Superior effect of edge relative to basal plane functionalization of graphene in enhancing polymer-graphene nanocomposite thermal conductivity-A combined molecular dynamics and Greens functions study
To achieve high thermal conductivity (k) of polymer graphene nanocomposites, it is critically important to achieve efficient thermal coupling between graphene and its surrounding polymers through effective functionalization schemes. In this work, we demonstrate that edge-functionalization of graphene nanoplatelets (GnPs) can enable a larger enhancement of effective thermal conductivity in polymer-graphene nanocomposites, relative to basal plane functionalization. Effective thermal conductivity for edge case is predicted, through molecular dynamics simulations, to be up to 48% higher relative to basal plane bonding for 35 wt.% graphene loading with 10 layers thick nanoplatelets. This unique result opens up promising new avenues for achieving high thermal-conductivity polymer materials, which is of key importance for a wide range of thermal management technologies. The anisotropy of thermal transport in single layer graphene leads to very high in-plane thermal conductivity (~2000 W/mK) compared to the low out-of-plane thermal conductivity (~10 W/mK). Likewise, in multilayer graphene nanoplatelet (GnP), the thermal conductivity across the layers is even lower due to the weak van der Waals bonding between each pair of layers. Edge functionalization couples the polymer chains to the high in-plane thermal conduction pathway of graphene, thus leading to high overall high composite thermal conductivity. Basal-plane functionalization, however, lowers the thermal resistance between the polymer and the surface graphene sheets of the nanoplatelet only, causing the heat conduction through inner layers to be less efficient, thus resulting in basal plane scheme to be outperformed by edge scheme. The present study fundamentally enables novel pathways for achieving high thermal-conductivity polymer composites.
An electrospun membrane for vascular stent coating made of 2-methacryloyloxyethyl phosphorylcholine and butyl methacrylate copolymer (MPC-co-BMA), also known as (PMB), reinforced with functionalized and nitrogen doped reduced graphene oxide (f-NrGO) is presented. This membrane due to the nitrogen doped reduced graphene oxide (NrGO) negative electric charge has the capacity to repeal low density lipoproteins (LDL), which under specific conditions are the main cause of atherosclerotic disease. The NrGO functionalization process is detailed, as it creates strong bonds between NrGO and PMB, avoidi…
For the first time bis-functionalization of graphene employing two successive reduction and covalent bond formation steps are reported. Both bulk functionalization in solution and functionalization of individual sheets deposited on surfaces have been carried out. Whereas in the former case attacks from both sides of the basal plane are possible and can lead to strain-free architectures, in the latter case, retro-functionalizations can get important when the corresponding anion of the addend represents a sufficiently good leaving group.
Since solid-state heat transport in a highly porous nanocomposite strongly depends on the thermal boundary conductance (TBC) between constituent nanomaterials, further suppression of the TBC is important for improving performance of thermal insulators. Here, targeting a nanocomposite fabricated by stamping fumed silica nanoparticles, we perform a wide variety of surface functionalization on fumed silica nanoparticles by silane coupling method and investigate the impact on the thermal conductivity (Km). The Km of the silica nanocomposite is approximately 20 and 9 mW/m/K under atmospheric and va…
A radical anion based functionalization of the basal plane of two-dimensional (2D) materials is proposed in the present study. Simple charge neutral radical functionalizations typically detach from the basal planes upon reduction. For example, epoxy oxygens irreversibly detach from graphene when reduced by an alkali metal. The radical anion functionalization of 2D materials results in a stable reduced state that can reversibly be oxidized and has high ionic conductivity due to the great mobility of the cations between the negatively charged functional groups on the surface. Depending on the ox…
In this work, we demonstrate that edge-oxidation of graphene can enable larger enhancement in thermal conductivity (k) of graphene-nanoplatelet (GnP)/polyetherimide (PEI) composites relative to oxidation of the basal plane of graphene. Edge oxidation (EGO) offers the advantage of leaving the basal plane of graphene intact, preserving its high in-plane thermal conductivity (kin > 2000 Wm-1K-1), while, simultaneously, the oxygen groups introduced on graphene edge enhance interfacial thermal conductance through hydrogen bonding with oxygen groups of polyetherimide (PEI), enhancing overall polymer…
While the basal plane of graphene is inert, defects in it are centers of chemical activity. An attractive application of such defects is towards controlled functionalization of graphene with foreign molecules. However, the interaction of the defects with reactive environment, such as ambient, decreases the efficiency of functionalization and makes it poorly controlled. Here, we report a novel approach to generate, monitor with time resolution, and functionalize the defects $\textit{in situ}$ without ever exposing them to the ambient. The defects are generated by an energetic Argon plasma and t…
Different types of graphene-related materials (GRM) are industrially available and have been exploited for thermal conductivity enhancement in polymers. These include materials with very different features, in terms of thickness, lateral size and composition, especially concerning the oxygen to carbon ratio and the possible presence of surface functionalization. Due to the variability of GRM properties, the differences in polymer nanocomposites preparation methods and the microstructures obtained, a large scatter of thermal conductivity performance is found in literature. However, detailed cor…
Based on a low temperature scanning tunneling microscopy study, we present a direct visualization of a cycloaddition reaction performed for some specific fluorinated maleimide molecules deposited on graphene. These studies showed that the cycloaddition reactions can be carried out on the basal plane of graphene, even when there are no pre-existing defects. In the course of covalently grafting the molecules to graphene, the sp2 conjugation of carbon atoms was broken and local sp3 bonds were created. The grafted molecules perturbed the graphene lattice, generating a standing-wave pattern with an…
The realization of novel heterostructures arising from the combination of nanomaterials is an effective way to modify their physicochemical and electrocatalytic properties, giving them enhanced characteristics stemming from their individual constituents. Interfacing carbon nanohorns (CNHs) possessing high porosity, large specific surface area and good electrical conductivity, with MoS2 owning multiple electrocatalytic active sites but lacking significant conductivity, robust interactions and effective structure, can be a strategy to boost the electrocatalytic reduction of protons to molecular …
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here…
In this work, we have comprehensively studied the effect of auxiliary intercalating agents on the thermal conductivity of expanded graphite (EG) polymer composites. We report an ultra-high enhancement of 4030% in thermal conductivity of polyetherimide/graphene nanocomposite (k = 9.5 Wm-1K-1) prepared through the use of EG with hydrogen peroxide (H2O2) as an auxiliary intercalating agent at 10 wt% compositions (k of pure polyetherimide ~ 0.23 Wm-1K-1). This ultra-high thermal conductivity value is found to be due to an EG-mediated interconnected graphene network throughout the composite, establ…
