Joint Adaptive Modulation Coding and Cooperative ARQ over Relay Channels-Applications to Land Mobile Satellite Communications
Morteza Mardani, Jalil S. Harsini, Farshad Lahouti, Behrouz Eliasi
备注：
24 pages, 7 figures, 1 table, Submitted to the International Journal on Wireless Communications and Mobile Computing, Wiley & Sons, Submitted July 2008
In a cooperative relay network, a relay node (R) facilitates data transmission to the destination node (D), when the latter is unable to decode the source node (S) data correctly. This paper considers such a system model and presents a cross-layer approach to jointly design adaptive modulation and coding (AMC) at the physical layer and cooperative truncated automatic repeat request (ARQ) protocol at the data link layer. We first derive a closed form expression for the spectral efficiency of the joint cooperative ARQ-AMC scheme. Aiming at maximizing this performance measure, we then optimize two AMC schemes for S-D and R-D links, which directly satisfy a prescribed packet loss rate constraint. As an interesting application, we also consider the problem of joint link adaptation and blockage mitigation in land mobile satellite communications (LMSC). We also present a new relay-assisted transmission protocol for LMSC, which delivers the source data to the destination via the relaying link, when the S-D channel is in outage. Numerical results indicate that the proposed schemes noticeably enhances the spectral efficiency compared to a system, which uses a conventional ARQ-AMC scheme at the S-D link, or a system which employs an optimized fixed rate cooperative-ARQ protocol.
This paper investigates the performance of relay networks in the presence of hybrid automatic repeat request (ARQ) feedback and adaptive power allocation. The throughput and the outage probability of different hybrid ARQ protocols are studied for independent and spatially-correlated fading channels. The results are obtained for the cases where there is a sum power constraint on the source and the relay or when each of the source and the relay are power-limited individually. With adaptive power allocation, the results demonstrate the efficiency of relay-ARQ techniques in different conditions.
In this paper, novel cooperative automatic repeat request (ARQ) methods with network coding are proposed for two way relaying network. Upon a failed transmission of a packet, the network enters cooperation phase, where the retransmission of the packets is aided by the relay node. The proposed approach integrates network coding into cooperative ARQ, aiming to improve the network throughput by reducing the number of retransmissions. For successive retransmission, three different methods for choosing the retransmitting node are considered. The throughput of the methods are analyzed and compared. …
Incorporating relaying techniques into Automatic Repeat reQuest (ARQ) mechanisms gives a general impression of diversity and throughput enhancements. Allowing overhearing among multiple relays is also a known approach to increase the number of participating relays in ARQs. However, when opportunistic amplify-and-forward (AF) relaying is applied to cooperative ARQs, the system design becomes nontrivial and even involved. Based on outage analysis, the spatial and temporal diversities are first found sensitive to the received signal qualities of relays, and a link quality control mechanism is the…
This paper presents a cross-layer approach to jointly design adaptive modulation and coding (AMC) at the physical layer and cooperative truncated automatic repeat request (ARQ) protocol at the data link layer. We first derive an exact closed form expression for the spectral efficiency of the proposed joint AMC-cooperative ARQ scheme. Aiming at maximizing this system performance measure, we then optimize an AMC scheme which directly satisfies a prescribed packet loss rate constraint at the data-link layer. The results indicate that utilizing cooperative ARQ as a retransmission strategy, noticea…
The cooperative automatic repeat request (C-ARQ) is a link layer relaying protocol which exploits the spatial diversity and allows the relay node to retransmit the source data packet to the destination, when the latter is unable to decode the source data correctly. This paper presents a cross-layer link adaptation design for C-ARQ based relay channels in which both source and relay nodes employ adaptive modulation coding and power adaptation at the physical layer. For this scenario, we first derive closed-form expressions for the system spectral efficiency and average power consumption. We the…
This paper develops a contention-based opportunistic feedback technique towards relay selection in a dense wireless network. This technique enables the forwarding of additional parity information from the selected relay to the destination. For a given network, the effects of varying key parameters such as the feedback probability are presented and discussed. A primary advantage of the proposed technique is that relay selection can be performed in a distributed way. Simulation results find its performance to closely match that of centralized schemes that utilize GPS information, unlike the prop…
In this paper, we study the performance of the downlink of a cellular network with automatic repeat-request (ARQ) and a half duplex decode-and-forward shared relay. In this system, two multiple-input-multiple-output (MIMO) base stations serve two single antenna users. A MIMO shared relay retransmits the lost packets to the target users. First, we study the system with direct retransmission from the base station and derive a closed form expression for the outage probability of the system.We show that the direct retransmission can overcome the fading, however, it cannot overcome the interference…
This paper presents a decentralized relay selection protocol for a dense wireless network and describes channel feedback strategies that improve its performance. The proposed selection protocol supports hybrid automatic-repeat-request transmission where relays forward parity information to the destination in the event of a decoding error. Channel feedback is employed for refining the relay selection process and for selecting an appropriate transmission mode in a proposed adaptive modulation transmission framework. An approximation of the throughput of the proposed adaptive modulation strategy …
This paper addresses robust communication on a fading relay channel in which the relay is connected to the decoder via an out-of-band digital link of limited capacity. Both the source-to-relay and the source-to-destination links are subject to fading gains, which are generally unknown to the encoder prior to transmission. To overcome this impairment, a hybrid automatic retransmission request (HARQ) protocol is combined with multi-layer broadcast transmission, thus allowing for variable-rate decoding. Moreover, motivated by cloud radio access network applications, the relay operation is limited…
In this paper, the average successful throughput, i.e., goodput, of a coded 3-node cooperative network is studied in a Rayleigh fading environment. It is assumed that a simple automatic repeat request (ARQ) technique is employed in the network so that erroneously received codeword is retransmitted until successful delivery. The relay is assumed to operate in either amplify-and-forward (AF) or decode-and-forward (DF) mode. Under these assumptions, retransmission mechanisms and protocols are described, and the average time required to send information successfully is determined. Subsequently, th…
This paper studies the problem of relay-assisted user scheduling for downlink wireless transmission. The base station or access point employs hybrid automatic-repeat-request (HARQ) with the assistance of a set of fixed relays to serve a set of mobile users. By minimizing a cost function of the queue lengths at the base station and the number of retransmissions of the head-of-line packet for each user, the base station can schedule an appropriate user in each time slot and an appropriate transmitter to serve it. It is shown that a priority-index policy is optimal for a linear cost function with…
We consider a half-duplex wireless relay network with hybrid-automatic retransmission request (HARQ) and Rayleigh fading channels. In this paper, we analyze the outage probability of the multi-relay delay-limited HARQ system with opportunistic relaying scheme in decode-and-forward mode, in which the \emph{best} relay is selected to transmit the source's regenerated signal. A simple and distributed relay selection strategy is proposed for multi-relay HARQ channels. Then, we utilize the non-orthogonal cooperative transmission between the source and selected relay for retransmitting of the source…
In this paper, we consider a three node relay network comprising a source, a relay, and a destination. The source transmits the message to the destination using hybrid automatic repeat request (HARQ) with incremental redundancy (IR). The relay overhears the transmitted message, amplifies it using a variable gain amplifier, and then forwards the message to the destination. This latter combines both the source and the relay message and tries to decode the information. In case of decoding failure, the destination sends a negative acknowledgement. A new replica of the message containing new parity…
The performance of the automatic repeat request-dynamic decode and forward (ARQ-DDF) cooperation protocol is analyzed in two distinct scenarios. The first scenario is the multiple access relay (MAR) channel where a single relay is dedicated to simultaneously help several multiple access users. For this setup, it is shown that the ARQ-DDF protocol achieves the optimal diversity multiplexing tradeoff (DMT) of the channel. The second scenario is the cooperative vector multiple access (CVMA) channel where the users cooperate in delivering their messages to a destination equipped with multiple rece…
Automatic Repeat Request (ARQ) is an effective technique for reliable transmission of packets in wireless networks. In ARQ, however, only a few erroneous bits in a packet will cause the entire packet to be discarded at the receiver. In this case, it's wasteful to retransmit the correct bit in the received packet. The partial packet recovery only retransmits the unreliable decoded bits in order to increase the throughput of network. In addition, the cooperative transmission based on Interleave-division multiple-access (IDMA) can obtain diversity gains with multiple relays with different locatio…
Relay networks aid in increasing the rate of communication from source to destination. However, the capacity of even a three-terminal relay channel is an open problem. In this work, we propose a new lower bound for the capacity of the three-terminal relay channel with destination-to-source feedback in the presence of correlated noise. Our lower bound improves on the existing bounds in the literature. We then extend our lower bound to general relay network configurations using an arbitrary number of filter-and-forward relay nodes. Such network configurations are common in many multi-hop communi…
This paper investigates the information freshness of two-way relay networks (TWRN) operated with physical-layer network coding (PNC). Information freshness is quantified by age of information (AoI), defined as the time elapsed since the generation time of the latest received information update. PNC reduces communication latency of TWRNs by turning superimposed electromagnetic waves into network-coded messages so that end users can send update packets to each other via the relay more frequently. Although sending update packets more frequently is potential to reduce AoI, how to deal with packet …
We analyze the performance of amplify-and-forward (AF) automatic repeat request (ARQ) for a two-hop cooperative system with reliability constrains. For this setup, we first derive the closed-form outage probability expression. Next, we present a power allocation scheme that allows us to achieve a target outage probability, while minimizing the outage-weighted average power expenditure for asymmetric power allocation between the source and relay. This is cast as an optimization problem, and the optimal power allocation (OPA) is obtained in closed form by invoking the Karush-Kuhn-Tucker (KKT) co…
Cooperative hybrid-ARQ (HARQ) protocols, which can exploit the spatial and temporal diversities, have been widely studied. The efficiency of cooperative HARQ protocols is higher than that of cooperative protocols, because retransmissions are only performed when necessary. We classify cooperative HARQ protocols as three decode-and-forward based HARQ (DF-HARQ) protocols and two amplified-and-forward based (AF-HARQ) protocols. To compare these protocols and obtain the optimum parameters, two unified frameworks are developed for protocol analysis. Using the frameworks, we can evaluate and compare …
In this paper, the throughput of relay networks with multiple source-destination pairs under queueing constraints has been investigated for both variable-rate and fixed-rate schemes. When channel side information (CSI) is available at the transmitter side, transmitters can adapt their transmission rates according to the channel conditions, and achieve the instantaneous channel capacities. In this case, the departure rates at each node have been characterized for different system parameters, which control the power allocation, time allocation and decoding order. In the other case of no CSI at t…
It has been shown that a decentralized relay selection protocol based on opportunistic feedback from the relays yields good throughput performance in dense wireless networks. This selection strategy supports a hybrid-ARQ transmission approach where relays forward parity information to the destination in the event of a decoding error. Such an approach, however, suffers a loss compared to centralized strategies that select relays with the best channel gain to the destination. This paper closes the performance gap by adding another level of channel feedback to the decentralized relay selection pr…
In this paper, we study two-way relay networks (TWRNs) in which two source nodes exchange their information via a relay node indirectly in Rayleigh fading channels. Both Amplify-and-Forward (AF) and Decode-and-Forward (DF) techniques have been analyzed in the TWRN employing a Markov chain model through which the network operation is described and investigated in depth. Automatic Repeat-reQuest (ARQ) retransmission has been applied to guarantee the successful packet delivery. The bit energy consumption and goodput expressions have been derived as functions of transmission rate in a given AF or …
We consider a linear multi-hop network composed of multi-state discrete-time memoryless channels over each hop, with orthogonal time-sharing across hops under a half-duplex relaying protocol. We analyze the probability of error and associated reliability function \cite{Gallager68} over the multi-hop network; with emphasis on random coding and sphere packing bounds, under the assumption of point-to-point coding over each hop. In particular, we define the system reliability function for the multi-hop network and derive lower and upper bounds on this function to specify the reliability-optimal op…
Channel coding alone is not sufficient to reliably transmit a message of finite length $K$ from a source to one or more destinations as in, e.g., file transfer. To ensure that no data is lost, it must be combined with rateless erasure correcting schemes on a higher layer, such as a time-division multiple access (TDMA) system paired with automatic repeat request (ARQ) or random linear network coding (RLNC). We consider binary channel coding on a binary symmetric channel (BSC) and q-ary RLNC for erasure correction in a star network, where Y sources send messages to each other with the help of a …
