We present a simple method for constructing optimal fault-tolerant approximations of arbitrary unitary gates using an arbitrary discrete universal gate set. The method presented is numerical and scales exponentially with the number of gates used in the approximation. However, for the specific case of arbitrary single-qubit gates and the fault-tolerant gates permitted by the concatenated 7-qubit Steane code, we find gate sequences sufficiently long and accurate to permit the fault-tolerant factoring of numbers thousands of bits long. A general scaling law of how rapidly these fault-tolerant approximations converge to arbitrary single-qubit gates is also determined.
Steane's 7-qubit quantum error-correcting code admits a set of fault-tolerant gates that generate the Clifford group, which in itself is not universal for quantum computation. The 15-qubit Reed-Muller code also does not admit a universal fault-tolerant gate set but possesses fault-tolerant T and control-control-Z gates. Combined with the Clifford group, either of these two gates generate a universal set. Here, we combine these two features by demonstrating how to fault-tolerantly convert between these two codes, providing a new method to realize universal fault-tolerant quantum computation. On…
Fault-tolerant quantum error correction requires the measurement of error syndromes in a way that minimizes correlated errors on the quantum data. Steane and Shor ancilla are two well-known methods for fault-tolerant syndrome extraction. In this paper, we find a unifying construction that generates a family of ancilla blocks that interpolate between Shor and Steane. This family increases the complexity of ancilla construction in exchange for reducing the rounds of measurement required to fault-tolerantly measure the error. We then apply this construction to the toric code of size $L\times L$ a…
Steane's seven-qubit quantum code is a natural choice for fault-tolerance experiments because it is small and just two extra qubits are enough to correct errors. However, the two-qubit error-correction technique, known as "flagged" syndrome extraction, works slowly, measuring only one syndrome at a time. This is a disadvantage in experiments with high qubit rest error rates. We extend the technique to extract multiple syndromes at once, without needing more qubits. Qubits for different syndromes can flag errors in each other. This gives equally fast and more qubit-efficient alternatives to Ste…
Fault-tolerant quantum computation using quantum error-correcting codes requires fault-tolerant constructions of nontransversal gates. Shor proposed a fault-tolerant construction of a nontransversal gate, i.e., the Toffoli gate for a family of the Calderbank-Shor-Steane codes which has even-weight stabilizer generators and odd-weight logical operators. In fact, as shown in this paper, error propagations in the ancilla preparation of Shor's construction lead to logical errors. This work provides a solution to this problem through the insertion of bit flip error correction. Finally, error rates …
We propose a scheme that converts a stabilizer code into another stabilizer code in a fault tolerant manner. The scheme first puts both codes in specific forms, and proceeds the conversion from a source code to a target code by applying Clifford gates. The Clifford gates are chosen from the comparisons between both codes. The fault tolerance of the conversion is guaranteed by quantum error correction in every step during the entire conversion process. As examples, we show three conversions: the $[[5,1,3]]$ stabilizer code and Steane code, Steane code and $[[15,1,3]]$ Reed-Muller code, and Stea…
Continuous-angle logical rotations in the Steane code
Joint Center for Quantum Information and Computer Science, NIST/University of Maryland（量子信息与计算机科学联合中心，美国国家标准与技术研究院/马里兰大学）；IonQ, Inc.（IonQ公司）；Department of Physics, The University of Texas at Austin（德克萨斯大学奥斯汀分校物理系）；Duke Quantum Center, Department of Electrical & Computer Engineering and Department of Physics, Duke University（杜克大学量子中心、电气与计算机工程系及物理系）；National Institute of Standards and Technology（美国国家标准与技术研究院）
Shor and Steane ancilla are two well-known methods for fault-tolerant logical measurements, which are successful on small codes and their concatenations. On large quantum low-density-parity-check (LDPC) codes, however, Shor and Steane measurements have impractical time and space overhead respectively. In this work, we widen the choice of ancilla codes by unifying Shor and Steane measurements into a single framework, called homomorphic measurements. For any Calderbank-Shor-Steane (CSS) code with the appropriate ancilla code, one can avoid repetitive measurements or complicated ancilla state pre…
To perform achieve fault-tolerant quantum computation, one can use flagged syndrome extraction with fewer ancilla qubits. However, it suffers from long circuit depth if one stabilizer is measured at a time. Previously, Reichardt showed that it is possible to measure multiple stabilizers with at most one shared flag qubit for certain small quantum codes. In this paper, we propose a procedure for general Calderbank-Shor-Steane codes of distance three so that multiple $Z$-stabilizers ($X$-stabilizers) can be fault-tolerantly measured in parallel with one shared flag qubit. We simulate the memory …
In the shallow sub-threshold regime, fault-tolerant quantum computation requires a tremendous amount of qubits. In this paper, we study the error correction in the deep sub-threshold regime. We estimate the physical error rate for achieving the logical error rates of $10^{-6} - 10^{-15}$ using few-qubit codes, i.e. short repetition codes, small surface codes and the Steane code. Error correction circuits that are efficient for biased error channels are identified. Using the Steane code, when error channels are biased with a ratio of $10^{-3}$, the logical error rate of $10^{-15}$ can be achiev…
CSS codes are a subfamily of stabilizer codes especially appropriate for fault-tolerant quantum computations. A very simple method is proposed to encode a general qudit when a Calderbank-Shor-Steane quantum code, defined over a q-ary alphabet, is used.
A common assumption in analyses of error thresholds and quantum computing in general is that one applies fault-tolerant quantum error correction (FTQEC) after every gate. This, however, is known not to always be optimal if the FTQEC procedure itself can introduce errors. We investigate the effect of varying the number of logical gates between FTQEC operations, and in particular the case where failure of a postselection condition in FTQEC may cause FTQEC to be skipped with high probability. By using a simplified model of errors induced in FTQEC, we derive an expression for the logical error rat…
A major goal for fault-tolerant quantum computation (FTQC) is to reduce the overhead needed for error correction. One approach is to use block codes that encode multiple qubits, which can achieve significantly higher rates for the same code distance than single-qubit code blocks or topological codes. We present a scheme for universal quantum computation using multi-qubit Calderbank-Shor-Steane (CSS) block codes, where codes admitting different transversal gates are used to achieve universality, and logical teleportation is used to move qubits between code blocks. All circuits for both computat…
Stabilizer states are extensively studied in quantum information theory for their structures based on the Pauli group. Calderbank-Shor-Steane (CSS) stabilizer states are of particular importance in their application to fault-tolerant quantum computation (FTQC). However, how to fault-tolerantly prepare arbitrary CSS stabilizer states for general CSS stabilizer codes is still unknown, and their preparation can be highly costly in computational resources. In this paper, we show how to prepare a large class of CSS stabilizer states useful for FTQC. We propose distillation protocols using syndrome …
In quantum error correction using imperfect primitives, errors of high weight arising from a few faults are major concerns since they might not be correctable by the quantum error correcting code. Fortunately, some errors of different weights are logically equivalent and the same correction procedure is applicable to all equivalent errors, thus correcting high-weight errors is sometimes possible. In this work, we introduce a technique called weight parity error correction (WPEC) which can correct Pauli error of any weight in some stabilizer codes provided that the parity of the weight of the e…
Quantum walks are expected to serve important modelling and algorithmic applications in many areas of science and mathematics. Although quantum walks have been successfully implemented physically in recent times, no major efforts have been made to combat the error associated with these physical implementations in a fault-tolerant manner. In this paper, we propose a systematic method to implement fault-tolerant quantum walks in discrete time on arbitrarily complex graphs, using quantum states encoded with the Steane code and a set of universal fault tolerant matrix operations.
In this work we discuss the ability of different types of ancillas to control the decoherence of a qubit interacting with an environment. The error is introduced into the numerical simulation via a depolarizing isotropic channel. After the correction we calculate the fidelity as a quality criterion for the qubit recovered. We observe that a recovery method with a three-qubit ancilla provides reasonable good results bearing in mind its economy. If we want to go further, we have to use fault-tolerant ancillas with a high degree of parallelism, even if this condition implies introducing new ancil…
In this paper we demonstrate how data encoded in a five-qubit quantum error correction code can be converted, fault-tolerantly, into a seven-qubit Steane code. This is achieved by progressing through a series of codes, each of which fault-tolerantly corrects at least one error. Throughout the conversion the encoded qubit remains protected. We found, through computational search, that the method used to convert between codes given in this paper is optimal.
Fault-tolerant (FT) computation by using quantum error correction (QEC) is essential for realizing large-scale quantum algorithms. Devices are expected to have enough qubits to demonstrate aspects of fault tolerance in the near future. However, these near-term quantum processors will only contain a small amount of noisy qubits and allow limited qubit connectivity. Fault-tolerant schemes that not only have low qubit overhead but also comply with geometrical interaction constraints are therefore necessary. In this work, we combine flag fault tolerance with quantum circuit mapping, to enable an e…
A novel scheme is presented for fault-tolerant quantum computation based on the cluster model. Some relevant logical cluster states are constructed in concatenation by post-selection through verification, without necessity of recovery operation, where a suitable code such as the Steane's 7-qubit code is adopted for transversal operations. This simple concatenated construction of verified cluster states achieves a high noise threshold ~1%, and restrains the divergence of resources.
Fault-tolerant quantum computation (FTQC) schemes using large block codes that encode $k>1$ qubits in $n$ physical qubits can potentially reduce the resource overhead to a great extent because of their high encoding rate. However, the fault-tolerant (FT) logical operations for the encoded qubits are difficult to find and implement, which usually takes not only a very large resource overhead but also long $\textit{in-situ}$ computation time. In this paper, we focus on Calderbank-Shor-Steane $[\![ n,k,d ]\!]$ (CSS) codes and their logical FT Clifford circuits. We show that the depth of an arbitr…
We consider tensor-network stabilizer codes and show that their tensor-network decoder has the property that independent logical qubits can be decoded in parallel. As long as the error rate is below threshold, we show that this parallel decoder is essentially optimal. As an application, we verify this for the max-rate holographic Steane (heptagon) code. For holographic codes this tensor-network decoder was shown to be efficient with complexity polynomial in n, the number of physical qubits. Here we show that, by using the parallel decoding scheme, the complexity is also linear in k, the number…
We discuss two methods to encode one qubit into six physical qubits. Each of our two examples corrects an arbitrary single-qubit error. Our first example is a degenerate six-qubit quantum error-correcting code. We explicitly provide the stabilizer generators, encoding circuit, codewords, logical Pauli operators, and logical CNOT operator for this code. We also show how to convert this code into a non-trivial subsystem code that saturates the subsystem Singleton bound. We then prove that a six-qubit code without entanglement assistance cannot simultaneously possess a Calderbank-Shor-Steane (CSS…
I describe a procedure for calculating thresholds for quantum computation as a function of error model given the availability of ancillae prepared in logical states with independent, identically distributed errors. The thresholds are determined via a simple counting argument performed on a single qubit of an infinitely large CSS code. I give concrete examples of thresholds thus achievable for both Steane and Knill style fault-tolerant implementations and investigate their relation to threshold estimates in the literature.
We investigate a scheme of fault-tolerant quantum computation based on the cluster model. Logical qubits are encoded by a suitable code such as the Steane's 7-qubit code. Cluster states of logical qubits are prepared by post-selection through verification at high fidelity level, where the unsuccessful ones are discarded without recovery operation. Then, gate operations are implemented by transversal measurements on the prepared logical cluster states. The noise threshold is improved significantly by making the high fidelity preparation and transversal measurement. It is estimated to be about 3…
Quantum error correction and fault-tolerant quantum computation are two fundamental concepts which make quantum computing feasible. While providing a theoretical means with which to ensure the arbitrary accuracy of any quantum circuit, fault-tolerant error correction is predicated upon the robust preparation of logical states. An optimal direct circuit and a more complex fault-tolerant circuit for the preparation of the [[7,1,3]] Steane logical-zero are simulated in the presence of discrete quantum errors to quantify the regime within which fault-tolerant preparation of logical states is prefe…
We analyze the latency of fault-tolerant quantum computing based on the 9-qubit Bacon-Shor code using a local, two-dimensional architecture. We embed the data qubits in a 7 by 7 array of physical qubits, where the extra qubits are used for ancilla preparation and qubit transportation by means of a SWAP chain. The latency is reduced with respect to a similar implementation using Steane's 7-qubit code (K. M. Svore, D. P. DiVincenzo, and B. M. Terhal, Quantum Information & Computation {\bf 7}, 297 (2007)). Furthermore, the error threshold is also improved to $2.02 \times 10^{-5}$, when memory err…
Ancilla post-selection is a common means of achieving fault-tolerance in quantum error-correction. However, it can lead to additional data errors due to movement or wait operations. Alternatives to post-selection may achieve lower overall failure rates due to avoiding such errors. We present numerical simulation results comparing the logical error rates for the fault-tolerant [[7,1,3]] Steane code using techniques of ancilla verification vs. the newer method of ancilla decoding, as described in [D.P. DiVincenzo and P. Aliferis, PRL 98, 020501 (2007)]. We simulate QEC procedures in which rhe po…
Fault-tolerant logical operations for qubits encoded by CSS codes are discussed, with emphasis on methods that apply to codes of high rate, encoding k qubits per block with k>1. It is shown that the logical qubits within a given block can be prepared by a single recovery operation in any state whose stabilizer generator separates into X and Z parts. Optimized methods to move logical qubits around and to achieve controlled-not and Toffoli gates are discussed. It is found that the number of time-steps required to complete a fault-tolerant quantum computation is the same when k>1 as when k=1.
An important approach to the fault-tolerant quantum computation is protecting the logical information using the quantum error correction. Usually, the logical information is in the form of logical qubits, which are encoded in physical qubits using quantum error correction codes. Compared with the qubit quantum computation, the fermionic quantum computation has advantages in quantum simulations of fermionic systems, e.g. molecules. In this paper, we show that the fermionic quantum computation can be universal and fault-tolerant if we encode logical Majorana fermions in physical Majorana fermion…
We propose a method for universal fault-tolerant quantum computation using concatenated quantum error correcting codes. Namely, other than computational basis state preparation as required by the DiVincenzo criteria [1], our scheme requires no special ancillary state preparation to achieve universality, as opposed to schemes such as magic state distillation. The concatenation scheme exploits the transversal properties of two different codes, combining them to provide a means to protect against low-weight arbitrary errors. We give the required properties of the error correcting codes to ensure …
Quantum computers can be protected from noise by encoding the logical quantum information redundantly into multiple qubits using error correcting codes. When manipulating the logical quantum states, it is imperative that errors caused by imperfect operations do not spread uncontrollably through the quantum register. This requires that all operations on the quantum register obey a fault-tolerant circuit design which, in general, increases the complexity of the implementation. Here, we demonstrate a fault-tolerant universal set of gates on two logical qubits in a trapped-ion quantum computer. In…
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimenta…
Using transversal gates is a straightforward and efficient technique for fault-tolerant quantum computing. Since transversal gates alone cannot be computationally universal, they must be combined with other approaches such as magic state distillation, code switching or code concatenation in order to achieve universality. In this paper we propose an alternative approach for universal fault-tolerant quantum computing mainly based on the code concatenation approach proposed in [PRL 112, 010505 (2014)] but in a non-uniform fashion. The proposed approach is described based on non-uniform concatenat…
Two fault tolerant authenticated quantum dialogue (AQD) protocols are proposed in this paper by employing logical Bell states as the quantum resource, which combat the collective-dephasing noise and the collective-rotation noise, respectively. The two proposed protocols each can accomplish the mutual identity authentication and the dialogue between two participants simultaneously and securely over one kind of collective noise channels. In each of two proposed protocols, the information transmitted through the classical channel is assumed to be eavesdroppable and modifiable. The key for choosin…
