In the recent years, a spin-valve was developed with a current-confined-path structure consisting of a non-oxide-layer (NOL). We analyze magnetic structures of the current-confinedpath in the nano-oxide layer sandwiched between ferromagnetic electrodes and clarify the dependency of the magnetic structure on the shape and size of the current-confined-path. Our results of stiffness energy density and thermal stability shows that we should fabricate a CPP spin-valve with narrow current-confinedpaths with large aspect ratio and strong constriction in order to enhance the MR ratio.
We theoretically study the current-perpendicular-to-plane magnetoresistance of a domain wall confined in a current-confined-path (CCP) structure made of a nano-oxide-layer (NOL). In order to calculate the MR ratio of the system, the continuity equations for charge and spin currents are numerically solved with the three-dimensional CCP geometry by use of finite element method. It is confirmed that the MR ratio is enhanced by the CCP structure, which is consistent with the experimental results.
The analysis of the electronic surface properties of transition metal oxides being key materials for future nanoelectronics requires a direct characterization of the conductivity with highest spatial resolution. Using local conductivity atomic force microscopy (LC-AFM) we demonstrate the possibility of recording current maps with true atomic resolution. The application of this technique on surfaces of reduced TiO$_2$ and SrTiO$_3$ reveals that the distribution of surface conductivity has a significant localized nature. Assisted by density functional theory (DFT) we propose that the presence of…
Assemblies of magnetic nanoparticles show a great potential for application in biomedicine, in particular, in magnetic hyperthermia. However, to achieve desired therapeutic effect in magnetic hyperthermia the assembly of nanoparticles should have a sufficiently high specific absorption rate in alternating magnetic field of moderate amplitude and frequency.
We show through density functional theory calculations that extended magnetic states can inherently occur in oxides as the size of the crystals is reduced down to the nanometer scale even when they do not explicitly include intrinsic defects. This is because in nanoscale systems crystallographically perfect crystallites paradoxically result in nonstoichiometric compositions owing to the finite number of constituting atoms. In these structurally perfect but stoichiometrically imperfect nanocrystallites, the spin-triplet state is found to be more stable than the spin-singlet state, giving rise t…
In this paper, we establish the existence of both compressive stress and charge transfer process in hydrothermally synthesized cobalt ferrite-graphene oxide (CoFe2O4/GO) nanocomposites. Transmission electron microscopy (TEM) results reveal the decoration of CoFe2O4 nanoparticles on GO sheets. Magnetic response of nanocomposites was confirme from superconducting quantum interference device (SQUID) magnetometer measurement. Optical properties of these nanocomposites were investigated by Raman spectroscopy. Interfacial compressive stress involved in this system is evaluated from observed blue shi…
We performed ab initio computations of the magnetic properties of simple iron oxide clusters and slabs. We considered an iron oxide cluster functionalized by a molecule or glued to a gold cluster of the same size. We also considered a magnetite slab coated by cobalt oxide or a mixture of iron oxide and cobalt oxide. The changes in magnetic behavior were explored using constrained magnetic calculations. A possible value for the surface anisotropy was estimated from the fit of a classical Heisenberg model on ab initio results. The value was found to be compatible with estimations obtained by oth…
We report on the formation of oriented gold nano structures on Si(100) substrate by annealing procedures in low vacuum (\approx10-2 mbar) and at high temperature (\approx 975^{\circ} C). Various thicknesses of gold films have been deposited with SiOx (using high vacuum thermal evaporation) and without SiOx (using molecular beam epitaxy) at the interface on Si(100). Electron microscopy measurements were performed to determine the morphology, orientation of the structures and the nature of oxide layer. Interfacial oxide layer, low vacuum and high temperature annealing conditions are found to be …
The authors have shown that nanogranular indium tin oxide (ITO) films, deposited by spray pyrolysis on silicon substrate, demonstrate ultralow thermal conductivity ~ 0.84 +/-0.12 Wm-1K-1 at room temperature. This value is approximately by one order of magnitude lower than that in bulk ITO. The strong drop of thermal conductivity is explained by nanogranular structure and porosity of ITO films, resulting in enhanced phonon scattering on grain boundaries. The experimental results were interpreted theoretically, employing Boltzmann transport equation approach for phonon transport and filtering mo…
We report a comprehensive study on the electrochemical performance of four different Transition Metal Oxides encapsulated inside carbon nanotubes (CNT). Irrespective of the type of oxide-encapsulate, all these samples exhibit superior cyclic stability as compared to the bare-oxide. Innovative use of camphor during sample synthesis enables precise control over the morphology of these self-organized carbon nanotube structures, which in turn appears to play a crucial role in the magnitude of the specific capacity. A comparative evaluation of the electrochemical data on different samples bring for…
We report on the polarized neutron reflectometry investigation of monolayer of magnetic iron oxide nanoparticles assembled by the Langmuir-Schaefer method. After deposition onto a solid substrate the polarized neutron reflectometry measurements in the external magnetic field were carried out. Thickness, density, roughness and in-depth resolved magnetization profile of the resulted layer were obtained from accurate fitting routine.
We report on the observation of anisotropic magnetoresistance (AMR) in vertical asymmetric nano-contacts (NCs) made through AlO$_x$ nano-oxide layer (NOL) formed by ion-assisted oxidation method in the film stack of Co/AlO$_x$-NOL/Pt. Analysis of NC formation was based on \emph{in situ} conductive atomic force microscopy and transmission electron microscopy. Depending on the purity of NCs from Al contamination, we observed up to 29% AMR ratio at room temperature.
The nucleation, distribution and composition of erbium embedded in a SiO$_2$-Si layer were studied with High Resolution Transmission Electron Microscopy (HRTEM), Electron Energy Loss Spectroscopy (EELS), Energy Filtered TEM (EFTEM), Scanning Transmission Electron Microscopy (STEM) and X-ray Photoelectron Spectroscopy (XPS). When the SiO$_2$ layer contains small amounts of Si and Er, nanoclusters of Er-oxide are formed throughout the whole layer. Exposure of the oxide to an electron beam with 1.56*10$^6$ electrons/nm$^2$/sec. causes nanocluster growth. Initially this growth matches the Ostwald …
In this report, an analytic model to predict phase transitions of confined fluids in nano systems is presented and it is used to predict the behavior of the confined fluid in nanotubes and nanoslits. In our approach besides including a third degree of freedom due to wall effect to define the state of the system, the tensorial character for pressure is considered. Using the perturbation theory of statistical mechanics it is shown that the van der Waals equation of state is equally valid for small as well as large systems. The model proposed is shown to predict the liquid-vapor phase transition …
We report direct measurements of the potential barriers and electronic coupling between nanowire segments within a sketch-based oxide nanotransistor (SketchFET) device. Near room temperature, switching is governed by thermally activation across a potential barrier controlled by the nanowire gate. Below T=150 K, a crossover to quantum field emission is observed that is sensitive to structural phase transitions in the SrTiO3 layer. This direct measurement of the source-drain and gate-drain energy barriers is crucial for the development of room-temperature logic and memory elements and low-temper…
The design of artificial vortex pinning landscapes is a major goal towards large scale applications of cuprate superconductors. While disordered nanometric inclusions have shown to modify their vortex phase diagram and to produce enhancements of the critical current1,2, the effect of ordered oxide nanostructures remains essentially unexplored. This is due to the very small nanostructure size imposed by the short coherence length, and to the technological difficulties in the nanofabrication process. Yet, the novel phenomena occurring at oxide interfaces open a wide spectrum of technological opp…
We have studied spin relaxation characteristics in a Ag nanowire covered with various oxide layers of Bi2O3, Al2O3, HfO2, MgO or AgOx by using non-local spin valve structures. The spin-flip probability, a ratio of momentum relaxation time to spin relaxation time at 10 K, exhibits a gradual increase with an atomic number of the oxide constituent elements, Mg, Al, Ag and Hf. Surprisingly the Bi2O3 capping was found to increase the probability by an order of magnitude compared with other oxide layers. This finding suggests the presence of an additional spin relaxation mechanism such as Rashba eff…
We report about a combined structural and magnetometric characterization of self-assembled magnetic nanoparticle arrays. Monodisperse iron oxide nanoparticles with a diameter of 20 nm were synthesized by thermal decomposition. The nanoparticle suspension was spin-coated on Si substrates to achieve self-organized arrays of particles and subsequently annealed at various conditions. The samples were characterized by x-ray diffraction, bright and dark field high resolution transmission electron microscopy (HRTEM). The structural analysis is compared to the magnetic behavior investigated by superco…
Results of quantum mechanical simulations of the influence of edge disorder on transport in graphene nanoribbon metal oxide semiconductor field-effect transistors (MOSFETs) are reported. The addition of edge disorder significantly reduces ON-state currents and increases OFF-state currents, and introduces wide variability across devices. These effects decrease as ribbon widths increase and as edges become smoother. However the bandgap decreases with increasing width, thereby increasing the band-to-band tunneling mediated subthreshold leakage current even with perfect nanoribbons. These results …
A new nano-lithography technique compatible with conducting oxide interfaces, which requires a single lithographic step with no additional amorphous layer deposition or etching, is presented. It is demonstrated on SrTiO3/LaAlO3 interface where a constriction is patterned in the electron liquid. We find that an additional back-gating can further confine the electron liquid into an isolated island. Conductance and differential conductance measurements show resonant tunneling through the island. The data at various temperatures and magnetic fields are analyzed and the effective island size is fou…
We describe magnetotransport experiments performed on Hall crosses made from quantum wires at LaAlO3/SrTiO3 interfaces. Shubnikov-de Haas oscillations measured in a 14-nm wide structure exhibit modulations that are consistent with spin-orbit coupling or valley degeneracies. Hall measurements performed on the 6 nm-wide Hall cross reveal dissipative coupling to magnetic phases. Hall plateaus are observed that deviate significantly from two-dimensional quantum Hall counterparts. Non-monotonic dips in the Hall resistance are attributed to one-dimensional confinement and spin-orbit coupling.
Magnetic materials have found wide application ranging from electronics and memories to medicine. Essential to these advances is the control of the magnetic order. To date, most room-temperature applications have a fixed magnetic moment whose orientation is manipulated for functionality. Here we demonstrate an iron-oxide and graphene oxide nanocomposite based device that acts as a tunable ferromagnet at room temperature. Not only can we tune its transition temperature in a wide range of temperatures around room temperature, but the magnetization can also be tuned from zero to 0.011 A.m$^2$/kg …
The interface between polar LaAlO3 and non-polar SrTiO3 exhibits a remarkable variety of electronic behavior associated with the formation of an interfacial quasi-two-dimensional electron gas (q-2DEG). By "sketching" patterns of charge on the top LaAlO3 surface, the LaAlO3/SrTiO3 interface conductance can be controlled with near-atomic spatial resolution. Using this technique, a sketch-based oxide nanotransistor (SketchFET) was demonstrated with a minimum feature size of just two nanometers. Here we report direct measurements of the potential barriers and electronic coupling between nanowire s…
In this work, we demonstrate scaled back-end-of-line (BEOL) compatible indium oxide (In2O3) transistors by atomic layer deposition (ALD) with channel thickness (Tch) of 1.0-1.5 nm, channel length (Lch) down to 40 nm, and equivalent oxide thickness (EOT) of 2.1 nm, with record high drain current of 2.0 A/mm at VDS of 0.7 V among all oxide semiconductors. Enhancement-mode In2O3 transistors with ID over 1.0 A/mm at VDS of 1 V are also achieved by controlling the channel thickness down to 1.0 nm at atomic layer scale. Such high current density in a relatively low mobility amorphous oxide semicondu…
Electrically driven on-chip electron sources that do not need to be heated have been long pursued because the current thermionic electron sources show the problems of high power consumption, slow temporal response, bulky size, etc., but their realization remains challenging. Here we show that a nanogap formed by two electrodes on a silicon oxide substrate functions as an electron-emitting nanodiode after the silicon oxide in the nanogap is electrically switched to a high-resistance conducting state. A nanodiode based on graphene electrodes can be turned on by a voltage of ~7 V in ~100 ns and s…
Incorporation of magnetism in graphene based compounds holds great promise for potential spintronic applications. By optimizing point defects and high edge density of defects, we report many-fold increase in the ferromagnetic saturation moment in lacey reduced graphene oxide nanoribbons (LRGONR) as compared to other graphene derivatives. The samples were synthesized using chemical unzipping methodology. Detailed structural and morphological characterizations are discussed that include XRD, Raman, SEM, HRTEM and XPS measurements. Brilluoin function analysis to magnetization data reflects best f…
