Experimental and theoretical results on chemical functionalization of graphene are reviewed. Using hydrogenated graphene as a model system, general principles of the chemical functionalization are formulated and discussed. It is shown that, as a rule, 100% coverage of graphene by complex functional groups (in contrast with hydrogen and fluorine) is unreachable. A possible destruction of graphene nanoribbons by fluorine is considered. The functionalization of infinite graphene and graphene nanoribbons by oxygen and by hydrofluoric acid is simulated step by step.
A new model for graphene, epitaxially grown on silicon carbide is proposed. Density functional theory modelling of epitaxial graphene functionalization by hydrogen, fluorine and phenyl groups has been performed with hydrogen and fluorine showing a high probability of cluster formation in high adatom concentration. It has also been shown that the clusterization of fluorine adatoms provides midgap states in formation due to significant flat distortion of graphene. The functionalization of epitaxial graphene using larger species (methyl and phenyl groups) renders cluster formation impossible, due…
We investigated theoretically the effect of covalent edge functionalization, with organic functional groups, on the electronic properties of graphene nanostructures and nano-junctions. Our analysis shows that functionalization can be designed to tune electron affinities and ionization potentials of graphene flakes, and to control the energy alignment of frontier orbitals in nanometer-wide graphene junctions. The stability of the proposed mechanism is discussed with respect to the functional groups, their number as well as the width of graphene nanostructures. The results of our work indicate t…
We investigate the functionalization of functional groups to graphene nanoribbons with zigzag and armchair edges using first principles calculations. We find that the formation energy for the configuration of the functional groups functionalized to the zigzag edge is ~0.2 eV per functional group lower than that to the armchair edge. The formation energy difference arises from a structural deformation on the armchair edge by the functionalization whereas there is no structural deformation on the zigzag edge. Selective functionalization on the zigzag edge takes place at a condition of the temper…
Using the ab initio pseudopotential density functional method, we investigate the functionalization of halogen molecules into graphene-based nanostructures with zigzag and armchair edges. We find that halogen molecules adsorb through chemisorption on the zigzag edge carbon atoms with a binding energy of ~1-5 eV and their adsorption on a perfect zigzag edge is preferred, in sharp contrast to physisorption on the armchair edge and elsewhere where they adsorb with a binding energy of ~0.07 eV. We suggest that our findings would be utilized for an approach to the separation of zigzag graphene nano…
Defects change essentially not only electronic but also chemical properties of graphene being centers of its chemical activity. Their functionalization is a way to modify electronic and crystal structure of graphene which may be important for graphene-based nanoelectronics. Using hydrogen as an example, we have simulated a chemistry of imperfect graphene for a broad class of defects (Stone-Wales defects, bivacancy, nitrogen substitution impurity, and zigzag edges) by density functional calculations. We have studied also an effect of finite width of graphene nanoribbons on their chemical proper…
Opening, in a controllable way, the energy gap in the electronic spectrum of graphene is necessary for many potential applications, including an efficient carbon-based transistor. We have shown that this can be achieved by chemical functionalization of bilayer graphene. Using various dopants, such as H, F, Cl, Br, OH, CN, CCH, NH2, COOH, and CH3 one can vary the gap smoothly between 0.64 and 3 eV and the state with the energy gap is stable corresponding to the lowest-energy configurations. The peculiarities of the structural properties of bilayer graphene in comparison with bulk graphite are d…
Using the density functional theory, we have demonstrated the chemical functionalization of semiconducting graphene nanoribbons (GNRs) with Stone-Wales (SW) defects by carboxyl (COOH) groups. It is found that the geometrical structures and electronic properties of the GNRs changed significantly, and the electrical conductivity of the system could be considerably enhanced by mono-adsorption and double-adsorption of COOH, which sensitively depends upon the axial concentration of SW defects COOH pairs (SWDCPs). With the increase of the axial concentration of SWDCPs, the system would transform fro…
In this article, based on first-principles calculations, we systematically study functionalization induced diamonization of graphene bilayer and graphene-BN hybrid bilayer. With single-side functionalization, the diamondized structures are magnetic semiconductor. Interestingly, if both sides of the bilayer are functionalized, diamondization becomes spontaneous without a barrier. On the other hand, when the bottom layer of the bilayer graphene is replaced by a single hexagonal BN layer, the diamondized structure becomes nonmagnetic metal. The tunable electronic and magnetic properties pave new …
DFT calculation of various atomic species on graphene sheet is investigated as prototypes for formation of nano-structures on carbon nanotube (CNT) wall. We investigate computationally adsorption energies and adsorption sites on graphene sheet for a lot of atomic species including transition metals, noble metals, nitrogen and oxygen, using the DFT calculation as a prototype for CNT. The suitable atomic species can be chosen as each application from those results. The calculated results show us that Mo and Ru are bounded strongly on graphene sheet with large diffusion barrier energy. On the oth…
For the first time bis-functionalization of graphene employing two successive reduction and covalent bond formation steps are reported. Both bulk functionalization in solution and functionalization of individual sheets deposited on surfaces have been carried out. Whereas in the former case attacks from both sides of the basal plane are possible and can lead to strain-free architectures, in the latter case, retro-functionalizations can get important when the corresponding anion of the addend represents a sufficiently good leaving group.
The flexoelectric and electronic properties of zig-zag graphene nanoribbons are explored under mechanical bending using state of the art first principles calculations. A linear dependence of the bending induced out of plane polarization on the applied strain gradient is found. The inferior flexoelectric properties of graphene nanoribbons can be improved by more than two orders of magnitude by hydrogen and fluorine functionalization (CH and CF nanoribbons). A large out of plane flexoelectric effect is predicted for CF nanoribbons. The origin of this enhancement lies in the electro-negativity di…
Organic functionalization of graphene is successfully performed via 1,3-dipolar cycloaddition of azomethine ylide in the liquid phase. The comparison between 1-methyl-2-pyrrolidinone and N,N-dimethylformamide as dispersant solvents, and between sonication and homogenization as dispersion techniques, proves N,N-dimethylformamide and homogenization as the most effective choice. The functionalization of graphene nanosheets and reduced graphene oxide is confirmed using different techniques. Among them, energy-dispersive X-ray spectroscopy allows to map the pyrrolidine ring of the azomethine ylide …
The stability, electronic and optical properties of single-walled carbon nanotubes (CNTs) and graphene noncovalently functionalized with free-base tetraphenylporphyrin (TPP) molecules is addressed by density functional theory calculations, including corrections to dispersive interactions. We study the TPP physisorption on 42 CNT species, particularly those with chiral indices ($n$,$m$), where $5 \leq n \leq 12$ and $0\leq m\leq n$. Our results show a quite strong $π$-$π$ interaction between TPP and the CNT surface, with binding energies ranging from 1.1 to 1.8 eV, where higher energies can be …
The covalent functionalization of graphene represents a main topic in the growing field of nano materials. The reductive exfoliation of graphite with concomitant functionalization of the respective graphenide intermediates provides a promising approach towards functional graphene derivatives. In this article, we present new insights into the reductive arylation of graphene. Graphite intercalation compounds (GICs) with varying stoichiometries have been used as starting materials. Based on the spectroscopic data obtained by scanning Raman microscopy (SRM) and thermogravimetric analysis coupled t…
An electrospun membrane for vascular stent coating made of 2-methacryloyloxyethyl phosphorylcholine and butyl methacrylate copolymer (MPC-co-BMA), also known as (PMB), reinforced with functionalized and nitrogen doped reduced graphene oxide (f-NrGO) is presented. This membrane due to the nitrogen doped reduced graphene oxide (NrGO) negative electric charge has the capacity to repeal low density lipoproteins (LDL), which under specific conditions are the main cause of atherosclerotic disease. The NrGO functionalization process is detailed, as it creates strong bonds between NrGO and PMB, avoidi…
Opening a band gap and realizing static valley control have been long sought after in graphenebased two-dimensional (2D) materials. Motivated by the recent success in synthesizing 2D materials passivated by Si-N layers, here, we propose two new graphene-based materials, 2D C2SiN and CSiN, via first-principles calculations. Monolayer C2SiN is metallic and realizes superconductivity at low temperatures. Monolayer CSiN enjoys excellent stability and mechanical property. It is a semiconductor with a ternary valley structure for electron carriers. Distinct from existing valleytronic platforms, thes…
Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated transmission electron microscopy (TEM) samples, either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled,…
Chemical functionalization is an effective means to tune electronic and crystal structure of two-dimensional material, which may be crucial for moder microelectronics industry. Based on the first-principle calculation and an iterative solution of Boltzmann transport equation, we find that antimony films are potential excellent thermoelectrical materials with rather low thermal conductivities $k$ ($<$ 2.5 W/mK). The chemical functionalization can induce the reduction in $k$ to some extent, which is mainly due to the reduction of phonon lifetimes limited by the anharmonic scattering. More intere…
While the basal plane of graphene is inert, defects in it are centers of chemical activity. An attractive application of such defects is towards controlled functionalization of graphene with foreign molecules. However, the interaction of the defects with reactive environment, such as ambient, decreases the efficiency of functionalization and makes it poorly controlled. Here, we report a novel approach to generate, monitor with time resolution, and functionalize the defects $\textit{in situ}$ without ever exposing them to the ambient. The defects are generated by an energetic Argon plasma and t…
Functionalization of atomically thin nanomaterials enables the tailoring of their chemical, optical, and electronic properties. Exfoliated black phosphorus, a layered two-dimensional semiconductor exhibiting favorable charge carrier mobility, tunable bandgap, and highly anisotropic properties, is chemically reactive and degrades rapidly in ambient conditions. In contrast, here we show that covalent aryl diazonium functionalization suppresses the chemical degradation of exfoliated black phosphorus even following weeks of ambient exposure. This chemical modification scheme spontaneously forms ph…
Here we present an angle-resolved photoelectron spectroscopy (ARPES), x-ray absorption spec-troscopy (XAS), and density-functional theory (DFT) investigations of water and ammonia ad-sorption on graphene/Ni(111). Our results on graphene/Ni(111) reveal the existence of interface states, originating from the strong hybridization of the graphene π and spin-polarized Ni 3d valence band states. ARPES and XAS data of the H2O (NH3)/graphene/Ni(111) system give an information about the kind of interaction between adsorbed molecules and graphene on Ni(111). The presented experimental data are compared …
Covalently functionalizing mechanical exfoliated monolayer and bilayer graphenides with λ-iodanes led to the discovery that the monolayers supported on a SiO2 substrate are considerably more reactive than bilayers as demonstrated by statistical Raman spectroscopy/microscopy. Supported by DFT calculations we show that ditopic addend binding leads to much more stable products than the corresponding monotopic reactions due to much lower lattice strain of the reactions products. The chemical nature of the substrate (graphene versus SiO2) plays a crucial role.14858-14862.
Low-cost graphene sponge electrodes were functionalized with two-dimensional (2D) materials, i.e., borophene and hexagonal boron nitride (hBN), using a one-step, hydrothermal self-assembly method. Borophene and hBN-modified graphene sponge anode and N-doped graphene sponge cathode were employed for electrochemical degradation of model persistent contaminants of emerging concern in one-pass, flow through mode, and using low-conductivity supporting electrolyte. Functionalization of the reduced graphene oxide (RGO) coating with 2D materials led to specific modifications in the electrode electroca…
Graphene is a material of great potential in a broad range of applications, for each of which specific tuning of the materials properties is required. This can be achieved, for example, by covalent functionalization. We have exploited two protocols for surface grafting, either by diazonium salts or by nucleophilic exchange, to perform graphene covalent modification directly on a copper substrate, which is routinely used for the synthesis of the material, and investigated the difference in reactivity compared with other substrates. The successful functionalization was confirmed by Raman and sur…
The monolayer form of CVD graphene is imposing crucial challenges in characterization of the targeted covalent functionalization due to the low amount of grafting moieties on the surface, which in turn hampers drawing conclusions about reactivity-properties relationships. Due to the growing interest in chemically modified graphene new, reliable and non-destructive methods for its characterization are critically required. Herein we demonstrate the use of surface-enhanced infrared absorption spectroscopy for detection of characteristic vibration modes of species being grafted to the material eit…
Anchoring various functional groups to graphene is the most versatile approach for tailoring its functional properties. To date, one must use a special tunneling microscope for attaching a molecule at a specific position on the graphene with resolution better than several hundred nanometers, however, achieving this resolution is impossible on a large scale. We demonstrate for the first time that chemical functionalization can be achieved with nanometer resolution by introducing strain with nanometer scale modulation into a graphene layer. The spatial distribution of the strain has been achieve…
By using first-principles calculations, we investigated the effects of graphene/boron nitride (BN) encapsulation, surface functionalization by metallic elements (K, Al, Mg and typical transition metals) and molecules (tetracyanoquinodimethane (TCNQ) and tetracyanoethylene (TCNE)) on the electronic properties of layered indium selenide (InSe). It was found that an opposite trend of charge transfer is possible for graphene (donor) and BN (acceptor), which is dramatically different from phosphorene where both graphene and BN play the same role (donor). For InSe/BN heterostructure, a change of the…
The production of multiple types of graphene, such as free standing, epitaxial graphene on silicon carbide and metals, graphene in solution, chemically grown graphene-like molecules, various graphene nanoribbons, and graphene oxide with different levels of reduction and various chemical composition, demonstrate the need for additional investigation beyond the basic principles of graphene functionalization for avoidance of occasionally contradictions between the predictions from first-principles simulations and experimental results. Herein, we discuss the current state of modeling of the differ…
Enhancement of the chemical activity of graphene is evidenced by first-principles modelling of chemisorption of the hydrogen, fluorine, oxygen and hydroxyl groups on strained graphene. For the case of negative strain or compression, chemisorption of the single hydrogen, fluorine or hydroxyl group is energetically more favourable than those of their pairs on different sublattices. This behaviour stabilizes the magnetism caused by the chemisorption being against its destruction by the pair formations. Initially flat, compressed graphene is shown to buckle spontaneously right after chemisorption …
Band gap tuning and dielectric properties of small organic ligands adsorbed on tin monolayers (stanene) have been investigated using first-principles calculations. Charge density analysis using density-functional theory shows that the ligands are chemisorbed on stanene and some of the groups can open a band gap in the originally metallic statene. Furthermore many-body GW calculations demonstrate that the dielectric properties of bare and ligand adsorbed stanene have a large anisotropy. Our findings of a finite gap opens a path for rational theoretical design of functionalized two-dimensional s…
Two dimensional materials are important for electronics applications. A natural way for electronic structure engineering on two dimensional systems is on-plane chemical functionalization. Based on density functional theory, we study the electronic structures of fluorine substituted planar polysilane and graphane. We find that carbon and silicon present very different surface chemistry. The indirect energy gap of planar polysilane turns to be direct upon fluorine decoration, and the gap width is mainly determined by fluorine coverage regardless of its distribution on the surface. However, elect…
Kane and Mele predicted that in presence of spin-orbit interaction graphene realizes the quantum spin Hall state. However, exceptionally weak intrinsic spin-orbit splitting in graphene ($\approx 10^{-5}$ eV) inhibits experimental observation of this topological insulating phase. To circumvent this problem, we propose a novel approach towards controlling spin-orbit interactions in graphene by means of covalent functionalization of graphene edges with functional groups containing heavy elements. Proof-of-concept first-principles calculations show that very strong spin-orbit coupling can be induc…
To achieve high thermal conductivity (k) of polymer graphene nanocomposites, it is critically important to achieve efficient thermal coupling between graphene and its surrounding polymers through effective functionalization schemes. In this work, we demonstrate that edge-functionalization of graphene nanoplatelets (GnPs) can enable a larger enhancement of effective thermal conductivity in polymer-graphene nanocomposites, relative to basal plane functionalization. Effective thermal conductivity for edge case is predicted, through molecular dynamics simulations, to be up to 48% higher relative t…
Monolayer graphene was deposited on a Si wafer substrate decorated with SiO2 nanoparticles (NPs) and then exposed to aryl radicals that were generated in situ from their diazonium precursors. Using micro-Raman mapping, the aryl radicals were found to selectively react with the regions of graphene that covered the NPs. The enhanced chemical reactivity was attributed to the increased strain energy induced by the local mechanical deformation of the graphene.
Simulation of chemical activity of corrugated graphene within density functional theory predicts an enhancement of its chemical activity if the ratio of height of the corrugation (ripple) to its radius is larger than 0.07. Further growth of the curvature of the ripples results in appearance of midgap states which leads to an additional strong increase of chemisororption energy. These results open a way for tunable functionalization of graphene, namely, depending of curvature of the ripples one can provide both homogeneous (for small curvatures) and spot-like (for large curvatures) functionaliz…
A simple method is developed to synthesize gram quantities of uniform Ge nanowires (GeNWs) by chemical vapor deposition on preformed, monodispersed seed-particles loaded onto high surface area silica support. Various chemical functionalization schemes are investigated to passivate the GeNW surfaces using alkanethiols and alkyl Grignard reactions. The stability of functionalization against oxidation of germanium for various alkyl chain lengths is elucidated by X-ray photoelectron spectroscopy. Among all schemes tested, long chain alkanethiols (>=C12) are found to impart the most stable GeNW pas…
In this paper, we have studied functionalization of 5-7 edge-reconstructed graphene nanoribbons by ab initio density functional calculations. Our studies show that hydrogenation at the reconstructed edges is favorable in contrast to the case of unreconstructed 6-6 zigzag edges, in agreement with previous theoretical results. Thermodynamical calculations reveal the relative stability of single and dihydrogenated edges under different temperatures and chemical potential of hydrogen gas. From phonon calculations, we find that the lowest optical phonon modes are hardened due to 5-7 edge reconstruc…
Based on a low temperature scanning tunneling microscopy study, we present a direct visualization of a cycloaddition reaction performed for some specific fluorinated maleimide molecules deposited on graphene. These studies showed that the cycloaddition reactions can be carried out on the basal plane of graphene, even when there are no pre-existing defects. In the course of covalently grafting the molecules to graphene, the sp2 conjugation of carbon atoms was broken and local sp3 bonds were created. The grafted molecules perturbed the graphene lattice, generating a standing-wave pattern with an…
Using ab initio density functional theory and quantum transport calculations based on nonequilibrium Green's function formalism we study structural, electronic, and transport properties of hydrogen-terminated short graphene nanoribbons (graphene flakes) and their functionalization with vanadium atoms. Rectangular graphene flakes are stable, having geometric and electronic structures quite similar to that of extended graphene nanoribbons. We show that a spin-polarized current can be produced by pure, hydrogenated rectangular graphene flakes by exploiting the spatially-separated edge states of t…
A novel type of a graphene/porphyrin hybrid with a direct covalent linker between graphene and a nickel(II) tetraphenylporphyrin unit has successfully been synthesized by the reductive exfoliation/functionalization of potassium intercalated graphite as starting material. Moreover, we directly compared the reactivity of two structurally different porphyrin derivatives, namely, meso-NiTPP-N2+, with the diazonium group in 4-position of a peripheral phenyl ring and a novel \b{eta} NiTPP N2+ diazonium cation, where the diazonium group is directly attached to the \b{eta}-pyrrolic position of the 18 …
The edge-functionalization of graphene nanoplatelets (GnP) was carried out exploiting diazonium chemistry, aiming at the synthesis of edge decorated nanoparticles to be used as building blocks in the preparation of engineered nanostructured materials for enhanced heat transfer. Indeed, both phenol functionalized and dianiline-bridged GnP (GnP-OH and E-GnP, respectively) were assembled in nanopapers exploiting the formation of non-covalent and covalent molecular junctions, respectively. Molecular dynamics allowed to estimate the thermal conductance for the two different types of molecular junct…
Strain effects on the stabilization of Al ad-atom on graphene oxide(GO)nanosheet as well as its implications for NH3 storage have been investigated using first-principles calculations.The binding energy of Al ad-atom on GO is found to be a false indicator of its stability.Tensile strain is found to be very effective in stabilizing the Al ad-atom on GO.It strengthens the C-O bonds through an enhanced charge transfer from C to O atoms. Interestingly,C-O bond strength is found to be the correct index for Al's stability.Optimally strained Al-functionalized GO binds up to 6 NH3 molecules,while it b…
The electronic properties of chemically functionalized nanodiamonds are studied using density functional theory calculations. HOMO-LUMO gap and relative stabilities are calculated for different surface functionalization schemes and diamond nanocrystal morphologies. The effects of chemical decoration on the size and nature of the HOMO-LUMO gap of the various systems considered are discussed in detail. We conclude that surface chemical functionalization has the potential to become an accessible route for controlling the electronic properties of nanodiamonds.
We have carried out the systematic study of quantum capacitance (C$_Q$) in functionalized graphene. The functionlization of graphene has been done by doping with different aliphatic and aromatic molecules and their radicals. Using density functional theory calculations, we first analyze the electronic band structure of the functionalized graphene and subsequently obtained the quantum capacitance in each system. We observed that the quantum capacitance can be enhanced by doping aliphatic and aromatic molecules and their radicals on graphene sheet, especially radical functionalized graphene show…
We present exemplary results of extensive studies of mechanical, electronic and transport properties of covalent functionalization of graphene monolayers (GML) with -NH2. We report new results of ab initio studies of covalent functionalization of GML with -NH2 groups up to 12.5% concentration. Our studies are performed in the framework of the density functional theory (DFT) and non-equilibrium Green's function (NEGF). We discuss the stability (adsorption energy), elastic moduli, electronic structure, band gaps, and effective electron masses as a function of the density of the adsorbed molecule…
Monitoring electronic properties of 2D materials is an essential step to open a way for applications such as electronic devices and sensors. From this perspective, Bernal bilayer graphene (BLG) is a fairly simple system that offers great possibilities for tuning electronic gap and charge carriers' mobility by selective functionalization (adsorptions of atoms or molecules). Here, we present a detailed numerical study of BLG electronic properties when two types of adsorption site are present simultaneously. We focus on realistic cases that could be realized experimentally with adsorbate concentr…
Realisation of practical spintronic devices relies on the ability to create and detect pure spin currents. In graphene-based spin valves this is usually achieved by injection of spin-polarized electrons from ferromagnetic contacts via a tunnel barrier, with Al2O3 and MgO used most widely as barrier materials. However, the requirement to make these barriers sufficiently thin often leads to pinholes and low contact resistances which in turn results in low spin injection efficiencies, typically 5% at room temperature, due to the so-called resistance mismatch problem. Here we demonstrate an altern…
Interfacial thermal transport between electrodes and polymer electrolytes can play a crucial role in the thermal management of solid-state lithium-ion batteries (SLIBs). Modifying the electrode surface with functional molecules can effectively increase the interfacial thermal conductance (ITC) between electrodes and polymers (e.g., electrolytes, separators); however, how they influence the interfacial thermal transport in SLIBs during charge/discharge remains unknown. In this work, we conduct molecular dynamics (MD) simulations to investigate the ITC between charged electrodes and solid-state …
Within the framework of stochastic reactive molecular dynamics simulations we develop a statistical method for generating fluorinated graphene structures with desirable fluorine distribution. Electronic transport properties of fluorinated graphene in a wide range of functionalization degree and system ordering are investigated. We have found a strong correlation between irregularities in fluorine distribution and electronic properties. In particular, proposed consideration allows us to reproduce both the experimentally observed electron-hole asymmetry in transport properties of fluorinated gra…
MXene and its derivatives have attracted considerable attention for potential application in energy storage like batteries and supercapacitors owing to its ultrathin metallic structures. However, the complexity of the ionic and electronic dynamics in MXene based hybrids, which are normally needed for device integration, triggers both challenges and opportunities for its application. In this paper, as a prototype of metallic hybrids of MXene, heterostructures consisting of Ti3C2T2 (T= None, O and F atoms) and metallic MoS2 (1T phase) are investigated. Through density functional theory, we inves…
We report a systematic photoluminescence (PL) investigation of the spectral emission properties of individual optical defects fabricated in diamond upon ion implantation and annealing. Three spectral lines at 620 nm, 631 nm, and 647 nm are identified and attributed to the SnV center due to their occurrence in the PL spectra of the very same single-photon emitting defects. We show that the relative occurrence of the three spectral features can be modified by oxidizing the sample surface following thermal annealing. We finally report the relevant emission properties of each class of individual e…
Since solid-state heat transport in a highly porous nanocomposite strongly depends on the thermal boundary conductance (TBC) between constituent nanomaterials, further suppression of the TBC is important for improving performance of thermal insulators. Here, targeting a nanocomposite fabricated by stamping fumed silica nanoparticles, we perform a wide variety of surface functionalization on fumed silica nanoparticles by silane coupling method and investigate the impact on the thermal conductivity (Km). The Km of the silica nanocomposite is approximately 20 and 9 mW/m/K under atmospheric and va…
Thermally conductive nanopapers fabricated from graphene and related materials are currently showing a great potential in thermal management applications. However, thermal contacts between conductive plates represent the bottleneck for thermal conductivity of nanopapers prepared in the absence of a high temperature step for graphitization. In this work, the problem of ineffective thermal contacts is addressed by the use of bifunctional polyaromatic molecules designed to drive self-assembly of graphite nanoplates (GnP) and establish thermal bridges between them. To preserve the high conductivit…
