZA phon…
Graphene is a truly two-dimensional material with exceptional electronic, mechanical, and optical properties. As such, it consists of surface only and can be probed by the well developed surface-science techniques as, e.g., scanning tunneling microscopy. This method bridges the gap between the surface science community and the electronic device community and might lead to novel combined approaches. Here, I review some of the scanning tunneling microscopy (STM) and spectroscopy (STS) experiments on monolayer graphene samples. I will concentrate on graphene samples deposited on insulating substr…
