We show that, when a single relaxation time lattice Boltzmann algorithm is used to solve the hydrodynamic equations of a binary fluid for which the two components have different viscosities, strong spurious velocities in the steady state lead to incorrect results for the equilibrium contact angle. We identify the origins of these spurious currents, and demonstrate how the results can be greatly improved by using a lattice Boltzmann method based on a multiple-relaxation-time algorithm. By considering capillary filling we describe the dependence of the advancing contact angle on the interface velocity.
Contact angle is an essential physical quantity that characterizes the wettability of a substrate. Although it is widely used in the studies of surface wetting, capillary phenomena and moving contact lines, measuring contact angles in experiments and simulations is still complicated and time-consuming. In this paper, we present an efficient scheme for the real-time and on-the-spot measurement of contact angles on curved wetting surfaces in lattice Boltzmann simulations. The measuring results are in excellent agreement with the theoretical predictions by the spherical cap method without conside…
Adaptive near-contact repulsion in conservative Allen-Cahn phase-field lattice Boltzmann multiphase model
Roma Tre University（罗马第三大学）；Pontifícia Universidade Católica do Paraná（巴拉那天主教大学）；Istituto per le Applicazioni del Calcolo, Consiglio Nazionale delle Ricerche（意大利国家研究委员会计算应用研究所）；Center for Life Nano- & Neuro-Science, Fondazione Istituto Italiano di Tecnologia（意大利理工大学基金会生命纳米与神经科学中心）；PoreLab, Department of Physics, Norwegian University of Science and Technology（挪威科技大学物理系孔隙实验室）
The pseudopotential multiphase lattice Boltzmann (LB) model is a very popular model in the LB community for simulating multiphase flows. When the multiphase modeling involves a solid boundary, a numerical scheme is required to simulate the contact angle at the solid boundary. In this work, we aim at investigating the implementation of contact angles in the pseudopotential LB simulations with curved boundaries. In the pseudopotential LB model, the contact angle is usually realized by employing a solid-fluid interaction or specifying a constant virtual wall density. However, it is shown that the…
Contact angle is an essential characteristic in wetting, capillarity and moving contact line; however, although contact angle phenomena are effectively simulated, an accurate and real-time measurement for contact angle has not been well studied in computational fluid dynamics, especially in dynamic environments. Here, we design a geometry-based mesoscopic scheme to onthesport measure the contact angle in the lattice Boltzmann method. The computational results without gravity effect are in excellent agreement with the benchmarks from the spherical cap method. The qualities of the scheme are fur…
On the hydrodynamic behaviour of the immersed boundary -- lattice Boltzmann method for wetting problems
The Cyprus Institute（塞浦路斯研究所）；Tor Vergata University of Rome（罗马托维塔大学）；Télécom Paris, IP Paris（巴黎电信学院，巴黎理工学院）；CNR - Istituto per le Applicazioni del Calcolo（意大利国家研究委员会计算应用研究所）；Inria and LIX (École Polytechnique), IP Paris（法国国家信息与自动化研究所与LIX实验室（巴黎综合理工学院），巴黎理工学院）；University of Cyprus（塞浦路斯大学）
A lattice Boltzmann method for binary fluids based on mass-conserved quasi-incompressible phase-field theory
在本文中，基于准不可压缩相场模型[J.Shen et al，Comm.Comp.Phys.13，1045（2013）]，提出了用于二元流体的晶格玻尔兹曼方程（LBE）模型。与其他基于不可压相场论的不可压LBE模型相比，准不可压模型具有局部质量守恒的特点。通过一系列数值模拟验证了该模型的有效性，并与不可压LBE模型[H. Liang等人，Phys.Rev.E89，053320（2014）]。结果表明，该模型能准确地跟踪界面，在化学势分布均匀的情况下，准不可压模型和不可压模型的预测结果定性一致，在化学势分布不均匀的情况下，两者的预测结果相差较大。
In dilute gas kinetic theory, model collision dynamics such as Bhatnagar-Gross-Krook (BGK) model is often used to get a better insight and numerical modelling. BGK model and its variants assume that highly nonlinear collision term can be replaced by a simple relaxation dynamics towards Maxwell-Boltzmann distribution. Lebowitz et al., proposed an alternative framework for the collision model, known as Fokker-Planck model, where the relaxation of an arbitrary distribution towards Maxwell-Boltzmann distribution is modelled as a drift-diffusion process in velocity space. In the present manuscript,…
In the recent years the lattice Boltzmann (LB) methodology has been fruitfully extended to include the effects of thermal fluctuations. So far, all studied cases pertain equilibrium fluctuations, i.e. fluctuations with respect to an equilibrium background state. In this paper we take a step further and present results of fluctuating LB simulations of a binary mixture confined between two parallel walls in presence of a constant concentration gradient in the wall-to-wall direction. This is a paradigmatic set-up for the study of non-equilibrium (NE) fluctuations, i.e. fluctuations with respect t…
We introduce a novel mesoscopic computational model based on a multiphase-multicomponent lattice Boltzmann method for the simulation of self-phoretic particles in the presence of liquid-liquid interfaces. Our model features fully resolved solvent hydrodynamics and, thanks to its versatility, it can handle important aspects of the multiphysics of the problem, including particle wettability and differential solubility of the product in the two liquid phases. The method is extensively validated in simple numerical experiments, whose outcome is theoretically predictable, and then applied to the st…
Controlling the water contact angle on a surface is important for regulating its wettability in industrial applications, which involves developing ab initio prediction scheme of accurately predicting the angle. The scheme requires structural models for the adsorption of liquid molecules on a surface, but their reliability depend on whether the surfaces comprise insulating or metallic materials. Previous ab initio studies have focused on the estimation of the water contact angle on insulators, where the periodic-honeycomb array of water molecules was adopted as the adsorption model for the wate…
