Spatially-resolved Raman spectra of individual pristine suspended carbon nanotubes are observed under electrical heating. The Raman G+ and G- bands show unequal temperature profiles. The preferential heating is more pronounced in short nanotubes (2 um) than in long nanotubes (5 um). These results are understood in terms of the decay and thermalization of non-equilibrium phonons, revealing the mechanism of thermal transport in these devices. The measurements also enable a direct estimate of thermal contact resistances and the spatial variation of thermal conductivity.
Resonant manipulation of carbon nanotube valley-spin qubits by an electric field is investigated theoretically. We develop a new analysis of electrically driven spin resonance exploiting fixed physical characteristics of the nanotube: a bend and inhomogeneous disorder. The spectrum is simulated for an electron valley-spin qubit coupled to a hole valley-spin qubit and an impurity electron spin, and features that coincide with a recent measurement are identified. We show that the same mechanism allows resonant control of the full four-dimensional spin-valley space.
We demonstrate the realization of an electrically-driven integrated source of surface plasmon polaritons. Light-emitting individual single-walled carbon nanotube field effect transistors were fabricated in a plasmonic-ready platform. The devices were operated at ambient condition to act as an electroluminescence source localized near the contacting gold electrodes. We show that photon emission from the semiconducting channel can couple to propagating surface plasmons developing in the electrical terminals. Momentum-space spectroscopy suggests that excited plasmon modes are bound to the metal-g…
We have studied the current through a carbon nanotube quantum dot with one ferromagnetic and one normal-metal lead. For the values of gate voltage at which the normal lead is resonant with the single available non-degenerate energy level on the dot, we observe a pronounced decrease in the current for one bias direction. We show that this rectification is spin-dependent, and that it stems from the interplay between the spin accumulation and the Coulomb blockade on the quantum dot. Our results imply that the current is spin-polarized for one direction of the bias, and that the degree of spin pol…
The fundamental question of how chirality affects the electronic coupling of a nanotube to metal contacts is important for the application of nanotubes as nanowires. We show that metallic-zigzag nanotubes are superior to armchair nanotubes as nanowires, by modeling the metal-nanotube interface. More specifically, we show that as a function of coupling strength, the total electron transmission of armchair nanotubes increases and tends to be pinned close to unity for a metal with Fermi wave vector close to that of gold. In contrast, the total transmission of zigzag nanotubes increases to the max…
We describe dynamics of spin and valley transitions driven by alternating electric fields in quantum dots defined electrostatically within semiconducting carbon nanotubes (CNT). We use the tight-binding approach to describe the states localized within a quantum dot taking into account the circumferential spin-orbit interaction due to the s-p hybridization and external fields. The basis of eigenstates localized in the quantum dot is used in the solution of the time-dependent Schroedinger equation for description of spin flips and inter-valley transitions that are driven by periodic perturbation…
Vertically aligned ZnO nanotube arrays fabricated on an ITO substrate are found to exhibit strong persistent photoconductivity (PPC) effect and electrically driven conductance switching behavior, though the latter shows a gradual decay from high conductance state to a low conductance state. Unlike the electrical switching, the PPC cannot be reset or reversed by an electrical pulse. Excitation wavelength dependent conductance measurement indicates the presence of the defect localized states (DLS) ~ 240meV above the valence band edge, in support of the hypothesis that the doubly ionization of th…
An ambipolar $n$-$p$ double quantum dot defined by potential variation along a semiconducting carbon-nanotube is considered. We focus on the (1e,1h) charge configuration with a single excess electron in the conduction band state confined in the $n$-type dot and a single missing electron in the valence band state of the $p$-dot for which lifting of the Pauli blockade of the current was observed in the electric-dipole spin resonance [E. A. Laird et al. Nat. Nanotech. 8 , 565 (2013)]. The dynamics of the system driven by periodic electric field is studied with the Floquet theory and the time-depe…
Electrically-driven light emission from carbon nanotubes could be exploited in nano-scale lasers and single-photon sources, and has therefore been the focus of much research. However, to date, high electric fields and currents have been either required for electroluminescence, or have been an undesired side effect, leading to high power requirements and low efficiencies. In addition, electroluminescent linewidths have been broad enough to obscure the contributions of individual optical transitions. Here, we report electrically-induced light emission from individual carbon nanotube p-n diodes. …
Light emission from nanostructures exhibits rich quantum effects and has broad applications. Single-walled carbon nanotubes (SWNTs) are one-dimensional (1D) metals or semiconductors, in which large number of electronic states in a narrow range of energies, known as van Hove singularities, can lead to strong spectral transitions. Photoluminescence and electroluminescence involving interband transitions and excitons have been observed in semiconducting SWNTs, but are not expected in metallic tubes due to non-radiative relaxations. Here, we show that in the negative differential conductance regim…
Carbon nanotubes bridge the molecular and crystalline quantum worlds, and their extraordinary electronic, mechanical and optical properties have attracted enormous attention from a broad scientific community. We review the basic principles of fabricating spin-electronic devices based on individual, electrically-gated carbon nanotubes, and present experimental efforts to understand their electronic and nuclear spin degrees of freedom, which in the future may enable quantum applications.
Centimeter scale aligned carbon nanotube arrays are grown from nanoparticle metal catalyst pads. We find the nanotubes grow both with and against the wind. A metal underlayer provides in-situ electrical contact to these long nanotubes with no post growth processing needed. Using the electrically contacted nanotubes, we study electrical transport of 0.4 cm long nanotubes. The source drain I-V curves are quantitatively described by a classical, diffusive model. Our measurements show that the outstanding transport properties of nanotubes can be extended to the cm scale and open the door to large …
We describe an approach to electrically control the strong interaction between a single electron spin and the vibrational motion of a suspended carbon nanotube resonator. The strength of the deflection-induced spin-phonon coupling is dependent on the wavefunction of the electron confined in a lateral carbon nanotube quantum dot. An electrical field along the nanotube shifts the effective center of the quantum dot, leading to the corresponding modification of the spin-phonon strength. Numerical simulations with experimentally reachable parameters show that high fidelity quantum state transfer b…
Antenna-coupled suspended single carbon nanotubes exposed to 108 GHz microwave radiation are shown to be selectively heated with respect to their metal contacts. This leads to an increase in the conductance as well as to the development of a power-dependent DC voltage. The increased conductance stems from the temperature dependence of tunneling into a one-dimensional electron system. The DC voltage is interpreted as a thermovoltage, due to the increased temperature of the electron liquid compared to the equilibrium temperature in the leads.
We report on the fabrication and characterization of all-carbon hybrid quantum devices based on graphene and single-walled carbon nanotubes. We discuss both, carbon nanotube quantum dot devices with graphene charge detectors and nanotube quantum dots with graphene leads. The devices are fabricated by chemical vapor deposition growth of carbon nanotubes and subsequent structuring of mechanically exfoliated graphene. We study the detection of individual charging events in the carbon nanotube quantum dot by a nearby graphene nanoribbon and show that they lead to changes of up to 20% of the conduc…
Charge screening effect in metallic carbon nanotubes is investigated in a model including the one-dimensional long-range Coulomb interaction. It is pointed out that an external charge which is being fixed spatially is screened by internal electrons so that the resulting object becomes electrically neutral. We found that the screening length is given by about the diameter of a nanotube.
We observe photothermal self-oscillations in individual, suspended, quasi-metallic carbon nanotube (CNT) pn devices irradiated with focused CW 633nm light. Here, the bottom of the trench forms an optical cavity with an anti-node at lambda/4. Oscillations arise from the optical heating of the nanotube, which causes thermal contraction of the nanotube (negative thermal expansion coefficient). This, in turn, moves the CNT out of the anti-node (maximum field intensity), where the nanotube cools to a lower temperature. It then expands and returns to the maximum field intensity anti-node where it is…
High bias electrical transport characteristics of freely suspended metallic single-walled carbon nanotubes (SWNTs) are investigated at 250-400K in vacuum and various gases. Self-heating is exploited to examine the temperature dependence of phonon transport and optical phonon decay in SWNTs. The acoustic phonon thermal conductivity of a SWNT follows ~1/T at high temperatures. Non-equilibrium optical phonon effects in suspended nanotubes decrease as the ambient temperature increases. Gas molecules assist the relaxation of hot optical phonons along the tube length and enable enhanced current flow…
We report on the fabrication and operation of a multi-element vibrational structure consisting of two graphene mechanical resonators coupled by a nanotube beam. The whole structure is suspended. Each graphene resonator is clamped by two metal electrodes. The structure is fabricated using a combination of electron-beam lithography and atomic-force microscopy nano-manipulation. This layout allows us to detect the mechanical vibrations electrically. The measured eigenmodes are localized in either one of the graphene resonators. The coupling due to the nanotube is studied by measuring the shift of…
A mechanically bistable single-walled carbon nanotube can act as a variable-shaped capacitor with a voltage-controlled transition between collapsed and inflated states. This external control parameter provides a means to tune the system so that collapsed and inflated states are degenerate, at which point the tube's susceptibility to diverse external stimuli-- temperature, voltage, trapped atoms -- diverges following a universal curve, yielding an exceptionally sensitive sensor or actuator that is characterized by a vanishing energy scale. For example, the boundary between collapsed and inflate…
Although electron spins in III-V semiconductor quantum dots have shown great promise as qubits, a major challenge is the unavoidable hyperfine decoherence in these materials. In group IV semiconductors, the dominant nuclear species are spinless, allowing for qubit coherence times that have been extended up to seconds in diamond and silicon. Carbon nanotubes are a particularly attractive host material, because the spin-orbit interaction with the valley degree of freedom allows for electrical manipulation of the qubit. In this work, we realise such a qubit in a nanotube double quantum dot. The q…
We compute for the first time full elastic deformations, as well as length, of self-trapped electronic states in carbon nanotubes of general radius and chirality, within the unifying framework of a recently introduced two field model for electromechanics of carbon nano-structures. We find that deformations are highly non monotonic in the chiral angle, whereas the length of the polaron is not. Applications include nano-mechanical devices as electrically or optically driven nano-actuators.
Carbon based optoelectronic devices promise to revolutionize modern integrated circuits by combining outstanding electrical and optical properties into a unified technology. By coupling nanoelectronic devices to nanophotonic structures functional components such as nanoscale light emitting diodes, narrow-band thermal emitters, cavity controlled detectors and wideband electro optic modulators can be realized for chipscale information processing. These devices not only allow the light-matter interaction of low-dimensional systems to be studied, but also provide fundamental building blocks for hi…
Fluid and ionic transport at nanoscale recently highlighted a wealth of exotic behaviours. However, the artificial nanofluidic devices are still far from the advanced functionalities existing in biological systems, such as electrically and mechanically activated transport. Here we focus on the ionic transport through 2 nm-radius individual multiwalled carbon nanotubes (CNT), under the combination of mechanical and electrical forcings. Our findings evidence mechanically activated ionic transport under the form of an ionic conductance which depends quadratically on the applied pressure. Our theo…
The dynamical conductance of electrically contacted single-walled carbon nanotubes is measured from dc to 10 GHz as a function of source-drain voltage in both the low-field and high-field limits. The ac conductance of the nanotube itself is found to be equal to the dc conductance over the frequency range studied for tubes in both the ballistic and diffusive limit. This clearly demonstrates that nanotubes can carry high-frequency currents at least as well as dc currents over a wide range of operating conditions. Although a detailed theoretical explanation is still lacking, we present a phenomen…
In this work, we present a detailed static and dynamic analysis of a recently reported electrically actuated buckled carbon nanotube (CNT) resonator, based on the Euler-Bernoulli beam theory. The system behavior is analyzed using the Galerkin reduced order model. We show that a simple single-modal analysis can already predict snap-through bi-stability in a buckled CNT resonator. However, we prove that the experimental data, in which the snap-through buckling occurs at a finite frequency, cannot be explained without taking into account out-of-plane motion. The buckled CNTs are the first type of…
Heat dissipation in electrically biased semiconducting carbon nanotubes (CNTs) on single crystal quartz and amorphous SiO2 is examined with temperature profiles obtained by spatially resolved Raman spectroscopy. Despite the differences in phonon velocities, thermal conductivity and van der Waals interactions with CNTs, on average, heat dissipation into single crystal quartz and amorphous SiO2 is found to be similar. Large temperature gradients and local hot spots often observed underscore the complexity of CNT temperature profiles and may be accountable for the similarities observed.
The connection of electrical leads to wire-like molecules is a logical step in the development of molecular electronics, but also allows studies of fundamental physics. For example, metallic carbon nanotubes are quantum wires that have been found to act as one-dimensional quantum dots, Luttinger-liquids, proximity-induced superconductors and ballistic and diffusive one-dimensional metals. Here we report that electrically-contacted single-wall nanotubes can serve as powerful probes of Kondo physics, demonstrating the universality of the Kondo effect. Arising in the prototypical case from the in…
Spins confined in quantum dots are considered as a promising platform for quantum information processing. While many advanced quantum operations have been demonstrated, experimental as well as theoretical efforts are now focusing on the development of scalable spin quantum bit architectures. One particularly promising method relies on the coupling of spin quantum bits to microwave cavity photons. This would enable the coupling of distant spins via the exchange of virtual photons for two qubit gate applications, which still remains to be demonstrated with spin qubits. Here, we use a circuit QED…
The photoconductance properties of photosystem I (PSI) covalently bound to carbon nanotubes (CNTs) are measured. We demonstrate that the PSI forms active electronic junctions with the CNTs enabling control of the CNTs photoconductance by the PSI. In order to electrically contact the photoactive proteins, a cysteine mutant is generated at one end of the PSI by genetic engineering. The CNTs are covalently bound to this reactive group using carbodiimide chemistry. We detect an enhanced photoconductance signal of the hybrid material at photon wavelengths resonant to the absorption maxima of the PS…
We have measured the electroluminescence and photoluminescence of (9,7) semiconducting carbon nanotube devices and demonstrate that the electroluminescence wavelength is determined by the nanotube's chiral index (n,m). The devices were fabricated on Si3N4 membranes by dielectrophoretic assembly of tubes from monochiral dispersion. Electrically driven (9,7) devices exhibit a single Lorentzian shaped emission peak at 825 nm in the visible part of the spectrum. The emission could be assigned to the excitonic E22 interband transition by comparison of the electroluminescence spectra with correspond…
We develop an effective tight-binding Hamiltonian for spin-orbit (SO) interaction in bent carbon nanotubes (CNT) for the electrons forming the $π$ bonds between the nearest neighbor atoms. We account for the bend of the CNT and the intrinsic spin-orbit interaction which introduce mixing of $π$ and $σ$ bonds between the $p_z$ orbitals along the CNT. The effect contributes to the main origin of the SO coupling--the folding of the graphene plane into the nanotube. We discuss the bend-related contribution of the SO coupling for resonant single-electron spin and charge transitions in a double quant…
The controlled introduction of covalent sp$^{3}$ defects into semiconducting single-walled carbon nanotubes (SWCNTs) gives rise to exciton localization and red-shifted near-infrared luminescence. The single-photon emission characteristics of these functionalized SWCNTs make them interesting candidates for electrically driven quantum light sources. However, the impact of sp$^{3}$ defects on the carrier dynamics and charge transport in carbon nanotubes remains an open question. Here, we use ultrafast, time-resolved optical-pump terahertz-probe spectroscopy as a direct and quantitative technique …
We show that quantum confinement in the valence and conduction bands of semiconducting single-walled carbon nanotubes can be engineered by means of artificial defects. This ability holds potential for designing future nanotube-based quantum devices such as electrically driven room-temperature single-photon sources emitting at telecom-wavelength. Using Ar$^{+}$ and N$^{+}$ ion-induced defects, intrananotube quantum dots with sub-10 nm lateral sizes are created, giving rise to quantized electronic bound states with level spacings of the order of 100 meV and larger. Using low-temperature scanning…
Single walled carbon nanotubes as emerging quantum-light sources may fill a technological gap in silicon photonics due to their potential use as near infrared, electrically driven, classical or non-classical emitters. Unlike in photoluminescence, where nanotubes are excited with light, electrical excitation of single tubes is challenging and heavily influenced by device fabrication, architecture and biasing conditions. Here we present electroluminescence spectroscopy data of ultra short channel devices made from (9,8) carbon nanotubes emitting in the telecom band. Emissions are stable under cu…
Phonon carrier interactions can have significant impact on device performance. They can be probed by measuring the phonon lifetime, which reflects the interaction strength of a phonon with other quasi-particles in particular charge carriers as well as its companion phonons. The carrier phonon and phonon-phonon contributions to the phonon lifetime can be disentangled from temperature dependent studies. Here, we address the importance of phonon carrier interactions in Joule-heated graphene constrictions in order to contribute to the understanding of energy dissipation in graphene based electroni…
Direct Realization of Near-Ideal Carbyne in Ultrathin Boron Nitride Nanotubes
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Humboldt-Universität zu Berlin（柏林洪堡大学）；Center for the Science of Materials Berlin, Humboldt-Universität zu Berlin（柏林材料科学中心）；Politecnico di Milano（米兰理工大学）；Huzhou Normal University（湖州师范学院）
