We measure the lasing dynamics of single and coupled photonic crystal nanocavity array lasers fabricated in the indium gallium arsenide phosphide material system. Under short optical excitation, single cavity lasers produce pulses as fast as 11 ps (FWHM), while coupled cavity lasers show significantly longer lasing duration which is not explained by a simple rate equations model. A Finite Difference Time Domain simulation including carrier gain and diffusion suggests that asynchronous lasing across the nanocavity array extends the laser's pulse duration.
We demonstrate single-mode lasing at telecommunication wavelengths from a circular nanocavity employing a radial Bragg reflector. Ultra-small modal volume and Sub milliwatt pump threshold level are observed for lasers with InGaAsP quantum well active membrane. The electromagnetic field is shown to be tightly confined within the 300nm central pillar of the cavity. The quality factors of the resonator modal fields are estimated to be on the order of a few thousands.
Plasmonic nanolasers have ultrahigh lasing thresholds, especially those devices for which all three dimensions are truly subwavelength. Because of a momentum mismatch between the propagating light and localized optical field of the subwavelength nanocavity, poor optical pumping efficiency is another important reason for the ultrahigh threshold but is normally always ignored. Based on a cavity-embedded nanoantenna array design, we demonstrate a room-temperature low-threshold plasmonic nanolaser that is robust, reproducible, and easy-to-fabricate using chemical-template lithography. The mode vol…
A photonic crystal (PhC) nanocavity formed in an optically very thick slab can support reasonably high-Q modes for lasing. Experimentally, we demonstrate room-temperature pulsed lasing operation from the PhC dipole mode emitting at 1324 nm, which is fabricated in an InGaAsP slab with thickness (T) of 606 nm. Numerical simulation reveals that, when T > 800 nm, over 90% of the laser output power couples to the PhC slab modes, suggesting a new route towards an efficient in-plane laser for photonic integrated circuits.
Topological edge states exist at the interfaces between two topologically-distinct materials. The presence and number of such modes are deterministically predicted from the bulk-band topologies, known as the bulk-edge correspondence. This principle is highly useful for predictably controlling optical modes in resonators made of photonic crystals (PhCs), leading to the recent demonstrations of micro-scale topological lasers. Meanwhile, zero-dimensional topological trapped states in the nanoscale remained unexplored, despite its importance for enhancing light-matter interactions and for wide app…
An unambiguous proof of lasing in an active nanocavity with ultrahigh spontaneous emission coupling factor (beta = 0.65) is presented. To distinguish the subtle lasing threshold features from possible material-related phenomena, such as saturable absorption in the gain medium, a series of active nanocavities with different values of beta have been designed to systematically approach the high-beta device. The demonstration of the lasing threshold is obtained through the observation of the transition from thermal to coherent light photon statistics that is well understood and identified in the b…
High-bit-rate nanocavity-based single photon sources in the 1,550-nm telecom band are challenges facing the development of fibre-based long-haul quantum communication networks. Here we report a very fast single photon source in the 1,550-nm telecom band, which is achieved by a large Purcell enhancement that results from the coupling of a single InAs quantum dot and an InP photonic crystal nanocavity. At a resonance, the spontaneous emission rate was enhanced by a factor of 5 resulting a record fast emission lifetime of 0.2 ns at 1,550 nm. We also demonstrate that this emission exhibits an enha…
A scalable on-chip single-photon source at telecommunications wavelengths is an essential component of quantum communication networks. In this work, we numerically construct a pulse-regulated single-photon source based on an optical parametric amplifier in a nanocavity. Under the condition of pulsed excitation, we study the photon statistics of the source using the Monte Carlo wave-function method. The results show that there exits an optimum excitation pulse width for generating high-purity single photons, while the source brightness increases monotonically with increasing excitation pulse wi…
Interest in photonic crystal nanocavities is fueled by advances in device performance, particularly in the development of low-threshold laser sources. Effective electrical control of high performance photonic crystal lasers has thus far remained elusive due to the complexities associated with current injection into cavities. A fabrication procedure for electrically pumping photonic crystal membrane devices using a lateral p-i-n junction has been developed and is described in this work. We have demonstrated electrically pumped lasing in our junctions with a threshold of 181 nA at 50K - the lowe…
We provide a numerical study showing that a bottom reflector is indispensable to achieve unidirectional emission from a photonic-crystal (PhC) nanolaser. First, we study a PhC slab nanocavity suspended over a flat mirror formed by a dielectric or metal substrate. We find that the laser's vertical emission can be enhanced by more than a factor of six compared with the device in the absence of the mirror. Then, we study the situation where the PhC nanocavity is in contact with a flat metal surface. The underlying metal substrate may serve as both an electrical current pathway and a heat sink, wh…
Efficient, low threshold, and compact semiconductor laser sources are being investigated for many applications in high-speed communications, information processing, and optical interconnects. The best edge-emitting and vertical cavity surface-emitting lasers (VCSELs) have thresholds on the order of 100 \muA[1,2] but dissipate too much power to be practical for many applications, particularly optical interconnects[3]. Optically pumped photonic crystal (PC) nanocavity lasers represent the state of the art in low-threshold lasers[4,5]; however, in order to be practical, techniques to electrically…
We report on a metasurface laser emitting at the valley extremum of a multivalley energy-momentum dispersion. Such peculiar dispersion shape is obtained by hybridizing high quality factor photonic modes of different symmetry and opposite effective mass. The lasing effect takes place at high oblique angle ($\sim$20 degrees), in the telecom wavelength range ($\sim$1580 nm), on silicon substrate and operating at room temperature. Our results show the potential of multivalley dispersion for micro-laser in integrated photonic and beam-steering applications. It also opens the way to study various fe…
The ongoing miniaturization of semiconductor lasers has enabled ultra-low threshold devices and even provided a path to approach thresholdless lasing with linear input-output characteristics. Such nanoscale lasers have initiated a discourse on the origin of the physical mechanisms involved and their boundaries, such as the required photon number, the importance of optimized light confinement in a resonator and mode-density enhancement. Here, we investigate high-$β$ metal-clad coaxial nanolasers, which facilitate thresholdless lasing. We experimentally and theoretically investigate both the con…
The ability to tune the wavelength of light emission on a silicon chip is important for scalable photonic networks, distributed photonic sensor networks and next generation computer architectures. Here we demonstrate light emission in a chip-scale optomechanical device, with wide tunablity provided by a combination of radiation pressure and photothermal effects. To achieve this, we develop an optically active double-disk optomechanical system through implantation of erbium ions. We observe frequency tuning of photoluminescence in the telecommunications band with a wavelength range of 520 pm, g…
We demonstrate channel selective 0.1-Gb/s photo-receiver operation at telecom wavelength using a silicon high-Q photonic crystal nanocavity with a laterally integrated p-i-n diode. Due to the good crystal property of silicon the measured dark current is only 15 pA. The linear and nonlinear characteristics are investigated in detail, in which we found that the photo-current is enhanced of more than 100,000 due to the ultrahigh-Q (>100,000). With the help of two-photon absorption, which is visible at a surprisingly low input power of 10 nW, the quantum efficiency of this device reaches about 10%…
We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor beta. Lasing is confirmed by measuring the second order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at 8 times the threshold power.
We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical amplification (phonon lasing), cooling, and stiffening. These sort of integrated devices offer a new means to efficiently interconvert weak microwave and optical signals, and are expected to pave the…
We experimentally demonstrated high quality factors (Q-factors) of nanocavities in three-dimensional photonic crystals by increasing the in-plane area of the structure. Entire structures made of GaAs were fabricated by a micro-manipulation technique, and the nanocavities contained InAs self-assembled quantum dots that emitted near-infrared light. The obtained Q-factor was improved to 93,000, which is 2.4-times larger than that in a previous report of a three-dimensional photonic crystal nanocavity. Due to this large Q-factor, we successfully observed a lasing oscillation from this cavity mode.
Metallic nanocavity lasers provide important technological advancement towards even smaller integrable light sources. They give access to widely unexplored lasing physics in which the distinction between different operational regimes, like those of thermal or a coherent light emission, becomes increasingly challenging upon approaching a device with a near-perfect spontaneous-emission coupling factor $β$. In fact, quantum-optical studies have to be employed to reveal a transition to coherent emission in the intensity fluctuation behavior of nanolasers when the input-output characteristic appear…
Lasing at telecommunication wavelengths from annular resonators employing radial Bragg reflectors is demonstrated at room temperature under pulsed optical pumping. Sub milliwatt pump threshold levels are observed for resonators with 0.5-1.5 wavelengths wide defects of radii 7-8 mm. The quality factors of the resonator modal fields are estimated to be on the order of a few thousands. The electromagnetic field is shown to be guided by the defect. Good agreement is found between the measured and calculated spectrum.
Raman lasers based on integrated silica whispering gallery mode resonant cavities have enabled numerous applications from telecommunications to biodetection. To overcome the intrinsically low Raman gain value of silica, these devices leverage their ultra-high quality factors (Q), allowing sub-mW stimulated Raman scattering (SRS) lasing thresholds to be achieved. A closely related nonlinear behavior to SRS is stimulated anti-Stokes Raman scattering (SARS). This nonlinear optical process combines the pump photon with the SRS photon to generate an upconverted photon. Therefore, in order to achiev…
Topological photonics has recently been proved a robust framework for manipulating light. Active topological photonic systems, in particular, enable richer fundamental physics by employing nonlinear light-matter interactions, thereby opening a new landscape for applications such as topological lasing. Here we report an all-dielectric topological insulator laser scheme based on semiconductor cavities formed by topologically distinct Kagome photonic crystals. The proposed planar semiconductor Kagome lattice allows broadband edge states below the light line due to photonic valley hall effect in t…
A pulsed regime of short-cavity, heavily erbium-doped fiber lasers is of high interest for its possible applications in telecommunications and sensorics. Here, we demonstrate these lasers in two configurations, distributed feedback laser and compare it with a classic Fabry-Perot type laser. We have managed to create lasers that function stably with cavities as small as 50 mm. Pulse properties such as amplitude, frequency and duration, are in a good agreement with our theoretical analysis, which takes into account spontaneous emission. We report the observation of the thermal switching effect, …
Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQD) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the…
Gallium phosphide offers an attractive combination of a high refractive index ($n>3$ for vacuum wavelengths up to 4 μm) and a wide electronic bandgap (2.26 eV), enabling optical cavities with small mode volumes and low two-photon absorption at telecommunication wavelengths. Heating due to strongly confined light fields is therefore greatly reduced. Here, we investigate the benefits of these properties for cavity optomechanics. Utilizing a recently developed fabrication scheme based on direct wafer bonding, we realize integrated one-dimensional photonic crystal cavities made of gallium phosphid…
Miniaturization of devices has been a primary objective in microelectronics and photonics for decades, aiming at denser integration, enhanced functionalities and drastic reduction of power consumption. Headway in nanophotonics is currently linked to the progress in concepts and technologies necessary for applications in information and communication, brain inspired computing, medicine and sensing and quantum information. Amongst all nanostructures, semiconductor photonic crystals (PhCs) occupy a prominent position as they enable the fabrication of quasi ultimate optical cavities. Low threshold…
Topological insulator lasers (TILs) are a recently introduced family of lasing arrays in which phase locking is achieved through synthetic gauge fields. These single frequency light source arrays operate in the spatially extended edge modes of topologically non-trivial optical lattices. Because of the inherent robustness of topological modes against perturbations and defects, such topological insulator lasers tend to demonstrate higher slope efficiencies as compared to their topologically trivial counterparts. So far, magnetic and non-magnetic optically pumped topological laser arrays as well …
Narrow linewidth visible light lasers are critical for atomic, molecular and optical (AMO) applications including atomic clocks, quantum computing, atomic and molecular spectroscopy, and sensing. Historically, such lasers are implemented at the tabletop scale, using semiconductor lasers stabilized to large optical reference cavities. Photonic integration of high spectral-purity visible light sources will enable experiments to increase in complexity and scale. Stimulated Brillouin scattering (SBS) is a promising approach to realize highly coherent on-chip visible light laser emission. While pro…
The missing piece in the jigsaw of silicon photonics is a light source that can be easily incorporated into the standard silicon fabrication process. Recent advances in the development of atomically thin layers of semiconducting transition metal dichalogenides (TMDs), with direct bandgaps in the near-infrared region, have opened up new possibilities for addressing this need. Here, we report a unique silicon laser source that employs molybdenum ditelluride (MoTe2) as a gain material in a photonic crystal nanocavity resonator, fabricated in silicon-on-insulator. We demonstrate optically pumped M…
Miniature semiconductor lasers have attracted a large amount of interest owing to their potential as highly integrated components in photonic circuits or in sensors. Particularly, microdisk lasers exploiting whispering gallery modes have been regarded as an important candidate because of their relatively small footprint and low threshold. However, it has been challenging for microdisk to operate under single mode operation and to lase in a preselected mode. We report subwavelength microdisk resonators suspended in air with connecting bridges and propose a simple method using the number and sym…
There has been remarkable recent progress in the formation of nano-resonators that support ultra-low-loss, compact dielectric photonic crystals with exceptional high-Q modes that operate at visible or telecom wavelengths. New insights into modal engineering have recently emerged from researchers exploring exotic electronic phases in 2D materials. The phenomenon relates to a twist in the angle between two layers of materials with high periodic spatial ordering, such as graphene. A moire pattern forms, and at a particular magic angle of twist, the electronic behavior significantly changes, enjoy…
Dissipative Kerr solitons are self-organized optical waves arising from the interplay between Kerr effect and dispersion. They can form spontaneously in nonlinear microresonators pumped with an external continuous-wave laser, which provides the parametric gain for the proliferation of an ultrastable frequency comb. These miniaturized and battery driven microcombs have become a disruptive technology for precision metrology, broadband telecommunication and ultrafast optical ranging. In this work, we report on the first experimental observation of dissipative Kerr solitons generated in a ring cav…
Four-wave mixing (FWM) is an important nonlinear optical phenomenon that underlines many of the discoveries and device applications since the laser was invented. Examples include parametric amplification, mode-locked pulses and frequency combs, and in the quantum optics regime, entangled-photon generation, squeezed-state production and optical transduction from the visible to infrared wavelengths. For quantum dot systems, the basic understanding of FWM is limited by the conventional investigation method, which concentrates on the FWM susceptibility measured with optical amplifiers. This paper …
Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth las…
