Switching voltage of first-order metal-insulator transition (MIT) in VO_2, an inhomogeneous strongly correlated system, is changed by irradiating an infrared light with wavelength, 1.5 micrometer, and applying the electric field (photo-induced switching). This was predicted in the hole-driven MIT theory in which hole doping of a low concentration below 0.01% into conduction band (Fermi surface) induces the abrupt MIT as correlation effect. The switching is explained by the Mott transition not the Peierls transition.
Resistive switching can be achieved in a Mott insulator by applying current/voltage, which triggers an insulator-metal transition (IMT). This phenomenon is key for understanding IMT physics and developing novel memory elements and brain-inspired technology. Despite this, the roles of electric field and Joule heating in the switching process remain controversial. We resolve this issue by studying nanowires of two archetypical Mott insulators - VO2 and V2O3. Our findings show a crossover between two qualitatively different regimes. In one, the IMT is driven by Joule heating to the transition tem…
$VO_2$ undergoes the insulator-metal transition (IMT) and monoclinic-rutile structural phase transition (SPT) near $67^oC$. The IMT switching has many applications. However, there is an unresolved issue whether the IMT is a Mott transition or a Peierls transition. This complication is caused by metal and insulator coexistence, which is an inherent property of the IMT region. Thus, the acquired data in the IMT region are averaged over the two phases in many experiments. We overcome the issue by probing the electronic state of the monoclinic structure and by introducing a model that accounts for…
The fundamental building blocks of modern silicon-based microelectronics, such as double gate transistors in non-volatile Flash memories, are based on the control of electrical resistance by electrostatic charging. Flash memories could soon reach their miniaturization limits mostly because reliably keeping enough electrons in an always smaller cell size will become increasingly difficult . The control of electrical resistance at the nanometer scale therefore requires new concepts, and the ultimate resistance-change device is believed to exploit a purely electronic phase change such as the Mott…
Mott transitions induced by strong electric fields are receiving a growing interest. Recent theoretical proposals have focused on the Zener dielectric breakdown in Mott insulators, however experimental studies are still too scarce to conclude about the mechanism. Here we report a study of the dielectric breakdown in the narrow gap Mott insulators GaTa$_4$Se$_{8-x}$Te$_x$. We find that the I-V characteristics and the magnitude of the threshold electric field (E$_{th}$) do not correspond to a Zener breakdown, but rather to an avalanche breakdown. E$_{th}$ increases as a power law of the Mott Hub…
Mott-Hubbard and Hund electron correlations have been realized thus far in separate classes of materials. Here, we show that a single moiré homobilayer encompasses both kinds of physics in a controllable manner. We develop a microscopic multiband model that we solve by dynamical mean-field theory to nonperturbatively address the local many-body correlations. We demonstrate how tuning with twist angle, dielectric screening, and hole density allows us to switch between Mott-Hubbard and Hund correlated states in a twisted WSe$_2$ bilayer. The underlying mechanism is based on controlling Coulomb-i…
We propose the concept of "hybridization-switching induced Mott transition" which is relevant to a broad class of ABO$_3$ perovskite materials including BiNiO$_3$ and PbCrO$_3$ which feature extended $6s$ orbitals on the A-site cation (Bi or Pb), and A-O covalency induced ligand holes. Using {\it ab initio} electronic structure and slave rotor theory calculations, we show that such systems exhibit a breathing phonon driven A-site to oxygen hybridization-wave instability which conspires with strong correlations on the B-site transition metal ion (Ni or Cr) to induce a Mott insulator. These Mott…
Quantum states of strongly correlated electrons are of prime importance to understand exotic properties of condensed matter systems and the controllability over those states promises unique electronic devices such as a Mott memory. As a recent example, a ultrafast switching device was demonstrated using the transition between the correlated Mott insulating state and a hidden-order metallic state of a layered transition metal dichalcogenides 1T-TaS2. However, the origin of the hidden metallic state was not clear and only the macroscopic switching by laser pulse and carrier injection was reporte…
We study the electronic structure, magnetic state, and phase stability of paramagnetic BiNiO$_3$ near a pressure-induced Mott insulator-to-metal transition (MIT) by employing a combination of density functional and dynamical mean-field theory. We obtain that BiNiO$_3$ exhibits an anomalous negative-charge-transfer insulating state, characterized by charge disproportionation of the Bi $6s$ states, with Ni$^{2+}$ ions. Upon a compression of the lattice volume by $\sim$4.8\%, BiNiO$_3$ is found to make a Mott MIT, accompanied by the change of crystal structure from triclinic $P\bar{1}$ to orthorh…
Metal-insulator transitions (MIT) belong to a class of fascinating physical phenomena, which includes superconductivity, and colossal magnetoresistance (CMR), that are associated with drastic modifications of electrical resistance. In transition metal compounds, MIT are often related to the presence of strong electronic correlations that drive the system into a Mott insulator state. In these systems the MIT is usually tuned by electron doping or by applying an external pressure. However, it was noted recently that a Mott insulator should also be sensitive to other external perturbations such a…
Experiments performed over the last twenty years have revealed striking similarities between several two-dimensional (2D) fermion systems, including diluted two-dimensional electron liquids in semiconductors, 3He monolayers, and layered organic charge-transfer salts. These experimental results, together with recent theoretical advances, provide compelling evidence that strong electronic correlations - Wigner-Mott physics - dominate the universal features of the corresponding metal-insulator transitions (MIT). Here we review the recent theoretical work exploring quantum criticality of Mott and …
Photoinduced phase switching at a Mott insulator-to-metal transition
Max Planck Institute for Solid State Research（马克斯·普朗克固体研究所）；Institute for Beam Physics and Technology, Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院束流物理与技术研究所）
Recently, application of electric field (E-field) has received considerable attention as a new method to induce novel quantum phenomena since application of E-field can tune the electronic states directly with obvious scientific and industrial advantages over other turning methods. However, E-field-induced Mott transitions are rare and typically require high E-field and low temperature. Here we report that the multiband Mott insulator Ca2RuO4 shows unique insulator-metal switching induced by applying a dry-battery level voltage at room temperature. The threshold field Eth ~40 V/cm is much weak…
A metal can be driven to an insulating phase through distinct mechanisms. A possible way is via the Coulomb interaction, which then defines the Mott metal-insulator transition (MIT). Another possibility is the MIT driven by disorder, the so-called Anderson MIT. Here we analyze interacting particles in disordered Hubbard chains $-$ thus comprising the Mott-Anderson physics $-$ by investigating the ground-state entanglement with density functional theory. The localization signature on entanglement is found to be a local minimum at a certain critical density. Individually, the Mott (Anderson) MIT…
The insulator-to-metal transition in Mott insulators is the key mechanism for a novel class of electronic devices, belonging to the Mottronics family. Intense research efforts are currently devoted to the development of specific control protocols, usually based on the application of voltage, strain, pressure and light excitation. The ultimate goal is to achieve the complete control of the electronic phase transformation, with dramatic impact on the performance, for example, of resistive switching devices. Here, we investigate the simultaneous effect of external voltage and excitation by ultras…
The lattice response of a prototype Mott insulator, SmTiO3, to hole doping is investigated with atomic-scale spatial resolution. SmTiO3 films are doped with Sr on the Sm site with concentrations that span the insulating and metallic sides of the filling-controlled Mott metal-insulator transition (MIT). The GdFeO3-type distortions are investigated using an atomic resolution scanning transmission electron microscopy technique that can resolve small lattice distortions with picometer precision. We show that these distortions are gradually and uniformly reduced as the Sr concentration is increased…
High-quality epitaxial SrVO3 (SVO) thin films of various thicknesses were grown on (001)-oriented LSAT substrates by pulsed electron-beam deposition technique. Thick SVO films (~25 nm) exhibited metallic behavior with the electrical resistivity following the T2 law corresponding to a Fermi liquid system. We observed a temperature driven metal-insulator transition (MIT) in SVO ultrathin films with thicknesses below 6.5 nm, the transition temperature TMIT was found to be at 50 K for the 6.5 nm film, 120 K for the 5.7 nm film and 205 K for the 3 nm film. The emergence of the observed MIT can be a…
For inhomogeneous high-T_c superconductors, hole-driven metal-insulator transition (MIT) theory explains that the gradual increase of conductivity with increasing hole doping is due to inhomogeneity with the local Mott system undergoing the first-order MIT and the local non-Mott system. For VO_2, a monoclinic and correlated metal (MCM) phase showing the linear characteristic as evidence of the Mott MIT is newly observed by applying electric field and temperature. The structural phase transition occurs between MCM and Rutile metal phases. Devices using the MIT are named MoBRiK.
We have investigated a contribution of the density of state (DOS) to the Mott metal-insulator transition (MIT). The MIT condition is given by the DOS, which usually requires the complicated fundamental equations. To simplify the process, we have derived a general solution of the MIT condition by an integral contains the DOS in the framework of coherent potential approximation. The formula is concise and presents the direct relationship between the MIT condition and the DOS. It is able to calculate the contribution quantitatively and to compare various DOSs analytically.
By comparing the responses to an in-plane magnetic field near the metal-insulator transition (MIT), we find that the observed MIT in Si MOSFETs can be described by the non-perturbative Mott-Hubbard scenario. Interrelations between independent measurables are uncovered and confirmed by replotting the experimental data. A universal critical energy scale vanishing at the MIT is extracted from the experimental data and the critical exponent found.
We consider an interaction-driven scenario for the two-dimensional metal-insulator transition in zero magnetic field (2D-MIT), based on melting the Wigner crystal through vacancy-interstitial pair formation. We show that the transition from the Wigner-Mott insulator to a heavy Fermi liquid emerges as an instability to self-doping, resembling conceptually the solid to normal liquid transition in He3. The resulting physical picture naturally explains many puzzling features of the 2D-MIT.
We study the doping driven Mott metal-insulator transition (MIT) in the periodic Anderson model set in the Mott-Hubbard regime. A striking asymmetry for electron or hole driven transitions is found. The electron doped MIT at larger U is similar to the one found in the single band Hubbard model, with a first order character due to coexistence of solutions. The hole doped MIT, in contrast, is second order and can be described as the delocalization of Zhang-Rice singlets.
We study the controlled manipulation of the Jahn-Teller metal state of fulleride compounds using nonequilibrium dynamical mean field theory. This anomalous metallic state is a spontaneous orbital-selective Mott phase, which is characterized by one metallic and two insulating orbitals. Using protocols based on transiently reduced hopping amplitudes or periodic electric fields, we demonstrate the possibility to switch orbitals between Mott insulating and metallic on a sub-picosecond timescale, and to rotate the order parameter between three equivalent states that can be distinguished by their an…
The temperature dependence of the Mott metal-insulator transition (MIT) is studied with a VO_2-based two-terminal device. When a constant voltage is applied to the device, an abrupt current jump is observed with temperature. With increasing applied voltages, the transition temperature of the MIT current jump decreases. We find a monoclinic and electronically correlated metal (MCM) phase between the abrupt current jump and the structural phase transition (SPT). After the transition from insulator to metal, a linear increase in current (or conductivity) is shown with temperature until the curren…
The transition voltage of an abrupt metal-insulator transition (MIT), observed by applying an electric field to two-terminal devices fabricated on a Mott insulator VO_2 film, decreases with increasing temperature up to 334K. The abrupt current jump disappears above 334 K near the MIT temperature. These results suggest that the mechanism of the abrupt MIT induced by temperature is the same as that by an electric field. The magnitude of the current jump (a large current) decreases with increasing external resistance; this is an important observation in terms of applying the abrupt MIT to device …
Transition metal phosphorous trichalcogenides, $M{\rm P}X_3$ ($M$ and $X$ being transition metal and chalcogen elements respectively), have been the focus of substantial interest recently because of their possible magnetism in the two-dimensional limit. Here we investigate material properties of the compounds with $M$ = Mn and Ni employing $\textit{ab-initio}$ density functional and dynamical mean-field calculations, especially their electronic behavior under external pressure in the paramagnetic phase. Mott metal-insulator transitions (MIT) are found to be a common feature for both compounds,…
In femtosecond pump-probe measurements, the appearance of coherent phonon oscillations at 4.5 THz and 6.0 THz indicating the rutile metal phase of VO_2 does not occur simultaneously with the first-order metal-insulator transition (MIT) near 68^oC. The monoclinic and correlated metal(MCM) phase between the MIT and the structural phase transition (SPT) is generated by a photo-assisted hole excitation which is evidence of the Mott transition. The SPT between the MCM phase and the rutile metal phase occurs due to subsequent Joule heating. The MCM phase can be regarded as an intermediate non-equili…
Transition metal oxides such as vanadium dioxide (VO$_2$), niobium dioxide (NbO$_2$), and titanium sesquioxide (Ti$_2$O$_3$) are known to undergo a temperature-dependent metal-insulator transition (MIT) in conjunction with a structural transition within their bulk. However, it is not typically discussed how breaking crystal symmetry via surface termination affects the complicated MIT physics. Using synchrotron-based x-ray spectroscopy, low energy electron diffraction (LEED), low energy electron microscopy (LEEM), transmission electron microscopy (TEM), and several other experimental techniques…
An abrupt Mott metal-insulator transition (MIT) rather than the continuous Hubbard MIT near a critical on-site Coulomb energy U/U_c=1 is observed for the first time in VO_2, a strongly correlated material, by inducing holes of about 0.018% into the conduction band. As a result, a discontinuous jump of the density of states on the Fermi surface is observed and inhomogeneity inevitably occurs. The gate effect in fabricated transistors is clear evidence that the abrupt MIT is induced by the excitation of holes.
Tuning the electronic properties of a matter is of fundamental interest in scientific research as well as in applications. Recently, the Mott insulator-metal transition has been reported in a pristine layered transition metal dichalcogenides 1T-TaS$_2$, with the transition triggered by an optical excitation, a gate controlled intercalation, or a voltage pulse. However, the sudden insulator-metal transition hinders an exploration of how the transition evolves. Here, we report the strain as a possible new tuning parameter to induce Mott gap collapse in 1T-TaS$_2$. In a strain-rich area, we find …
Oxygen vacancies are a common source of excess electrons in complex oxides. In Mott insulators these additional electrons can induce a metal-insulator transition (MIT), fundamentally altering the electronic properties of the system. Here we study the effect of oxygen vacancies in LaTiO3, a prototypical Mott insulator close to the MIT. We show that the introduction of oxygen vacancies creates a vacancy-related band immediately below the partially filled Ti-t2g bands. We study the effect of this additional band on the Mott MIT using a combination of density functional theory and dynamical mean-f…
We have performed high-resolution hard X-ray photoemission spectroscopy for the metal-insulator transition (MIT) system (V(1-x)Cr(x))2O3 in the paramagnetic metal, paramagnetic insulator and antiferromagentic insulator phases. The quality of the spectra enables us to conclude that the on-site Coulomb energy U does not change through the MIT, which eliminate all but one theoretical MIT scenario in this paradigm material.
Disorder has intriguing consequences for correlated electronic materials, which include several families of high-temperature superconductors and resistive switching systems. We address the question of why strongly correlated d-wave superconductors, such as the cuprates, prove to be surprisingly robust against the introduction of non-magnetic impurities. We show that, very generally, both the pair-breaking and the normal state transport scattering rates are significantly suppressed by strong correlations effects arising in the proximity to a Mott insulating state. We also show that the correlat…
Light-manipulation of correlated electronic phases in solids offers the tantalizing prospect of realizing electronic devices operating at the ultrafast time-scale. In this context, the experimental realization of non-equilibrium transitions from a metal to a band or Mott insulator has shown to be particularly elusive. Using dynamical mean-field theory, we study a simple model representing the main physical properties of the oxygen-enriched compound LaTiO$_{3+x}$. By properly optimizing the photo-doping of electrons from a low-energy band into the valence states of the system, we show it is pos…
For a strongly correlated material, VO2, near a critical on-site Coulomb energy U/Uc=1, the abrupt Mott metal-insulator transition (MIT) rather than the continuous Hubbard MIT is observed by inducing internal optical phonon-coupled holes (hole inducing of 0.018%) into conduction band, with a gate field of fabricated transistors. Observed gate effects, change of the MIT drain-source voltage caused by a gate field, are the effect of measurement due to inhomogeneity of channel material and is an average over the measurement region of the true gate effect based on the large conductivity (or effect…
By applying a multi-stage real-space renormalization group procedure to Hubbard model, we examine the finite-size scaling in Mott metal-insulator transition(MIT) on a non-partite lattice. It is found that there exists a critic point U/t=12.5 for the MIT and the corresponding critical exponent for correlation length niu= 1 and the dynamic exponent z = 0.91 are obtained. On the critical point, the charge gap scales with the system size as Delta-g~1/L^0.91.
We analyze the unanalytical structure of metal-insulator transition (MIT) in infinite dimensions. By introducing a simple transformation into the dynamical mean-field equation of Hubbard model, a multiple-valued structure in Green's function and other thermodynamical quantities with respect to the interaction strength $U$ are found at low temperatures. A unified description of stable, metastable and unstable phases is obtained in the regime $U_{c1}(T)<U<U_{c2}(T)$, and the Maxwell construction is performed to evaluate the MIT line $U^{\ast}(T)$. We show how the first-order MIT at $U^{\ast}(T)$…
We report on the dramatic slowing down of the charge carrier dynamics in a quasi-two-dimensional organic conductor, which can be reversibly tuned through the Mott metal-insulator transition (MIT). At the finite-temperature critical endpoint we observe a divergent increase of the resistance fluctuations accompanied by a drastic shift of spectral weight to low frequencies, demonstrating the critical slowing down of the order parameter (doublon density) fluctuations. The slow dynamics is accompanied by non-Gaussian fluctuations, indicative of correlated charge carrier dynamics. A possible explana…
We present the carrier transport properties in the vicinity of a doping-driven Mott transition observed at a field-effect transistor (FET) channel using a single crystal of the typical two-dimensional organic Mott insulator $κ$-(BEDT-TTF)$_2$CuN(CN)$_2$Cl ($κ$-Cl).The FET shows a continuous metal$-$insulator transition (MIT) as electrostatic doping proceeds. The phase transition appears to involve two-step crossovers, one in Hall measurement and the other in conductivity measurement. The crossover in conductivity occurs around the conductance quantum $e^2/h$ , and hence is not associated with …
We study a bandwidth controlled Mott metal-insulator transition (MIT) between a Fermi liquid metal and a quantum spin-liquid insulator at half-filling in three dimensions (3D). Using a slave rotor approach, and incorporating gauge field fluctuations, we find a continuous MIT and discuss the finite temperature crossovers around this critical point. We show that the specific heat C=T ln ln (1/T) at the MIT and argue that the electrical transport on the metallic side near the transition should exhibit a `conductivity minimum' as a function of temperature. A possible candidate to test these predic…
We employ density functional theory plus dynamical mean field theory and identify the physical origin of why two layers of SrVO$_3$ on a SrTiO$_3$ substrate are insulating: the thin film geometry lifts the orbital degeneracy which in turn triggers a Mott-Hubbard transition. Two layers of SrVO$_3$ are just at the verge of a Mott-Hubbard transition and hence ideally suited for technological applications of the Mott-Hubbard transition: the heterostructure is highly sensitive to strain, electric field, and temperature. A gate voltage can also turn the insulator into a metal, so that a transistor w…
We present a temperature-dependent x-ray absorption (XAS) and resonant elastic x-ray scattering (REXS) study of the metal-insulator transition (MIT) in Sr3(Ru1-xMnx)2O7. The XAS results reveal that the MIT drives the onset of local antiferromagnetic correlations around the Mn impurities, a precursor of the long-range antiferromagnetism detected by REXS at T_order<T_MIT. This establishes that the MIT is of the Mott-type (electronic correlations) as opposed to Slater-type (magnetic order). While this behavior is induced by Mn impurities, the (1/4,1/4,0) order exists for a wide range of Mn concen…
One of today's most exciting research frontier and challenge in condensed matter physics is known as Mottronics, whose goal is to incorporate strong correlation effects into the realm of electronics. In fact, taming the Mott insulator-to-metal transition (IMT), which is driven by strong electronic correlation effects, holds the promise of a commutation speed set by a quantum transition, and with negligible power dissipation. In this context, one possible route to control the Mott transition is to electrostatically dope the systems using strong dielectrics, in FET-like devices. Another possibil…
Based on dynamical cluster approximation (DCA) quantum Monte Carlo simulations, we study the interaction-driven Mott metal-insulator transition (MIT) in the half-filled Hubbard model on the anisotropic two-dimensional triangular lattice, where the degree of frustration is varied between the unfrustrated case and the fully frustrated, isotropic triangular lattice. Upon increasing the DCA cluster size, we analyze the evolution of the MIT phase boundary as a function of frustration in the phase diagram spanned by the interaction strength and temperature, and provide a quantitative description of …
The metal-insulator transition (MIT) is one of the most dramatic manifestations of electron correlations in materials. Various mechanisms producing MITs have been extensively considered, including the Mott (electron localization via Coulomb repulsion), Anderson (localization via disorder) and Peierls (localization via distortion of a periodic 1D lattice). One additional route to a MIT proposed by Slater, in which long-range magnetic order in a three dimensional system drives the MIT, has received relatively little attention. Using neutron and X-ray scattering we show that the MIT in NaOsO3 is …
A strongly correlated Mott first-order metal-insulator transition (MIT) (or Jump) not accompanied by the structural phase transition (SPT) was clearly revealed in VO_2, (New J. Phys. 6 (1004) 52, Appl. Phys. Lett. 86 (2005) 242101, Physica B 369 (2005) 76). In order to re-confirm the MIT for a VO_2-based device with a narrow width of 3 micrmeter and a length of 20 micrometer such as a rod (Fig. A), both phonon peaks (Fig. B) by a micro-Raman scattering with a laser beam of about 5 micrometer and the MIT with jump in I-V curve (Fig. C) were simultaneously measured. A device like a rod has less …
V2O3 is the prototype system for the Mott transition, one of the most fundamental phenomena of electronic correlation. Temperature, doping or pressure induce a metal to insulator transition (MIT) between a paramagnetic metal (PM) and a paramagnetic insulator (PI). This or related MITs have a high technological potential, among others for intelligent windows and field effect transistors. However the spatial scale on which such transitions develop is not known in spite of their importance for research and applications. Here we unveil for the first time the MIT in Cr-doped V2O3 with submicron lat…
Despite decades of experimental and theoretical efforts, the origin of metal-insulator transitions (MIT) in strongly-correlated materials is one of the main longstanding problems in condensed matter physics. An archetypal example is V2O3, where electronic, structural and magnetic phase transitions occur simultaneously. This remarkable concomitance makes the understanding of the origin of the MIT a challenge due to the many degrees of freedom at play. In this work, we demonstrate that magnetism plays the key dominant role. By acting on the magnetic degree of freedom, we reveal an anomalous beha…
We present the influence of spin correlation on the metal-insulator transitions (MIT) in two-orbital Hubbard models by the Kotliar-Ruckenstein slave-boson approach. In the asymmetric half-filling situation, the two orbits simultaneously transit from conducting to insulating states with the increase of Coulomb correlation, accompanied by a paramagnetic (PM)-antiferromagnetic (AFM) transition. The orbital selective Mott transition found in the PM condition is completely suppressed over a wide correlation range, though it may exist in the systems away from half-filling. In the insulating state, t…
Metamagnetism in antiferromagnets exhibits distinct critical behaviors and dynamics when invoking spin reversal and rotation. Here we show a 0.05% anisotropic strain suffices to in-situ modulate the metamagnetic critical field of the Mott insulator Sr2IrO4 by over 50%, enabling electrical switching of the transition. Resonant x-ray scattering and model simulation reveal that the transition is completely tuned from the spin-flop to spin-flip type as the strain introduces C4-symmetry-breaking magnetic anisotropy. Simultaneous transport study indicates the metamagnetic responses are reflected in …
