This paper addresses the performance of bit-interleaved coded multiple beamforming (BICMB) [1], [2] with imperfect knowledge of beamforming vectors. Most studies for limited-rate channel state information at the transmitter (CSIT) assume that the precoding matrix has an invariance property under an arbitrary unitary transform. In BICMB, this property does not hold. On the other hand, the optimum precoder and detector for BICMB are invariant under a diagonal unitary transform. In order to design a limited-rate CSIT system for BICMB, we propose a new distortion measure optimum under this invariance. Based on this new distortion measure, we introduce a new set of centroids and employ the generalized Lloyd algorithm for codebook design. We provide simulation results demonstrating the performance improvement achieved with the proposed distortion measure and the codebook design for various receivers with linear detectors. We show that although these receivers have the same performance for perfect CSIT, their performance varies under imperfect CSIT.
Building on the recent coded-caching breakthrough by Maddah-Ali and Niesen, the work here considers the $K$-user cache-aided wireless multi-antenna (MISO) symmetric broadcast channel (BC) with random fading and imperfect feedback, and analyzes the throughput performance as a function of feedback statistics and cache size. In this setting, our work identifies the optimal cache-aided degrees-of-freedom (DoF) within a factor of 4, by identifying near-optimal schemes that exploit the new synergy between coded caching and delayed CSIT, as well as by exploiting the unexplored interplay between cachi…
A Non-Orthogonal Unicast and Multicast (NOUM) transmission system allows a multicast stream intended to all receivers to be jointly transmitted with unicast streams in the same time-frequency resource blocks. While the capacity of the two-user multi-antenna NOUM with perfect Channel State Information at the Transmitter (CSIT) is known and achieved by Dirty Paper Coding (DPC)-assisted NOUM with Superposition Coding (SC), the capacity and the capacity-achieving strategy of the multi-antenna NOUM with partial CSIT remain unknown. In this work, we focus on the partial CSIT setting and make two maj…
Reliable communication over delay-constrained block-fading channels with discrete inputs and mismatched (imperfect) channel state information at the transmitter (CSIT) is studied. The CSIT mismatch is modeled as Gaussian random variables, whose variances decay as a power of the signal-to-noise ratio (SNR). A special focus is placed on the large-SNR decay of the outage probability when power control with long-term power constraints is used. Without explicitly characterizing the corresponding power allocation algorithms, we derive the outage exponent as a function of the system parameters, inclu…
This work explores coded caching in the symmetric $K$-user cache-aided MISO BC with imperfect CSIT-type feedback, for the specific case where the cache size is much smaller than the library size. Building on the recently explored synergy between caching and delayed-CSIT, and building on the tradeoff between caching and CSIT quality, the work proposes new schemes that boost the impact of small caches, focusing on the case where the cumulative cache size is smaller than the library size. For this small-cache setting, based on the proposed near-optimal schemes, the work identifies the optimal cac…
This work investigates the interplay of coded caching and spatial multiplexing in an overloaded Multiple-Input-Single-Output (MISO) Broadcast Channel (BC), i.e. a system where the number of users is greater than the number of transmitting antennas. On one hand, coded caching uses the aggregate global cache memory of the users to create multicasting opportunities. On the other hand, multiple antennas at the transmitter leverage the available CSIT to transmit multiple streams simultaneously. In this paper, we introduce a novel scheme which combines both the gain derived from coded-caching and sp…
We study quantization of log-likelihood ratios (LLR) in bit-interleaved coded modulation (BICM) systems in terms of an equivalent discrete channel. We propose to design the quantizer such that the quantizer outputs become equiprobable. We investigate semi-analytically and numerically the ergodic and outage capacity over single- and multiple-antenna channels for different quantizers. Finally, we show bit error rate simulations for BICM systems with LLR quantization using a rate 1/2 low-density parity-check code.
Caire, Taricco and Biglieri presented a detailed analysis of bit interleaved coded modulation, a simple and popular technique used to improve system performance, especially in the context of fading channels. They derived an upper bound to the probability of error, called the expurgated bound. In this correspondence, the proof of the expurgated bound is shown to be flawed. A new upper bound is also derived. It is not known whether the original expurgated bound is valid for the important special case of square QAM with Gray labeling, but the new bound is very close to, and slightly tighter than,…
In this paper, we present the diversity order analysis of bit-interleaved coded multiple beamforming (BICMB) combined with the constellation precoding scheme. Multiple beamforming is realized by singular value decomposition of the channel matrix which is assumed to be perfectly known to the transmitter as well as the receiver. Previously, BICMB is known to have a diversity order bound related with the product of the code rate and the number of parallel subchannels, losing the full diversity order in some cases. In this paper, we show that BICMB combined with the constellation precoder and maxi…
In this paper, we consider the $K$-user cache-aided wireless MISO broadcast channel (BC) with random fading and delayed CSIT, and identify the optimal cache-aided degrees-of-freedom (DoF) performance within a factor of 4. The achieved performance is due to a scheme that combines basic coded-caching with MAT-type schemes, and which efficiently exploits the prospective-hindsight similarities between these two methods. This delivers a powerful synergy between coded caching and delayed feedback, in the sense that the total synergistic DoF-gain can be much larger than the sum of the individual gain…
Multiple beamforming is realized by singular value decomposition of the channel matrix which is assumed to be known to both the transmitter and the receiver. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve full diversity as long as the code rate Rc and the number of employed subchannels S satisfy the condition RcS<=1. Bit-Interleaved Coded Multiple Beamforming with Constellation Precoding (BICMB-CP), on the other hand, can achieve full diversity without the condition RcS<=1. However, the decoding complexity of BICMB-CP is much higher than BICMB. In this paper, a reduced complexi…
The wideband regime of bit-interleaved coded modulation (BICM) in Gaussian channels is studied. The Taylor expansion of the coded modulation capacity for generic signal constellations at low signal-to-noise ratio (SNR) is derived and used to determine the corresponding expansion for the BICM capacity. Simple formulas for the minimum energy per bit and the wideband slope are given. BICM is found to be suboptimal in the sense that its minimum energy per bit can be larger than the corresponding value for coded modulation schemes. The minimum energy per bit using standard Gray mapping on M-PAM or …
Delayed bit-interleaved coded modulation (DBICM) generalizes bit-interleaved coded modulation (BICM) by modulating differently delayed sub-blocks of codewords onto the same signals. DBICM improves transmission reliability over BICM due to its capability of detecting undelayed sub-blocks with the extrinsic information of the decoded delayed sub-blocks. In this work, we propose a novel windowed decoding algorithm for DBICM, which uses the extrinsic information of both the decoded delayed and undelayed sub-blocks, to improve the detection on all sub-blocks. Numerical results show that the propose…
This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square $M$-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols ar…
A new variant of bit interleaved coded modulation (BICM) is proposed. In the new scheme, called Parallel BICM, L identical binary codes are used in parallel using a mapper, a newly proposed finite-length interleaver and a binary dither signal. As opposed to previous approaches, the scheme does not rely on any assumptions of an ideal, infinite-length interleaver. Over a memoryless channel, the new scheme is proven to be equivalent to a binary memoryless channel. Therefore the scheme enables one to easily design coded modulation schemes using a simple binary code that was designed for that binar…
It is shown that while the mutual information curves for coded modulation (CM) and bit interleaved coded modulation (BICM) overlap in the case of a single input single output channel, the same is not true in multiple input multiple output (MIMO) channels. A method for mitigating fading in the presence of multiple transmit antennas, named coordinate interleaving (CI), is presented as a generalization of component interleaving for a single transmit antenna. The extent of any advantages of CI over BICM, relative to CM, is analyzed from a mutual information perspective; the analysis is based on an…
The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders,…
When the Channel State Information (CSI) is known by both the transmitter and the receiver, beamforming techniques employing Singular Value Decomposition (SVD) are commonly used in Multiple-Input Multiple-Output (MIMO) systems. Without channel coding, there is a trade-off between full diversity and full multiplexing. When channel coding is added, both of them can be achieved as long as the code rate Rc and the number of employed subchannels S satisfy the condition RcS<=1. By adding a properly designed constellation precoder, both full diversity and full multiplexing can be achieved for both un…
This letter investigates bit-interleaved coded multiple beamforming (BICMB) with perfect coding in millimeter-wave (mm-wave) massive multiple-input multiple-output (MIMO) systems to achieve both maximum diversity gain and multiplexing gain. Using perfect coding with BICMB enables us to do this. We show that by using BICMB and perfect coding, the diversity gain becomes independent from the number of transmitted data streams and the number of antennas in each remote antenna unit (RAU) at the transmitter and the receiver. The assumption is that the perfect channel state information (CSI) is known…
For broadband wireless communication systems, Orthogonal Frequency Division Multiplexing (OFDM) has been combined with Multi-Input Multi-Output (MIMO) techniques. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve both spatial diversity and spatial multiplexing for flat fading MIMO channels. For frequency selective fading MIMO channels, BICMB with OFDM (BICMB-OFDM) can be applied to achieve both spatial diversity and multipath diversity, making it an important technique. However, analyzing the diversity of BICMB-OFDM is a challenging problem. In this paper, the diversity analysis o…
In this paper, diversity analysis of bit-interleaved coded multiple beamforming (BICMB) is extended to the case of general spatial interleavers, removing a condition on their previously known design criteria and quantifying the resulting diversity order. The diversity order is determined by a parameter Qmax which is inherited from the convolutional code and the spatial de-multiplexer used in BICMB. We introduce a method to find this parameter by employing a transfer function approach as in finding the weight spectrum of a convolutional code. By using this method, several Qmax values are shown …
This paper investigates the design of spatially coupled low-density parity-check (SC-LDPC) codes constructed from connected-chain ensembles for bit-interleaved coded modulation (BICM) schemes. For short coupling lengths, connecting multiple SC-LDPC chains can improve decoding performance over single-chains and impose structured unequal error protection (UEP). A joint design of connected-chain ensembles and bit mapping to further exploit the UEP from codes and high-order modulations is proposed. Numerical results demonstrate the superiority of the proposed design over existing connected-chain e…
This paper develops a low-complexity near-optimal non-coherent receiver for a multi-level energy-based coded modulation system. Inspired by the turbo processing principle, we incorporate the fundamentals of bit-interleaved coded modulation with iterative decoding (BICM-ID) into the proposed receiver design. The resulting system is called bit-interleaved coded energy-based modulation with iterative decoding (BICEM-ID) and its error performance is analytically studied. Specifically, we derive upper bounds on the average pairwise error probability (PEP) of the non-coherent BICEM-ID system in the …
We revisit the information-theoretic analysis of bit-interleaved coded modulation (BICM) by modeling the BICM decoder as a mismatched decoder. The mismatched decoding model is well-defined for finite, yet arbitrary, block lengths, and naturally captures the channel memory among the bits belonging to the same symbol. We give two independent proofs of the achievability of the BICM capacity calculated by Caire et al. where BICM was modeled as a set of independent parallel binary-input channels whose output is the bitwise log-likelihood ratio. Our first achievability proof uses typical sequences, …
Bit-interleaved coded modulation (BICM) has attracted considerable attention from the research community in the past three decades, because it can achieve desirable error performance with relatively low implementation complexity for a large number of communication and storage systems. By exploiting the iterative demapping and decoding (ID), the BICM is able to approach capacity limits of coded modulation over various channels. In recent years, protograph low-density parity-check (PLDPC) codes and their spatially-coupled (SC) variants have emerged to be a pragmatic forward-error-correction (FEC…
An energy-efficient approach is presented for shaping a bit-interleaved low-density parity-check (LDPC) coded amplitude phase-shift keying (APSK) system. A subset of the interleaved bits output by a binary LDPC encoder are passed through a nonlinear shaping encoder whose output is more likely to be a zero than a one. The "shaping" bits are used to select from among a plurality of subconstellations, while the unshaped bits are used to select the symbol within the subconstellation. Because the shaping bits are biased, symbols from lower-energy subconstellations are selected more frequently than …
The capacity of the AWGN broadcast channel is achieved by superposition coding, but superposition of individual coded modulations expands the modulation alphabet and distorts its configuration. Coded modulation over a broadcast channel subject to a specific channel-input modulation constraint remains an important open problem. Some progress has been made in the related area of unequal-error protection modulations which can be considered single-user broadcast transmission, but it does not approach all points on the boundary of the capacity region. This paper studies broadcast coded modulation u…
In this paper we carry out the asymptotic diversity analysis for millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems by using bit interleaved coded multiple beamforming (BICMB). First, a single-user mmWave system which employs $M_t$ antenna subarrays at the transmitter and $M_r$ antenna subarrays at the receiver is studied. Each antenna subarray in the transmitter and the receiver has $N_r$ and $N_t$ antennas, respectively. We establish a theorem for the diversity gain when the number of antennas in each remote antenna unit (RAU) goes to infinity. Based on the theore…
Multi-Input Multi-Output (MIMO) techniques have been incorporated with Orthogonal Frequency Division Multiplexing (OFDM) for broadband wireless communication systems. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve both spatial diversity and spatial multiplexing for flat fading MIMO channels. For frequency selective fading MIMO channels, BICMB with OFDM (BICMB-OFDM) can be employed to provide both spatial diversity and multipath diversity, making it an important technique. In our previous work, the subcarrier grouping technique was applied to combat the negative effect of subcar…
An analysis of the diversity gain for bit-interleaved coded multiple beamforming (BICMB) method in millimeter-wave (mm-Wave) massive multiple-input multiple-output (MIMO) systems is carried out for both the single-user and multi-user scenario. We show that the diversity gain is independent of the number of data streams and full spatial multiplexing order can be achieved in both scenarios. Also, we show that the diversity gain in the multi-user scenario is independent of the number of users in the system and only depends on the number of the remote antenna units (RAUs) at the transmitter side, …
$2^m$-ary modulation creates $m$ bit channels which are neither independent nor identical, and this causes problems when applying polar coding because polar codes are designed for independent identical channels. Different from the existing multi-level coding (MLC) and bit-interleaved coded modulation (BICM) schemes, this paper provides a convolutional polar coded modulation (CPCM) method that preserves the low-complexity nature of BICM while offering improved spectral efficiency. Numerical results are given to show the good performance of the proposed method.
Perfect Space-Time Block Codes (PSTBCs) achieve full diversity, full rate, nonvanishing constant minimum determinant, uniform average transmitted energy per antenna, and good shaping. However, the high decoding complexity is a critical issue for practice. When the Channel State Information (CSI) is available at both the transmitter and the receiver, Singular Value Decomposition (SVD) is commonly applied for a Multiple-Input Multiple-Output (MIMO) system to enhance the throughput or the performance. In this paper, two novel techniques, Perfect Coded Multiple Beamforming (PCMB) and Bit-Interleav…
Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of the multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of the multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this c…
Two decoder structures for coded modulation over the Gaussian and flat fading channels are studied: the maximum likelihood symbol-wise decoder, and the (suboptimal) bit-wise decoder based on the bit-interleaved coded modulation paradigm. We consider a 16-ary quadrature amplitude constellation labeled by a Gray labeling. It is shown that the asymptotic loss in terms of pairwise error probability, for any two codewords caused by the bit-wise decoder, is bounded by 1.25 dB. The analysis also shows that for the Gaussian channel the asymptotic loss is zero for a wide range of linear codes, includin…
The performance of bit-interleaved coded modulation (BICM) with bit shaping (i.e., non-equiprobable bit probabilities in the underlying binary code) is studied. For the Gaussian channel, the rates achievable with BICM and bit shaping are practically identical to those of coded modulation or multilevel coding. This identity holds for the whole range of values of signal-to-noise ratio. Moreover, the random coding error exponent of BICM significantly exceeds that of multilevel coding and is very close to that of coded modulation.
Although BICM can significantly improves the BER performance by iteration processing between the demapping and the decoding in a traditional receiver, its design and performance in PNC system has fewer studied. This paper investigates a bit interleaved coded modulation (BICM) scheme in a Gaussian two-way relay channel operated with physical layer network coding (PNC). In particular, we first present an iterative demapping and decoding framework specially designed for PNC. After that, we compare different constellation mapping schemes in this framework, with the convergence analysis by using th…
Multilevel coding (MLC) is a coded modulation technique which can achieve excellent performance over a range of communication channels. Polar codes have been shown to be quite compatible with communication systems using MLC, as the rate allocation of the component polar codes follows the natural polarization inherent in polar codes. MLC based techniques have not yet been studied in systems that use spatial modulation (SM). SM makes the polar code design difficult as the spatial bits actually select a channel index for transmission. To solve this problem, we propose a Monte Carlo based evaluati…
Bit-interleaved coded modulation (BICM) and multilevel coded modulation (MLC) are commonly used to combine polar codes with high order modulation. While BICM benefits from simple design and the separation of coding and modulation, MLC shows better performance under successive-cancellation decoding. In this paper we propose a hybrid polar coded modulation scheme that lies between BICM and MLC, wherein a fraction of bits are assigned to set-partition (SP) labeling and the remaining bits are assigned for Gray labeling. The SP labeled bits undergo sequential demodulation, using iterative demodulat…
We consider the problem of using polar codes with higher order modulation over AWGN channels. Unlike prior work, we focus on using modulation independent polar codes. That is, the polar codes are not re-designed based on the modulation used. Instead, we propose bit-permuted coded modulation (BPCM): a technique for using the multilevel coding (MLC) approach for an arbitrary polar code. The BPCM technique exploits a natural connection between MLC and polar codes. It involves applying bit permutations prior to mapping the polar code to a higher order modulation. The bit permutations are designed,…
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels are constructed and used for code design. The constructed codes perform as good as multi-edge type codes of Zhang and Kschischang (2013). For 64-ASK with probabilistic shaping, a blocklength 64800 code…
This paper investigates the bit-interleaved coded generalized spatial modulation (BICGSM) with iterative decoding (BICGSM-ID) for multiple-input multiple-output (MIMO) visible light communications (VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain (SiD) symbols and the spatial-domain (SpD) light emitting diode (LED)-index patterns are coded by a protograph low-density parity-check (P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating (SSER) method for constructing a type of novel generalized spatial modulation (GSM) constella…
The polar codes are proven to be capacity-achieving and are shown to have equivalent or even better finite-length performance than the turbo/LDPC codes under some improved decoding algorithms over the additive white Gaussian noise (AWGN) channels. Polar coding is based on the so-called channel polarization phenomenon induced by a transform over the underlying binary-input channel. The channel polarization is found to be universal in many signal processing problems and has been applied to the coded modulation schemes. In this paper, the channel polarization is further extended to the multiple a…
In this paper, the impact of Forward Error Correction (FEC) code namely Trellis code with interleaver on the performance of wavelet based MC-CDMA wireless communication system with the implementation of Alamouti antenna diversity scheme has been investigated in terms of Bit Error Rate (BER) as a function of Signal-to-Noise Ratio (SNR) per bit. Simulation of the system under proposed study has been done in M-ary modulation schemes (MPSK, MQAM and DPSK) over AWGN and Rayleigh fading channel incorporating Walsh Hadamard code as orthogonal spreading code to discriminate the message signal for indi…
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels for the code design are used. The constructed codes for uniform inputs perform as good as the multi-edge type codes of Zhang and Kschischang (2013). For 8-ASK and 64-ASK with probabilistic shaping, cod…
We analyze the achievable information rates (AIRs) for coded modulation schemes with QAM constellations with both bit-wise and symbol-wise decoders, corresponding to the case where a binary code is used in combination with a higher-order modulation using the bit-interleaved coded modulation (BICM) paradigm and to the case where a nonbinary code over a field matched to the constellation size is used, respectively. In particular, we consider hard decision decoding, which is the preferable option for fiber-optic communication systems where decoding complexity is a concern. Recently, Liga \emph{et…
Bit-interleaved coded modulation (BICM) using (bi-)orthogonal signals is especially well suited for the application in impulse-radio ultra-wideband transmission systems, which typically operate in the power-limited regime and require a very low-complexity transmitter and receiver design. In this paper we analyze the capacity of BICM using (bi-)orthogonal signals with coherent and noncoherent detection and put particular focus on the power-limited or wideband regime. We give analytical expressions for the ratio energy per bit vs. noise power spectral density in the limit of infinite bandwidth a…
Sparse code multiple access (SCMA) is a class of non-orthogonal multiple access (NOMA) that is proposed to support uplink machine-type communication services. In an SCMA system, designing multidimensional constellation plays an important role in the performance of the system. Since the behaviour of multidimensional constellations highly depends on the type of the channel, it is crucial to employ a constellation that is suitable for a certain application. In this paper, we first highlight and review the key performance indicators (KPIs) of multidimensional constellations that should be consider…
A scheme is proposed that combines probabilistic signal shaping with bit-metric decoding. The transmitter generates symbols according to a distribution on the channel input alphabet. The symbols are labeled by bit strings. At the receiver, the channel output is decoded with respect to a bit-metric. An achievable rate is derived using random coding arguments. For the 8-ASK AWGN channel, numerical results show that at a spectral efficiency of 2 bits/s/Hz, the new scheme outperforms bit-interleaved coded modulation (BICM) without shaping and BICM with bit shaping (i Fabregas and Martinez, 2010) b…
Beamforming techniques that employ Singular Value Decomposition (SVD) are commonly used in Multi-Input Multi-Output (MIMO) wireless communication systems. In the absence of channel coding, when a single symbol is transmitted, these systems achieve the full diversity order provided by the channel; whereas when multiple symbols are simultaneously transmitted, this property is lost. When channel coding is employed, full diversity order can be achieved. For example, when Bit-Interleaved Coded Modulation (BICM) is combined with this technique, full diversity order of NM in an MxN MIMO channel trans…
Fourier-Curve Constellations under Tangential Perturbation: Covariance-Aware Soft Demapping on Coded Links
RPTU University Kaiserslautern-Landau（凯泽斯劳滕-兰道技术大学）；Beijing Huairou Laboratory（北京怀柔实验室）；Princeton University（普林斯顿大学）；German Research Center for Artificial Intelligence (DFKI)（德国人工智能研究中心）
Bit-interleaved coded modulation (BICM) transceivers often use equally spaced constellations and a random interleaver. In this paper, we propose a new BICM design, which considers hierarchical (nonequally spaced) constellations, a bit-level multiplexer, and multiple interleavers. It is shown that this new scheme increases the degrees of freedom that can be exploited in order to improve its performance. Analytical bounds on the bit error rate (BER) of the system in terms of the constellation parameters and the multiplexing rules are developed for the additive white Gaussian Noise (AWGN) and Nak…
Soft forward error correction with higher-order modulations is often implemented in practice via the pragmatic bit-interleaved coded modulation paradigm, where a single binary code is mapped to a nonbinary modulation. In this paper, we study the optimization of the mapping of the coded bits to the modulation bits for a polarization-multiplexed fiber-optical system without optical inline dispersion compensation. Our focus is on protograph-based low-density parity-check (LDPC) codes which allow for an efficient hardware implementation, suitable for high-speed optical communications. The optimiza…
