Ying-Dan Wang, Yong Li, Fei Xue, C. Bruder, K. Semba
We study the role of qubit dephasing in cooling a mechanical resonator by quantum back-action. With a superconducting flux qubit as a specific example, we show that ground-state cooling of a mechanical resonator can only be realized if the qubit dephasing rate is sufficiently low.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
We propose an application of a single Cooper pair box (Josephson qubit) for active cooling of nanomechanical resonators. Latest experiments with Josephson qubits demonstrated that long coherence time of the order of microsecond can be achieved in special symmetry points. Here we show that this level of coherence is sufficient to perform an analog of the well known in quantum optics ``laser'' cooling of a nanomechanical resonator capacitively coupled to the qubit. By applying an AC driving to the qubit or the resonator, resonators with frequency of order 100 MHz and quality factors higher than …
The present state-of-the-art in cooling mechanical resonators is a version of "sideband" cooling. Here we present a method that uses the same configuration as sideband cooling --- coupling the resonator to be cooled to a second microwave (or optical) auxiliary resonator --- but will cool significantly colder. This is achieved by varying the strength of the coupling between the two resonators over a time on the order of the period of the mechanical resonator. As part of our analysis, we also obtain a method for fast, high-fidelity quantum information-transfer between resonators.
We have employed a feedback cooling scheme, which combines high-frequency mixing with digital signal processing. The frequency and damping rate of a 2 MHz micromechanical resonator embedded in a dc SQUID are adjusted with the feedback, and active cooling to a temperature of 14.3 mK is demonstrated. This technique can be applied to GHz resonators and allows for flexible control strategies.
Using a semi-classical approach, we describe an on-chip cooling protocol for a micro-mechanical resonator by employing a superconducting flux qubit. A Lorentz force, generated by the passive back-action of the resonator's displacement, can cool down the thermal motion of the mechanical resonator by applying an appropriate microwave drive to the qubit. We show that this onchip cooling protocol, with well-controlled cooling power and a tunable response time of passive back-action, can be highly efficient. With feasible experimental parameters, the effective mode temperature of a resonator could …
We present an ultrafast feasible scheme for ground state cooling of a mechanical resonator via repeated random time-interval measurements on an auxiliary flux qubit. We find that the ground state cooling can be achieved with \emph{several} such measurements. The cooling efficiency hardly depends on the time-intervals between any two consecutive measurements. The scheme is also robust against environmental noises.
Cavity cooling via quantum backaction force can extract thermal fluctuations from a mechanical resonator to reach the quantum ground state. Surface or bulk two-level-system (TLS) defects in a mechanical resonator can couple with the mechanical mode via deformation potential and affect the cooling process significantly. Here, we develop a theory to study the cavity cooling of a mechanical mode in the presence of a TLS defect using the adiabatic elimination technique. Our result shows that the cooling process depends strongly on the resonance and the damping rate of the TLS.
We study the nonequilibrium steady state of a mechanical resonator in the quantum regime realized by a suspended carbon nanotube quantum dot contacted by two ferromagnets. Because of the spin-orbit interaction and/or an external magnetic field gradient, the spin on the dot couples directly to the flexural eigenmodes. Accordingly, the nanomechanical motion induces inelastic spin flips of the tunneling electrons. A spin-polarized current at finite bias voltage causes either heating or active cooling of the mechanical modes. We show that maximal cooling is achieved at resonant transport when the …
A resonator can be effectively used as a cooler for another linear oscillator with a much smaller frequency. A huge cooling effect, which could be used to cool a mechanical oscillator below the energy of quantum fluctuations, has been predicted by several authors. However, here we show that there is a lower limit T* on the achievable temperature that was not considered in previous works and can be higher than the quantum limit in realistic experimental realizations. We also point out that the decay rate of the resonator, which previous studies stress should be small, must be larger than the de…
Sideband cooling is a technique that potentially allows mechanical resonators to be prepared in their ground states, important for future applications in quantum technologies. Tian has recently shown that side-band cooling can be implemented by modulating the coupling between a nano-resonator and a superconducting oscillator, a process of frequency conversion [L. Tian, PRB 79, 193407 (2009)]. While side-band cooling is usually treated in the steady-state regime, the effective resonant coupling will also generate near perfect state-swapping from the superconductor to the mechanical resonator. W…
We discuss two theoretical proposals for controlling the nonequilibrium steady state of nanomechanical resonators using quantum electronic transport. Specifically?, we analyse two approaches to achieve the ground-state cooling of the mechanical vibration coupled to a quantum dot embedded between (i) spin-polarised contacts or (ii) a normal metal and a superconducting contact. Assuming a suitable coupling between the vibrational modes and the charge or spin of the electrons in the quantum dot, we show that ground-state cooling of the mechanical oscillator is within the state of the art for susp…
We present a ground state cooling scheme for a nanomechanical resonator linearly coupled with a LC oscillator. The linear coupling, when periodically modulated at red detuning, up-converts the low-frequency nanomechanical mode to the high-frequency LC oscillator mode and generates backaction force that can cool the resonator to its ground state in the resolved-sideband regime. We also study the effect of the quantum backaction noise on the cooling due to the counter rotating term in the linear coupling. The scheme can be compared with laser cooling for the atomic systems and can be realized in…
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins, and electrons. Mechanical vibrations can be efficiently cooled and amplified using photons, but not with other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification, and self-oscillation using electrons. This is achieved by applying a constant (DC) current of electrons through a suspended nanotube in a dilution fridge. We demonstrate cooling down to $4.6\pm 2.0$ quanta of vibrations. We also observe self-oscillation, w…
We show that the vibrations of a nanomechanical resonator can be cooled to near its quantum ground state by tunnelling injection of electrons from an STM tip. The interplay between two mechanisms for coupling the electronic and mechanical degrees of freedom results in a bias-voltage dependent difference between the probability amplitudes for vibron emission and absorption during tunneling. For a bias voltage just below the Coulomb blockade threshold we find that absorption dominates, which leads to cooling corresponding to an average vibron population of the fundamental bending mode of 0.2.
We theoretically analyse the cooling dynamics of a high-Q mode of a mechanical resonator, when the structure is also an optical cavity and is coupled with a NV center. The NV center is driven by a laser and interacts with the cavity photon field and with the strain field of the mechanical oscillator, while radiation pressure couples mechanical resonator and cavity field. Starting from the full master equation we derive the rate equation for the mechanical resonator's motion, whose coefficients depend on the system parameters and on the noise sources. We then determine the cooling regime, the c…
We propose two measurement-based schemes to cool a nonlinear mechanical resonator down to energies close to that of its ground state. The protocols rely on projective measurements of a spin degree of freedom, which interacts with the resonator through a Jaynes-Cummings interaction. We show the performance of these cooling schemes, that can be either concatenated -- i.e. built by repeating a sequence of dynamical evolutions followed by projective measurements -- or single-shot. We characterize the performance of both cooling schemes with numerical simulations, and pinpoint the effects of decohe…
We analyze the quantum regime of the dynamical backaction cooling of a mechanical resonator assisted by a driven harmonic oscillator (cavity). Our treatment applies to both optomechanical and electromechanical realizations and includes the effect of thermal noise in the driven oscillator. In the perturbative case, we derive the corresponding motional master equation using the Nakajima-Zwanzig formalism and calculate the corresponding output spectrum for the optomechanical case. Then we analyze the strong optomechanical coupling regime in the limit of small cavity linewidth. Finally we consider…
A model for the cooling properties of a nanocantilever by a free electron beam is presented for a capacitive interaction. The optimal parameters for position sensing and cooling applications are estimated from previous experimental conditions. In particular , we demonstrate that a purely capacitive force and an electron beam stimulated internal feedback can lower the temperature of a nanocantilever by several orders of magnitude in striking contrast with the conventional electrostatic damping regime. We propose a step by step protocol to extract the interdependent parameters of the experiments…
Controlling the dynamics of mechanical resonators is central to many quantum science and metrology applications. Optomechanical control of diamond resonators is attractive owing to diamond's excellent physical properties and its ability to host electronic spins that can be coherently coupled to mechanical motion. Using a confocal microscope, we demonstrate tunable amplification and damping of a diamond nanomechanical resonator's motion. Observation of both normal mode cooling from room temperature to 80K, and amplification into self--oscillations with $60\,μ\text{W}$ of optical power is observ…
We propose a protocol to dissipatively cool a room temperature mechanical resonator using a nitrogen-vacancy (NV) center ensemble. The spin ensemble is coupled to the resonator through its orbitally-averaged excited state, which has a spin-strain interaction that has not been previously characterized. We experimentally demonstrate that the spin-strain coupling in the excited state is $13.5\pm0.5$ times stronger than the ground state spin-strain coupling. We then theoretically show that this interaction combined with a high-density spin ensemble enables the cooling of a mechanical resonator fro…
Measurement-based control has emerged as an important technique to prepare mechanical resonators in pure quantum states for applications in quantum information processing and quantum sensing. Conventionally this has required two separate channels, one for probing the motion and another one acting back on the resonator. In this work, we analyze and experimentally demonstrate a technique of single-laser feedback cooling, where one laser is used for both probing and controlling the mechanical motion. We show using an analytical model and experiments that feedback cooling is feasible in this mode …
We show a purely electronic cooling scheme to cool a charged mechanical resonator (MR) down to nearly the vibrational ground state by elaborately tuning bias gate voltages on the electrodes, which couple the MR by Coulomb interaction. The key step is the modification of time-dependent effective eigen-frequency of the MR based on the Lewis-Riesenfeld invariant. With respect to a relevant idea proposed previously [Li et al., Phys. Rev. A 83, 043803 (2011)], our scheme is simpler, more practical and completely within the reach of current technology.
We propose an approach for achieving ground-state cooling of a nanomechanical resonator (NAMR) capacitively coupled to a triple quantum dot (TQD). This TQD is an electronic analog of a three-level atom in $Λ$ configuration which allows an electron to enter it via lower-energy states and to exit only from a higher-energy state. By tuning the degeneracy of the two lower-energy states in the TQD, an electron can be trapped in a dark state caused by destructive quantum interference between the two tunneling pathways to the higher-energy state. Therefore, ground-state cooling of an NAMR can be achi…
We show that it is possible to cool a nanomechanical resonator mode to its ground state. The proposed technique is based on resonant laser excitation of a phonon sideband of an embedded quantum dot. The strength of the sideband coupling is determined directly by the difference between the electron-phonon couplings of the initial and final states of the quantum dot optical transition. Possible applications of the technique we describe include generation of non-classical states of mechanical motion.
Recent theoretical work has shown that radiation pressure effects can in principle cool a mechanical degree of freedom to its ground state. In this paper, we apply this theory to our realization of an opto-mechanical system in which the motion of mechanical oscillator modulates the resonance frequency of a superconducting microwave circuit. We present experimental data demonstrating the large mechanical quality factors possible with metallic, nanomechanical beams at 20 mK. Further measurements also show damping and cooling effects on the mechanical oscillator due to the microwave radiation fie…
Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomechanical resonator. The conductance of the SSET, which is capacitively coupled to the resonator, provides a sensitive probe of the latter's position;back-action effects manifest themselves as an effectiv…
We analyze cooling of a nano-mechanical resonator coupled to a dissipative solid state two level system focusing on the regime of high initial temperatures. We derive an effective Fokker-Planck equation for the mechanical mode which accounts for saturation and other non-linear effects and allows us to study the cooling dynamics of the resonator mode for arbitrary occupation numbers. We find a degrading of the cooling rates and eventually a breakdown of cooling at very high initial temperatures and discuss the dependence of these effects on various system parameters. Our results apply to most s…
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by modulation of the SQUID inductance. In such a tri-partite system, we analyze the steady-stat…
We study the cooling of a mechanical resonator (MR) that is capacitively coupled to a double quantum dot (DQD). The MR is cooled by the dynamical backaction induced by the capacitive coupling between the DQD and the MR. The DQD is excited by a microwave field and afterwards a tunneling event results in the decay of the excited state of the DQD. An important advantage of this system is that both the energy level splitting and the decay rate of the DQD can be well tuned by varying the gate voltage. We find that the steady average occupancy, below unity, of the MR can be achieved by changing both…
We propose an approach to cool a mechanical resonator (MR) via quantum interference in a triple quantum dot (TQD) capacitively coupled to the MR. The TQD connected to three electrodes is an electronic analog of a three-level atom in $Λ$ configuration. The electrons can tunnel from the left electrode into one of the two dots with lower-energy states, but can only tunnel out from the higher-energy state at the third dot to the right electrode. When the two lower-energy states are tuned to be degenerate, an electron in the TQD can be trapped in a superposition of the degenerate states called the …
We consider a mechanical resonator made of diamond, which contains a nitrogen-vacancy center (NV center) locating at the end of the oscillator. A second order magnetic gradient is applied and inducing coupling between mechanical modes and the NV center. By applying proper external magnetic field, the energy difference between NV center electron spin levels can be tuned to match the energy difference between two mechanical modes $a$ and $b$. A laser is used for continuously initializing the NV center electron spin. The mode $a$ with lower frequency is driven by a thermal bath. We find that the …
Enhanced Laser Cooling of a Mechanical Resonator via Zero-Photon Detection
本文提出并实验证明利用反斯托克斯光场的零光子探测将机械谐振器冷却到低于激光冷却极限，并通过外差测量验证，为量子热力学和量子态工程开辟新途径。
We have measured the backaction of a dc superconducting quantum interference device (SQUID) position detector on an integrated 1 MHz flexural resonator. The frequency and quality factor of the micromechanical resonator can be tuned with bias current and applied magnetic flux. The backaction is caused by the Lorentz force due to the change in circulating current when the resonator displaces. The experimental features are reproduced by numerical calculations using the resistively and capacitively shunted junction (RCSJ) model.
We propose and study a spin-orbit interaction based mechanism to actively cool down the torsional vibration of a nanomechanical resonator made by semiconductor materials. We show that the spin-orbit interactions of electrons can induce a coherent coupling between the electron spins and the torsional modes of nanomechanical vibration. This coherent coupling leads to an active cooling for the torsional modes via the dynamical thermalization of the resonator and the spin ensemble.
Theoretical framework for enhancing or enabling cooling of a mechanical resonator via the anti-Stokes or Stokes interaction and zero-photon detection
本文提出一个理论框架，利用零光子探测在反斯托克斯和斯托克斯相互作用下实现或增强机械谐振器冷却，并给出所需探测效率条件，可应用于非经典态制备和量子热力学等领域。
Laser cooling of mesoscopic mechanical resonators is of great interest for both fundamental studies and practical applications. We provide a general framework to describe the cavity-assisted backaction cooling in the strong coupling regime. By studying the cooling dynamics, we find that the temporal evolution of mean phonon number oscillates as a function of the optomechanical coupling strength depending on frequency mixing. The further analytical result reveals that the optimal cooling limit is obtained when the system eigenmodes satisfy the frequency matching condition. The reduced instantan…
We investigate the efficiency of cooling the vibrations of a nano-mechanical resonator, constituted by a partially suspended Carbon-nanotube and operating as double-quantum dot. The motion is brought to lower temperatures by tailoring the energy exchange via electromechanical coupling with single electrons, constantly flowing through the nanotube when a constant potential difference is applied at its extremes in the Coulomb-blockade regime. Ground-state cooling is possible at sufficiently high quality factors, provided that the dephasing rate of electron transport within the double dot does no…
We investigate the strain-induced coupling between a nitrogen-vacancy impurity and a resonant vibrational mode of a diamond nanoresonator. We show that under near-resonant laser excitation of the electronic states of the impurity, this coupling can modify the state of the resonator and either cool the resonator close to the vibrational ground state or drive it into a large amplitude coherent state. We derive a semi-classical model to describe both effects and evaluate the stationary state of the resonator mode under various driving conditions. In particular, we find that by exploiting resonant…
We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state.
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermore, we are able to extract the magnetization (1710 kA/m) of the magnetic sample, not known a priori, demonstrating this system's potential for studies of nanomagnetism. Finally, we show that we can mag…
Near-ground state cooling in electromechanics using measurement-based feedback and Josephson parametric amplifier
本文在微波光机械系统中利用近量子极限 Josephson 行波参量放大器和测量反馈，将宏观 SiN 薄膜冷却至 1.6 个声子，并揭示多音下边带不对称受 Kerr 效应主导。
We demonstrate the coupling of rare-earth ions locally implanted in a substrate (Gd$^{3+}$ in Al$_{2}$O$_{3}$) to a superconducting NbN lumped-element micro-resonator. The hybrid device is fabricated by a controlled ion implantation of rare-earth ions in well-defined micron-sized areas, aligned to lithographically defined micro-resonators. The technique does not degrade the internal quality factor of the resonators which remain above $10^{5}$. Using microwave absorption spectroscopy we observe electron-spin resonances in good agreement with numerical modelling and extract corresponding couplin…
We analyze the cooling of a mechanical resonator coupled to an ensemble of interacting two-level systems via an open quantum systems approach. Using an exact analytical result, we find optimal cooling occurs when the phonon mode is critically coupled ($γ\sim g$) to the two-level system ensemble. Typical systems operate in sub-optimal cooling regimes due to the intrinsic parameter mismatch ($γ\gg g$) between the dissipative decay rate $γ$ and the coupling factor $g$. To overcome this obstacle, we show that carefully engineering the coupling parameters through the strain profile of the mechanica…
We present a theoretical analysis of a novel cavity electromechanical system where a mechanical resonator directly modulates the damping rate kappa of a driven electromagnetic cavity. We show that via a destructive interference of quantum noise, the driven cavity can effectively act like a zero-temperature bath irrespective of the ratio kappa / omega_M, where omega_M is the mechanical frequency. This scheme thus allows one to cool the mechanical resonator to its ground state without requiring the cavity to be in the so-called `good cavity' limit kappa << omega_M.
This paper discusses a logical operation of multi-memories that consist of coupled nonlinear micro-electro-mechanical systems (MEMS) resonators. A MEMS resonator shows two coexisting stable states when nonlinear responses appear. Previous studies addressed that a micro- or nano-electrical-mechanical resonator can be utilized as a mechanical 1-bit memory or mechanical logic gates. The next phase is the development of logic system with coupled multi-resonators. From the viewpoint of application of nonlinear dynamics in coupled MEMS resonators, we show the first experimental success of the contro…
Optical cavity cooling of mechanical resonators has recently become a research frontier. The cooling has been realized with a metal-coated silicon microlever via photo-thermal force and subsequently with dielectric objects via radiation pressure. Here we report cavity cooling with a crystalline semiconductor membrane via a new mechanism, in which the cooling force arises from the interaction between the photo-induced electron-hole pairs and the mechanical modes through the deformation potential coupling. The optoelectronic mechanism is so efficient as to cool a mode down to 4 K from room tempe…
Evanescent coupling between a silica optical microbottle resonator and a GaAs electromechanical resonator is demonstrated. This coupling provides high optical sensitivity and efficient piezoelectric controllability of mechanical motion. Opto-electro-mechanical feedback control based on optomechanical detection and electromechanical control is performed in both heating and cooling regimes at room temperature. This feedback scheme can be extended to the efficient control of thermal mechanical motion in electromechanical resonators with arbitrary structures and materials.
Cooling and Squeezing a Microwave Cavity State with Magnons Using a Beam Splitter Interaction
本文提出两种几何结构在磁振子与二维微波腔模式间实现分束器相互作用，证明可实现超过裸谐振器阻尼速率的反作用阻尼及谐振器量子压缩。
We provide a detailed description of a general procedure by which a nano/micro-mechanical resonator can be calibrated using its thermal motion. A brief introduction to the equations of motion for such a resonator is presented, followed by a detailed derivation of the corresponding power spectral density (PSD) function. The effective masses for a number of different resonator geometries are determined using both finite element method (FEM) modeling and analytical calculations.
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward thermalization, dissipationless flow, and in situ tunability. We identify and quantitatively model the various dissipation mechanisms in two resonators, one fabricated from borosilicate glass and one from single crystal quartz. As the resonators are cryogenically cooled into the superfluid state, the damping from thermal effects and from the normal fluid component a…
We present measurements of a hybrid system consisting of a microwave transmission-line resonator and a lateral quantum dot defined on a GaAs heterostructure. The two subsystems are separately characterized and their interaction is studied by monitoring the electrical conductance through the quantum dot. The presence of a strong microwave field in the resonator is found to reduce the resonant conductance through the quantum dot, and is attributed to electron heating and modulation of the dot potential. We use this interaction to demonstrate a measurement of the resonator transmission spectrum u…
Scanning-probe quantum sensing of microwave and static magnetic field response of an on-chip superconducting resonator
利用扫描探针量子显微镜，通过Rabi振荡测量实现对超导谐振器微波磁场的纳米级传感，并可视化静磁场下超导涡旋的形成、演化和脱钉过程。
Magnetic cooling and vibration isolation of a sub-kHz mechanical resonator
本研究利用绝热核去磁技术在干式稀释制冷机中将硅悬臂力传感器冷却至约1 mK并实现低振动隔离，品质因子在2 mK时达约4·10^4，为探索连续自发局域化模型的新参数空间奠定基础。
Circuit quantum electrodynamics (QED) employs superconducting microwave resonators as quantum buses. In circuit QED with semiconductor quantum-dot-based qubits, increasing the resonator impedance is desirable as it enhances the coupling to the typically small charge dipole moment of these qubits. However, the gate electrodes necessary to form quantum dots in the vicinity of a resonator inadvertently lead to a parasitic port through which microwave photons can leak, thereby reducing the quality factor of the resonator. This is particularly the case for high-impedance resonators, as the ratio of…
We designed a loop-gap microwave resonator for applications of spin-based hybrid quantum systems, and tested it with impurity spins in diamond. Strong coupling with ensembles of nitrogen-vacancy (NV) centers and substitutional nitrogen (P1) centers was observed. These results show that loop-gap resonators are viable in the prospect of spin-based hybrid quantum systems, especially for an ensemble quantum memory or a quantum transducer.
We study the phenomenon of absorption refrigeration, where refrigeration is achieved by heating instead of work, in two different setups: a minimal set up based on coupled qubits, and two non-linearly coupled resonators. Considering ZZ interaction between the two qubits, we outline the basic ingredients required to achieve cooling. Using local as well as global master equations, we observe that inclusion of XX type term in the qubit-qubit coupling is detrimental to cooling. We compare the cooling effect obtained in the qubit case with that of non-linearly coupled resonators (multi-level system…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。