We present the foundations of a new approach to the Casimir effect based on classical ray optics. We show that a very useful approximation to the Casimir force between arbitrarily shaped smooth conductors can be obtained from knowledge of the paths of light rays that originate at points between these bodies and close on themselves. Although an approximation, the optical method is exact for flat bodies, and is surprisingly accurate and versatile. In this paper we present a self-contained derivation of our approximation, discuss its range of validity and possible improvements, and work out three examples in detail. The results are in excellent agreement with recent precise numerical analysis for the experimentally interesting configuration of a sphere opposite an infinite plane.
The Lifshitz theory and its modifications are discussed with respect to the Nernst heat theorem and the experimental data of several recent experiments. An analysis of all available information leads to the conclusion that some concepts of statistical physics might need reconsideration.
We recently proposed a new approach to the Casimir effect based on classical ray optics (the "optical approximation"). In this paper we show how to use it to calculate the local observables of the field theory. In particular we study the energy-momentum tensor and the Casimir pressure. We work three examples in detail: parallel plates, the Casimir pendulum and a sphere opposite a plate. We also show how to calculate thermal corrections, proving that the high temperature `classical limit' is indeed valid for any smooth geometry.
We study the Casimir energy of a massless scalar field that obeys Dirichlet boundary conditions on a hyperboloid facing a plate. We use the optical approximation including the first six reflections and compare the results with the predictions of the proximity force approximation and the semi-classical method. We also consider finite size effects by contrasting the infinite with a finite plate. We find sizable and qualitative differences between the new optical method and the more traditional approaches.
We report a theoretical study of the optical properties of a three-level emitter embedded in an optical cavity including the non-rotating wave terms of the light-matter interaction Hamiltonian. Rabi oscillations induced by a continuous wave drive laser are responsible for a periodic time-modulation of the effective cavity resonance, which results in a significant dynamical Casimir emission. A clear signature of the back-action effect of the dynamical Casimir emission onto the drive laser is visible as a sizable suppression of its absorption.
We have analyzed available optical data for Au in the mid-infrared range which is important for a precise prediction of the Casimir force. Significant variation of the data demonstrates genuine sample dependence of the dielectric function. We demonstrate that the Casimir force is largely determined by the material properties in the low frequency domain and argue that therefore the precise values of the Drude parameters are crucial for an accurate evaluation of the force. These parameters can be estimated by two different methods, either by fitting real and imaginary parts of the dielectric fun…
We recently proposed a new approach to analyze the parametric resonance in a vibrating cavity based on the analysis of classical optical paths. This approach is used to examine various models of cavities with moving walls. We prove that our method is useful to extract easily basic physical outcome.
We establish an explicit analogy between the dynamical Casimir effect and the photon emission of a thin non-linear crystal pumped inside a cavity. This allows us to propose a system based on a type-I optical parametric oscillator (OPO) to simulate a cavity oscillating in vacuum at optical frequencies. The resulting photon flux is expected to be more easily detectable than with a mechanical excitation of the mirrors. We conclude by comparing different theoretical predictions and suggest that our experimental proposal could help discriminate between them.
In this study, we have derived close form of the Casimir force for the non-interacting ideal Bose gas between two slabs in harmonic-optical lattice potential by using Ketterle and van Druten approximation. We find that Bose-Einstein condensation temperature $T_{c}$ is a critical point for different physical behavior of the Casimir force. We have shown that Casimir force of confined Bose gas in the presence of the harmonic-optical potential decays with inversely proportional to $d^{5}$ when $T\leq T_{c}$. However, in the case of $T>T_{c}$, it decays exponentially depends on separation $d$ of th…
We present a new derivation of the Casimir force between two parallel plane mirrors at zero temperature. The two mirrors and the cavity they enclose are treated as quantum optical networks. They are in general lossy and characterized by frequency dependent reflection amplitudes. The additional fluctuations accompanying losses are deduced from expressions of the optical theorem. A general proof is given for the theorem relating the spectral density inside the cavity to the reflection amplitudes seen by the inner fields. This density determines the vacuum radiation pressure and, therefore, the C…
The Casimir force, originating from vacuum zero-point energy, is one of the most intriguing purely quantum effects. It has attracted renewed interests in current field of nanomechanics, due to the rapid size decrease of on-chip devices. Here we study the optomechanically-induced transparency (OMIT) with a tunable Casimir force. We find that the optical output rate can be significantly altered by the vacuum force, even terminated and then restored, indicating a highly-controlled optical switch. Our result addresses the possibility of designing exotic optical nano-devices by harnessing the power…
An atom irradiated by an off-resonant laser field near a surface is expected to experience the sum of two fundamental potentials, the optical potential of the laser field and the Casimir--Polder potential of the surface. Here, we report a new non-additive potential, namely the laser-induced Casimir--Polder potential, which arises from a correlated coupling of the atom with both the laser and the quantum vacuum. We apply this result to an experimentally realizable scenario of an atomic mirror with an evanescent laser beam leaking out of a surface. We show that the non-additive term is significa…
Zero-point energy is generally known to be unphysical. Casimir effect, however, is often presented as a counterexample, giving rise to a conceptual confusion. To resolve the confusion we study foundational aspects of Casimir effect at a qualitative level, but also at a quantitative level within a simple toy model with only 3 degrees of freedom. In particular, we point out that Casimir vacuum is not a state without photons, and not a ground state for a Hamiltonian that can describe Casimir force. Instead, Casimir vacuum can be related to the photon vacuum by a non-trivial Bogoliubov transformat…
We extend a fictitious-cavity approach to calculate the Casimir effect for cavities bounded by flat anisotropic materials. We calculate the energy, force and torque in terms only of the optical coefficients of the walls of the cavity. We calculate the Casimir effect at zero and finite temperature for some simple systems. As a non trivial application, we calculate the torque between a semi-infinite anisotropic plate and an anisotropic film. We study the effect of the film thickness in the torque and find an optimal width that maximizes the torque.
Cavities with periodically oscillating mirrors have been predicted to excite photon pairs out of the quantum vacuum in a process known as the Dynamical Casimir effect. Here we propose and analyse an experimental layout that can provide an efficient modulation of the effective optical length of a cavity mode in the near-infrared spectral region. An analytical model of the dynamical Casimir emission is developed and compared to the predictions of a direct numerical solution of Maxwell's equations in real time. A sizeable intensity of dynamical Casimir emission is anticipated for realistic operat…
The Casimir and Casimir-Polder interactions are investigated in a stack of equally spaced graphene layers. The optical response of the individual graphene is taken into account using gauge invariant components of the polarization tensor extended to the whole complex frequency plane. The planar symmetry for the electromagnetic boundary conditions is further used to obtain explicit forms for the Casimir energy stored in the stack and the Casimir-Polder energy between an atom above the stack. Our calculations show that these fluctuation induced interactions experience strong thermal effects due t…
The attractive force between metallic surfaces, predicted by Casimir in 1948, seems to indicate the physical existence and measurability of the quantized electromagnetic field's zero-point energy. It is shown in this article, that the measurements of that force do not confirm Casimir's model, but in fact disprove it's foundational assumption that metal plates may be represented in the theory by quantum-field-theoretical boundaries. The consequences for the cosmological constant problem are discussed.
We consider the Casimir interaction between a ferromagnetic and a non-magnetic mirror, and show how the Casimir effect gives rise to a magnetic anisotropy in the ferromagnetic layer. The anisotropy is out-of-plane if the non-magnetic plate is optically isotropic. If the non-magnetic plate shows a uniaxial optical anisotropy (with optical axis in the plate plane), we find an in-plane magnetic anisotropy. In both cases, the energetically most favorable magnetization orientation is given by the competition between polar, longitudinal and transverse contributions to the magneto-optical Kerr effect…
We study the dynamical Casimir effect in the presence of a finite coherence time, which is associated with a finite quality factor of the optical cavity. We use the time refraction model, where a fixed cavity with a modulated optical medium, replaces the empty cavity with a vibrating mirror. Temporal coherence is described with the help of cavity quasi-mode operators. Asymptotic expressions for the number of photon pairs generated from vacuum are derived.
We study a quantum model of dynamical Casimir effect in an optical cavity enclosed by a freely moving mirror attached to a harmonic spring. The quantum fluctuations of the friction force exerted by the dynamical Casimir emission onto the moving mirror are investigated, as well as their consequences on the quantum state of the mirror oscillation. Observable signatures of the interplay of the nonlinear nature of the effective mirror-cavity coupling and of the discreteness of the emitted photons are pointed out, in particular as a fast diffusion of the mirror oscillation phase. These results are …
Casimir-type forces, such as those between two neutral conducting plates, or between a sphere, atom or molecule and a plate have been widely studied and are becoming of increasing significance, for example, in nanotechnology. A key challenge is to better understand, from a fundamental microscopic approach, why the Casimir force is in some circumstances attractive and in others repulsive. Here, we study the Casimir-Polder forces experienced by small quantum systems such as atoms or molecules in an optical cavity. In order to make the problem more tractable, we work in a 1+1 dimensional setting,…
An experimentally feasible realization of testing quantum-vacuum geometric phases of photons by using a gyrotropic-medium optical fibre via Casimir's effect is proposed.
We discuss the prospects of employing an NbN superconducting microwave stripline resonator for studying the dynamical Casimir effect experimentally. Preliminary experimental results, in which optical illumination is employed for modulating the resonance frequencies of the resonator, show that such a system is highly promising for this purpose. Moreover, we discuss the undesirable effect of heating which results from the optical illumination, and show that degradation in noise properties can be minimized by employing an appropriate design.
We consider an optical cavity enclosed by a freely moving mirror attached to a spring and we study the quantum friction effect exerted by the dynamical Casimir emission on the mechanical motion of the mirror. Observable signatures of this simplest example of back-reaction effect are studied in both the ring-down oscillations of the mirror motion and in its steady-state motion under a monochromatic force. Analytical expressions are found in simple yet relevant cases and compared to complete numerical solution of the master equation. A circuit-QED device allowing for experimental observation of …
We propose to use optical tweezers to probe the Casimir interaction between microspheres inside a liquid medium for geometric aspect ratios far beyond the validity of the widely employed proximity force approximation. This setup has the potential for revealing unprecedented features associated to the non-trivial role of the spherical curvatures. For a proof of concept, we measure femtonewton double layer forces between polystyrene microspheres at distances above $400$ nm by employing very soft optical tweezers, with stiffness of the order of fractions of a fN/nm. As a future application, we pr…
Precise optical properties of metals are very important for accurate prediction of the Casimir force acting between two metallic plates. Therefore we measured ellipsometrically the optical responses of Au films in a wide range of wavelengths from 0.14 mum to 33 mum. The films at various thickness were deposited at different conditions on silicon or mica substrates. Considerable variation of the frequency dependent dielectric function from sample to sample was found. Detailed analysis of the dielectric functions was performed to check the Kramers-Kronig consistency, and extract the Drude parame…
We propose two novel experiments on the measurement of the Casimir force acting between a gold coated sphere and semiconductor plates with markedly different charge carrier densities. In the first of these experiments a patterned Si plate is used which consists of two sections of different dopant densities and oscillates in the horizontal direction below a sphere. The measurement scheme in this experiment is differential, i.e., allows the direct high-precision measurement of the difference of the Casimir forces between the sphere and sections of the patterned plate or the difference of the equ…
The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for sub-micron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors, because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute $ε…
We propose the experimental scheme and present detailed theory of the optical chopper which functionality is based on the balance between the Casimir and light pressures. The proposed device consists of two atomically thin metallic mirrors forming the Fabry-Pérot microfilter. One of the mirrors is deposited on a solid cube and another one on a thinner wall subjected to bending under the influence of the attractive Casimir force and repulsive force due to the pressure of light from a continuous laser amplified in the resonator of a microfilter. The separation distance between the mirrors should…
Barash has calculated the Casimir forces between parallel birefringent plates with optical axes parallel to the plate boundaries [Izv. Vyssh. Uchebn.\ Zaved., Radiofiz., {\bf 12}, 1637 (1978)]. The interesting new feature of the solution compared to the case of isotropic plates is the existence of a Casimir torque which acts to line up the optical axes if they are not parallel or perpendicular. The forces were found from a calculation of the Helmholtz free energy of the electromagnetic field. Given the length of the calculations in this problem and hopes of an experimental measurement of the t…
We study the Casimir-Polder potential of a multilevel alkali-metal atom near an optical nanofiber. We calculate the mean potential of the atom in a fine-structure level. We perform numerical calculations for the Casimir-Polder potentials of the ground state and a few low-lying excited states of a rubidium atom. We show that, unlike the potential of the ground state, which is negative and attractive, the potential of a low-lying excited state may take positive values, oscillate around the zero value with a decaying amplitude, and become repulsive in some regions of atom-to-surface distances. We…
We study Casimir interactions between cylinders in thermal non-equilibrium, where the objects as well as the environment are held at different temperatures. We provide the general formula for the force, in a one reflection approximation, for cylinders of arbitrary radii and optical properties. As is the case for equilibrium, we find that the force for optically diluted cylinders can be obtained by appropriate summation of the corresponding result for spheres. We find that the non-equilibrium forces are generally larger than their equilibrium counterpart at separations greater than the thermal …
We study the spontaneous emission of an excited atom close to an optical nanofiber and the resulting scattering forces. For a suitably chosen orientation of the atomic dipole, the spontaneous emission pattern becomes asymmetric and a resonant Casimir--Polder force parallel to the fiber axis arises. For a simple model case, we show that the such a lateral force is due to the interaction of the circularly oscillating atomic dipole moment with its image inside the material. With the Casimir--Polder energy being constant in the lateral direction, the predicted lateral force does not derive from a …
The dynamics of three interacting objects has been investigated extensively in Newtonian gravitational physics (often termed the three-body problem), and is important for many quantum systems, including nuclei, Efimov states, and frustrated spin systems. However, the dynamics of three macroscopic objects interacting through quantum vacuum fluctuations (virtual photons) is still an unexplored frontier. Here, we report the first observation of Casimir interactions between three isolated macroscopic objects. We propose and demonstrate a three terminal switchable architecture exploiting opto-mecha…
The Lifshitz theory provides a method to calculate the Casimir force between two flat plates if the frequency dependent dielectric function of the plates is known. In reality any plate is rough and its optical properties are known only to some degree. For high precision experiments the plates must be carefully characterized otherwise the experimental result cannot be compared with the theory or with other experiments. In this chapter we explain why optical properties of interacting materials are important for the Casimir force, how they can be measured, and how one can calculate the force usin…
We present a Casimir force setup based on an all-optical ferrule-top sensor. We demonstrate that the instrument can be used to measure the gradient of the Casimir force between a gold coated sphere and a gold coated plate with results that are comparable to those achieved by similar atomic force microscope experiments. Thanks to the monolithic design of the force sensor (which does not require any optical triangulation readout) and to the absence of electronics on the sensing head, the instrument represents a significant step ahead for future studies of the Casimir effect under engineered cond…
Recent advances in experimental techniques now permit to measure the Casimir force with unprecedented precision. In order to achieve a comparable precision in the theoretical prediction of the force, it is necessary to accurately determine the electric permittivity of the materials constituting the plates along the imaginary frequency axis. The latter quantity is not directly accessible to experiments, but it can be determined via dispersion relations from experimental optical data. In the experimentally important case of conductors, however, a serious drawback of the standard dispersion relat…
It is well known that, beginning in 2000, the behavior of the thermal correction to the Casimir force between real metals has been hotly debated. As was shown by several research groups, the Lifshitz theory, which provides the theoretical foundation for the calculation of both the van der Waals and Casimir forces, leads to different results depending on the model of metal conductivity used. To resolve these controversies, the theoretical considerations based on the principles of thermodynamics and new experimental tests were invoked. We analyze the present status of the problem (in particular,…
We propose a new method to measure Casimir-Polder force in an optical cavity by means of atomic excitations. We utilize a framework in which Unruh-DeWitt Hamiltonian mimics the full matter-field interaction and find a connection between the excitation rate of the two-level atom and the Casimir-Polder energy, allowing to map one onto the other. We argue that such a realization opens a route to study Casimir-Polder potentials through measurement of excited state's population in large, spatially compact ensembles of atoms.
We present systematic measurements of the Casimir force between a gold-coated plate and a sphere coated with a Hydrogen Switchable Mirror (HSM). HSMs are shiny metals that can become transparent by hydrogenation. In spite of such a dramatic change of the optical properties of the sphere, we did not observe any significant decrease of the Casimir force after filling the experimental apparatus with hydrogen. This counterintuitive result can be explained by the Lifshitz theory that describes the Casimir attraction between metallic and dielectric materials.
We propose a new approach to the Casimir effect based on classical ray optics. We define and compute the contribution of classical optical paths to the Casimir force between rigid bodies. We reproduce the standard result for parallel plates and agree over a wide range of parameters with a recent numerical treatment of the sphere and plate with Dirichlet boundary conditions. Our approach improves upon proximity force approximation. It can be generalized easily to other geometries, other boundary conditions, to the computation of Casimir energy densities and to many other situations.
An integrated photonic approach for complex quantum state generation through dynamical Casimir effect (DCE) is demonstrated. This approach provides a scheme to realize multipartite high-dimensional entangled states in the microwave (MW) and terahertz (THz) regimes, through the modulation in a MW-resonator coupled to an optical microresonator supporting temporal optical solitons. The states at the MW-resonator evolve from the ground state, realizing real-photons from the virtual photons at the ground state. The periodic modulation of the MW-resonator through a Kerr-induced refractive index chan…
Recent work by Jaffe and Scardicchio has expressed the optical approximation to the Casimir effect as a sum over geometric quantities. The first two authors have developed a technique which uses the complex geometry of the space of oriented affine lines in ${\Bbb{R}}^3$ to describe reflection of rays off a surface. This allows the quantities in the optical approximation to the Casimir effect to be calculated. To illustrate this we determine explicitly and in closed form the geometric optics approximation of the Casimir force between two non-parallel plates. By making one of the plates finite w…
We derive the leading-order correction to the proximity force approximation (PFA) result for the electromagnetic Casimir interaction in the plane-sphere geometry by developing the scattering approach in the plane-wave basis. Expressing the Casimir energy as a sum over round trips between plane and sphere, we find two distinct contributions to the correction. The first one results from the variation of the Mie reflection operator, calculated within the geometric optical WKB approximation, over the narrow Fourier interval associated to specular reflection at the vicinity of the point of closest …
The temperature dependence of the Casimir force between a real metallic plate and a metallic sphere is analyzed on the basis of optical data concerning the dispersion relation of metals such as gold and copper. Realistic permittivities imply, together with basic thermodynamic considerations, that the transverse electric zero mode does not contribute. This results in observable differences with the conventional prediction, which does not take this physical requirement into account. The results are shown to be consistent with the third law of thermodynamics, as well as being consistent with curr…
An extended Drude model, termed as the Gurzhi model, which takes into account the electron-phonon and electron-electron interactions, is applied to calculate the Casimir force between two metallic plates. It is shown that although the dielectric permittivity of the Gurzhi model has a first order pole in the upper half-plane of complex frequencies and, thus, violates the causality principle, it can be used in a restricted frequency interval in combination with the experimental permittivity determined by the optical data for the complex index of refraction. The imaginary part of the Gurzhi diele…
We review recent results obtained in the physics of the thermal Casimir force acting between two dielectrics, dielectric and metal, and between metal and semiconductor. The detailed derivation for the low-temperature behavior of the Casimir free energy, pressure and entropy in the configuration of two real dielectric plates is presented. For dielectrics with finite static dielectric permittivity it is shown that the Nernst heat theorem is satisfied. Hence, the Lifshitz theory of the van der Waals and Casimir forces is demonstrated to be consistent with thermodynamics. The nonzero dc conductivi…
We develop a unified scattering approach to dynamical Casimir problems which can be applied to both accelerating boundaries, as well as dispersive objects in relative motion. A general (trace) formula is derived for the radiation from accelerating boundaries. Applications are provided for objects with different shapes in various dimensions, and undergoing rotational or linear motion. Within this framework, photon generation is discussed in the context of a modulated optical mirror. For dispersive objects, we find general results solely in terms of the scattering matrix. Specifically, we discus…
We measure the colloidal interaction between two silica microspheres in aqueous solution in the distance range from $0.2\,μ$m to $0.5\,μ$m with the help of optical tweezers. When employing a sample with a low salt concentration, the resulting interaction is dominated by the repulsive double-layer interaction which is fully characterized. The double-layer interaction is suppressed when adding $0.22\,$M of salt to our sample, thus leading to a purely attractive Casimir signal. When analyzing the experimental data for the potential energy and force, we find good agreement with theoretical results…
The trace of a function of a Schrodinger operator minus the same for the Laplacian can be expressed in terms of the determinant of its scattering matrix. The naive formula for this determinant is divergent. Using a dispersion relation, we find another expression for it which is convergent, but needs one piece of information beyond the scattering matrix. Except for this `anomaly', we can express the Casimir energy of a compact body in terms of its optical scattering matrix, without assuming any rotational symmetry for its shape.
In this paper we study an optomechnical system enclosed by an optical cavity with one mirror attached to a spring as a closed quantum system. We provide a different angle of studying the phenomenons related to the dynamical Casimir effect via Feynman diagram technique. Dressing effects of phonon, photon and coupling strength are discussed. The energy shift of ground state is obtained. The dynamical Casimir effect is modeled by the scattering processes converting phonons to photons and the corresponding scattering amplitudes are computed. The force-force correlation function of the radiation pr…
We present boundary conditions for the electromagnetic fields on a δ-function plate, having both electric and magnetic properties, sandwiched between two magneto-electric semi-infinite half spaces. The optical properties for an isolated δ-function plate are shown to be independent of the longitudinal material properties of the plate. The Casimir-Polder energy between an isotropically polarizable atom and a magneto-electric δ-function plate is attractive for a purely electric δ-function plate, repulsive for a purely magnetic δ-function plate, and vanishes for the simultaneous perfect conductor …
We examine the conditions of validity for the Lifshitz-Matsubara sum formula for the Casimir pressure between magnetic metallic plane mirrors. As in the previously studied case of non-magnetic materials (Guerout et al, Phys. Rev. E 90 042125), we recover the usual expression for the lossy model of optical response, but not for the lossless plasma model. We also show that the modes associated with the Foucault currents play a crucial role in the limit of vanishing losses, in contrast to expectations.
When comparing experimental results with theoretical predictions of the Casimir force, the accuracy of the theory is as important as the precision of experiments. Here we evaluate the Casimir force when finite conductivity of the reflectors and finite temperature are simultaneously taken into account. We show that these two corrections are correlated, i.e. that they can not, in principle, be evaluated separately and simply multiplied. We estimate the correlation factor which measures the deviation from this common approximation. We focus our attention on the case of smooth and plane plates wit…
Optical properties of the deposited gold films are discussed in connection with the Casimir force prediction. Voids in the films and electron scattering on the grain boundaries reduce the force at small separations on the 2% level in comparison with the bulk material prediction. The contribution of the patch potential due to polycrystalline structure of the films is shown to be small for the existing Casimir force experiments.
