When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: A novel "breathing" instability, originating from the edge of the filament, and a sinusoidal instability in the interior, which ultimately gives rise to a "blistering" pattern of beads on the filament. We describe the linear instability with a spatial resolution of 80 nm in the disturbance amplitude. For sufficiently high polymer concentrations, the filament eventually separates out into a "solid" phase of entangled polymers, connected by fluid beads. A solid polymer fiber of about 100 nanometer thickness remains, which is essentially permanent.
A fluid dynamics video of the break up of a droplet of saliva is shown. First a viscoelastic filament is formed and than the blistering of this filament is shown. Finally, a flow induced phase separation takes place nanometer sized solid fiber remains that consist out of the biopolymers.
We study both numerically and experimentally the breakup of a viscoelastic liquid bridge between two parallel electrodes. We solve the leaky-dielectric FENE-P model to describe the dynamical response of the liquid bridge under isothermal conditions. The results show that the surface charge screens the inner electric field perpendicular to the free surface over the entire dynamical process. The liquid bridge deformation produces a normal electric field on the outer side of the free surface that is commensurate with the axial one. The surface conduction does not significantly affect the current …
The formation of drops of a complex fluid, for instance including dissolved polymers and/or solid particles, has practical implications in several industrial and biophysical processes. In this Letter, we experimentally investigate the generation of drops of a viscoelastic suspension, made of non-Brownian spherical particles dispersed in a dilute polymer solution. Using high-speed imaging, we characterize the different stages of the detachment. Our experiments show that the particles primarily affect the initial Newtonian necking by increasing the fluid viscosity. In the viscoelastic regime, pa…
When a polymer solution is uniaxially stretched and held fixed at both ends, the solution quickly separates into droplets connected by strings and takes the beads-on-string structure. The string then becomes thinner by capillary forces. Here we develop a theoretical framework on viscoelastic fluids based on Onsager principle, and apply it to the dynamics of viscoelastic filaments. We show that the beads-on-string structure is a thermodynamic quasi-equilibrium state, and derive an equation for the coexistence condition in the pseudo-equilibrium state. Using the condition, we solve the evolution…
We revisit the problem of the two-dimensional spatiotemporal linear stability of viscoelastic slender jets obeying linear Phan-Thien-Tanner (PTT) stress constitutive equation, and investigate the role of finite stresses on the elasto-capilliary stability of the Beads-on-a-String (BOAS) structure (structures which include the formation of very thin filament between drops) and identify the regions of topological transition of the advancing jet interface, in the limit of low to moderate Ohnesorge number ($Oh$) and high values of Weissenberg number ($We$). The Briggs idea of analytic continuation …
A filament of liquid is usually unstable and breaks up into small droplets, while a filament of polymer solution is known to be quite stable against such instability, and they form a stable configuration of filament connecting two spherical droplets. If the droplets are fixed in space, the liquid flows from the filament region to the droplet region to reduce the surface energy and the filament gets thinner. If the whole liquid is placed in another viscous fluid, the droplets approach each other, and the filament can get thicker. Here we study the dynamics of such system. We derive time evoluti…
The formation and destabilisation of viscoelastic filaments are of importance in many industrial and biological processes. Filament instabilities have been observed for viscoelastic fluids but recently also for soft elastic solids. In this work, we address the central question how to connect the dynamical behavior of viscoelastic liquids to that of soft elastic solids. We take advantage of a biopolymer material whose viscoelastic properties can be tuned over a very large range by its pH, and study the destabilization and ensuing instabilities in uniaxial extensional deformation. In agreement w…
Many microorganisms swim through gels and non-Newtonian fluids in their natural environments. In this paper, we focus on microorganisms which use flagella for propulsion. We address how swimming velocities are affected in nonlinearly viscoelastic fluids by examining the problem of an infinitely long cylinder with arbitrary beating motion in the Oldroyd-B fluid. We solve for the swimming velocity in the limit in which deflections of the cylinder from its straight configuration are small relative to the radius of the cylinder and the wavelength of the deflections; furthermore, the radius of the …
Coherent structures in Newtonian and viscoelastic turbulent planar jets
Okinawa Institute of Science and Technology Graduate University（冲绳科学技术大学院大学）；Universidad Polit{é}cnica de Madrid（马德里理工大学）；Flow Matters Consultancy BV（Flow Matters咨询有限公司）
Simulations of undulatory swimming in viscoelastic fluids with large amplitude gaits show concentration of polymer elastic stress at the tips of the swimmers.We use a series of related theoretical investigations to probe the origin of these concentrated stresses. First the polymer stress is computed analytically at a given oscillating extensional stagnation point in a viscoelastic fluid. The analysis identifies a Deborah number (De) dependent Weissenberg number (Wi) transition below which the stress is linear in Wi, and above which the stress grows exponentially in Wi. Next, stress and velocit…
We report a technique based on Fresnel diffraction with white illumination that permits the resolution of capillary surface patterns of less than 100 nanometers. We investigate Rayleigh Plateaux like instability on a viscoelastic capillary bridge and show that we can overcome the resolution limit of optical microscopy. The viscoelastic filaments are approximately 20 microns thick at the end of the thinning process when the instability sets in. The wavy distortions grow exponentially in time and the pattern is resolved by an image treatment that is based on an approximation of the measured risi…
The effects of elasticity on filament thinning and breakup are investigated in microchannel cross flow. When a viscous solution is stretched by an external immiscible fluid, a low 100 ppm polymer concentration strongly affects the breakup process, compared to the Newtonian case. Qualitatively, polymeric filaments show much slower evolution, and their morphology features multiple connected drops. Measurements of filament thickness show two main temporal regimes: flow- and capillary-driven. At early times both polymeric and Newtonian fluids are flow-driven, and filament thinning is exponential. …
A number of commercial fluids, including synthetic automotive oils, food and consumer products containing polymer additives exhibit weakly rate-thickening responses in the final stages of capillarity-driven thinning, where a large accumulated strain and high extensional strain rate alter the thinning dynamics of the slender liquid filament. Consequently, the capillarity-driven thinning dynamics typically feature two distinct regions at the early and late stages of the filament breakup process, each dominated by distinct mechanisms. These features have been incorporated in a simple Inelastic Ra…
