In this paper we are giving a quantitative description of two different configurations for noncontact gears. We consider the solutions from a perturbative calculation for two semitransparent parallel plates and concentric cylinders both with corrugations on the inner surfaces. In the case of corrugated parallel plates we discuss results from first- and second-order perturbation calculation in the corrugation amplitudes and we will concentrate on the first-order perturbation for the case of the corrugated concentric cylinders (the second order calculation is under study), both for the weak and strong couplings. We compare the perturbative results with the results from the PFA and an exact weak coupling calculation.
The Casimir stress on two concentric spherical shell in de Sitter background for massless scalar field is calculated. The scalar field satisfies Dirichlet boundary conditions on the spheres. The metric is written in conformally flat form to make maximum use of Minkowski space calculations. Then the Casimir stress is calculated for inside and outside of the shell with different backgrounds. This model may be used to study the effect of the Casimir stress on the dynamics of the domain wall formation in inflationary models of early universe.
The Casimir interaction between two concentric corrugated cylinders provides the mechanism for non-contact gears. To this end, we calculate the Casimir torque between two such cylinders, described by $δ$-potentials, which interact through a scalar field. We derive analytic expressions for the Casimir torque for the case when the corrugation amplitudes are small in comparison to the corrugation wavelengths. We derive explicit results for the Dirichlet case, and exact results for the weak coupling limit, in the leading order. The results for the corrugated cylinders approach the corresponding ex…
The Casimir interaction between two perfectly conducting, infinite, concentric cylinders is computed using a semiclassical approximation that takes into account families of classical periodic orbits that reflect off both cylinders. It is then compared with the exact result obtained by the mode-by-mode summation technique. We analyze the validity of the semiclassical approximation and show that it improves the results obtained through the proximity theorem.
The Casimir effect giving rise to an attractive force between the closely spaced two concentric spheres that confine the massless scalar field is calculated by using a direct mode summation with contour integration in the complex plane of eigenfrequencies. We devoleped a new approach appropriate for the calculation of the Casimir energy for spherical boundary conditions. The Casimir energy for a massless scalar field between the closely spaced two concentric spheres coincides with the Casimir energy of the parallel plates for a massless scalar field in the limit when the dimensionless paramete…
The Casimir interaction energy due to the vacuum fluctuations of a massive vector field between two perfectly conducting concentric spherical bodies is computed. The TE contribution to the Casimir interaction energy is a direct generalization of the massless case but the TM contribution is much more complicated. Each TM mode is a linear combination of a transverse mode which is the generalization of a TM mode in the massless case and a longitudinal mode that does not appear in the massless case. In contrast to the case of two parallel perfectly conducting plates, the are no TM discrete modes t…
This paper is devoted to the presentation of the lateral Casimir force between two sinusoidally corrugated eccentric cylinders. Despite that applying scattering matrix method explains the problem exactly, procedure of applying this method is somehow complicated specially at nonzero temperature. Using the proximity force approximation (PFA) helps to achieve the lateral Casimir force in a truly explicit manner. We assume the cylinders to be slightly eccentric with similar radiuses and separations much smaller than corrugations' wave length for the validity of PFA. For such short distances the ef…
The Casimir energy for a massless scalar field between the closely spaced two concentric D-dimensional (for D>3) spheres is calculated by using the mode summation with contour integration in the complex plane of eigenfrequencies and the generalized Abel-Plana formula for evenly spaced eigenfrequency at large argument. The sign of the Casimir energy between closely spaced two concentric D-dimensional spheres for a massless scalar field satisfying the Dirichlet boundary conditions is strictly negative. The Casimir energy between D-1 dimensional surfaces close to each other is regarded as interes…
We consider the finite temperature Casimir effect between two concentric spheres due to the vacuum fluctuations of the electromagnetic field in the $(D+1)$-dimensional Minkowski spacetime. Different combinations of perfectly conducting and infinitely permeable boundary conditions are imposed on the spheres. The asymptotic expansions of the Casimir free energies when the dimensionless parameter $\vep$, the ratio of the distance between the spheres to the radius of the smaller sphere, is small are derived in both the high temperature region and the low temperature region. It is shown that the le…
We calculate the lateral Casimir force between corrugated parallel plates, described by $δ$-function potentials, interacting through a scalar field, using the multiple scattering formalism. The contributions to the Casimir energy due to uncorrugated parallel plates is treated as a background from the outset. We derive the leading- and next-to-leading-order contribution to the lateral Casimir force for the case when the corrugation amplitudes are small in comparison to corrugation wavelengths. We present explicit results in terms of finite integrals for the case of the Dirichlet limit, and exac…
We derive explicit analytic expressions for the lateral force for two different configurations with corrugations, parallel plates and concentric cylinders. By making use of the multiple scattering formalism, we calculate the force for a scalar field under the influence of a delta-function potential that has sinusoidal dependence in one direction simulating the corrugations. By making a perturbative expansion in the amplitude of the corrugation we find the leading order for the corrugated concentric cylinders and the next-to-leading order for the corrugated parallel plates.
We study the vacuum interaction of a scalar field and two concentric spheres defined by a singular potential on their surfaces. The potential is a linear combination of the Dirac-$δ$ and its derivative. The presence of the delta prime term in the potential causes that it behaves differently when it is seen from the inside or from the outside of the sphere. We study different cases for positive and negative values of the delta prime coupling, keeping positive the coupling of the delta. As a consequence, we find regions in the space of couplings, where the energy is positive, negative or zero. M…
We use a point-matching approach to numerically compute the Casimir interaction energy for a two perfect-conductor waveguide of arbitrary section. We present the method and describe the procedure used to obtain the numerical results. At first, our technique is tested for geometries with known solutions, such as concentric and eccentric cylinders. Then, we apply the point-matching technique to compute the Casimir interaction energy for new geometries such as concentric corrugated cylinders and cylinders inside conductors with focal lines.
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
The lateral Casimir force between two corrugated metallic plates makes possible a study of the nontrivial interplay of geometry and Casimir effect appearing beyond the regime of validity of the Proximity Force Approximation (PFA). Quantitative evaluations can be obtained by using scattering theory in a perturbative expansion valid when the corrugation amplitudes are smaller than the three other length scales: the mean separation distance $L$ of the plates, the corrugation period $λ_\C$ and the plasma wavelength $λ_¶$. Within this perturbative expansion, evaluations are obtained for arbitrary r…
We numerically evaluate the Casimir interaction energy for configurations involving two perfectly conducting eccentric cylinders and a cylinder in front of a plane. We consider in detail several special cases. For quasi-concentric cylinders, we analyze the convergence of a perturbative evaluation based on sparse matrices. For concentric cylinders, we obtain analytically the corrections to the proximity force approximation up to second order, and we present an improved numerical procedure to evaluate the interaction energy at very small distances. Finally, we consider the configuration of a cyl…
In this paper we investigate the vacuum polarization effects associated with a massive fermionic field due to the non-trivial topology of the global monopole spacetime and boundary conditions imposed on this field. Specifically we investigate the vacuum expectation values of the energy-momentum tensor and fermionic condensate admitting that the field obeys the MIT bag boundary condition on two concentric spherical shells. In order to develop this analysis, we use the generalized Abel-Plana summation, which allows to extract from the vacuum expectation values the contribution coming from a sing…
The quantum vacuum effects are investigated for a massive scalar field with general curvature coupling and obeying the Robin boundary conditions given on two concentric spherical shells with radii $a $ and $b$ in the $D+1$-dimensional global monopole background. The expressions are derived for the Wightman function, the vacuum expectation values of the field square, the vacuum energy density, radial and azimuthal stress components in the region between the shells. A regularization procedure is carried out by making use of the generalized Abel-Plana formula for the series over zeros of combinat…
We review recent work on the Casimir interaction energy between cylindrical shells. We include proposals for future experiments involving cylinders, such us a null experiment using quasi-concentric cylinders, a cylinder in front a conducting plate, and a cylindrical version of the rack and pinion powered by Casimir lateral force. We also present an exact formula for the theoretical evaluation of the vacuum interaction energy between eccentric cylindrical shells, and describe improved analytical and numerical evaluations for the particular case of concentric cylinders.
We derive a simplified general expression for the two-body scalar Casimir energy in generalized separable coordinate systems. We apply this technique to the case of radial semi-transparent planes in the annular region between two concentric Dirichlet cylinders. This situation is explored both analytically and numerically.
In this work, we consider a torque caused by the well known quantum mechanical Casimir effect arising from quantized field fluctuations between plates with inhomogeneous, sharply discontinuous, dielectric properties. While the Casimir effect is a relatively well understood phenomenon, systems resulting in lateral or rotational forces are far less developed; to our knowledge, a theoretical study of discontinuous dielectric variants of such systems has not been attempted. We utilize a Proximity Force Approximation in conjunction with the Lifshitz dielectric formula to perform theoretical analyse…
We calculate the exact Casimir interaction energy between two perfectly conducting, very long, eccentric cylindrical shells using a mode summation technique. Several limiting cases of the exact formula for the Casimir energy corresponding to this configuration are studied both analytically and numerically. These include concentric cylinders, cylinder-plane, and eccentric cylinders, for small and large separations between the surfaces. For small separations we recover the proximity approximation, while for large separations we find a weak logarithmic decay of the Casimir interaction energy, typ…
The Casimir free energy for a system of two dielectric concentric nonmagnetic spherical bodies is calculated with use of a quantum statistical mechanical method, at arbitrary temperature. By means of this rather novel method, which turns out to be quite powerful (we have shown this to be true in other situations also), we consider first an explicit evaluation of the free energy for the static case, corresponding to zero Matsubara frequency ($n=0$). Thereafter, the time-dependent case is examined. For comparison we consider the calculation of the free energy with use of the more commonly known …
The Casimir effect continues to be a subject of discussion regarding its relationship, or the lack of it, with the vacuum energy of fluctuating quantum fields. In this note, we propose a Gedankenexperiment considering an imaginary process similar to a vacuum fluctuation in a typical static Casimir set up. The thought experiment leads to intriguing conclusions regarding the minimum distance between the plates when approaching the Planck scale. More specifically, it is found that distance between the plates cannot reach a value below $(L/L_P)^{2/3}$ Planck lengths, being $L_P$ the Planck length …
For more than 35 years theorists have studied quantum or Casimir friction, which occurs when two smooth bodies move transversely to each other, experiencing a frictional dissipative force due to quantum electromagnetic fluctuations, which break time-reversal symmetry. These forces are typically very small, unless the bodies are nearly touching, and consequently such effects have never been observed, although lateral Casimir forces have been seen for corrugated surfaces. Partly because of the lack of contact with phenomena, theoretical predictions for the frictional force between parallel plate…
We explore the non-linear dynamics of two parallel periodically patterned metal surfaces that are coupled by the zero-point fluctuations of the electromagnetic field between them. The resulting Casimir force generates for asymmetric patterns with a time-periodically driven surface-to-surface distance a ratchet effect, allowing for directed lateral motion of the surfaces in sizeable parameter ranges. It is crucial to take into account inertia effects and hence chaotic dynamics which are described by Langevin dynamics. Multiple velocity reversals occur as a function of driving, mean surface dist…
We want to study the Casimir effect for a single conducting microscopic cylindrical cavity. The mathematical technique is based on the Green function of the geometry of the inside of the cavity, and the integral regularization is based on the plasma frequency cutoff for real conductors. Using the symmetric electromagnetic energy-momentum tensor, in terms of four potential, the total Casimir energy for the inside of the Cavity is calculated. Neglecting the contribution of the external (outside of the cavity) Casimir energy based on the reason recently presented in [1], the forces experienced by…
We report stronger constraints on the parameters of Yukawa-type corrections to Newtonian gravity from measurements of the lateral Casimir force between sinusoidally corrugated surfaces of a sphere and a plate. In the interaction range from 1.6 to 14 nm the strengthening of previously known high confidence constraints up to a factor of $2.4\times 10^7$ is achieved using these measurements. It is shown that the replacement of a plane plate with a corrugated one in the measurements of the normal Casimir force by means of an atomic force microscope would result in the strengthening of respective h…
Systems with an O(n) symmetrical Hamiltonian are considered in a $d$-dimensional slab geometry of macroscopic lateral extension and finite thickness $L$ that undergo a continuous bulk phase transition in the limit $L\to\infty$. The effective forces induced by thermal fluctuations at and above the bulk critical temperature $T_{c,\infty}$ (thermodynamic Casimir effect) are investigated below the upper critical dimension $d^*=4$ by means of field-theoretic renormalization group methods for the case of periodic and special-special boundary conditions, where the latter correspond to the critical en…
We consider systems confined to a $d$-dimensional slab of macroscopic lateral extension and finite thickness $L$ that undergo a continuous bulk phase transition in the limit $L\to\infty$ and are describable by an O(n) symmetrical Hamiltonian. Periodic boundary conditions are applied across the slab. We study the effects of long-range pair interactions whose potential decays as $b x^{-(d+σ)}$ as $x\to\infty$, with $2<σ<4$ and $2<d+σ\leq 6$, on the Casimir effect at and near the bulk critical temperature $T_{c,\infty}$, for $2<d<4$. For the scaled reduced Casimir force per unit cross-sectional a…
We study the Casimir friction due to the relative, uniform, lateral motion of two parallel semitransparent mirrors coupled to a vacuum real scalar field, $ϕ$. We follow a functional approach, whereby nonlocal terms in the action for $ϕ$, concentrated on the mirrors' locii, appear after functional integration of the microscopic degrees of freedom. This action for $ϕ$, which incorporates the relevant properties of the mirrors, is then used as the starting point for two complementary evaluations: Firstly, we calculate the { in-out} effective action for the system, which develops an imaginary part…
