We develop two new designs of unitary differential space-time modulation (DSTM) with low decoding complexity. Their decoder can be separated into a few parallel decoders, each of which has a decoding search space of less than sqrt(N) if the DSTM codebook contains N codewords. Both designs are based on the concept of joint modulation, which means that several information symbols are jointly modulated, unlike the conventional symbol-by-symbol modulation. The first design is based on Orthogonal Space-Time Block Code (O-STBC) with joint constellation constructed from spherical codes. The second design is based on Quasi-Orthogonal Space-Time Block Code (QO-STBC) with specially designed pair-wise constellation sets. Both the proposed unitary DSTM schemes have considerably lower decoding complexity than many prior DSTM schemes, including those based on Group Codes and Sp(2) which generally have a decoding search space of N for a codebook size of N codewords, and much better decoding performance than the existing O-STBC DSTM scheme. Between two designs, the proposed DSTM based on O-STBC generally has better decoding performance, while the proposed DSTM based on QO-STBC has lower decoding complexity when 8 transmit antennas.
In this paper, we derive a maximum likelihood (ML) decoder of the differential data in a decode-and-forward (DF) based cooperative communication system utilizing uncoded transmissions. This decoder is applicable to complex-valued unitary and non-unitary constellations suitable for differential modulation. The ML decoder helps in improving the diversity of the DF based differential cooperative system using an erroneous relaying node. We also derive a piecewise linear (PL) decoder of the differential data transmitted in the DF based cooperative system. The proposed PL decoder significantly reduc…
The orthogonal-time-frequency-space (OTFS) modulation has emerged as a promising modulation scheme for high mobility wireless communications. To harvest the time and frequency diversity promised by OTFS, some promising detectors, especially message passing based ones, have been developed by taking advantage of the sparsity of the channel in the delay-Doppler domain. However, when the number of channel paths is relatively large or fractional Doppler {shifts have} to be considered, the complexity of existing detectors is a concern, and the message passing based detectors may suffer from performa…
Matrix Joint Diagonalization (MJD) is a powerful approach for solving the Blind Source Separation (BSS) problem. It relies on the construction of matrices which are diagonalized by the unknown demixing matrix. Their joint diagonalizer serves as a correct estimate of this demixing matrix only if it is uniquely determined. Thus, a critical question is under what conditions a joint diagonalizer is unique. In the present work we fully answer this question about the identifiability of MJD based BSS approaches and provide a general result on uniqueness conditions of matrix joint diagonalization. It …
In this paper, we present a low-complexity joint detection-decoding algorithm for nonbinary LDPC codedmodulation systems. The algorithm combines hard-decision decoding using the message-passing strategy with the signal detector in an iterative manner. It requires low computational complexity, offers good system performance and has a fast rate of decoding convergence. Compared to the q-ary sum-product algorithm (QSPA), it provides an attractive candidate for practical applications of q-ary LDPC codes.
In this paper, we present a joint Doppler frequency shift compensation and data detection method using 2-D unitary ESPRIT algorithm for SIMO-OFDM railway communication systems over fast time-varying sparse multipath channels. By creating the spatio-temporal array data matrix utilizing the ISI-free part of the CP (cyclic prefix), we first propose a novel algorithm for obtaining auto-paired joint DOA and Doppler frequency shift estimates of all paths via 2-D unitary ESPRIT algorithm. Thereafter, based on the obtained estimates, a joint Doppler frequency shift compensation and data detection meth…
In this paper, we consider the problem of constellation design for a visible light communication (VLC) system using red/green/blue light-emitting diodes (RGB LED), and propose a method termed DC-informative joint color-frequency modulation (DCI-JCFM). This method jointly utilizes available diversity resources including different optical wavelengths, multiple baseband subcarriers, and adaptive DC-bias. Constellation is designed in a high dimensional space, where the compact sphere packing advantage over lower dimensional counterparts is utilized. Taking into account multiple practical illuminat…
This work considers communication networks where individual links can be described as MIMO channels. Unlike orthogonal modulation methods (such as the singular-value decomposition), we allow interference between sub-channels, which can be removed by the receivers via successive cancellation. The degrees of freedom earned by this relaxation are used for obtaining a basis which is simultaneously good for more than one link. Specifically, we derive necessary and sufficient conditions for shaping the ratio vector of sub-channel gains of two broadcast-channel receivers. We then apply this to two sc…
In this paper, we propose a novel non-orthogonal multiple access (NOMA) scheme based on trellis-coded modulation (TCM). Different from those in the traditional code-domain NOMA, the incoming data streams of multiple users are jointly coded and mapped to the codewords so as to improve the coding gain of the system without any bandwidth extension. Both codeword design and multi-user detection are considered to optimize the TCM for NOMA. The multi-dimensional (MD) constellation is carefully selected and a new set partitioning algorithm is developed for MD signal set labeling. To achieve the trade…
A new nonlinear Rao-Nam like symmetric key encryption scheme is presented in this paper. QC-LDPC lattices that are practically implementable in high dimensions due to their low complexity encoding and decoding algorithms, are used in our design. Then, a joint scheme is proposed which is capable of encrypting, encoding and data modulation simultaneously. The proposed cryptosystem withstands all variants of chosen plaintext attacks applied on Rao-Nam like cryptosystems due to its nonlinearity. The sparseness of the parity-check matrix of QC-LDPC lattices, quasi-cyclic nature of their generator a…
This paper presents a cross-layer approach to jointly design adaptive modulation and coding (AMC) at the physical layer and cooperative truncated automatic repeat request (ARQ) protocol at the data link layer. We first derive an exact closed form expression for the spectral efficiency of the proposed joint AMC-cooperative ARQ scheme. Aiming at maximizing this system performance measure, we then optimize an AMC scheme which directly satisfies a prescribed packet loss rate constraint at the data-link layer. The results indicate that utilizing cooperative ARQ as a retransmission strategy, noticea…
Differential Unitary Space-Time Modulation (DUSTM) and its earlier nondifferential counterpart, USTM, permit high-throughput MIMO communication entirely without the possession of channel state information (CSI) by either the transmitter or the receiver. For an isotropically random unitary input we obtain the exact closed-form expression for the probability density of the DUSTM received signal, which permits the straightforward Monte Carlo evaluation of its mutual information. We compare the performance of DUSTM and USTM through both numerical computations of mutual information and through the …
The combination of source coding with decoder side-information (Wyner-Ziv problem) and channel coding with encoder side-information (Gel'fand-Pinsker problem) can be optimally solved using the separation principle. In this work we show an alternative scheme for the quadratic-Gaussian case, which merges source and channel coding. This scheme achieves the optimal performance by a applying modulo-lattice modulation to the analog source. Thus it saves the complexity of quantization and channel decoding, and remains with the task of "shaping" only. Furthermore, for high signal-to-noise ratio (SNR),…
In learning-based semantic communications, neural networks have replaced different building blocks in traditional communication systems. However, the digital modulation still remains a challenge for neural networks. The intrinsic mechanism of neural network based digital modulation is mapping continuous output of the neural network encoder into discrete constellation symbols, which is a non-differentiable function that cannot be trained with existing gradient descend algorithms. To overcome this challenge, in this paper we develop a joint coding-modulation scheme for digital semantic communica…
The problem of transmitting a common message to multiple users over the Gaussian multiple-input multiple-output broadcast channel is considered, where each user is equipped with an arbitrary number of antennas. A closed-loop scenario is assumed, for which a practical capacity-approaching scheme is developed. By applying judiciously chosen unitary operations at the transmit and receive nodes, the channel matrices are triangularized so that the resulting matrices have equal diagonals, up to a possible multiplicative scalar factor. This, along with the utilization of successive interference cance…
Most diffusion based molecular channels suffer from low information capacity due to the structure of the diffusion environment. To address this issue, this paper studies the capacity of the diffusion based molecular communication by exploiting both time and concentration level of the released molecules for information transfer. The transmitter releases molecules in one of the sub-intervals with a level of concentration both determined by input data, hereby applying joint time and concentration (JTAC) modulation. The observation time, at the receiver, which is equal to symbol period, is divided…
In this paper, we consider a general bi-directional relay network with two sources and N relays when neither the source nodes nor the relays know the channel state information (CSI). A joint relay selection and analog network coding using differential modulation (RS-ANC-DM) is proposed. In the proposed scheme, the two sources employ differential modulations and transmit the differential modulated symbols to all relays at the same time. The signals received at the relay is a superposition of two transmitted symbols, which we call the analog network coded symbols. Then a single relay which has m…
Joint radar-communication (JRC) waveform can be used for simultaneous radar detection and communication in the same frequency band. However, radar detection processing requires the prior knowledge of the waveform including the embedded information for matched filtering. To remove this requirement, we propose a unimodular JRC waveform based on composite modulation where the internal modulation embeds information by mapping the bit sequence to different orthogonal signals, and the external modulation performs phase modulation on the internal waveform to satisfy the demand of detection. By adjust…
In a cooperative relay network, a relay node (R) facilitates data transmission to the destination node (D), when the latter is unable to decode the source node (S) data correctly. This paper considers such a system model and presents a cross-layer approach to jointly design adaptive modulation and coding (AMC) at the physical layer and cooperative truncated automatic repeat request (ARQ) protocol at the data link layer. We first derive a closed form expression for the spectral efficiency of the joint cooperative ARQ-AMC scheme. Aiming at maximizing this performance measure, we then optimize tw…
As a green and secure wireless transmission way, secure spatial modulation (SM) is becoming a hot research area. Its basic idea is to exploit both the index of activated transmit antenna and amplitude phase modulation (APM) signal to carry messages, improve security, and save energy. In this paper, we reviewed its crucial techniques: transmit antenna selection (TAS), artificial noise (AN) projection, power allocation (PA), and joint detection at desired receiver. To achieve the optimal performance of maximum likelihood (ML) detector, a deep-neural-network (DNN) joint detector is proposed to jo…
To make a good balance between performance, cost, and power consumption, a hybrid intelligent reflecting surface (IRS)-aided directional modulation (DM) network is investigated in this paper, where the hybrid IRS consists of passive and active reflecting elements. To maximize the achievable rate, two optimization algorithms, called maximum signal-to-noise ratio (SNR)-fractional programming (FP) (Max-SNR-FP) and maximum SNR-equal amplitude reflecting (EAR) (Max-SNR-EAR), are proposed to jointly design the beamforming vector and phase shift matrix (PSM) of hybrid IRS by alternately optimizing on…
Approximate joint diagonalization of a set of matrices provides a powerful framework for numerous statistical signal processing applications. For non-unitary joint diagonalization (NUJD) based on the least-squares (LS) criterion, outliers, also referred to as anomaly or discordant observations, have a negative influence on the performance, since squaring the residuals magnifies the effects of them. To solve this problem, we propose a novel cost function that incorporates the soft decision-directed scheme into the least-squares algorithm and develops an efficient algorithm. The influence of the…
This paper proposes a novel spread spectrum and sub-carrier index modulation (SS-SIM) scheme, which is integrated to orthogonal frequency division multiplexing (OFDM) framework to enhance the diversity over the conventional IM schemes. Particularly, the resulting scheme, called SS-SIMOFDM, jointly employs both spread spectrum and sub-carrier index modulations to form a precoding vector which is then used to spread an M-ary complex symbol across all active sub-carriers. As a result, the proposed scheme enables a novel transmission of three signal domains: SS and sub-carrier indices, and a singl…
We present a low-complexity joint demapper-decoder scheme for coherent optical receivers with DQPSK modulation. The new technique reduces to 0.7dB the gap between QPSK and DQPSK in 100Gb/s coherent optical systems.
We introduce a trainable coded modulation scheme that enables joint optimization of the bit-wise mutual information (BMI) through probabilistic shaping, geometric shaping, bit labeling, and demapping for a specific channel model and for a wide range of signal-to-noise ratios (SNRs). Compared to probabilistic amplitude shaping (PAS), the proposed approach is not restricted to symmetric probability distributions, can be optimized for any channel model, and works with any code rate $k/m$, $m$ being the number of bits per channel use and $k$ an integer within the range from $1$ to $m-1$. The propo…
Intelligent reflecting surface (IRS) is a revolutionary and low-cost technology for boosting the spectrum and energy efficiencies in future wireless communication network. In order to create controllable multipath transmission in the conventional line-of-sight (LOS) wireless communication environment, an IRS-aided directional modulation (DM) network is considered. In this paper, to improve the transmission security of the system and maximize the receive power sum (Max-RPS), two alternately optimizing schemes of jointly designing receive beamforming (RBF) vectors and IRS phase shift matrix (PSM…
A framework is proposed that allows for a joint description and optimization of both binary polar coding and the multilevel coding (MLC) approach for $2^m$-ary digital pulse-amplitude modulation (PAM). The conceptual equivalence of polar coding and multilevel coding is pointed out in detail. Based on a novel characterization of the channel polarization phenomenon, rules for the optimal choice of the bit labeling in this coded modulation scheme employing polar codes are developed. Simulation results for the AWGN channel are included.
Next generation wireless networks are expected to provide much higher data throughput and reliable connections for a far larger number of wireless service subscribers and machine-type nodes, which result in increasingly stringent requirements of spectral efficiency (SE) and energy efficiency (EE). Orthogonal frequency-division multiplexing with index modulation (OFDM-IM) stands out as a promising solution to satisfy the SE requirement with a reasonable increase in system complexity. However, the EE of OFDM-IM is still required to be enhanced. Moreover, diversity gain is hardly harvested in OFD…
The recently proposed orthogonal time frequency space (OTFS) modulation technique was shown to provide significant error performance advantages over orthogonal frequency division multiplexing (OFDM) in Doppler channels. In this paper, we derive the explicit input-output relation describing OTFS modulation and demodulation (mod/demod) for delay-Doppler channels. We analyze the interferences and develop a novel low-complexity yet efficient message passing (MP) algorithm for joint interference cancellation (IC) and symbol detection. The proposed MP algorithm can effectively compensate for a wide …
We consider a joint radar estimation and communication system using orthogonal frequency division multiplexing (OFDM) and orthogonal time frequency space (OTFS) modulations. The scenario is motivated by vehicular applications where a vehicle equipped with a mono-static radar wishes to communicate data to its target receiver, while estimating parameters of interest related to this receiver. By focusing on the case of a single target, we derive the maximum likelihood (ML) estimator and the Cramér-Rao lower bound on joint velocity and range estimation. Numerical examples demonstrate that both dig…
This paper introduces a novel approach of utilizing the reconfigurable intelligent surface (RIS) for joint data modulation and signal beamforming in a multi-user downlink cellular network by leveraging the idea of backscatter communication. We present a general framework in which the RIS, referred to as modulating intelligent surface (MIS) in this paper, is used to: i) beamform the signals for a set of users whose data modulation is already performed by the base station (BS), and at the same time, ii) embed the data of a different set of users by passively modulating the deliberately sent carr…
In this paper, we represent Raptor codes as multi-edge type low-density parity-check (MET-LDPC) codes, which gives a general framework to design them for higher-order modulation using MET density evolution. We then propose an efficient Raptor code design method for higher-order modulation, where we design distinct degree distributions for distinct bit levels. We consider a joint decoding scheme based on belief propagation for Raptor codes and also derive an exact expression for the stability condition. In several examples, we demonstrate that the higher-order modulated Raptor codes designed us…
Autonomous driving (auto-driving) has been becoming a killer technology for next generation vehicles, whereas some fatal accidents grow concerns about its safety. A fundamental function for safer auto-driving is to recognize the vehicles' locations, termed vehicular positioning. The state-of-the-art vehicular positioning is to rely on anchors that are stationary objects whose locations are known, i.e. satellites for GPS and base stations for cellular positioning. It is important for reliable positioning to install anchors densely, helping find enough anchors nearby. For the deployment to be co…
We investigate the relationship between Orthogonal Time Frequency Space (OTFS) modulation and Orthogonal Short Time Fourier (OSTF) signaling. OTFS was recently proposed as a new scheme for high Doppler scenarios and builds on OSTF. We first show that the two schemes are unitarily equivalent in the digital domain. However, OSTF defines the analog-digital interface with the waveform domain. We then develop a critically sampled matrix-vector model for the two systems and consider linear minimum mean-squared error (MMSE) filtering at the receiver to suppress inter-symbol interference. Initial comp…
This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square $M$-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols ar…
When classical information is sent over a channel with quantum-state modulation alphabet, such as the free-space optical (FSO) channel, attaining the ultimate (Holevo) limit to channel capacity requires the receiver to make joint measurements over long codeword blocks. In recent work, we showed a receiver for a pure-state channel that can attain the ultimate capacity by applying a single-shot optical (unitary) transformation on the received codeword state followed by simultaneous (but separable) projective measurements on the single-modulation-symbol state spaces. In this paper, we study the u…
Unitary space-time modulation is known to be an efficient means to communicate over non-coherent Multiple Input Multiple Output (MIMO) channels. In this letter, differential unitary space-time coding and non-coherent space-time coding for the training based approach of Kim and Tarokh are addressed. For this approach, necessary and sufficient conditions for multi-group decodability are derived in a simple way assuming a Generalized Likelihood Ratio Test receiver and a unitary codebook. Extending Kim and Tarokh's approach for colocated MIMO systems, a novel training based approach to distributed…
In this paper, we propose a novel joint coding-modulation technique based on serial concatenation of orthogonal linear transform, such as discrete Fourier transform (DFT) or Walsh-Hadamard transform (WHT), with memoryless nonlinearity. We demonstrate that such a simple signal construction may exhibit properties of a random code ensemble, as a result approaching channel capacity. Our computer simulations confirm that if the decoder relies on a modified approximate message passing algorithm, the proposed modulation technique exhibits performance on par with state-of-the-art coded modulation sche…
Orthogonal time-frequency space (OTFS) modulation is a recently proposed waveform for efficient data transfer in high-speed vehicular scenarios. The use of rectangular pulse shape in OTFS results in high out of band (OoB) radiation, which is undesirable for multi-user scenarios. In this work, we present a circular pulse shaping framework for OTFS for reducing the OoB. We also design a low complexity transmitter for such a system. We argue in favor of orthogonal transmission for low complexity transceiver structure. We establish that frequency-localized circulant Dirichlet pulse is one of the p…
Deep learning-based joint source-channel coding (JSCC) has shown excellent performance in image and feature transmission. However, the output values of the JSCC encoder are continuous, which makes the constellation of modulation complex and dense. It is hard and expensive to design radio frequency chains for transmitting such full-resolution constellation points. In this paper, two methods of mapping the full-resolution constellation to finite constellation are proposed for real system implementation. The constellation mapping results of the proposed methods correspond to regular constellation…
As a green and secure wireless transmission method, secure spatial modulation (SM) is becoming a hot research area. Its basic idea is to exploit both the index of activated transmit antenna and amplitude phase modulation signal to carry messages, improve security, and save energy. In this paper, we review its crucial challenges: transmit antenna selection (TAS), artificial noise (AN) projection, power allocation (PA) and joint detection at the desired receiver. As the size of signal constellation tends to medium-scale or large-scale, the complexity of traditional maximum likelihood detector be…
The Rate-Distortion-Perception-Classification Tradeoff: Joint Source Coding and Modulation via Inverse-Domain GANs
School of Informatics, Xiamen University（厦门大学信息学院）；School of Electronics and Information Engineering, Guangxi Normal University（广西师范大学电子与信息工程学院）；School of Engineering & Physical Sciences, Heriot-Watt University（赫瑞瓦特大学工程与物理科学学院）
This paper investigates the design of spatially coupled low-density parity-check (SC-LDPC) codes constructed from connected-chain ensembles for bit-interleaved coded modulation (BICM) schemes. For short coupling lengths, connecting multiple SC-LDPC chains can improve decoding performance over single-chains and impose structured unequal error protection (UEP). A joint design of connected-chain ensembles and bit mapping to further exploit the UEP from codes and high-order modulations is proposed. Numerical results demonstrate the superiority of the proposed design over existing connected-chain e…
We present a novel autoencoder-based learning of joint geometric and probabilistic constellation shaping for coded-modulation systems. It can maximize either the mutual information (for symbol-metric decoding) or the generalized mutual information (for bit-metric decoding).
