The importance of quantum error correction in paving the way to build a practical quantum computer is no longer in doubt. This dissertation makes a threefold contribution to the mathematical theory of quantum error-correcting codes. Firstly, it extends the framework of an important class of quantum codes -- nonbinary stabilizer codes. It clarifies the connections of stabilizer codes to classical codes over quadratic extension fields, provides many new constructions of quantum codes, and develops further the theory of optimal quantum codes and punctured quantum codes. Secondly, it contributes to the theory of operator quantum error correcting codes also called as subsystem codes. These codes are expected to have efficient error recovery schemes than stabilizer codes. This dissertation develops a framework for study and analysis of subsystem codes using character theoretic methods. In particular, this work establishes a close link between subsystem codes and classical codes showing that the subsystem codes can be constructed from arbitrary classical codes. Thirdly, it seeks to exploit the knowledge of noise to design efficient quantum codes and considers more realistic channels than the commonly studied depolarizing channel. It gives systematic constructions of asymmetric quantum stabilizer codes that exploit the asymmetry of errors in certain quantum channels.
In this paper, we show how to construct non-binary entanglement-assisted stabilizer quantum codes by using pre-shared entanglement between the sender and receiver. We also give an algorithm to determine the circuit for non-binary entanglement-assisted stabilizer quantum codes and some illustrated examples. The codes we constructed do not require the dual-containing constraint, and many non-binary classical codes, like non-binary LDPC codes, which do not satisfy the condition, can be used to construct non-binary entanglement-assisted stabilizer quantum codes.
We introduce a new primitive, called welding, for combining two stabilizer codes to produce a new stabilizer code. We apply welding to construct surface codes and then use the surface codes to construct solid codes, a variant of a 3-d toric code with rough and smooth boundaries. Finally, we weld solid codes together to produce a $(O(L^3),1,O(L^{4/3}))$ stabilizer code with an energy barrier of $O(L^{2/3})$, which solves an open problem of whether a power law energy barrier is possible for local stabilizer code Hamiltonians in three-dimensions. The previous highest energy barrier is $O(\log L)$…
We propose a scheme that converts a stabilizer code into another stabilizer code in a fault tolerant manner. The scheme first puts both codes in specific forms, and proceeds the conversion from a source code to a target code by applying Clifford gates. The Clifford gates are chosen from the comparisons between both codes. The fault tolerance of the conversion is guaranteed by quantum error correction in every step during the entire conversion process. As examples, we show three conversions: the $[[5,1,3]]$ stabilizer code and Steane code, Steane code and $[[15,1,3]]$ Reed-Muller code, and Stea…
We propose a systematic scheme for the construction of graphs associated with binary stabilizer codes. The scheme is characterized by three main steps: first, the stabilizer code is realized as a codeword-stabilized (CWS) quantum code; second, the canonical form of the CWS code is uncovered; third, the input vertices are attached to the graphs. To check the effectiveness of the scheme, we discuss several graphical constructions of various useful stabilizer codes characterized by single and multi-qubit encoding operators. In particular, the error-correcting capabilities of such quantum codes ar…
We study the automorphisms of binary stabilizer codes and states. We prove that they almost always form a solvable group, and thereby shed new light on the fact that there is no universal set of transversal gates. We also determine the connected component of the automorphism group.
We propose a systematic procedure for the construction of graphs associated with binary quantum stabilizer codes. The procedure is characterized by means of the following three step process. First, the stabilizer code is realized as a codeword-stabilized (CWS) quantum code. Second, the canonical form of the CWS code is determined and third, the input vertices are attached to the graphs. In order to verify the effectiveness of the procedure, we implement the Gottesman stabilizer code characterized by multi-qubit encoding operators for the resource-efficient error correction of arbitrary single-…
The geometric measure, the logarithmic robustness and the relative entropy of entanglement are proved to be equal for a stabilizer quantum codeword. The entanglement upper and lower bounds are determined with the generators of code. The entanglement of dual-containing CSS codes, Gottesman codes and the related codes are given. An iterative algorithm is developed to determine the exact value of the entanglement when the two bounds are not equal.
We study, by means of the stabilizer formalism, a quantum error correcting code which is alternative to the standard block codes since it embeds a qubit into a qudit. The code exploits the non-commutative geometry of discrete phase space to protect the qubit against both amplitude and phase errors. The performance of such code is evaluated on Weyl channels by means of the entanglement fidelity as function of the error probability. A comparison with standard block codes, like five and seven qubit stabilizer codes, shows its superiority.
Color codes are topological stabilizer codes with unusual transversality properties. Here I show that their group of transversal gates is optimal and only depends on the spatial dimension, not the local geometry. I also introduce a generalized, subsystem version of color codes. In 3D they allow the transversal implementation of a universal set of gates by gauge fixing, while error-detecting measurements involve only 4 or 6 qubits.
We propose a randomized variant of the stabilizer rewiring algorithm (SRA), a method for constructing a transversal circuit mapping between any pair of stabilizer codes. As gates along this circuit are applied, the initial code is deformed through a series of intermediate codes before reaching the final code. With this randomized variant, we show that there always exists a path of deformations which preserves the code distance throughout the circuit, while using at most linear overhead in the distance. Furthermore, we show that a random path will almost always suffice, and discuss prospects fo…
We present an algorithm for manipulating quantum information via a sequence of projective measurements. We frame this manipulation in the language of stabilizer codes: a quantum computation approach in which errors are prevented and corrected in part by repeatedly measuring redundant degrees of freedom. We show how to construct a set of projective measurements which will map between two arbitrary stabilizer codes. We show that this process preserves all quantum information. It can be used to implement Clifford gates, braid extrinsic defects, or move between codes in which different operations …
We investigate stabilizer codes with carrier qudits of equal dimension $D$, an arbitrary integer greater than 1. We prove that there is a direct relation between the dimension of a qudit stabilizer code and the size of its corresponding stabilizer, and this implies that the code and its stabilizer are dual to each other. We also show that any qudit stabilizer can be put in a standard, or canonical, form using a series of Clifford gates, and we provide an explicit efficient algorithm for doing this. Our work generalizes known results that were valid only for prime dimensional systems and may be…
Conventional fault-tolerant quantum error-correction schemes require a number of extra qubits that grows linearly with the code's maximum stabilizer generator weight. For some common distance-three codes, the recent "flag paradigm" uses just two extra qubits. Chamberland and Beverland (2018) provide a framework for flag error correction of arbitrary-distance codes. However, their construction requires conditions that only some code families are known to satisfy. We give a flag error-correction scheme that works for any stabilizer code, unconditionally. With fast qubit measurement and reset, it…
Stabilizer states are extensively studied in quantum information theory for their structures based on the Pauli group. Calderbank-Shor-Steane (CSS) stabilizer states are of particular importance in their application to fault-tolerant quantum computation (FTQC). However, how to fault-tolerantly prepare arbitrary CSS stabilizer states for general CSS stabilizer codes is still unknown, and their preparation can be highly costly in computational resources. In this paper, we show how to prepare a large class of CSS stabilizer states useful for FTQC. We propose distillation protocols using syndrome …
We consider a topological stabilizer code on a honeycomb grid, the "XYZ$^2$" code. The code is inspired by the Kitaev honeycomb model and is a simple realization of a "matching code" discussed by Wootton [J. Phys. A: Math. Theor. 48, 215302 (2015)], with a specific implementation of the boundary. It utilizes weight-six ($XYZXYZ$) plaquette stabilizers and weight-two ($XX$) link stabilizers on a planar hexagonal grid composed of $2d^2$ qubits for code distance $d$, with weight-three stabilizers at the boundary, stabilizing one logical qubit. We study the properties of the code using maximum-lik…
In this paper, we prove how to extend a subset of quantum stabilizer codes into a qudit hybrid code storing $\log_2 p$ classical bits over a qudit space with dimension $p$, with $p$ prime. Our proof also gives an explicit procedure for finding the entire collection of stabilizer algebras for all of the subcodes of the hybrid code. This allows extra classical information to be transmitted without having to arduously search for additional codes and their associated codewords, and also provides a first lower bound to the amount of classical information able to be transmitted in a qudit hybrid cod…
In this article we address the computational hardness of optimally decoding a quantum stabilizer code. Much like classical linear codes, errors are detected by measuring certain check operators which yield an error syndrome, and the decoding problem consists of determining the most likely recovery given the syndrome. The corresponding classical problem is known to be NP-complete, and a similar decoding problem for quantum codes is also known to be NP-complete. However, this decoding strategy is not optimal in the quantum setting as it does not take into account error degeneracy, which causes d…
A new method for the construction of the binary quantum stabilizer codes is provided, where the construction is based on Abelian and non-Abelian groups association schemes. The association schemes based on non-Abelian groups are constructed by bases for the regular representation from U6n, T4n, V8n and dihedral D2n groups. By using Abelian group association schemes followed by cyclic groups and non-Abelian group association schemes a list of binary stabilizer codes up to 40 qubits is given in tables 4, 5, and 10. Moreover, several binary stabilizer codes of distances 5 and 7 with good quantum …
We provide a detailed study of the general structure of two-dimensional topological stabilizer quantum error correcting codes, including subsystem codes. Under the sole assumption of translational invariance, we show that all such codes can be understood in terms of the homology of string operators that carry a certain topological charge. In the case of subspace codes, we prove that two codes are equivalent under a suitable set of local transformations if and only they have equivalent topological charges. Our approach emphasizes local properties of the codes over global ones.
We study the performance of common quantum stabilizer codes in the presence of asymmetric and correlated errors. Specifically, we consider the depolarizing noisy quantum memory channel and perform quantum error correction via the five and seven-qubit stabilizer codes. We characterize these codes by means of the entanglement fidelity as function of the error probability and the degree of memory. We show that their performances are lowered by the presence of correlations and we compute the error probability threshold values for codes effectiveness. Furthermore, we uncover that the asymmetry in t…
A Bacon-Shor code is a subsystem quantum error-correcting code on an $L \times L$ lattice where the $2(L-1)$ weight-$2L$ stabilizers are usually inferred from the measurements of $(L-1)^2$ weight-2 gauge operators. Here we show that the stabilizers can be measured directly and fault tolerantly with bare ancillary qubits by constructing circuits that follow the pattern of gauge operators. We then examine the implications of this method for small quantum error-correcting codes by comparing distance 3 versions of the rotated surface code and the Bacon-Shor code with the standard depolarizing mode…
Quantum codes with low-weight stabilizers known as LDPC codes have been actively studied recently due to their simple syndrome readout circuits and potential applications in fault-tolerant quantum computing. However, all families of quantum LDPC codes known to this date suffer from a poor distance scaling limited by the square-root of the code length. This is in a sharp contrast with the classical case where good families of LDPC codes are known that combine constant encoding rate and linear distance. Here we propose the first family of good quantum codes with low-weight stabilizers. The new c…
Stabilizer codes are a simple and successful class of quantum error-correcting codes. Yet this success comes in spite of some harsh limitations on the ability of these codes to fault-tolerantly compute. Here we introduce a new metric for these codes, the disjointness, which, roughly speaking, is the number of mostly non-overlapping representatives of any given non-trivial logical Pauli operator. We use the disjointness to prove that transversal gates on error-detecting stabilizer codes are necessarily in a finite level of the Clifford hierarchy. We also apply our techniques to topological code…
To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed encoding networks, and allow efficient syndrome extraction. In these codes, syndrome extraction is performed via multi-qubit stabilizer measurements, which are bit and phase parity checks up to local…
Neural networks can efficiently encode the probability distribution of errors in an error correcting code. Moreover, these distributions can be conditioned on the syndromes of the corresponding errors. This paves a path forward for a decoder that employs a neural network to calculate the conditional distribution, then sample from the distribution - the sample will be the predicted error for the given syndrome. We present an implementation of such an algorithm that can be applied to any stabilizer code. Testing it on the toric code, it has higher threshold than a number of known decoders thanks…
