The pseudopotential multiphase lattice Boltzmann (LB) model is a very popular model in the LB community for simulating multiphase flows. When the multiphase modeling involves a solid boundary, a numerical scheme is required to simulate the contact angle at the solid boundary. In this work, we aim at investigating the implementation of contact angles in the pseudopotential LB simulations with curved boundaries. In the pseudopotential LB model, the contact angle is usually realized by employing a solid-fluid interaction or specifying a constant virtual wall density. However, it is shown that the solid-fluid interaction scheme yields very large spurious currents in the simulations involving curved boundaries, while the virtual-density scheme produces an unphysical thick mass-transfer layer near the solid boundary although it gives much smaller spurious currents. We also extend the geometric-formulation scheme in the phase-field method to the pseudopotential LB model. Nevertheless, in comparison with the solid-fluid interaction scheme and the virtual-density scheme, the geometric-formulation scheme is relatively difficult to implement for curved boundaries and cannot be directly applied to three-dimensional space. By analyzing the features of these three schemes, we propose an improved virtual-density scheme to implement contact angles in the pseudopotential LB simulations with curved boundaries, which does not suffer from a thick mass-transfer layer near the solid boundary and retains the advantages of the original virtual-density scheme, i.e., simplicity, easiness for implementation, and low spurious currents.
The pseudopotential lattice Boltzmann (LB) model is a popular model in the LB community for simulating multiphase flows. Recently, several thermal LB models, which are based on the pseudopotential LB model and constructed within the framework of the double-distribution-function LB method, were proposed to simulate thermal multiphase flows [G. Házi and A. Márkus, Phys. Rev. E 77, 026305 (2008); L. Biferale et al., Phys. Rev. Lett. 108, 104502 (2012); S. Gong and P. Cheng, Int. J. Heat Mass Transfer 55, 4923 (2012)]. The objective of the present paper is to show that the effect of the forcing te…
We generalize to three dimensions (3D) a recently developed improved multi-component pseudopotential lattice Boltzmann method and analyze its applicability to simulate flows through realistic porous media. The model is validated and characterized via benchmarks, and we investigate its performance by simulating the displacement of immiscible fluids in 3D geometries. Two samples are considered, namely, a pack of spheres obtained numerically, and a Bentheimer sandstone rock sample obtained experimentally. We show that, with this model it is possible to simulate realistic viscosity ratios, to tune…
Owing to its conceptual simplicity and computational efficiency, the pseudopotential multiphase lattice Boltzmann (LB) model has attracted significant attention since its emergence. In this work, we aim to extend the pseudopotential LB model to simulate multiphase flows at large density ratio and relatively high Reynolds number. First, based on our recent work [Li et al., Phys. Rev. E. 86, 016709 (2012)], an improved forcing scheme is proposed for the multiple-relaxation-time pseudopotential LB model in order to achieve thermodynamic consistency and large density ratio in the model. Next, thro…
The implementation of boundary conditions is among the most challenging parts of modeling fluid flow through channels and complex media. Here, we show that the existing methods to deal with liquid-wall interactions using multicomponent Lattice Boltzmann are accurate when the wall is aligned with the main axes of the lattice but fail otherwise. To solve this problem, we extend a strategy previously developed for multiphase models. As an example, we study the coalescence of two droplets on a curved surface in two dimensions. The strategy proposed here is of special relevance for binary flows in …
In this paper, we aim to address an important issue about the pseudopotential lattice Boltzmann (LB) model, which has attracted much attention as a mesoscopic model for simulating interfacial dynamics of complex fluids, but suffers from the problem that the surface tension cannot be tuned independently of the density ratio. In the literature, a multi-range potential was devised to adjust the surface tension [Sbragaglia et al., Phys. Rev. E 75, 026702 (2007)]. However, it was recently found that the density ratio of the system will be changed when the multi-range potential is employed to adjust…
Immiscible fluid displacement in porous media occurs in several natural and industrial processes. For example, during petroleum extraction from porous rock reservoirs, water is used to displace oil. In this paper, we investigate primary drainage and imbibition in a heterogeneous porous medium using an improved numerical model based on the multicomponent pseudopotential lattice Boltzmann method. We apply recent developments from the literature and develop new pressure boundary conditions. We show that the proposed model is able to simulate realistic viscosity ratios, and it allows independent t…
In this work, a third-order Chapman-Enskog analysis of the multiple-relaxation-time (MRT) pseudopotential lattice Boltzmann (LB) model for multiphase flow is performed for the first time. The leading terms on the interaction force, consisting of an anisotropic and an isotropic term, are successfully identified in the third-order macroscopic equation recovered by the lattice Boltzmann equation (LBE), and then new mathematical insights into the pseudopotential LB model are provided. For the third-order anisotropic term, numerical tests show that it can cause the stationary droplet to become out-…
Boiling is a complex phenomenon where different non-linear physical interactions take place and for which the quantitative modeling of the mechanism involved is not fully developed yet. In the last years, many works have been published focusing on the numerical analysis of this problem. However, a lack of numerical works assessing quantitatively the sensitivity of these numerical simulations to grid parameters can be identified, especially for the Lattice Boltzmann method (LBM). The main goal of this work is to propose a mesh refinement methodology for simulating phase-change heat transfer pro…
The hyperbolic tangent function is usually used as a reliable approximation of the equilibrium density distributions of a system with phase transitions. However, analyzing the accuracies of the numerical derivatives, we find that its numerical derivatives computed by central difference method (CDM) may deviate significantly from its analytical solutions, while those computed by high-order difference method (HDM) can agree very well. Therefore, we introduce HDM to evaluate the interparticle interactions instead of popular CDM, and propose a pseudopotential multiphase lattice Boltzmann model bas…
The performances of the Color-Gradient (CG) and of the Shan-Chen (SC) multicomponent Lattice Boltzmann models are quantitatively compared side-by-side on multiple physical flow problems where breakup, coalescence and contraction of fluid ligaments are important. The flow problems are relevant to microfluidic applications, jetting of microdroplets as seen in inkjet printing, as well as emulsion dynamics. A significantly wider range of parameters is shown to be accessible for CG in terms of density-ratio, viscosity-ratio and surface tension values. Numerical stability for a high density ratio $\…
The pseudopotential method is one of the most popular extensions of the lattice Boltzmann method (LBM) for phase change and multiphase flow simulation. One attractive feature of the original proposed method consists on its simplicity of adding a force dependent on a nearest-neighbor potential function, which became known as the Shan-Chen interaction force. Some of the well known drawbacks implied by this method involves lack of thermodynamic consistency and impossibility to control the surface tension independently. In order to correct these deficiencies, different approaches were developed in…
Contact angle is an essential physical quantity that characterizes the wettability of a substrate. Although it is widely used in the studies of surface wetting, capillary phenomena and moving contact lines, measuring contact angles in experiments and simulations is still complicated and time-consuming. In this paper, we present an efficient scheme for the real-time and on-the-spot measurement of contact angles on curved wetting surfaces in lattice Boltzmann simulations. The measuring results are in excellent agreement with the theoretical predictions by the spherical cap method without conside…
We present a diffusion dominated evaporation model using the popular pseudopotential multicomponent lattice Boltzmann method introduced by Shan and Chen. With an analytical computation of the diffusion coefficients, we demonstrate that Fick's law is obeyed. We then validate the applicability of our model by demonstrating the agreement of the time evolution of the interface position of an evaporating planar film to the analytical prediction. Furthermore, we study the evaporation of a freely floating droplet and confirm that the effect of Laplace pressure is significant for predicting the time e…
Numerical Simulation of Oscillating Multiphase Heat Transfer in Parallel plates using Pseudopotential Multiple-Relaxation-Time Lattice Boltzmann Method
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To alleviate this limitation, we use a vielbein formalism to write down the Boltzmann equation on an arbitrary geometry, and solve the evolution of the fluid distribution functions using a finite differenc…
The lattice Boltzmann (LB) method has gained much success in a variety of fields involving fluid flow and/or heat transfer. In this method, the bounce-back scheme is a popular boundary scheme for treating nonslip boundaries. However, this scheme leads to staircase-shaped boundaries for curved walls. Therefore many curved boundary schemes have been proposed, but mostly suffer from mass leakage at the curved boundaries. Several correction schemes have been suggested for simulating single-phase flows, but very few discussions or studies have been made for two-phase LB simulations with curved boun…
The lattice Boltzmann method (LBM) has shown its promising capability in simulating microscale gas flows. However, the suitable boundary condition is still one of the critical issues for the LBM to model microgaseous flows involving curved geometries. In this paper, a local boundary condition of the LBM is proposed to treat curved solid walls of microgaseous flows. The developed boundary treatment combines the Maxwellian diffuse reflection scheme and a single-node boundary scheme which contains a free parameter as well as the distance ratio. The curved boundary condition is analyzed within the…
We develop a multicomponent lattice Boltzmann (LB) model for the 2D Rayleigh--Taylor turbulence with a Shan-Chen pseudopotential implemented on GPUs. In the immiscible case this method is able to accurately overcome the inherent numerical complexity caused by the complicated structure of the interface that appears in the fully developed turbulent regime. Accuracy of the LB model is tested both for early and late stages of instability. For the developed turbulent motion we analyze the balance between different terms describing variations of the kinetic and potential energies. Then, we analyze t…
We present a novel method for fluid structure interaction (FSI) simulations where an original 2nd-order curved space lattice Boltzmann fluid solver (LBM) is coupled to a finite element method (FEM) for thin shells. The LBM can work independently on a standard lattice in curved coordinates without the need for interpolation, re-meshing or an immersed boundary. The LBM distribution functions are transformed dynamically under coordinate change. In addition, force and momentum can be calculated on the nodes exactly in any geometry. Furthermore, the FEM shell is a complete numerical tool with imple…
Pool boiling characteristics in two computational domains with and without considering conjugate heat transfer (CHT) were numerically simulated by an improved hybrid pseudopotential phase-change lattice Boltzmann method (LBM). The effects of constant temperature boundary condition (BC) with nucleate spots and fluctuant temperature on the boiling process were investigated in detail. It was found that for the computational domain without CHT, the treatment of constant temperature BC with nucleate spots is quite easier to produce film boiling than the temperature BC with small fluctuation. Howeve…
We studied turbulence induced by the Rayleigh-Taylor (RT) instability for 2D immiscible two-component flows by using a multicomponent lattice Boltzmann method with a Shan-Chen pseudopotential implemented on GPUs. We compare our results with the extension to the 2D case of the phenomenological theory for immiscible 3D RT studied by Chertkov and collaborators ({\it Physical Review E 71, 055301, 2005}). Furthermore, we compared the growth of the mixing layer, typical velocity, average density profiles and enstrophy with the equivalent case but for miscible two-component fluid. Both in the miscibl…
A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach [Q. Li, K. H. Luo, and X. J. Li, Phys. Rev. E 87, 053301 (2013)]. The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid-vapor phase change. Using the model, the liquid-vapor boiling process is simulated. The boiling curve together with the three boiling stages (nucleate boiling, transition boiling, and film boiling) is numericall…
When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space of central moments (CMs) to enhance numerical stability for high Reynolds numbers. The adopted forcing scheme, consistent with the CMs-based LBM, leads to a concise yet robust algorithm. Furthermore,…
We simulate the two-dimensional fluid flow around National Advisory Committee for Aeronautics (NACA) 0012 airfoil using a hybrid lattice Boltzmann method (HLBM), which combines the standard lattice Boltzmann method with an unstructured finite-volume formulation. The aim of the study is to assess the numerical performances and the robustness of the computational method. To this purpose, after providing a convergence study to estimate the overall accuracy of the method, we analyze the numerical solution for different values of the angle of attack at a Reynolds number equal to $10^3$. Subsequentl…
In the classical multiple-relaxation-time (MRT) lattice Boltzmann (LB) method, the transformation matrix is formed by constructing a set of orthogonal basis vectors. In this paper, a theoretical and numerical study is performed to investigate the capability and efficiency of a non-orthogonal MRT-LB model for simulating multiphase flows. First, a three-dimensional non-orthogonal MRT-LB is proposed. A non-orthogonal MRT collision operator is devised based on a set of non-orthogonal basis vectors, through which the transformation matrix and its inverse matrix are considerably simplified as compar…
We propose a new way to implement Dirichlet boundary conditions for complex shapes using data from a single node only, in the context of the lattice Boltzmann method. The resulting novel method exhibits second-order convergence for the velocity field and shows similar or better accuracy than the well established Bouzidi, Firdaouss, and Lallemand (2001) boundary condition for curved walls, despite its local nature. The method also proves to be suitable to simulate moving rigid objects or immersed surfaces either with or without prescribed motion. The core idea of the new approach is to generali…
Single component pseudo-potential lattice Boltzmann models have been widely studied due to their simplicity and stability in multiphase simulations. While numerous model have been proposed, comparative analysis and advantages and disadvantages of different force schemes is often lacking. A pseudo-potential model to simulate large density ratios proposed by Kupershtokh et al. is analyzed in detail in this work. Several common used force schemes are utilized and results compared. Based on the numerical results, the relatively most accurate force scheme proposed by Guo et al. is selected and appl…
Modeling blood flow in larger vessels using lattice-Boltzmann methods comes with a challenging set of constraints: a complex geometry with walls and inlet/outlets at arbitrary orientations with respect to the lattice, intermediate Reynolds number, and unsteady flow. Simple bounce-back is one of the most commonly used, simplest, and most computationally efficient boundary conditions, but many others have been proposed. We implement three other methods applicable to complex geometries (Guo, Zheng and Shi, Phys Fluids (2002); Bouzdi, Firdaouss and Lallemand, Phys. Fluids (2001); Junk and Yang Phy…
The interpolated bounce-back scheme and the immersed boundary method are the two most popular algorithms in treating a no-slip boundary on curved surfaces in the lattice Boltzmann method. While those algorithms are frequently implemented in the numerical simulations involving complex geometries, such as particle-laden flows, their performances are seldom compared systematically over the same local quantities within the same context. In this paper, we present a systematic comparative investigation on some frequently used and most state-of-the-art interpolated bounce-back schemes and immersed bo…
Spurious currents, which are often observed near a curved interface in the multiphase simulations by diffuse interface methods, are unphysical phenomena and usually damage the computational accuracy and stability. In this paper, the origination and suppression of spurious currents are investigated by using the multiphase lattice Boltzmann method driven by chemical potential. Both the difference error and insufficient isotropy of discrete gradient operator give rise to the directional deviations of nonideal force and then originate the spurious currents. Nevertheless, the high-order finite diff…
The discrete effect on the boundary condition has been a fundamental topic for the lattice Boltzmann method in simulating heat and mass transfer problems. In previous works based on the halfway anti-bounce-back (ABB) boundary condition for convection-diffusion equations (CDEs), it is reported that the discrete effect cannot be commonly removed in the Bhatnagar-Gross-Krook (BGK) model except for a special value of relaxation time. Targeting this point in the present paper, we still proceed within the framework of BGK model for two-dimensional CDEs, and analyze the discrete effect on a non-halfw…
