We calculate the Casimir force between slabs of finite thickness made of intrinsic and doped silicon with different concentration of carriers and compare the results to those obtained for gold slabs. We use the Drude and the plasma models to describe the dielectric function for the carriers in doped Si. We discuss the possibility of experimentally testing the appropriateness of these models. We also investigate the influence of finite thickness on $VO_2$, which has recently been proposed for Casimir effect measurements testing the metal-insulator transition.
We analyse the potential of the geometry of a slab in a planar cavity for the purpose of Casimir force experiments. The force and its dependence on temperature, material properties and finite slab thickness are investigated both analytically and numerically for slab and walls made of aluminium and teflon FEP respectively. We conclude that such a setup is ideal for measurements of the temperature dependence of the Casimir force. By numerical calculation it is shown that temperature effects are dramatically larger for dielectrics, suggesting that a dielectric such as teflon FEP whose properties …
Emphasizing first the utility of the generalized Fresnel coefficients in the theory of the Casimir effect in planar cavities, we complement our previous discussion of the ordinary Casimir force on and the Casimir stress in a metal (plasma) slab in a planar cavity. We demonstrate strong dependence of the Casimir stress in a thin slab on properties of the bounding medium in the symmetric Lifshitz configuration. Contrary to this, the stress in a thick slab gradually becomes insensitive on external boundary conditions. We also consider the position dependence of the Casimir force on and stress in …
We study the field theoretical model of a scalar field in presence of spacial inhomogeneities in form of one and two finite width mirrors (material slabs). The interaction of the scalar field with the defect is described with position-dependent mass term. For the single layer system we develop a rigorous calculation method and derive explicitly the propagator of the theory, S-matrix elements and the Casimir self-energy of the slab. Detailed investigation of particular limits of self-energy is presented, and connection to know cases is discussed. The calculation method is found applicable to th…
In a recent letter, Martin and Zagrebnov [Europhys. Lett., 73 (2006) 1] discussed the thermodynamic Casimir effect for the ideal Bose gas confined in a thin film. We point out that their findings can be expressed in terms of previous general results for the Casimir effect induced by confined critical fluctuations. This highlights the links between the Casimir effect in the contexts of critical phenomena and Bose-Einstein condensation.
We consider the Casimir effect of a massive vector field between two semi-infinite dielectric slabs. We first derive the generalization of the Lifshitz formula that gives the Casimir interaction energy of two magnetodielectric slabs separated by a magnetodielectric medium due to the vacuum fluctuations of a massive vector field. We then discuss the asymptotic behaviors of the Casimir energy and the Casimir force in various limits, such as low temperature, high temperature, small mass, large mass, up to the first order in the finite conductivity correction, for two real metal semispaces whose d…
We present an explicit analytic calculation of the energy-level shift of an atom in front of a non-dispersive and non-dissipative dielectric slab. We work with the fully quantized electromagnetic field, taking retardation into account. We give the shift as a two-dimensional integral and use asymptotic analysis to find expressions for it in various retarded and non-retarded limiting cases. The results can be used to estimate the energy shift of an atom close to layered microstructures.
We consider the vacuum-field pressure on boundaries of a metal slab in the middle of a cavity with perfectly reflecting mirrors adopting the plasma model for the metal and paying special attention to the surface plasmon polariton contribution to the pressure. We demonstrate that, with increasing cavity length, the pressure on a thin (d<<λ_P) slab in this system decreases from the Casimir pressure F_C at zero slab-mirror distances to the non-retarded force per unit area F_nr=1.19 (d/λ_P)F_C in the case of an isolated slab. In the first case the pressure is entirely due to the photonic modes pro…
We discuss the Casimir effect between two identical, parallel slabs, emphasizing the role of dissipation and temperature. Starting from quite general assumptions, we analyze the behavior of the Casimir entropy in the limit T->0 and link it to the behavior of the slab's reflection coefficients at low frequencies. We also derive a formula in terms of a sum over modes, valid for dissipative slabs that can be interpreted in terms of a damped quantum oscillator.
We study quantum reflection of antihydrogen atoms from matter slabs due to the van der Waals/Casimir-Polder (vdW/CP) potential. By taking into account the specificities of antihydrogen and the optical properties and width of the slabs we calculate realistic estimates for the potential and quantum reflection amplitudes. Next we discuss the paradoxical result of larger reflection coefficients estimated for weaker potentials in terms of the Schwarzian derivative. We analyze the limiting case of reflections at small energies, which are characterized by a scattering length and have interesting appl…
We investigate repulsive Casimir force between slabs containing left-handed materials with controllable electromagnetic properties. The sign of Casimir force is determined by the electric and magnetic properties of the materials, and it is shown that the formation of the repulsive force is related to the wave impedances of two slabs. The sign change of the Casimir force as a function of the distance is studied. Special emphasis is put on the restoring Casimir force which may be found to exist between perfectly conducting material and metamaterial slabs. This restoring force is a natural power …
The Casimir-Lifshitz force is calculated between two inhomogeneous composite slabs, each made of a homogeneous matrix with spherical metallic inclusions. The effective dielectric function of the slabs is calculated using several effective medium approximations and we compare the resulting forces as a function of slab separation and filling fraction. We show that the choice of effective medium approximation is critical in making precise comparisons between theory and experiment. The role that the spectral representation of the effective medium plays in making a Wick rotation to the complex freq…
We investigate the error made by the pairwise summation (PWS) approximation in three geometries where the exact formula for the Casimir interaction is known: atom-slab, slab-slab and sphere-slab configurations. For each case the interactions are calculated analytically by summing the van der Waals interactions between the two objects. We show that the PWS result is incorrect even for an infinitely thin slab in the atom-slab configuration, because of local field effects, unless the material is infinitely dilute. In the experimentally relevant case of dielectric materials, in all considered geom…
We use the extended Lifshitz theory to study the behaviors of the Casimir forces between finite-thickness effective medium slabs. We first study the interaction between a semi-infinite Drude metal and a finite-thickness magnetic slab with or without substrate. For no substrate, the large distance $d$ dependence of the force is repulsive and goes as $1/d^5$; for the Drude metal substrate, a stable equilibrium point appears at an intermediate distance which can be tuned by the thickness of the slab. We then study the interaction between two identical chiral metamaterial slabs with and without su…
We derive an expression for the Casimir force between slabs with arbitrary dielectric properties characterized by their reflection coefficients. The formalism presented here is applicable to media with a local or a non-local dielectric response, an infinite or a finite width, inhomogeneous dissipative, etc. Our results reduce to the Lifshitz formula for the force between semi-infinite dielectric slabs by replacing the reflection coefficients by the Fresnel amplitudes.
Boyer showed that a perfect electrically conducting slab repels a perfect magnetically conducting slab, in contrast to the attractive Casimir force between two identical perfect electrically/magnetically conducting slabs. To gain insight for the difference between the Boyer force and the Casimir force, we present the derivation of the Boyer force using the stress tensor method and then using the method of variation in dielectric. The Green dyadic, in terms of electric and magnetic Green's functions, is presented for an electric medium filling half of space and another magnetic medium filling a…
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations wh…
In this paper we review the role of magneto plasmon polaritons in the Casimir force calculations. By applying an external constant magnetic field a strong optical anisotropy is induced on two parallel slabs reducing the reflectivity and thus the Casimir force. As the external magnetic field increases, the Casimir force decreases. Thus, with an an external magnetic field the Casimir force can be controlled.The calculations are done in the Voigt configuration where the magnetic field is parallel to the slabs. In this configuration the reflection coefficients for TE and TM modes do not show mode …
We study the radiative heat transfer and the Casimir-Lifshitz force occurring between two bodies in a system out of thermal equilibrium. We consider bodies of arbitrary shape and dielectric properties, held at two different temperatures, and immersed in a environmental radiation at a third different temperature. We derive explicit closed-form analytic expressions for the correlations of the electromagnetic field, and for the heat transfer and Casimir-Lifshitz force, in terms of the bodies scattering matrices. We then consider some particular cases which we investigate in detail: the atom-surfa…
Based on the theory of macroscopic quantum electrodynamics, we generalize the expression of the Casimir force for nonreciprocal media. The essential ingredient of this result is the Green's tensor between two nonreciprocal semi-infinite slabs including a reflexion matrix with four coefficients that mixes optical polarizations. This Green's tensor does not obey Lorentz's reciprocity and thus violates time-reversal symmetry. The general result for the Casimir force is analyzed in the retarded and nonretarded limits, concentrating on the influences arising from reflections with or without change …
We study the behavior of the critical Casimir force and its interplay with the van der Waals force acting between two parallel slabs separated at a distance $L$ from each other confining a non-polar simple fluid or a binary liquid mixture. The surfaces of the slabs are coated by thin layers exerting strong preference to the liquid phase of the fluid, or one of the components of the mixture. The slabs influence the fluid by long-range competing dispersion potentials. Under such conditions one usually expects {\it attractive} Casimir force governed by universal scaling function to which the disp…
In this study, we have derived close form of the Casimir force for the non-interacting ideal Bose gas between two slabs in harmonic-optical lattice potential by using Ketterle and van Druten approximation. We find that Bose-Einstein condensation temperature $T_{c}$ is a critical point for different physical behavior of the Casimir force. We have shown that Casimir force of confined Bose gas in the presence of the harmonic-optical potential decays with inversely proportional to $d^{5}$ when $T\leq T_{c}$. However, in the case of $T>T_{c}$, it decays exponentially depends on separation $d$ of th…
The local Casimir energy density for a massless scalar field associated with step-function potentials in a 3+1 dimensional spherical geometry is considered. The potential is chosen to be zero except in a shell of thickness $δ$, where it has height $h$, with the constraint $hδ=1$. In the limit of zero thickness, an ideal $δ$-function shell is recovered. The behavior of the energy density as the surface of the shell is approached is studied in both the strong and weak coupling regimes. The former case corresponds to the well-known Dirichlet shell limit. New results, which shed light on the natur…
The Casimir-Lifshitz torque between two biaxially polarizable anisotropic planar slabs is shown to exhibit a non-trivial sign-reversal in its rotational sense. The critical distance $a_c$ between the slabs that marks this reversal is characterized by the frequency $ω_c\!\sim \!c/2a_c$ at which the in-planar polarizabilities along the two principal axes are equal. The two materials seek to align their principal axes of polarizabilities in one direction below $a_c$, while above $a_c$ their axes try to align rotated perpendicular relative to their previous minimum energy orientation. The sign-rev…
We study the Casimir-Lifshitz force and the radiative heat transfer in a system consisting of three bodies held at three independent temperatures and immersed in a thermal environment, the whole system being in a stationary configuration out of thermal equilibrium. The theory we develop is valid for arbitrary bodies, i.e. for any set of temperatures, dielectric and geometrical properties, and describes each body by means of its scattering operators. For the three-body system we provide a closed-form unified expression of the radiative heat transfer and of the Casimir-Lifshitz force (both in an…
We present theoretical calculations of the Casimir force for Au thin films near the insulator-conductor transition that has been observed experimentally. The dielectric function of the Au thin films is described by the Drude-Smith model. The parameters needed to model the dielectric function such as the relaxation time, plasma frequency and the backscattering constant depend on the thickness of the film. The Casimir force decreases as the film thickness decreases until it reaches a minimum after which the force increases again. The minimum of the force coincides with the critical film thicknes…
We develop a microscopic toy model for Cavity dynamical Casimir effect (DCE), namely, the photon generation from vacuum due to a nonstationary dielectric slab in a fixed single mode cavity. We represent the slab by $N\gg 1$ noninteracting two-level atoms coupled to the field via the standard dipole interaction. We show that the DCE is contained implicitly in the light-matter interaction Hamiltonian when its parameters are externally prescribed functions of time. We also predict several new phenomena, such as saturation of the photon growth due to effective Kerr nonlinearity, generation of pair…
We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clusters) of compact objects, which we illustrate via a "molecular" two-sphere dicluster geometry consiting of two bound spheres levitated above a gold slab. Our calculations also reveal a strong interplay…
We carry out a realistic, yet simple, calculation of the Casimir-Polder interaction in the presence of a metallic shield in order to aid the design of experiments to test non-Newtonian gravity. In particular, we consider a rubidium atom near a movable silicon slab with a gold film in between. We show that by moving the slab to various distances and making precise measurements of the force exerted on the atom, one could in principle discern the existence of short-range modifications to Newtonian gravity. This avoids the need for a patterned surface where calculations are much harder and for whi…
In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-characterized by the Proximity Force Approximation (PFA), we find that in the present case the microstructure modulates the force in a way qualitatively inconsistent with PFA. We find instead that effective-me…
We study the Casimir-Lifshitz force and the radiative heat transfer occurring between two arbitrary bodies, each one held at a given temperature, surrounded by environmental radiation at a third temperature. The system, in stationary configuration out of thermal equilibrium, is characterized by a force and a heat transfer depending on the three temperatures, and explicitly expressed in terms of the scattering operators of each body. We find a closed-form analytic expression valid for bodies of any geometry and dielectric properties. As an example, the force between two parallel slabs of finite…
We discuss some implications of a very recently obtained result for the force on a slab in a planar cavity based on the calculation of the vacuum Lorentz force [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)]. We demonstrate that, according to this formula, the total force on the slab consists of a medium-screened Casimir force and, in addition to it, a medium-assisted force. The sign of of the medium-assisted force is determined solely by the properties of the cavity mirrors. In the Lifshitz configuration, this force is proportional to 1/d at small distances and is very small compa…
In this work we analyze the incidence of the plates' thickness on the Casimir force and radiative heat transfer for a configuration of parallel plates in a non-equilibrium scenario, relating to Lifshitz's and Landauer's formulas. From a first-principles canonical quantization scheme for the study of the matter-field interaction, we give closed-form expressions for the non-equilibrium Casimir force and the heat transfer between plates of thickness $d_{\rm L},d_{\rm R}$. We distinguish three different contributions to the Casimir force and to the heat transfer in the general non-equilibrium situ…
We have performed comparative measurements of the Casimir force between a metallic plate and a transparent sphere coated with metallic films of different thicknesses. We have observed that, if the thickness of the coating is less than the skin-depth of the electromagnetic modes that mostly contribute to the interaction, the force is significantly smaller than that measured with a thick bulk-like film. Our results provide the first direct evidence of the skin-depth effect on the Casimir force between metallic surfaces.
We demonstrate that a very recently obtained formula for the force on a slab in a material planar cavity based on the calculation of the vacuum Lorentz force [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] describes a (medium) screened Casimir force and, in addition to it, a medium-assisted force. The latter force also describes the force on the cavity medium. For dilute media, it implies the atom-mirror interaction of the Casimir-Polder type at large and of the Coulomb type at small atom-mirror distances of which the sign is insensitive to the polarizability type (electric or magn…
The Casimir force between two objects is notoriously difficult to calculate in anything other than parallel-plate geometries due to its non-additive nature. This means that for more complicated, realistic geometries one usually has to resort to approaches such as making the crude proximity force approximation (PFA). Another issue with calculation of Casimir forces in real-world situations (such as with realistic materials) is that there are continuing doubts about the status of the standard Lifshitz treatment as a true quantum theory. Here we demonstrate an alternative approach to calculation …
We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, suc…
We study the field theoretical model of a scalar field in presence of spacial inhomogeneities in form of one and two finite width mirrors (material slabs). The interaction of the scalar field with the defect is described with position-dependent mass term. Within this model we derive the interaction of two finite width mirrors, establish the correspondence of the model to the Lifshitz formula and construct limiting procedure to obtain finite self-energy of a single mirror without any normalization condition.
We argue that the results for the vacuum forces on a slab and on an atom embedded in a magnetodielectric medium near a mirror, obtained using a recently suggested Lorentz-force approach to the Casimir effect, are equivalent to the corresponding results obtained in a traditional way. We also derive a general expression for the atom-atom force in a medium and extend a few classical results concerning this force in vacuum and dielectrics to magnetodielectric systems. This, for example, reveals that the (repulsive) interaction between atoms of different polarizability type is at small distances un…
The Casimir force due to {\it thermal} fluctuations (or pseudo-Casimir force) was previously calculated for the perfect Bose gas in the slab geometry for various boundary conditions. The Casimir pressure due to {\it quantum} fluctuations in a weakly-interacting dilute Bose-Einstein condensate (BEC) confined to a parallel plate geometry was recently calculated for Dirichlet boundary conditions. In this paper we calculate the Casimir energy and pressure due to quantum fluctuations in a zero-temperature homogeneous weakly-interacting dilute BEC confined to a parallel plate geometry with periodic …
We examine the Casimir free energy and pressure of magnetic metal films, which are free-standing in vacuum, sandwiched between two dielectric plates, and deposited on either nonmagnetic or magnetic metallic plates. All calculations are performed using both the Drude and plasma model approaches to the Lifshitz theory. According to our results, the Casimir free energies and pressures calculated using both theoretical approaches are significantly different in the magnitude and sign even for thin films of several tens of nanometers thickness. Thus, for the Ni film of 47\,nm thickness deposited on …
In this article we compute the Casimir force between two finite-width mirrors at finite temperature, working in a simplified model in 1+1 dimensions. The mirrors, considered as dissipative media, are modeled by a continuous set of harmonic oscillators which in turn are coupled to an external environment at thermal equilibrium. The calculation of the Casimir force is performed in the framework of the theory of quantum open systems. It is shown that the Casimir interaction has two different contributions: the usual radiation pressure from vacuum, which is obtained for ideal mirrors without dissi…
Using nonstandard recursion relations for Fresnel coefficients involving successive stacks of layers, we extend the Lifshitz formula to configurations with an inhomogeneous, n-layered, medium separating two planar objects. The force on each object is the sum of a Lifshitz like force and a force arising from the inhomogeneity of the medium. The theory correctly reproduces very recently obtained results for the Casimir force/energy in some simple systems of this kind. As a by product, we obtain a formula for the force on an (unspecified) stack of layers between two planar objects which generaliz…
A general theory of photon-mediated energy and momentum transfer in N-body planar systems out of thermal equilibrium is introduced. It is based on the combination of the scattering theory and the fluctuational-electrodynamics approach in many-body systems. By making a Landauer-like formulation of the heat transfer problem, explicit formulas for the energy transmission coefficients between two distinct slabs as well as the self-coupling coefficients are derived and expressed in terms of the reflection and transmission coefficients of the single bodies. We also show how to calculate local equili…
The Casimir free energy of peptide films on a silicon substrate: Impact of dielectric-to-metal transition in silicon and nanoparticles in peptide
Central Astronomical Observatory at Pulkovo of the Russian Academy of Sciences（俄罗斯科学院普尔科沃中央天文台）；Peter the Great Saint Petersburg Polytechnic University（彼得大帝圣彼得堡理工大学）
Recently the influence of dielectric and geometrical properties on the Casimir force between dispersing and absorbing multilayered plates in the zero-temperature limit has been studied within a 1D quantization scheme for the electromagnetic field in the presence of causal media [R. Esquivel-Sirvent, C. Villarreal, and G.H. Cocoletzi, Phys. Rev. Lett. 64, 052108 (2001)]. In the present paper a rigorous 3D analysis is given, which shows that for complex heterostructures the 1D theory only roughly reflects the dependence of the Casimir force on the plate separation in general. Further, an extensi…
We investigate the Casimir free energy of a metallic film either sandwiched between two dielectric plates or in vacuum. It is shown that even for a thin film of several tens of nanometer thickness the Casimir free energy and pressure calculated with the Lifshitz theory using the Drude model and the plasma model approaches take significantly different values and can be easily discriminated. According to our results, the classical limit is already achieved for films of about 100\,nm thickness if the Drude model approach is used in calculations. In this case the classical expressions for the Casi…
Weyl semimetals are a class of topological materials that exhibit a bulk Hall effect due to time-reversal symmetry breaking. We show that for the idealized semi-infinite case, the Casimir force between two identical Weyl semimetals is repulsive at short range and attractive at long range. Considering plates of finite thickness, we can reduce the size of the long-range attraction even making it repulsive for all distances when thin enough. In the thin-film limit, we study the appearance of an attractive Casimir force at shorter distances due to the longitudinal conductivity. Magnetic field, thi…
By using silicon oxide based aerogels we show numerically that the Casimir force can be reduced several orders of magnitude, making its effect negligible in nanodevices. This decrease in the Casimir force is also present even when the aerogels are deposited on metallic substrates. To calculate the Casimir force we model the dielectric function of silicon oxide aerogels using an effective medium dielectric function such as the Clausius-Mossotti approximation. The results show that both the porosity of the aerogel and its thickness can be use as control parameters to reduce the magnitude of the …
The Casimir effect in a dispersive and absorbing multilayered system is considered adopting the (net) vacuum-field pressure point of view to the Casimir force. Using the properties of the macroscopic field operators appropriate for absorbing systems and a convenient compact form of the Green function for a multilayer, a straightforward and transparent derivation of the Casimir force in a lossless layer of an otherwise absorbing multilayer is presented. The resulting expression in terms of the reflection coefficients of the surrounding stacks of layers is of the same form as that obtained by Zh…
he Casimir force is calculated between plates with thin metallic coating. Thin films are described with spatially dispersive (nonlocal) dielectric functions. For thin films the nonlocal effects are more relevant than for half-spaces. However, it is shown that even for film thickness smaller than the mean free path for electrons, the difference between local and nonlocal calculations of the Casimir force is of the order of a few tenths of a percent. Thus the local description of thin metallic films is adequate within the current experimental precision and range of separations.
We study the thermalization of an elementary quantum system modeled by a two-level atom interacting with stationary electromagnetic fields out of thermal equilibrium near a dielectric slab. The slab is held at a temperature different from that of the region where the atom is located. We find that when the slab is a nonabsorbing and nondispersive dielectric of a finite thickness $ d$, no out of thermal equilibrium effects appear as far as the thermalization of the atom is concerned, and a finite thick dielectric slab with a tiny imaginary part in the relative permittivity $\operatorname{Im} ε$ …
We discuss the role of the proximity force approximation in deriving limits to the existence of Yukawian forces - predicted in the submillimeter range by many unification models - from Casimir force experiments using the sphere-plane geometry. Two forms of this approximation are discussed, the first used in most analyses of the residuals from the Casimir force experiments performed so far, and the second recently discussed in this context in R. Decca et al. [Phys. Rev. D 79, 124021 (2009)]. We show that the former form of the proximity force approximation overestimates the expected Yukawa forc…
Monopolar charge disorder effects are studied in the context of fluctuation-induced interactions between neutral dielectric slabs. It is shown that quenched bulk charge disorder gives rise to an additive contribution to the net interaction force which decays as the inverse distance between the slabs and may thus completely mask the standard Casimir--van der Waals force at large separations. By contrast, annealed (bulk or surface) charge disorder leads to a net interaction force whose large-distance behavior coincides with the universal Casimir force between perfect conductors, which scales as …
We investigate the thermal Casimir force between two parallel plates made of different isotropic materials which are separated by a uniaxial anisotropic film. Numerical computations of the Casimir pressure at T=300K are performed using the complete Lifshitz formula adapted for an anisotropic intervening layer and in the nonrelativistic limit. It is shown that the standard (nonrelativistic) theory of the van der Waals force is not applicable in this case, because the effects of retardation contribute significantly even for film thicknesses of a few nanometers. We have also obtained simple analy…
Zero-frequency Casimir theory is analyzed from different viewpoints, focusing on the Drude-plasma issue that turns up when one considers thermal corrections to the Casimir force. The problem is that the plasma model, although leaving out dissipation in the material, apparently gives the best agreement with recent experiments. We consider a dielectric plate separated from a dielectric half-space by a vacuum gap, both media being similar. We consider the following categories: (1) Making use of the statistical mechanical method developed by Høye and Brevik (1998), implying that the quantized elec…
