In this paper, diversity analysis of bit-interleaved coded multiple beamforming (BICMB) is extended to the case of general spatial interleavers, removing a condition on their previously known design criteria and quantifying the resulting diversity order. The diversity order is determined by a parameter Qmax which is inherited from the convolutional code and the spatial de-multiplexer used in BICMB. We introduce a method to find this parameter by employing a transfer function approach as in finding the weight spectrum of a convolutional code. By using this method, several Qmax values are shown and verified to be identical with the results from a computer search. The diversity analysis and the method to find the parameter are supported by simulation results. By using the Singleton bound, we also show that Qmax is lower bounded by the product of the number of streams and the code rate of an encoder. The design rule of the spatial de-multiplexer for a given convolutional code is proposed to meet the condition on the maximum achievable diversity order.
We study quantization of log-likelihood ratios (LLR) in bit-interleaved coded modulation (BICM) systems in terms of an equivalent discrete channel. We propose to design the quantizer such that the quantizer outputs become equiprobable. We investigate semi-analytically and numerically the ergodic and outage capacity over single- and multiple-antenna channels for different quantizers. Finally, we show bit error rate simulations for BICM systems with LLR quantization using a rate 1/2 low-density parity-check code.
Caire, Taricco and Biglieri presented a detailed analysis of bit interleaved coded modulation, a simple and popular technique used to improve system performance, especially in the context of fading channels. They derived an upper bound to the probability of error, called the expurgated bound. In this correspondence, the proof of the expurgated bound is shown to be flawed. A new upper bound is also derived. It is not known whether the original expurgated bound is valid for the important special case of square QAM with Gray labeling, but the new bound is very close to, and slightly tighter than,…
In this paper, we present the diversity order analysis of bit-interleaved coded multiple beamforming (BICMB) combined with the constellation precoding scheme. Multiple beamforming is realized by singular value decomposition of the channel matrix which is assumed to be perfectly known to the transmitter as well as the receiver. Previously, BICMB is known to have a diversity order bound related with the product of the code rate and the number of parallel subchannels, losing the full diversity order in some cases. In this paper, we show that BICMB combined with the constellation precoder and maxi…
Multiple beamforming is realized by singular value decomposition of the channel matrix which is assumed to be known to both the transmitter and the receiver. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve full diversity as long as the code rate Rc and the number of employed subchannels S satisfy the condition RcS<=1. Bit-Interleaved Coded Multiple Beamforming with Constellation Precoding (BICMB-CP), on the other hand, can achieve full diversity without the condition RcS<=1. However, the decoding complexity of BICMB-CP is much higher than BICMB. In this paper, a reduced complexi…
The wideband regime of bit-interleaved coded modulation (BICM) in Gaussian channels is studied. The Taylor expansion of the coded modulation capacity for generic signal constellations at low signal-to-noise ratio (SNR) is derived and used to determine the corresponding expansion for the BICM capacity. Simple formulas for the minimum energy per bit and the wideband slope are given. BICM is found to be suboptimal in the sense that its minimum energy per bit can be larger than the corresponding value for coded modulation schemes. The minimum energy per bit using standard Gray mapping on M-PAM or …
Delayed bit-interleaved coded modulation (DBICM) generalizes bit-interleaved coded modulation (BICM) by modulating differently delayed sub-blocks of codewords onto the same signals. DBICM improves transmission reliability over BICM due to its capability of detecting undelayed sub-blocks with the extrinsic information of the decoded delayed sub-blocks. In this work, we propose a novel windowed decoding algorithm for DBICM, which uses the extrinsic information of both the decoded delayed and undelayed sub-blocks, to improve the detection on all sub-blocks. Numerical results show that the propose…
This paper investigates the design and performance of delayed bit-interleaved coded modulation (DBICM) with low-density parity-check (LDPC) codes. For Gray labeled square $M$-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. When analyzing the capacity of DBICM, we find two important properties: the capacity improvement due to delayed coded bits being mapped to the real and imaginary parts of the transmitted symbols ar…
A new variant of bit interleaved coded modulation (BICM) is proposed. In the new scheme, called Parallel BICM, L identical binary codes are used in parallel using a mapper, a newly proposed finite-length interleaver and a binary dither signal. As opposed to previous approaches, the scheme does not rely on any assumptions of an ideal, infinite-length interleaver. Over a memoryless channel, the new scheme is proven to be equivalent to a binary memoryless channel. Therefore the scheme enables one to easily design coded modulation schemes using a simple binary code that was designed for that binar…
This paper addresses the performance of bit-interleaved coded multiple beamforming (BICMB) [1], [2] with imperfect knowledge of beamforming vectors. Most studies for limited-rate channel state information at the transmitter (CSIT) assume that the precoding matrix has an invariance property under an arbitrary unitary transform. In BICMB, this property does not hold. On the other hand, the optimum precoder and detector for BICMB are invariant under a diagonal unitary transform. In order to design a limited-rate CSIT system for BICMB, we propose a new distortion measure optimum under this invaria…
It is shown that while the mutual information curves for coded modulation (CM) and bit interleaved coded modulation (BICM) overlap in the case of a single input single output channel, the same is not true in multiple input multiple output (MIMO) channels. A method for mitigating fading in the presence of multiple transmit antennas, named coordinate interleaving (CI), is presented as a generalization of component interleaving for a single transmit antenna. The extent of any advantages of CI over BICM, relative to CM, is analyzed from a mutual information perspective; the analysis is based on an…
The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders,…
When the Channel State Information (CSI) is known by both the transmitter and the receiver, beamforming techniques employing Singular Value Decomposition (SVD) are commonly used in Multiple-Input Multiple-Output (MIMO) systems. Without channel coding, there is a trade-off between full diversity and full multiplexing. When channel coding is added, both of them can be achieved as long as the code rate Rc and the number of employed subchannels S satisfy the condition RcS<=1. By adding a properly designed constellation precoder, both full diversity and full multiplexing can be achieved for both un…
This letter investigates bit-interleaved coded multiple beamforming (BICMB) with perfect coding in millimeter-wave (mm-wave) massive multiple-input multiple-output (MIMO) systems to achieve both maximum diversity gain and multiplexing gain. Using perfect coding with BICMB enables us to do this. We show that by using BICMB and perfect coding, the diversity gain becomes independent from the number of transmitted data streams and the number of antennas in each remote antenna unit (RAU) at the transmitter and the receiver. The assumption is that the perfect channel state information (CSI) is known…
For broadband wireless communication systems, Orthogonal Frequency Division Multiplexing (OFDM) has been combined with Multi-Input Multi-Output (MIMO) techniques. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve both spatial diversity and spatial multiplexing for flat fading MIMO channels. For frequency selective fading MIMO channels, BICMB with OFDM (BICMB-OFDM) can be applied to achieve both spatial diversity and multipath diversity, making it an important technique. However, analyzing the diversity of BICMB-OFDM is a challenging problem. In this paper, the diversity analysis o…
This paper investigates the design of spatially coupled low-density parity-check (SC-LDPC) codes constructed from connected-chain ensembles for bit-interleaved coded modulation (BICM) schemes. For short coupling lengths, connecting multiple SC-LDPC chains can improve decoding performance over single-chains and impose structured unequal error protection (UEP). A joint design of connected-chain ensembles and bit mapping to further exploit the UEP from codes and high-order modulations is proposed. Numerical results demonstrate the superiority of the proposed design over existing connected-chain e…
This paper develops a low-complexity near-optimal non-coherent receiver for a multi-level energy-based coded modulation system. Inspired by the turbo processing principle, we incorporate the fundamentals of bit-interleaved coded modulation with iterative decoding (BICM-ID) into the proposed receiver design. The resulting system is called bit-interleaved coded energy-based modulation with iterative decoding (BICEM-ID) and its error performance is analytically studied. Specifically, we derive upper bounds on the average pairwise error probability (PEP) of the non-coherent BICEM-ID system in the …
We revisit the information-theoretic analysis of bit-interleaved coded modulation (BICM) by modeling the BICM decoder as a mismatched decoder. The mismatched decoding model is well-defined for finite, yet arbitrary, block lengths, and naturally captures the channel memory among the bits belonging to the same symbol. We give two independent proofs of the achievability of the BICM capacity calculated by Caire et al. where BICM was modeled as a set of independent parallel binary-input channels whose output is the bitwise log-likelihood ratio. Our first achievability proof uses typical sequences, …
Bit-interleaved coded modulation (BICM) has attracted considerable attention from the research community in the past three decades, because it can achieve desirable error performance with relatively low implementation complexity for a large number of communication and storage systems. By exploiting the iterative demapping and decoding (ID), the BICM is able to approach capacity limits of coded modulation over various channels. In recent years, protograph low-density parity-check (PLDPC) codes and their spatially-coupled (SC) variants have emerged to be a pragmatic forward-error-correction (FEC…
An energy-efficient approach is presented for shaping a bit-interleaved low-density parity-check (LDPC) coded amplitude phase-shift keying (APSK) system. A subset of the interleaved bits output by a binary LDPC encoder are passed through a nonlinear shaping encoder whose output is more likely to be a zero than a one. The "shaping" bits are used to select from among a plurality of subconstellations, while the unshaped bits are used to select the symbol within the subconstellation. Because the shaping bits are biased, symbols from lower-energy subconstellations are selected more frequently than …
Device-to-device (D2D) aided beamforming for coded caching is considered in finite signal-to-noise ratio regime. A novel beamforming scheme is proposed where the local cache content exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and downlink transmission. In the D2D phase, users can autonomously share content with the adjacent users. The downlink phase utilizes multicast beamforming to simultaneously serve all users to fulfill the remaining content requests. We first explain the main procedure via two simple examples and then pre…
The capacity of the AWGN broadcast channel is achieved by superposition coding, but superposition of individual coded modulations expands the modulation alphabet and distorts its configuration. Coded modulation over a broadcast channel subject to a specific channel-input modulation constraint remains an important open problem. Some progress has been made in the related area of unequal-error protection modulations which can be considered single-user broadcast transmission, but it does not approach all points on the boundary of the capacity region. This paper studies broadcast coded modulation u…
In this paper we carry out the asymptotic diversity analysis for millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems by using bit interleaved coded multiple beamforming (BICMB). First, a single-user mmWave system which employs $M_t$ antenna subarrays at the transmitter and $M_r$ antenna subarrays at the receiver is studied. Each antenna subarray in the transmitter and the receiver has $N_r$ and $N_t$ antennas, respectively. We establish a theorem for the diversity gain when the number of antennas in each remote antenna unit (RAU) goes to infinity. Based on the theore…
Multi-Input Multi-Output (MIMO) techniques have been incorporated with Orthogonal Frequency Division Multiplexing (OFDM) for broadband wireless communication systems. Bit-Interleaved Coded Multiple Beamforming (BICMB) can achieve both spatial diversity and spatial multiplexing for flat fading MIMO channels. For frequency selective fading MIMO channels, BICMB with OFDM (BICMB-OFDM) can be employed to provide both spatial diversity and multipath diversity, making it an important technique. In our previous work, the subcarrier grouping technique was applied to combat the negative effect of subcar…
The Golden Code is a full-rate full-diversity space-time code, which achieves maximum coding gain for Multiple-Input Multiple-Output (MIMO) systems with two transmit and two receive antennas. Since four information symbols taken from an M-QAM constellation are selected to construct one Golden Code codeword, a maximum likelihood decoder using sphere decoding has the worst-case complexity of O(M^4), when the Channel State Information (CSI) is available at the receiver. Previously, this worst-case complexity was reduced to O(M^(2.5)) without performance degradation. When the CSI is known by the t…
An analysis of the diversity gain for bit-interleaved coded multiple beamforming (BICMB) method in millimeter-wave (mm-Wave) massive multiple-input multiple-output (MIMO) systems is carried out for both the single-user and multi-user scenario. We show that the diversity gain is independent of the number of data streams and full spatial multiplexing order can be achieved in both scenarios. Also, we show that the diversity gain in the multi-user scenario is independent of the number of users in the system and only depends on the number of the remote antenna units (RAUs) at the transmitter side, …
$2^m$-ary modulation creates $m$ bit channels which are neither independent nor identical, and this causes problems when applying polar coding because polar codes are designed for independent identical channels. Different from the existing multi-level coding (MLC) and bit-interleaved coded modulation (BICM) schemes, this paper provides a convolutional polar coded modulation (CPCM) method that preserves the low-complexity nature of BICM while offering improved spectral efficiency. Numerical results are given to show the good performance of the proposed method.
A commonly assumed drawback of multi-level coding, compared to a bit-interleaved coded modulation, is its high latency: Indeed, the levels must be decoded sequentially. In this paper, we consider polar codes to code each level. We show that the decoding time complexity of the multi-level scheme, using successive-cancellation list decoding for each polar code, is only 1.5 times the one of a single polar code, regardless of the signal-to-noise ratio and the number of levels.
Perfect Space-Time Block Codes (PSTBCs) achieve full diversity, full rate, nonvanishing constant minimum determinant, uniform average transmitted energy per antenna, and good shaping. However, the high decoding complexity is a critical issue for practice. When the Channel State Information (CSI) is available at both the transmitter and the receiver, Singular Value Decomposition (SVD) is commonly applied for a Multiple-Input Multiple-Output (MIMO) system to enhance the throughput or the performance. In this paper, two novel techniques, Perfect Coded Multiple Beamforming (PCMB) and Bit-Interleav…
Two decoder structures for coded modulation over the Gaussian and flat fading channels are studied: the maximum likelihood symbol-wise decoder, and the (suboptimal) bit-wise decoder based on the bit-interleaved coded modulation paradigm. We consider a 16-ary quadrature amplitude constellation labeled by a Gray labeling. It is shown that the asymptotic loss in terms of pairwise error probability, for any two codewords caused by the bit-wise decoder, is bounded by 1.25 dB. The analysis also shows that for the Gaussian channel the asymptotic loss is zero for a wide range of linear codes, includin…
The performance of bit-interleaved coded modulation (BICM) with bit shaping (i.e., non-equiprobable bit probabilities in the underlying binary code) is studied. For the Gaussian channel, the rates achievable with BICM and bit shaping are practically identical to those of coded modulation or multilevel coding. This identity holds for the whole range of values of signal-to-noise ratio. Moreover, the random coding error exponent of BICM significantly exceeds that of multilevel coding and is very close to that of coded modulation.
Beamforming techniques that employ Singular Value Decomposition (SVD) are commonly used in Multi-Input Multi-Output (MIMO) wireless communication systems. In the absence of channel coding, when a single symbol is transmitted, these systems achieve the full diversity order provided by the channel; whereas when multiple symbols are simultaneously transmitted, this property is lost. When channel coding is employed, full diversity order can be achieved. For example, when Bit-Interleaved Coded Modulation (BICM) is combined with this technique, full diversity order of NM in an MxN MIMO channel trans…
In this paper, a combination of Space Time Block Coded Spatial Modulation with Hybrid Analog-Digital Beamforming (STBC-SM-HBF) for Millimeter-wave (mmWave) communications is proposed in order to take advantage of the merits of Spatial Modulation (SM), Space-Time Block Codes (STBC), Analog Beamforming (ABF), and digital precoding techniques while avoiding their drawbacks. This proposed system benefits from the multiplexing gain of SM, from the transmit diversity gain of STBC, and from the Signal-to-Noise Ratio (SNR) gain of the beamformer. The simulation results demonstrate that the Zero Forcin…
Multilevel coding (MLC) is a coded modulation technique which can achieve excellent performance over a range of communication channels. Polar codes have been shown to be quite compatible with communication systems using MLC, as the rate allocation of the component polar codes follows the natural polarization inherent in polar codes. MLC based techniques have not yet been studied in systems that use spatial modulation (SM). SM makes the polar code design difficult as the spatial bits actually select a channel index for transmission. To solve this problem, we propose a Monte Carlo based evaluati…
Data detection of convolutional coded differential quaternary phase shift keyed (DQPSK) signals using a predictive Viterbi algorithm (VA) based receiver, is presented for single input, multiple output - orthogonal frequency division multiplexed (OFDM) systems. The receiver has both error correcting capability and also the ability to perform channel estimation (prediction). The predictive VA operates on a supertrellis with just $S_{\mathrm{ST}}=S_{\mathrm{E}}\times 2^{P-1}$ states instead of $S_{\mathrm{ST}}=S_{\mathrm{E}}\times 2^{P}$ states, where the complexity reduction is achieved by using…
In this paper, we design and compare multilevel polar coding (MLPC) and bit-interleaved polar coded modulation (BIPCM) for uplink sparse code multiple access (SCMA) systems that operate over fast and block fading channels. Both successive cancellation (SC) and successive cancellation list (SCL) decoding algorithms are considered. Simulation results show that, with either decoder, BIPCM performs better than its MLPC counterpart. Also, both BIPCM and MLPC exhibit a performance advantage over LTE turbo-coded and WiMAX LDPC SCMA systems when the SCL technique is used for decoding.
Bit-interleaved coded modulation (BICM) and multilevel coded modulation (MLC) are commonly used to combine polar codes with high order modulation. While BICM benefits from simple design and the separation of coding and modulation, MLC shows better performance under successive-cancellation decoding. In this paper we propose a hybrid polar coded modulation scheme that lies between BICM and MLC, wherein a fraction of bits are assigned to set-partition (SP) labeling and the remaining bits are assigned for Gray labeling. The SP labeled bits undergo sequential demodulation, using iterative demodulat…
We consider the problem of using polar codes with higher order modulation over AWGN channels. Unlike prior work, we focus on using modulation independent polar codes. That is, the polar codes are not re-designed based on the modulation used. Instead, we propose bit-permuted coded modulation (BPCM): a technique for using the multilevel coding (MLC) approach for an arbitrary polar code. The BPCM technique exploits a natural connection between MLC and polar codes. It involves applying bit permutations prior to mapping the polar code to a higher order modulation. The bit permutations are designed,…
We consider the special case of index coding over the Gaussian broadcast channel where each receiver has prior knowledge of a subset of messages at the transmitter and demands all the messages from the source. We propose a concatenated coding scheme for this problem, using an index code for the Gaussian channel as an inner code/modulation to exploit side information at the receivers, and an outer code to attain coding gain against the channel noise. We derive the capacity region of this scheme by viewing the resulting channel as a multiple-access channel with many receivers, and relate it to t…
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels are constructed and used for code design. The constructed codes perform as good as multi-edge type codes of Zhang and Kschischang (2013). For 64-ASK with probabilistic shaping, a blocklength 64800 code…
This paper investigates the bit-interleaved coded generalized spatial modulation (BICGSM) with iterative decoding (BICGSM-ID) for multiple-input multiple-output (MIMO) visible light communications (VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain (SiD) symbols and the spatial-domain (SpD) light emitting diode (LED)-index patterns are coded by a protograph low-density parity-check (P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating (SSER) method for constructing a type of novel generalized spatial modulation (GSM) constella…
In traditional cache-enabled small-cell networks (SCNs), a user can suffer strong interference due to contentcentric base station association. This may degenerate the advantage of collaborative content caching among multiple small base stations (SBSs), including probabilistic caching and coded caching. In this work, we tackle this issue by deploying multiple antennas at each SBS for interference management. Two types of beamforming are considered. One is matched-filter (MF) to strengthen the effective channel gain of the desired signal, and the other is zero-forcing (ZF) to cancel interference…
In this paper, the impact of Forward Error Correction (FEC) code namely Trellis code with interleaver on the performance of wavelet based MC-CDMA wireless communication system with the implementation of Alamouti antenna diversity scheme has been investigated in terms of Bit Error Rate (BER) as a function of Signal-to-Noise Ratio (SNR) per bit. Simulation of the system under proposed study has been done in M-ary modulation schemes (MPSK, MQAM and DPSK) over AWGN and Rayleigh fading channel incorporating Walsh Hadamard code as orthogonal spreading code to discriminate the message signal for indi…
This is the second part of a two-part series of papers. In this paper, for the generalized non-orthogonal amplify and forward (GNAF) protocol presented in Part-I, a construction of a new family of distributed space-time codes based on Co-ordinate Interleaved Orthogonal Designs (CIOD) which result in reduced Maximum Likelihood (ML) decoding complexity at the destination is proposed. Further, it is established that the recently proposed Toeplitz space-time codes as well as space-time block codes (STBCs) from cyclic division algebras can be used in GNAF protocol. Finally, a lower bound on the opt…
The polar codes are proven to be capacity-achieving and are shown to have equivalent or even better finite-length performance than the turbo/LDPC codes under some improved decoding algorithms over the additive white Gaussian noise (AWGN) channels. Polar coding is based on the so-called channel polarization phenomenon induced by a transform over the underlying binary-input channel. The channel polarization is found to be universal in many signal processing problems and has been applied to the coded modulation schemes. In this paper, the channel polarization is further extended to the multiple a…
A protograph-based low-density parity-check (LDPC) code design technique for bandwidth-efficient coded modulation is presented. The approach jointly optimizes the LDPC code node degrees and the mapping of the coded bits to the bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform input and for BICM with probabilistic shaping, binary-input symmetric-output surrogate channels for the code design are used. The constructed codes for uniform inputs perform as good as the multi-edge type codes of Zhang and Kschischang (2013). For 8-ASK and 64-ASK with probabilistic shaping, cod…
We analyze the achievable information rates (AIRs) for coded modulation schemes with QAM constellations with both bit-wise and symbol-wise decoders, corresponding to the case where a binary code is used in combination with a higher-order modulation using the bit-interleaved coded modulation (BICM) paradigm and to the case where a nonbinary code over a field matched to the constellation size is used, respectively. In particular, we consider hard decision decoding, which is the preferable option for fiber-optic communication systems where decoding complexity is a concern. Recently, Liga \emph{et…
Spatially coupled low-density parity-check (SC-LDPC) codes can achieve the channel capacity under low-complexity belief propagation (BP) decoding, however, there is a non-negligible rate-loss because of termination effects for practical finite coupling lengths. In this paper, we study how we can approach the performance of terminated SC-LDPC codes by random shortening of tail-biting SC-LDPC codes. We find the minimum required rate-loss in order to achieve the same performance than terminated codes. We additionally study the use of tail-biting SC-LDPC codes for transmission over parallel channe…
Bit-interleaved coded modulation (BICM) using (bi-)orthogonal signals is especially well suited for the application in impulse-radio ultra-wideband transmission systems, which typically operate in the power-limited regime and require a very low-complexity transmitter and receiver design. In this paper we analyze the capacity of BICM using (bi-)orthogonal signals with coherent and noncoherent detection and put particular focus on the power-limited or wideband regime. We give analytical expressions for the ratio energy per bit vs. noise power spectral density in the limit of infinite bandwidth a…
Sparse code multiple access (SCMA) is a class of non-orthogonal multiple access (NOMA) that is proposed to support uplink machine-type communication services. In an SCMA system, designing multidimensional constellation plays an important role in the performance of the system. Since the behaviour of multidimensional constellations highly depends on the type of the channel, it is crucial to employ a constellation that is suitable for a certain application. In this paper, we first highlight and review the key performance indicators (KPIs) of multidimensional constellations that should be consider…
Using the spatial modulation approach, where only one transmit antenna is active at a time, we propose two transmission schemes for two-way relay channel using physical layer network coding with space time coding using Coordinate Interleaved Orthogonal Designs (CIOD's). It is shown that using two uncorrelated transmit antennas at the nodes, but using only one RF transmit chain and space-time coding across these antennas can give a better performance without using any extra resources and without increasing the hardware implementation cost and complexity. In the first transmission scheme, two an…
A scheme is proposed that combines probabilistic signal shaping with bit-metric decoding. The transmitter generates symbols according to a distribution on the channel input alphabet. The symbols are labeled by bit strings. At the receiver, the channel output is decoded with respect to a bit-metric. An achievable rate is derived using random coding arguments. For the 8-ASK AWGN channel, numerical results show that at a spectral efficiency of 2 bits/s/Hz, the new scheme outperforms bit-interleaved coded modulation (BICM) without shaping and BICM with bit shaping (i Fabregas and Martinez, 2010) b…
In this work, we consider the problem of coding for the half-duplex non-orthogonal amplify-and-forward (NAF) cooperative channel where the transmitter to relay and the inter-relay links are highly reliable. We derive bounds on the diversity order of the NAF protocol that are achieved by a distributed space-time bit-interleaved coded modulation (D-ST-BICM) scheme under iterative APP detection and decoding. These bounds lead to the design of space-time precoders that ensure maximum diversity order and high coding gains. The word error rate performance of D-ST-BICM are also compared to outage pro…
