An iterative algorithm for reconstructing the photon distribution from the random phase homodyne statistics is discussed. This method, derived from the maximum-likelihood approach, yields a positive definite estimate for the photon distribution with bounded statistical errors even if numerical compensation for the detector imperfection is applied.
For one-mode and multimode light, the photon-number tomograms of Gaussian quantum states are explicitly calculated in terms of multivariable Hermite polynomials. Positivity of the tomograms is shown to be necessary condition for positivity of the density matrix.
To avoid the computational burden of many-body quantum simulation, the interaction of an electron with a photon (phonon) is typically accounted for by disregarding the explicit simulation of the photon (phonon) degree of freedom and just modelling its effect on the electron dynamics. For quantum models developed from the (reduced) density matrix or its Wigner-Weyl transformation, the modelling of collisions may violate complete positivity (precluding the typical probabilistic interpretation). In this paper, we show that such quantum transport models can also strongly violate the energy conserv…
We consider the propagation of polarized photons in optical fibers under the action of randomly generated noise. In such situation, the change in time of the photon polarization can be described by a quantum dynamical semigroup. We show that the hierarchy among the decay constants of the polarization density matrix elements as prescribed by complete positivity can be experimentally probed using standard laboratory set-ups.
Experimental reconstructions of photon number distributions of both continuous-wave and pulsed light beams are reported. Our scheme is based on on/off avalanche photodetection assisted by maximum-likelihood estimation and does not involve photon counting. Reconstructions of the distribution for both semiclassical and quantum states of light are reported for single-mode as well as for multimode beams.
We present a method for the determination of the completely positive (CP) map describing a physical device based on random preparation of the input states, random measurements at the output, and maximum-likelihood principle. In the numerical implementation the constraint of completely positivity can be imposed by exploiting the isomorphism between linear transformations from Hilbert spaces $\cal H$ to $\cal K$ and linear operators in ${\cal K}\otimes {\cal H}$. The effectiveness of the method is shown on the basis of some examples of reconstruction of CP maps related to quantum communication c…
We consider state reconstruction from the measurement statistics of phase space observables generated by photon number states. The results are obtained by inverting certain infinite matrices. In particular, we obtain reconstruction formulas, each of which involves only a single phase space observable.
A method for reconstructing joint photon-number distributions of twin beams from the experimental photocount histograms is suggested and experimentally implemented. Contrary to the standard reconstruction methods, it incorporates spatial noise reduction based on spatial pairing of photons. Superior performance of the method above the usual one for the maximum-likelihood approach is demonstrated.
We address the reconstruction of the full photon distribution of multimode fields generated by seeded parametric down-conversion (PDC). Our scheme is based on on/off avalanche photodetection assisted by maximum-likelihood (MaxLik) estimation and does not involve photon counting. We present a novel constrained MaxLik method that incorporates the request of finite energy to improve the rate of convergence and, in turn, the overall accuracy of the reconstruction.
Here we present a reconstruction of the Positive Operator-Value Measurement of a photon-number-resolving detector comprised of three 50:50 beamsplitters in a tree configuration, terminated with four single-photon avalanche detectors. The four detectors' outputs are processed by an electronic board that discriminates detected photon number states from 0 to 4 and implements a "smart counting" routine to compensate for dead time issues at high count rates.
The output of a photodetector consists of a current pulse whose charge has the statistical distribution of the actual photon numbers convolved with a Bernoulli distribution. Photodetectors are characterized by a nonunit quantum efficiency, i.e. not all the photons lead to a charge, and by a finite resolution, i.e. a different number of detected photons leads to a discriminable values of the charge only up to a maximum value. We present a detailed comparison, based on Monte Carlo simulated experiments and real data, among the performances of detectors with different upper limits of counting cap…
We experimentally demonstrate the reconstruction of a photon number conditioned state without using a photon number discriminating detector. By using only phase randomized homodyne measurements, we reconstruct up to the three photon subtracted squeezed vacuum state. The reconstructed Wigner functions of these states show regions of pronounced negativity, signifying the non-classical nature of the reconstructed states. The techniques presented allow for complete characterization of the role of a conditional measurement on an ensemble of states, and might prove useful in systems where photon cou…
We present a study of optical quantum states generated by subtraction of photons from the thermal state. Some aspects of their photon number and quadrature distributions are discussed and checked experimentally. We demonstrate an original method of up to ten photon subtracted state preparation with use of just one single-photon detector. All the states where measured with use of balanced homodyne technique, and the corresponding density matrices where reconstructed. The fidelity between desired and reconstructed states exceeds 99%
The quantum interference of entangled photons forms a key phenomenon underlying various quantum-optical technologies. It is known that the quantum interference patterns of entangled photon pairs can be reconstructed classically by the time-reversal method; however, the time-reversal method has been applied only to time-frequency-entangled two-photon systems in previous experiments. Here, for the first time, we apply the time-reversal method to the position-wavevector-entangled two-photon systems: the two-photon Young interferometer and the two-photon beam focusing system. We experimentally dem…
We demonstrate a practical possibility of loss compensation in measured photocounting statistics in the presence of dark counts and background radiation noise. It is shown that satisfactory results are obtained even in the case of low detection efficiency and large experimental errors.
Coherent photon-emitter interfaces offer a way to mediate efficient nonlinear photon-photon interactions, much needed for quantum information processing. Here we experimentally study the case of a two-level emitter, a quantum dot, coupled to a single optical mode in a nanophotonic waveguide. We carry out few-photon transport experiments and record the statistics of the light to reconstruct the scattering matrix elements of 1- and 2-photon components. This provides direct insight to the complex nonlinear photon interaction that contains rich many-body physics.
Exploitation of time-frequency properties of SPDC photon pairs has recently found application in many endeavors. Complete characterization and control over the states in this degree of freedom is of paramount importance for the development of optical quantum technologies. This is achieved by accessing information both on the joint spectral amplitude and the joint spectral phase. Here we propose a novel scheme based on the MICE algorithm, which aims at reconstructing the joint spectral phase by adopting a multi-shear approach, making the technique suitable for noisy environments. We report on s…
Metasurfaces based on resonant nanophotonic structures have enabled novel types of flat-optics devices often outperforming the capabilities of bulk components, yet these advances remain largely unexplored for quantum applications. We show that non-classical multi-photon interferences can be achieved at the subwavelength scale in all-dielectric metasurfaces. We simultaneously image multiple projections of quantum states with a single metasurface, enabling a robust reconstruction of amplitude, phase, coherence, and entanglement of multi-photon polarization-encoded states. One- and two-photon sta…
We suggest an iterative, maximum-likelihood-based, method to reconstruct the photon number distribution of the steady state cavity field of a micromaser starting from the statistics of the atoms leaving the cavity after the interaction. The scheme is based on measuring the atomic populations of probe atoms for different interaction times and works effectively using a small number of atoms and a limited sampling of the interaction times. The method has been tested by numerically simulated experiments showing that it may be reliably used in any micromaser regime leading to high-fidelity reconstr…
We have reconstructed the quantum state of optical pulses containing single photons using the method of phase-randomized pulsed optical homodyne tomography. The single-photon Fock state |1> was prepared using conditional measurements on photon pairs born in the process of parametric down-conversion. A probability distribution of the phase-averaged electric field amplitudes with a strongly non-Gaussian shape is obtained with the total detection efficiency of (55+-1)%. The angle-averaged Wigner function reconstructed from this distribution shows a strong dip reaching classically impossible negat…
A single-photon Fock state has been generated by means of conditional preparation from a two-photon state emitted in the process of spontaneous parametric down-conversion. A recently developed high-frequency homodyne tomography technique has been used to completely characterize the Fock state by means of a pulse-to-pulse analysis of the detectors' difference photocurrent. The density matrix elements of the generated state have been retrieved with a final detection efficiency of about 57%. A comparison has been performed between the phase-averaged tomographic reconstructions of the Wigner funct…
Reconstruction of photon statistics of optical states provide fundamental information on the nature of any optical field and find various relevant applications. Nevertheless, no detector that can reliably discriminate the number of incident photons is available. On the other hand the alternative of reconstructing density matrix by quantum tomography leads to various technical difficulties that are particular severe in the pulsed regime (where mode matching between signal an local oscillator is very challenging). Even if on/off detectors, as usual avalanche PhotoDiodes operating in Geiger mode,…
The possibilities of recording, storage and reconstruction of short single photon wave packets in the photon echo technique are analyzed. The influence of the photon field and medium parameters on the quality and precision of the photon quantum state reconstruction is theoretically studied.
Photon-number resolving detectors are a fundamental building-block of optical quantum information processing protocols. A loop detector, combined with appropriate statistical processing, can be used to convert a binary on/off photon counter into a photon-number-resolving detector. Here we describe the idea of a signature of photon-counts, which may be used to more robustly reconstruct the photon number distribution of a quantum state. The methodology is applied experimentally in a 9-port loop detector operating at a telecommunications wavelength and compared directly to the approach whereby on…
We present a filtered backprojection algorithm for reconstructing the Wigner function of a system of large angular momentum j from Stern-Gerlach-type measurements. Our method is advantageous over the full determination of the density matrix in that it is insensitive to experimental fluctuations in j, and allows for a natural elimination of high-frequency noise in the Wigner function by taking into account the experimental uncertainties in the determination of j, its projection m, and the quantization axis orientation. No data binning and no arbitrary smoothing parameters are necessary in this …
Correlations in twin beams composed of many photon pairs are studied using an intensified CCD camera. Joint signal-idler photon-number distribution and quantum phase-space quasi-distributions determined from experimental data have nonclassical features.
We present the reconstruction of the Wigner function of a classical phase-sensitive state, a pulsed coherent state, by measurements of the distributions of detected-photons of the state displaced by a coherent probe field. By using a hybrid photodetector operated above its photon-resolving regime, we obtained both the statistics at different values of the probe field and the values of the probe phase required to reconstruct the Wigner function.
We have performed the first experimental tomographic reconstruction of a three-photon polarization state. Quantum state tomography is a powerful tool for fully describing the density matrix of a quantum system. We measured 64 three-photon polarization correlations and used a "maximum-likelihood" reconstruction method to reconstruct the GHZ state. The entanglement class has been characterized using an entanglement witness operator and the maximum predicted values for the Mermin inequality was extracted.
We perform quantum state reconstruction of coherent and thermal states with a detector which has an enhanced multiphoton response. The detector is based on superconducting nanowires, where the bias current sets the dependence of the click probability on the photon number; this bias current is used as tuning parameter in the state reconstruction. The nonlinear response makes our nanowire-based detector superior to the linear detectors that are conventionally used for quantum state reconstruction.
Integrated single-photon detectors open new possibilities for monitoring inside quantum photonic circuits. We present a concept for the in-line measurement of spatially-encoded multi-photon quantum states, while keeping the transmitted ones undisturbed. We theoretically establish that by recording photon correlations from optimally positioned detectors on top of coupled waveguides with detuned propagation constants, one can perform robust reconstruction of the density matrix describing the amplitude, phase, coherence and quantum entanglement. We report proof-of-principle experiments using clas…
We present a method to reconstruct the complete statistical mode structure and optical losses of multimode conjugated optical fields using an experimentally measured joint photon-number probability distribution. We demonstrate that this method evaluates classical and non-classical properties using a single measurement technique and is well-suited for quantum mesoscopic state characterization. We obtain a nearly-perfect reconstruction of a field comprised of up to 10 modes based on a minimal set of assumptions. To show the utility of this method, we use it to reconstruct the mode structure of a…
We consider the two-level system approximation of a single emitter driven by a continuous laser pump and simultaneously coupled to the electromagnetic vacuum and to a thermal reservoir beyond the Markovian approximation. We discuss the connection between a rigorous microscopic theory and the phenomenological spectral diffusion approach, used to model the interaction of the emitter with the thermal bath, and obtained analytic expressions relating the thermal correlation function to the single emitter photon statistics.
A wide range of experiments studying microwave photons localized in superconducting cavities have made important contributions to our understanding of the quantum properties of radiation. Propagating microwave photons, however, have so far been studied much less intensely. Here we present measurements in which we reconstruct the Wigner function of itinerant single photon Fock states and their superposition with the vacuum using linear amplifiers and quadrature amplitude detectors. We have developed efficient methods to separate the detected single photon signal from the noise added by the ampl…
We present a conceptual approach to quantum tomography based on first expanding a quantum state across extra degrees of freedom and then exploiting the introduced sparsity to perform reconstruction. We formulate its application to photonic circuits, and show that measured spatial photon correlations at the output of a specially tailored discrete-continuous quantum-walk can enable full reconstruction of any two-photon spatially entangled and mixed state at the input. This approach does not require any tunable elements, so is well suited for integration with on-chip superconducting photon detect…
We report on the first realization of time-dependent quantum detector tomography for commercially available InGaAs avalanche photo detectors. For the construction of appropriate time-dependent POVMs from experimentally measured data, we introduce a novel scheme to calculate the weight of the regularization term based on the amount of measured data. We compare our POVM-based results with the theoretical predictions of the previously developed model by Gouzien et al. In contrast to our measurement-based construction of a time-dependent POVM for photon detectors, this previous investigation exten…