Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is found to progressively invade the contact. From the interfacial displacement field, the tangential stress field can be further computed using a numerical inversion procedure. These local mechanical measurements are found to be correctly captured by Cattaneo and Mindlin (CM)'s model. However, close comparison reveals significant discrepancies in both the displacements and stress fields that reflect the oversimplifying hypothesis underlying CM's scenario. In particular, our optical measurements allow us to exhibit an elasto-plastic like friction constitutive equation that differs from the rigid-plastic behavior assumed in CM's model. This local constitutive law, which involves a roughness-related length scale, is consistent with the model of Bureau \textit{et al.} [Proc. R. Soc. London A \textbf{459}, 2787 (2003)] derived for homogeneously loaded macroscopic multi-contact interfaces, thus extending its validity to mesoscopic scales.measurements allow for the first quantitative test of Cattaneo and Mindlin (CM) classical model of the incipient sliding of a smooth interface. Small deviations are observed and interpreted as a result of the finite compliance of the rough interface, a behavior which contrasts with Amontons' law of friction assumed to be valid locally in CM's model. We illustrate how these measurements actually provide a method for probing the rheology of the rough interface, which we find to be of the elasto-plastic type.
We measure the elastic and dissipative responses of a multicontact interface, formed between the rough surfaces of two contacting macroscopic solids, submitted to a biased oscillating shear force. We evidence that beyond a linear viscoelastic regime, observed at low shear amplitude, the interface response exhibits a dissipative component which corresponds to the onset of frictional dissipation. The latter regime exists whereas the tangential force applied, far from the nominal static threshold, does not provoke any sliding. This result, akin to that of Mindlin for a single contact, leads us to…
The onset of frictional motion is mediated by the dynamic propagation of a rupture front, analogous to a shear crack. The rupture front nucleates quasi-statically in a localized region of the frictional interface and slowly increases in size. When it reaches a critical nucleation length it becomes unstable, propagates dynamically and eventually breaks the entire interface, leading to macroscopic sliding. The nucleation process is particularly important because it determines the stress level at which the frictional interface fails, and therefore, the macroscopic friction strength. However, the …
We present molecular dynamics friction calculations for confined hydrocarbon solids with molecular lengths from 20 to 1400 carbon atoms. Two cases are considered: (a) polymer sliding against a hard substrate, and (b) polymer sliding on polymer. We discuss the velocity dependence of the frictional shear stress for both cases. In our simulations, the polymer films are very thin (approx. 3 nm), and the solid walls are connected to a thermostat at a short distance from the polymer slab. Under these circumstances we find that frictional heating effects are not important, and the effective temperatu…
The transition from static to dynamic friction is often described as a fracture-like instantaneous slip. However, studies on slow sliding processes aimed at understanding frictional instabilities and earthquakes report slow friction transients that are usually explained by empirical rate-and-state formulations. We perform very slow ($\sim nm/s$) macroscopic-scale sliding experiments and show that the onset of frictional slip is governed by continuous non-monotonic dynamics originating from a competition between contact aging and shear-induced rejuvenation. This allows to describe both our non-…
The dynamic frictional force between solid surfaces in relative motion differs from the static force needed to initiate motion, but this distinction is not usually thought to occur for liquid drops moving on a solid. Recent experiments [Gao, et al., Nature Phys. {\bf 114}, 191 (2018)] have challenged this view, and claim to observe an analog of solid-on-solid friction for sliding drops. We use molecular dynamic simulations to investigate the forces that moving liquids exert on solids in several situations. In contrast to the indirect techniques required in laboratory experiments, the forces in…
When two solids start rubbing together, frictional sliding initiates in the wake of slip fronts propagating along their surfaces in contact. This macroscopic rupture dynamics can be successfully mapped on the elastodynamics of a moving shear crack. However, this analogy breaks down during the nucleation process, which develops at the scale of surface asperities where microcontacts form. Recent atomistic simulations revealed how a characteristic junction size selects if the failure of microcontact junctions either arises by brittle fracture or by ductile yielding. This work aims at bridging the…
This paper addresses the issue of the determination of the frictional stress distribution from the inversion of the measured surface displacement field for sliding interfaces between a glass lens and a rubber (poly(dimethylsiloxane)) substrate. Experimental results show that high lateral strains are achieved at the periphery of the sliding contacts. As a consequence, an accurate inversion of the displacement field requires that finite strains and non linear response of the rubber substrate are taken into account. For that purpose, a Finite Element (FE) inversion procedure is implemented where …
We propose an elasto-plastic inspired friction model which incorporates interfacial stiffness. Steady state sliding friction is characterized by a generic nonmonotonic behavior, including both velocity weakening and strengthening branches. In 1D and upon the application of sideway loading, we demonstrate the existence of transient cracklike fronts whose velocity is independent of sound speed, which we propose to be analogous to the recently discovered slow interfacial rupture fronts. Most importantly, the properties of these transient inhomogeneously loaded fronts are determined by steady stat…
This paper presents the stability analysis of a system sliding at low velocities ($< 100 μ$m.s$^{-1}$) under a periodically modulated normal load, preserving interfacial contact. Experiments clearly evidence that normal vibrations generally stabilize the system against stick-slip oscillations, at least for a modulation frequency much larger than the stick-slip one. The mechanical model of Bureau {\it et al.} (2000), validated on the steady-state response of the system, is used to map its stability diagram. The model takes explicitly into account the finite shear stiffness of the load-bearing a…
The dynamics of frictional interfaces play an important role in many physical systems spanning a broad range of scales. It is well-known that frictional interfaces separating two dissimilar materials couple interfacial slip and normal stress variations, a coupling that has major implications on their stability, failure mechanism and rupture directionality. In contrast, interfaces separating identical materials are traditionally assumed not to feature such a coupling due to symmetry considerations. We show, combining theory and experiments, that interfaces which separate bodies made of macrosco…
Inspired by spring-block models, we elaborate a "minimal" physical model of earthquakes which reproduces two main empirical seismological laws, the Gutenberg-Richter law and the Omori aftershock law. Our new point is to demonstrate that the simultaneous incorporation of ageing of contacts in the sliding interface and of elasticity of the sliding plates constitute the minimal ingredients to account for both laws within the same frictional model.
Variable power transmission in mechanical systems is often achieved by devices, e.g., clutches and brakes, that use dry friction. In these systems, the variability in power transmission is brought about by engaging and disengaging the friction plates. Though commonly used, this method of making the coupling noisy is not as versatile as their electrical analog. An alternative method would be to intermittently vary the frictional force. In this paper, we demonstrate a self-organized way to tune the noise in the frictional coupling between two surfaces which are in relative motion with each other…
In this paper, we report on new experimental results on the effects of in-plane surface stretching on the friction of Poly(DiMethylSiloxane) (PDMS) rubber with smooth rigid probes. Friction-induced displacement fields are measured at the surface of the PDMS substrate under steady-state sliding. Then, the corresponding contact pressure and frictional stress distributions are determined from an inversion procedure. Using this approach, we show that the local frictional stress $τ$ is proportional to the local stretch ratio $λ$ at the rubber surface. Additional data using a triangular flat punch i…
A MEMS-based sensing device is used to measure the normal and tangential stress fields at the base of a rough elastomer film in contact with a smooth glass cylinder in steady sliding. This geometry allows for a direct comparison between the stress profiles measured along the sliding direction and the predictions of an original \textit{exact} bidimensional model of friction. The latter assumes Amontons' friction law, which implies that in steady sliding the interfacial tangential stress is equal to the normal stress times a pressure-independent dynamic friction coefficient $μ_d$, but makes no f…
We report on memory effects involved in the transient frictional response of a contact interface between a silicone rubber and a spherical glass probe when it is perturbed by changes in the orientation of the driving motion or by velocity steps. From measurements of the displacement fields at the interface, we show that observed memory effects can be accounted for by the non-uniform distribution of the sliding velocity within the contact interface. As a consequence of these memory effects, the friction force may no longer be aligned with respect to the sliding trajectory. In addition, stick-sl…
We study the 2D linear stability analysis of a deformable solid of a finite height $H$, steadily sliding on top of a rigid solid within a generic rate-and-state friction type constitutive framework, fully accounting for elastodynamic effects. We derive the linear stability spectrum, quantifying the interplay between stabilization related to the frictional constitutive law and destabilization related both to the elastodynamic bi-material coupling between normal stress variations and interfacial slip, and to finite size effects. The stabilizing effects related to the frictional constitutive law …
A decade ago, Budakian and Putterman (Phys. Rev. Lett., {\bf 85}, 1000 (2000)) ascribed friction to the formation of bonds arising from contact charging when a gold tip of a surface force apparatus was dragged on polymethylmethacrylate surface. We propose a stick-slip model that captures the observed correlation between stick-slip events and charge transfer, and the lack of dependence of the scale factor connecting the force jumps and charge transfer on normal load. Here, stick-slip dynamics arises as a competition between the visco-elastic and plastic deformation time scales and that due to t…
Sliding along frictional interfaces separating dissimilar elastic materials is qualitatively different from sliding along interfaces separating identical materials due to the existence of an elastodynamic coupling between interfacial slip and normal stress perturbations in the former case. This bimaterial coupling has important implications for the dynamics of frictional interfaces, including their stability and rupture propagation along them. We show that while this bimaterial coupling is a monotonically increasing function of the bimaterial contrast, when it is coupled to interfacial shear s…
Using molecular dynamics based on Langevin equations with a coordinate- and velocity-dependent damping coefficient, we study the frictional properties of a thin layer of "soft" lubricant (where the interaction within the lubricant is weaker than the lubricant-substrate interaction) confined between two solids. At low driving velocities the system demonstrates stick-slip motion. The lubricant may or may not be melted during sliding, thus exhibiting either the "liquid sliding" (LS) or the "layer over layer sliding" (LoLS) regimes. The LoLS regime mainly operates at low sliding velocities. We inv…
Recent experiments indicate that frictional sliding occurs by the nucleation of detachment fronts at the contact interface that may appear well before the onset of global sliding. This intriguing precursory activity is not accounted for by traditional friction theories but is extremely important for friction dominated geophysical phenomena such as earthquakes, landslides or avalanches. Here we simulate the onset of slip of a three dimensional elastic body resting on a surface and show that experimentally observed frictional precursors depend in a complex non-universal way on the sample geometr…
Elastomeric materials when sliding on clean and rough surfaces generate wrinkles at the interface due to tangential stress gradients. These interfacial folds travel along the bottom of elastomer as surface detachment waves to facilitate the apparent sliding motion of elastomer. At very low sliding speed compared to elastic surface waves, the process is dominated by surface adhesion and relaxation effects, and the phenomenon is historically referred to as Schallamach waves. We report in this letter the observation of fast-traveling intersonic detachment waves exceeding the Rayleigh and shear wa…
\textbf{Background} Hydrogels are crosslinked polymer networks that can absorb and retain a large fraction of liquid. Near a critical sliding velocity, hydrogels pressed against smooth surfaces exhibit time-dependent frictional behavior occurring over multiple timescales, yet the origin of these dynamics is unresolved. \textbf{Objective} Here, we characterize this time-dependent regime and show that it is consistent with two distinct molecular processes: sliding-induced relaxation and quiescent recovery. \textbf{Methods} Our experiments use a custom pin-on-disk tribometer to examine poly(acryl…
The onset of frictional sliding between contacting bodies under shear load is nucleated by the quasi-static growth of localized slip patches. After reaching a certain critical size, these patches become unstable and continue growing dynamically, eventually causing the sliding of the entire interface. Two different theories have been used to compute the nucleation length of such patches depending on the dominant process driving their growth. If it is only the yielding of contact asperities (large-scale yielding), a stress criterion is applied, based on linear stability analysis, whereas if frac…
Macroscopic sliding between two solids is triggered by the propagation of a micro-slip front along the frictional interface. In certain conditions, sliding is preceded by the propagation of aborted fronts, spanning only part of the contact interface. The selection of the characteristic size spanned by those so-called precursors remains poorly understood. Here, we introduce a 1D toy model of precursors between a slider and a track in which the fronts are quasi-static self-healing slip pulses. When the slider's thickness is large compared to the elastic correlation length and when the interfacia…
Colloidal 2D monolayers sliding in an optical lattice are of recent importance as a frictional system. In the general case when the monolayer and optical lattices are incommensurate, we predict two important novelties, one in the static equilibrium structure, the other in the frictional behavior under sliding. Structurally, realistic simulations show that the colloid layer should possess in full equilibrium a small misalignment rotation angle relative to the optical lattice, an effect so far unnoticed but visible in some published experimental moiré patterns. Under sliding, this misalignment h…
In rubber friction studies it is often observed that the kinetic friction coefficient μ depends on the nominal contact pressure p. We discuss several possible origins of the pressure dependency of μ: (a) saturation of the contact area (and friction force) due to high nominal squeezing pressure, (b) non-linear viscoelasticity, (c) non-randomness in the surface topography, in particular the influence of the skewness of the surface roughness profile, (d) adhesion, and (e) frictional heating. We show that in most cases the non-linearity in the μ(p) relation is mainly due to process (e) (frictional…
We present an experimental investigation of the non stationary frictional properties of multicontact interfaces between rough elastomers and rough hard glass at low velocities (<= 200 mu m s^{-1}). These systems, for which the deformation contribution to friction is negligible, are shown to exhibit a phenomenology which is similar to what is observed for non elastomeric materials in the same multi-contact configuration, and which are quantitatively described by the state- and rate-dependent friction laws. This permits to identify clearly the two contributions to adhesive friction which are mix…
We report on the frictional behaviour of thin poly(dimethylacrylamide) (PDMA) hydrogels films grafted on glass substrates in sliding contact with a glass spherical probe. Friction experiments are carried out at various velocities and applied normal loads with the contact fully immersed in water. In addition to friction force measurements, a novel optical set-up is designed to image the shape of the contact under steady-state sliding. The velocity-dependence of both friction force $F_t$ and contact shape is found to be controlled by a Péclet number Pe defined as the ratio of the time $τ$ needed…
We study the peeling process of a thin viscoelastic tape from a rigid substrate. Two different boundary conditions are considered at the interface between the tape and the substrate: stuck adhesion, and relative sliding in the presence of frictional shear stress. In the case of perfectly sticking interfaces, we found that the viscoelastic peeling behavior resembles the classical Kendall behavior of elastic tapes, with the elastic modulus given by the tape high-frequency viscoelastic modulus. Including the effect of frictional sliding, which occurs at the interface adjacent to the peeling front…
Frictional interfaces are abundant in natural and engineering systems, and predicting their behavior still poses challenges of prime scientific and technological importance. At the heart of these challenges lies the inherent coupling between the interfacial constitutive relation -- the macroscopic friction law -- and the bulk elasticity of the bodies that form the frictional interface. In this feature paper, we discuss the generic properties of the macroscopic friction law and the many ways in which its coupling to bulk elasticity gives rise to rich spatiotemporal frictional dynamics. We first…
Friction in static and sliding contact of rough surfaces is important in numerous physical phenomena. We seek to understand macroscopically observed static and sliding contact behavior as the collective response of a large number of microscopic asperities. We develop an efficient numerical framework that can be used to investigate how the macroscopic response of multiple frictional contacts depends on long-range elastic interactions, different constitutive assumptions about the deforming contacts and their local shear resistance, and surface roughness. We approximate the contact between two ro…
Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastic block (cylinder) with a ${\rm cos} (q_0 x)$ surface height profile is sliding in adhesive contact on a rigid flat substrate.The atoms on the block interact with the substrate atoms by Lennard-Jones (LJ) potentials, and we consider both commensurate and(nearly) incommensurate contacts. For the incommensurate system the friction force fluctuates between positive and negative values, with an amplitude proportional to the sliding speed, but with the average close to zero. For the com…
We report on the frictional properties of a single contact between a glassy polymer lens and a flat silica substrate covered either by a disordered or by a self-assembled alkylsilane monolayer. We find that, in contrast to common belief, the Amontons proportionality between frictional and normal stresses does not hold. Besides, we observe that the velocity dependence of the sliding stress is strongly sensitive to the structure of the silane layer. Analysis of the frictional rheology observed on both disordered and self-assembled monolayers suggests that dissipation is controlled by the plastic…
The onset of frictional motion is mediated by rupture-like slip fronts, which nucleate locally and propagate eventually along the entire interface causing global sliding. The static friction coefficient is a macroscopic measure of the applied force at this particular instant when the frictional interface loses stability. However, experimental studies are known to present important scatter in the measurement of static friction; the origin of which remains unexplained. Here, we study the nucleation of local slip at interfaces with slip-weakening friction of random strength and analyze the result…
A model of friction with plastic contact nudging: Amontons-Coulomb laws, aging of static friction, and non-monotonic Stribeck curves with finite quasistatic limit
We study the effect of viscoelastic dynamics on the frictional properties of a (mean field) spring-block system pulled on a rough surface by an external drive. When the drive moves at constant velocity V, two dynamical regimes are observed: at fast driving, above a critical threshold Vc, the system slides at the drive velocity and displays a friction force with velocity weakening. Below Vc the steady sliding becomes unstable and a stick-slip regime sets in. In the slide-hold-slide driving protocol, a peak of the friction force appears after the hold time and its amplitude increases with the ho…
We report on the transient frictional response of contacts between a rigid spherical glass probe and a micrometer-thick poly(dimethylacrylamide) hydrogel film grafted onto a glass substrate when a lateral relative motion is applied to the contact initially at rest. From dedicated experiments with \textit{in situ} contact visualization, both the friction force and the contact size are observed to vary well beyond the occurrence of a full sliding condition at the contact interface. Depending on the imposed velocity and on the static contact time before the motion is initiated, either an overshoo…
We simultaneously measure the static friction and the real area of contact between two solid bodies. Under static conditions both quantities increase logarithmically in time, a phenomenon coined aging. Indeed, frictional strength is traditionally considered equivalent to the real area of contact. Here we show that this equivalence breaks down when a static shear load is applied during aging. The addition of such a shear load accelerates frictional aging while the aging rate of the real area of contact is unaffected. Moreover, a negative static shear - pulling instead of pushing - slows frictio…
In this paper, we speculate on a possible application of Liquid Crystal Elastomers to the field of soft robotics. In particular, we study a concept for limbless locomotion that is amenable to miniaturisation. For this purpose, we formulate and solve the evolution equations for a strip of nematic elastomer, subject to directional frictional interactions with a flat solid substrate, and cyclically actuated by a spatially uniform, time-periodic stimulus (e.g., temperature change). The presence of frictional forces that are sensitive to the direction of sliding transforms reciprocal, 'breathing-li…
The origin of the abrupt shear thickening observed in some dense suspensions has been recently argued to be a transition from frictionless (lubricated) to frictional interactions between immersed particles. The Wyart-Cates rheological model, built on this scenario, introduced the concept of fraction of frictional contacts $f$ as the relevant order parameter for the shear thickening transition. Central to the model is the "equation-of-state" relating $f$ to the applied stress $σ$, which is directly linked to the distribution of the normal components of non-hydrodynamics interparticle forces. He…
The use of electrophoretic forces to tune friction at material-nanoparticle-liquid interfaces with static or low frequency (0.6-50 mHz) electric fields is reported for the first time. External electric fields were employed to reposition negatively charged TiO2 or positively charged Al2O3 nanoparticles suspended in water in directions perpendicular to a planar platinum surface of a quartz crystal microbalance, which was then used to monitor frictional shear forces at the interface. Active electro-tunable control of friction has been demonstrated for both TiO2 and Al2O3 suspensions. For TiO2 sus…
The linear-frictional contact model is the most commonly used contact mechanism for discrete element (DEM) simulations of granular materials. Linear springs with a frictional slider are used for modeling interactions in directions normal and tangential to the contact surface. Although the model is simple in two dimensions, its implementation in 3D faces certain subtle challenges, and the particle interactions that occur within a single time-step require careful modeling with a robust algorithm. The paper details a 3D algorithm that accounts for the changing direction of the tangential force wi…
We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the rubber friction insensitive to the substrate surface energy. We show that there is no simple relation between adhesion and friction: adhesion is due to (vertical) detachment processes at the edge of the contact regions (opening crack propagation), while friction in many cases is determined mainly by (tangential) stick-slip instabilities of nanosized regions, w…
