Quantum correlations as the resource for quantum communication can be distributed over long distances by quantum repeaters. In this Letter, we introduce the notion of a noisy quantum repeater, and examine its role in quantum communication. Quantum correlations shared through noisy quantum repeaters are then characterized and their secrecy properties are studied. Remarkably, noisy quantum repeaters naturally introduce private states in the key distillation scenario, and consequently key distillation protocols are demonstrated to be more tolerant.
Quantum network coding is an effective solution for alleviating bottlenecks in quantum networks. We introduce a measurement-based quantum network coding scheme for quantum repeater networks (MQNC), and analyze its behavior based on results acquired from Monte-Carlo simulation that includes various error sources over a butterfly network. By exploiting measurement-based quantum computing, operation on qubits for completing network coding proceeds in parallel. We show that such an approach offers advantages over other schemes in terms of the quantum circuit depth, and therefore improves the commu…
We study entanglement creation over global distances based on a quantum repeater architecture that uses low-earth orbit satellites equipped with entangled photon sources, as well as ground stations equipped with quantum non-demolition detectors and quantum memories. We show that this approach allows entanglement creation at viable rates over distances that are inaccessible via direct transmission through optical fibers or even from very distant satellites.
We extend the relation between absolutely maximally entangled (AME) states and quantum maximum distance separable (QMDS) codes by constructing whole families of QMDS codes from their parent AME states. We introduce a reduction-friendly form for the generator set of the stabilizer representation of an AME state, from which the stabilizer form for children codes, all QMDS, can be obtained. We then relate this to optimal codes for one-way quantum repeaters, by minimizing the short-term infrastructure cost as well as the long-term running cost of such quantum repeaters. We establish that AME state…
In present-day quantum communications, one of the main problems is the lack of a quantum repeater design that can simultaneously secure high rates and long distances. Recent literature has established the end-to-end capacities that are achievable by the most general protocols for quantum and private communication within a quantum network, encompassing the case of a quantum repeater chain. However, whether or not a physical design exists to approach such capacities remains a challenging objective. Driven by this motivation, in this work, we put forward a design for continuous-variable quantum r…
Recently, Briegel et al. present a quantum repeaters protocol using nest entanglement purification for long distance quantum communication(Physical Review Letters \textbf{81},5932). In this paper we present a modified scheme for constructing an optimal quantum repeater using doubly entangled photon pairs that overcomes the limitations of quantum communication via noisy channels. Based on the imperfect quantum operations and classical communications, the polarization entangled quantum channels can be built with a better efficiency.
Quantum communication is at the forefront of quantum technology, enabling the development of absolutely secure encryption, distributed quantum computing, teleportation and more. Whilst quantum communication has been experimentally demonstrated at distances on the order of hundreds of kilometers, the establishment of high-fidelity pairs shared over larger distances remains a formidable technical challenge due to attenuation. However, this may be overcome with the use of quantum repeaters. Here we propose a method to construct a robust quantum repeater network using only existing technology. Our…
In quantum communication via noisy channels, the error probability scales exponentially with the length of the channel. We present a scheme of a quantum repeater that overcomes this limitation. The central idea is to connect a string of (imperfect) entangled pairs of particles by using a novel nested purification protocol, thereby creating a single distant pair of high fidelity. The scheme tolerates general errors on the percent level.
The communication distance of QKD is limited by exponential attenuation of photons propagating through optical fibers. However, it has been shown that introducing a quantum repeater can improve the order of the attenuation and is useful for extending the communication distance of QKD when the repeater noise is ignored. In this paper, we analyze the effectiveness of the quantum repeater when taking the repeater noise into consideration. We analyze the effectiveness also from the viewpoint of the security and show that QKD is secure even if a quantum repeater is used.
We present a linear optical scheme for error-free distribution of two-photon polarization entangled Bell states over noisy channels. The scheme can be applied to an elementary quantum repeater protocol with potentially significant improvements in efficiency and system complexity. The scheme is based on the use of polarization and time-bin encoding of photons and can perform single-pair, single-step purification with currently available technology.
We propose a quantum repeater for continuous variable (CV) quantum optical states. Our repeater relies on an error correction protocol for loss on CV states based on CV teleportation and entanglement distillation via noiseless linear amplification. The error correction protocol is concatenated to preserve the same effective transmission coefficient for the quantum channel over increasing distance. The probability of successful operation of the repeater scales polynomially with distance. However, the protocol is limited by a trade-off between fidelity and probability of success.
Using 2 km of standard telecom optical fibres, we teleport qubits carried by photons of 1310 nm wavelength to qubits in another lab carried by a photons of 1550 nm wavelength. The photons to be teleported and the necessary entangled photon pairs are created in two different non-linear crystals. The measured mean fidelity is of 81.2 %. We discuss how this could be used as quantum repeaters without quantum memories.
We present a resource-performance tradeoff of an all-optical quantum repeater that uses photon sources, linear optics, photon detectors and classical feedforward at each repeater node, but no quantum memories. We show that the quantum-secure key rate has the form $R(η) = Dη^s$ bits per mode, where $η$ is the end-to-end channel's transmissivity, and the constants $D$ and $s$ are functions of various device inefficiencies and the resource constraint, such as the number of available photon sources at each repeater node. Even with lossy devices, we show that it is possible to attain $s < 1$, and i…
We propose a new approach to implement quantum repeaters for long distance quantum communication. Our protocol generates a backbone of encoded Bell pairs and uses the procedure of classical error correction during simultaneous entanglement connection. We illustrate that the repeater protocol with simple Calderbank-Shor-Steane (CSS) encoding can significantly extend the communication distance, while still maintaining a fast key generation rate.
A feasible route towards implementing long-distance quantum key distribution (QKD) systems relies on probabilistic schemes for entanglement distribution and swapping as proposed in the work of Duan, Lukin, Cirac, and Zoller (DLCZ) [Nature 414, 413 (2001)]. Here, we calculate the conditional throughput and fidelity of entanglement for DLCZ quantum repeaters, by accounting for the DLCZ self-purification property, in the presence of multiple excitations in the ensemble memories as well as loss and other sources of inefficiency in the channel and measurement modules. We then use our results to fin…
Losses of optical signals scale exponentially with the distance. Quantum repeaters are devices that tackle these losses in quantum communication by splitting the total distance into shorter parts. Today two types of quantum repeaters are subject of research in the field of quantum information: Those that use two-way communication and those that only use one-way communication. Here we explain the details of the performance analysis for repeaters of the second type. Furthermore we compare the two different schemes. Finally we show how the performance analysis generalizes to large-scale quantum n…
Quantum communication relies on the existence of entanglement between two nodes of a network. However, due to its fragile nature, it is nearly impossible to establish entanglement at large distances through the direct transmission of qubits. Quantum repeaters have been proposed to solve this problem, which split-up the network to create small-scale entangled links and then connect them up to create the large-scale link. As researchers race to establish entanglement over larger and larger distances, it becomes essential to gauge the performance and robustness of the different protocols that hav…
Quantum repeaters have been proposed as a way of extending the reach of quantum communication. First generation approaches use entanglement swapping to connect entangled links along a long distance channel. Recently, there have been proposals for first generation quantum repeaters for continuous variables. In this paper, we present an improved continuous variable repeater scheme using optimal Gaussian entanglement swapping. Our scheme uses the noiseless linear amplifier for entanglement distillation. We show that with the simplest configuration of the noiseless linear amplifier and under the a…
Quantum communications capacity using direct transmission over length-$L$ optical fiber scales as $R \sim e^{-αL}$, where $α$ is the fiber's loss coefficient. The rate achieved using a linear chain of quantum repeaters equipped with quantum memories, probabilistic Bell state measurements (BSMs) and switches used for spatial multiplexing, but no quantum error correction, was shown to surpass the direct-transmission capacity. However, this rate still decays exponentially with the end-to-end distance, viz., $R \sim e^{-s{αL}}$, with $s < 1$. We show that the introduction of temporal multiplexing …
Long-distance entanglement is a very precious resource, but its distribution is very difficult due to the exponential losses of light in optical fibres. A possible solution consists in the use of quantum repeaters, based on entanglement swapping or quantum error correction. Alternatively, satellite-based free-space optical links can be exploited, achieving better loss-distance scaling. We propose to combine these two ingredients, quantum repeaters and satellite-based links, into a scheme that allows to achieve entanglement distribution over global distances with a small number of intermediate …
We investigate the influence of memory errors in the quantum repeater scheme for long-range quantum communication. We show that the communication distance is limited in standard operation mode due to memory errors resulting from unavoidable waiting times for classical signals. We show how to overcome these limitations by (i) improving local memory, and (ii) introducing two new operational modes of the quantum repeater. In both operational modes, the repeater is run blindly, i.e. without waiting for classical signals to arrive. In the first scheme, entanglement purification protocols based on o…
Quantum network applications like distributed quantum computing and quantum secret sharing present a promising future network equipped with quantum resources. Entanglement generation and distribution over long distances is critical and unavoidable to utilize quantum technology in a fully-connected network. The distribution of bipartite entanglement over long distances has seen some progresses, while the distribution of multipartite entanglement over long distances remains unsolved. Here we report a two-dimensional quantum repeater protocol for the generation of multipartite entanglement over l…
Quantum repeaters pave the way for long-distance quantum communications and quantum Internet, and the idea of quantum repeaters is based on entanglement swapping which requires the implementation of controlled quantum gates. Frequently measuring a quantum system affects its dynamics which is known as the quantum Zeno effect (QZE). Beyond slowing down its evolution, QZE can be used to control the dynamics of a quantum system by introducing a carefully designed set of operations between measurements. Here, we propose an entanglement swapping protocol based on QZE, which achieves almost unit fide…
Higher transmission loss diminishes the performance of optical communication|be it the rate at which classical or quantum data can be sent reliably, or the secure key generation rate of quantum key distribution (QKD). Loss compounds with distance|exponentially in an optical fiber, and inverse-square with distance for a free-space channel. In order to boost classical communication rates over long distances, it is customary to introduce regenerative relays at intermediate points along the channel. It is therefore natural to speculate whether untended regenerative stations, such as phase-insensit…
We propose a hybrid quantum repeater based on ancillary coherent field states and material qubits coupled to optical cavities. For this purpose, resonant qubit-field interactions and postselective field measurements are determined which are capable of realizing all necessary two-qubit operations for the actuation of the quantum repeater. We explore both theoretical and experimental possibilities of generating near-maximally-entangled qubit pairs ($F>0.999$) over long distances. It is shown that our scheme displays moderately low repeater rates, between $5 \times 10^{-4}$ and $23$ pairs per sec…
Memory dephasing and its impact on the rate of entanglement generation in quantum repeaters is addressed. For systems that rely on probabilistic schemes for entanglement distribution and connection, we estimate the maximum achievable rate per employed memory for our optimized partial nesting protocol. We show that, for any given distance $L$, the polynomial scaling of rate with distance can only be achieved if quantum memories with coherence times on the order of $L/c$ or longer, with $c$ being the speed of light in the channel, are available. The above rate degrades as a power of $\exp[-\sqrt…
Twin-field (TF) quantum key distribution (QKD) fundamentally alters the rate-distance relationship of QKD, offering the scaling of a single-node quantum repeater. Although recent experiments have demonstrated the new opportunities for secure long-distance communications allowed by TF-QKD, formidable challenges remain to unlock its true potential. Previous demonstrations have required intense stabilisation signals at the same wavelength as the quantum signals, thereby unavoidably generating Rayleigh scattering noise that limits the distance and bit rate. Here, we introduce a novel dual-band sta…
Quantum key distribution (QKD) allows two distant parties to share encryption keys with security based on physical laws. Experimentally, it has been implemented with optical means, achieving key rates of 1.26 Megabit/s over 50 kilometres (km) of standard optical fibre and 1.16 bit/hour over 404 km of ultralow-loss fibre in a measurement-device-independent configuration. Increasing the bit rate and range of QKD is a formidable, but important, challenge. A related target, currently considered unfeasible without quantum repeaters, is overcoming the fundamental rate-distance limit of point-to-poin…
One of the main problems in quantum communications is how to achieve high rates at long distances. Quantum repeaters, i.e., untrusted, intermediate relay stations, are necessary to overcome the repeaterless bound which sets the fundamental rate-distance limit of repeaterless communications. In this work, we introduce a continuous-variable protocol which overcomes the repeaterless bound and scales like the single-repeater bound using just one linear-optical device called a "quantum scissor", combining the entanglement distillation and entanglement swapping elements of previous repeater proposal…
Quantum repeaters are indispensable tools for long-distance quantum communication. However, frequency matching between entangled photon sources and remote quantum memories (QMs) is difficult, which is an obstacle to the implementation of quantum repeaters. In this paper, we demonstrate a method to achieve the coupling of a Pr:YSO as a fixed-time QM with a single telecommunication-wavelength photon through frequency stabilization using an optical frequency comb over all applied laser wavelengths. The demonstrated method can lead to the implementation of a quantum repeater scheme enabling an imp…
The distribution of quantum states over long distances is limited by photon loss. Straightforward amplification as in classical telecommunications is not an option in quantum communication because of the no-cloning theorem. This problem could be overcome by implementing quantum repeater protocols, which create long-distance entanglement from shorter-distance entanglement via entanglement swapping. Such protocols require the capacity to create entanglement in a heralded fashion, to store it in quantum memories, and to swap it. One attractive general strategy for realizing quantum repeaters is b…
Quantum repeaters promise to deliver long-distance entanglement overcoming noise and loss in realistic quantum channels. A promising class of repeaters, based on atomic ensemble quantum memories and linear optics, follow the proposal by Duan et al [Nature 414, 413, 2001]. Here we analyse this protocol in terms of a very general model for the quantum memories employed. We derive analytical expressions for scaling of entanglement with memory imperfections, dark counts, loss and distance, and apply our results to two specific quantum memory protocols. Our methods apply to any quantum memory with …
We present a physical- and link-level design for the creation of entangled pairs to be used in quantum repeater applications where one can control the noise level of the initially distributed pairs. The system can tune dynamically, trading initial fidelity for success probability, from high fidelity pairs (F=0.98 or above) to moderate fidelity pairs. The same physical resources that create the long-distance entanglement are used to implement the local gates required for entanglement purification and swapping, creating a homogeneous repeater architecture. Optimizing the noise properties of the …
Quantum repeaters hold the promise to prevent the photon losses in communication channels. Most recently, the serious efforts have been applied to achieve scalable distribution of entanglement over long distances. However, the probabilistic nature of entanglement generation and realistic quantum memory storage times make the implementation of quantum repeaters an outstanding experimental challenge. We propose a quantum repeater protocol based on the deterministic storage of a single photon in atomic ensembles confined in distant high-finesse cavities and show that this system is capable of dis…
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multi-photon states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for…
We propose an efficient quantum repeater architecture with mesoscopic atomic ensembles, where the Rydberg blockade is employed for deterministic local entanglement generation, entanglement swapping and entanglement purification. Compared with conventional atomic-ensemble-based quantum repeater, the entanglement distribution rate is improved by up to two orders of magnitude with the help of the deterministic Rydberg gate. This new quantum repeater scheme is robust and fast, and thus opens up a new way for practical long-distance quantum communication.
Quantum repeaters, which are indispensable for long-distance quantum communication, are necessary for extending the entanglement from short distance to long distance; however, high-rate entanglement distribution, even between adjacent repeater nodes, has not been realized. In a recent work by C. Jones, et al., New J. Phys. 18, 083015 (2016), the entanglement distribution rate between adjacent repeater nodes was calculated for a plurality of quantum dots, nitrogen-vacancy centers in diamond, and trapped ions adopted as quantum memories inside the repeater nodes. Considering practical use, arran…
Entangled coherent states can be prepared remotely by subtracting non-locally a single photon from two quantum superpositions of coherent states, the so-called "Schroedinger's cat" state. Such entanglement can further be distributed over longer distances by successive entanglement swapping operations using linear optics and photon-number resolving detectors. The aim of this paper is to evaluate the performance of this approach to quantum repeaters for long distance quantum communications. Despite many attractive features at first sight, we show that, when using state-of-the-art photon counters…
We present a detailed analysis of a new robust quantum repeater architecture building on the original DLCZ protocol [L.M. Duan \textit{et al.}, Nature (London) \textbf{414}, 413 (2001)]. The new architecture is based on two-photon Hong-Ou-Mandel-type interference which relaxes the long-distance interferometric stability requirements by about 7 orders of magnitude, from sub-wavelength for the single photon interference required by DLCZ to the coherence length of the photons, thereby removing the weakest point in the DLCZ schema. Our proposal provides an exciting possibility for robust and reali…
Conventional wisdom suggests that realistic quantum repeaters will require quasi-deterministic sources of entangled photon pairs. In contrast, we here study a quantum repeater architecture that uses simple parametric down-conversion sources, as well as frequency-multiplexed multimode quantum memories and photon-number resolving detectors. We show that this approach can significantly extend quantum communication distances compared to direct transmission. This shows that important trade-offs are possible between the different components of quantum repeater architectures.
Quantum repeaters are used to overcome the exponential photon loss scaling that quantum states acquire as they are transmitted over long distances. While repeaters for discrete variable encodings of quantum information have existed for some time, novel approaches for continuous variable encoding quantum repeaters have only recently been proposed. In this work, we present a method of using a discrete variable repeater protocol to distribute continuous variable states and utilize it to compare the rates of continuous variable entanglement distribution between first generation continuous and disc…
Quantum communication enables a host of applications that cannot be achieved by classical communication means, with provably secure communication as one of the prime examples. The distance that quantum communication schemes can cover via direct communication is fundamentally limited by losses on the communication channel. By means of quantum repeaters, the reach of these schemes can be extended and chains of quantum repeaters could in principle cover arbitrarily long distances. In this work, we provide two efficient algorithms for determining the generation time and fidelity of the first gener…
Long-distance quantum communication via entanglement distribution is of great importance for the quantum internet. However, scaling up to such long distances has proved challenging due to the loss of photons, which grows exponentially with the distance covered. Quantum repeaters could in theory be used to extend the distances over which entanglement can be distributed, but in practice hardware quality is still lacking. Furthermore, it is generally not clear how an improvement in a certain repeater parameter, such as memory quality or attempt rate, impacts the overall network performance, rende…
We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interacti…
We present a quantum repeater scheme based on the recently proposed qubit amplifier [N. Gisin, S. Pironio and N. Sangouard, Phys. Rev. Lett. 105, 070501 (2010)]. It relies on a on-demand entangled-photon pair source which uses on-demand single-photon sources, linear optical elements and atomic ensembles. Interestingly, the imperfections affecting the states created from this source, caused e.g. by detectors with non-unit efficiencies, are systematically purified from an entanglement swapping operation based on a two-photon detection. This allows the distribution of entanglement over very long …
Quantum repeaters provide an efficient solution to distribute Bell pairs over arbitrarily long distances. While scalable architectures are demanding regarding the number of qubits that need to be controlled, here we present a quantum repeater scheme aiming to extend the range of present day quantum communications that could be implemented in the near future with trapped ions in cavities. We focus on an architecture where ion-photon entangled states are created locally and subsequently processed with linear optics to create elementary links of ion-ion entangled states. These links are then used…
The construction of large-scale quantum networks relies on the development of practical quantum repeaters. Many approaches have been proposed with the goal of outperforming the direct transmission of photons, but most of them are inefficient or difficult to implement with current technology. Here, we present a protocol that uses a semi-hierarchical structure to improve the entanglement distribution rate while reducing the requirement of memory time to a range of tens of milliseconds. This protocol can be implemented with a fixed distance of elementary links and fixed requirements on quantum me…
