We study a configuration of devices that includes (1) a source of some unknown bipartite quantum state that is claimed to be the Bell state $Φ^+$ and (2) two commuting but otherwise unknown measurement apparatus, one on each side, that are each claimed to execute an orthogonal measurement at an angle $θ\in \{0, π/8, π/4\}$ that is chosen by the user. We show that, if the nine distinct probability distributions that are generated by the self checking configuration, one for each pair of angles, are consistent with the specifications, the source and the two measurement apparatus are guaranteed to be identical modulo some isomorphism to the claimed specifications. We discuss the connection with quantum cryptography.
Self-tested quantum information processing provides a means for doing useful information processing with untrusted quantum apparatus. Previous work was limited to performing computations and protocols in real Hilbert spaces, which is not a serious obstacle if one is only interested in final measurement statistics being correct (for example, getting the correct factors of a large number after running Shor's factoring algorithm). This limitation was shown by McKague et al. to be fundamental, since there is no way to experimentally distinguish any quantum experiment from a special simulation usin…
Temporal Bell-like inequalities are derived taking into account the influence of the measurement apparatus on the observed magnetic flux in a rf-SQUID. Quantum measurement theory is shown to predict violations of these inequalities only when the flux states corresponding to opposite current senses are not distinguishable. Thus rf-SQUIDs cannot help to discriminate realism and quantum mechanics at the macroscopic level.
Quantum key distribution, first proposed by Bennett and Brassard, provides a possible key distribution scheme whose security depends only on the quantum laws of physics. So far the protocol has been proved secure even under channel noise and detector faults of the receiver, but is vulnerable if the photon source used is imperfect. In this paper we propose and give a concrete design for a new concept, {\it self-checking source}, which requires the manufacturer of the photon source to provide certain tests; these tests are designed such that, if passed, the source is guaranteed to be adequate fo…
A thermally isolated quantum system undergoes unitary evolution by interacting with an external work source. The two-point energy measurement (TPM) protocol defines the work exchanged between the system and the work source by performing ideal energy measurements on the system before, and after, the unitary evolution. However, the ideal energy measurements used in the TPM protocol ultimately result from a unitary coupling with a measurement apparatus, which requires an interaction with an external work source. For the TPM protocol to be self-consistent, we must be able to perform the TPM protoc…
We demonstrate how simultaneously-operated $^{39}$K -- $^{87}$Rb interferometers exhibiting a high level of correlation can be used to make competitive tests of the university of free fall. This work provides an overview of our experimental apparatus and data analysis procedure, including a detailed study of systematic effects. With a total interrogation time of $2T = 40$ ms in a compact apparatus, we reach a statistical uncertainty on the measurement of the Eötvös parameter of $7.8 \times 10^{-8}$ after $2.4 \times 10^4$ s of integration. The main limitations to our measurement arise from a c…
A range of quantum optics experiments is discussed in which the apparatus can be modified by detector outcomes during the course of any run. Starting with a single beamsplitter network, we work our way through a series of more complex scenarios, culminating with a proposed self-intervening experiment which could provide evidence for the existence of the Heisenberg cut, the supposed boundary between classical and quantum physics.
We develop a means of simulating the evolution and measurement of a multipartite quantum state under discrete or continuous evolution using another quantum system with states and operators lying in a real Hilbert space. This extends previous results which were unable to simulate local evolution and measurements with local operators and was limited to discrete evolution. We also detail applications to Bell inequalities and self-testing of quantum apparatus.
Observed quantum correlations are known to determine in certain cases the underlying quantum state and measurements. This phenomenon is known as (quantum) self-testing. Self-testing constitutes a significant research area with practical and theoretical ramifications for quantum information theory. But since its conception two decades ago by Mayers and Yao, the common way to rigorously formulate self-testing has been in terms of operator-algebraic identities, and this formulation lacks an operational interpretation. In particular, it is unclear how to formulate self-testing in other physical th…
Self-testing is a method to infer the underlying physics of a quantum experiment in a black box scenario. As such it represents the strongest form of certification for quantum systems. In recent years a considerable self-testing literature has been developed, leading to progress in related device-independent quantum information protocols and deepening our understanding of quantum correlations. In this work we give a thorough and self-contained introduction and review of self-testing and its application to other areas of quantum information.
Self-testing refers to a device-independent way to uniquely identify the state and the measurement for uncharacterized quantum devices. The only information required comprises the number of measurements, the number of outputs of each measurement, and the statistics of each measurement. Earlier results on self-testing of multipartite state were restricted either to Dicke states or graph states. In this paper, we propose self-testing schemes for a large family of symmetric three-qubit states, namely the superposition of W state and GHZ state. We first propose and analytically prove a self-testin…
Self-testing allows classical referees to verify the quantum behaviour of some untrusted devices. Recently we developed a framework for building large self-tests by repeating a smaller self-test many times in parallel. However, the framework did not apply to the CHSH test, which tests a maximally entangled pair of qubits. CHSH is the most well known and widely used test of this type. Here we extend the parallel self-testing framework to build parallel CHSH self-tests for any number of pairs of maximally entangled qubits. Our construction achieves an error bound which is polynomial in the numbe…
Self-testing allows us to determine, through classical interaction only, whether some players in a non-local game share particular quantum states. Most work on self-testing has concentrated on developing tests for small states like one pair of maximally entangled qubits, or on tests where there is a separate player for each qubit, as in a graph state. Here we consider the case of testing many maximally entangled pairs of qubits shared between two players. Previously such a test was shown where testing is sequential, i.e., one pair is tested at a time. Here we consider the parallel case where a…
Self-testing is a device-independent examination of quantum devices based on correlations of observed statistics. Motivated by elegant progresses on self-testing strategies for measurements [Phys. Rev. Lett. 121, 250507 (2018)] and for states [New J. Phys. 20, 083041 (2018)], we develop a general self-testing procedure for multipartite generalized GHZ-state measurements. The key step is self-testing all measurement eigenstates for a general N-qubit multipartite GHZ-state measurement. Following our procedure, one only needs to perform local measurements on N-2 chosen parties of the N-partite ei…
Self-testing protocols are methods to determine the presence of shared entangled states in a device independent scenario, where no assumptions on the measurements involved in the protocol are made. A particular type of self-testing protocol, called parallel self-testing, can certify the presence of copies of a state, however such protocols typically suffer from the problem of requiring a number of measurements that increases with respect to the number of copies one aims to certify. Here we propose a procedure to transform single-copy self-testing protocols into a procedure that certifies the t…
The goal of self-testing is to characterize an a priori unknown quantum system based solely on measurement statistics, i.e. using an uncharacterized measurement device. Here we develop self-testing methods for quantum prepare-and-measure experiments, thus not necessarily relying on entanglement and/or violation of a Bell inequality. We present noise-robust techniques for self-testing sets of quantum states and measurements, assuming an upper bound on the Hilbert space dimension. We discuss in detail the case of a $2 \rightarrow 1$ random access code with qubits, for which we provide analytical…
Characterization of quantum devices received from unknown providers is a significant primary task for any quantum information processing protocol. Self-testing protocols are designed for this purpose of certifying quantum components from the observed statistics under a set of minimal assumptions. Here we propose a self-testing protocol for certifying binary Pauli measurements employing the violation of a Leggett-Garg inequality. The scenario based on temporal correlations does not require entanglement, a costly and fragile resource. Moreover, unlike previously proposed self-testing protocols i…
Self-testing refers to a method with which a classical user can certify the state and measurements of quantum systems in a device-independent way. Especially, the self-testing of entangled states is of great importance in quantum information process. A comprehensible example is that violating the CHSH inequality maximally necessarily implies the bipartite shares a singlet. One essential question in self-testing is that, when one observes a non-maximum violation, how close is the tested state to the target state (which maximally violates certain Bell inequality)? The answer to this question des…
We assess the quality of a source of allegedly pure two-qubit states using both standard tomography and methods inspired by device-independent self-testing. Even when the detection and locality loopholes are open, the latter methods can dispense with modelling of the system and the measurements. However, due to finite sample fluctuations, the estimated probability distribution usually does not satisfy the no-signaling conditions exactly. We implement data analysis that is robust against these fluctuations. We demonstrate a high ratio $f_s/f_t\approx 0.988$ between the fidelity estimated from s…
Device-independent certification, also known as self-testing, aims at guaranteeing the proper functioning of untrusted and uncharacterized devices. For example, the quality of an unknown source expected to produce two-qubit maximally entangled states can be evaluated in a bi-partite scenario, each party using two binary measurements. The most robust approach consists in deducing the fidelity of produced states with respect to a two-qubit maximally entangled state from the violation of the CHSH inequality. In this paper, we show how the self-testing of two-qubit maximally entangled states is im…
Self-testing refers to the possibility of characterizing uniquely (up to local isometries) the state and measurements contained in quantum devices, based only on the observed input-output statistics. Already in the basic case of the two-qubit singlet, self-testing is not unique: the two known criteria (the maximal violation of the CHSH inequality and the Mayers-Yao correlations) are not equivalent. It is unknown how many criteria there are. In this paper, we find the whole set of criteria for the ideal self-testing of singlet with two measurements and two outcomes on each side: it coincides wi…
Device-independent self-testing allows a verifier to certify that potentially malicious parties hold on to a specific quantum state, based only on the observed correlations. Parallel self-testing has recently been explored, aiming to self-test many copies (i.e. a tensor product) of the target state concurrently. In this work, we show that $n$ EPR pairs can be self-tested in parallel through $n$ copies of the well known CHSH game. We generalise this result further to a parallel self-test of $n$ tilted EPR pairs with arbitrary angles, and finally we show how our results and calculations can also…
Quantum entanglement is the key resource for quantum information processing. Device-independent certification of entangled states is a long standing open question, which arouses the concept of self-testing. The central aim of self-testing is to certify the state and measurements of quantum systems without any knowledge of their inner workings, even when the used devices cannot be trusted. Specifically, utilizing Bell's theorem, it is possible to place a boundary on the singlet fidelity of entangled qubits. Here, beyond this rough estimation, we experimentally demonstrate a complete self-testin…
Self-testing refers to the possibility of characterizing an unknown quantum device based only on the observed statistics. Here we develop methods for self-testing entangled quantum measurements, a key element for quantum networks. Our approach is based on the natural assumption that separated physical sources in a network should be considered independent. This provides a natural formulation of the problem of certifying entangled measurements. Considering the setup of entanglement swapping, we derive a robust self-test for the Bell-state measurement, tolerating noise levels up to 5%. We also di…
Self-testing, which refers to device independent characterization of the state and the measurement, enables the security of quantum information processing task certified independently of the operation performed inside the devices. Quantum states lie in the core of self-testing as key resources. However, for the different entangled states, usually different measurement settings should be taken in self-testing recipes. This may lead to the redundancy of measurement resources. In this work, we use fixed two-binary measurements and answer the question that what states can be self-tested with the s…
Self-testing a quantum device means verifying the existence of a certain quantum state as well as the effect of the associated measurements based only on the statistics of the measurement outcomes. Robust, i.e., error-tolerant, self-testing quantum devices are critical building blocks for quantum cryptographic protocols that rely on imperfect or untrusted quantum devices. We give a criterion which determines whether a given binary XOR game is robust self-testing with the asymptotically optimal error parameter. As an application, we prove that the celebrated CHSH game is an optimally robust sel…
Self-testing refers to the phenomenon that certain extremal quantum correlations (almost) uniquely identify the quantum system under consideration. For instance observing the maximal violation of the CHSH inequality certifies that the two parties share a singlet. While self-testing results are known for several classes of states, in many cases they are only applicable if the observed statistics are almost perfect, which makes them unsuitable for practical applications. Practically relevant self-testing bounds are much less common and moreover they all result from a single numerical method (wit…
Finding ways to test the behaviour of quantum devices is a timely enterprise, especially in the light of the rapid development of quantum technologies. Device-independent self-testing is one desirable approach, as it makes minimal assumptions on the devices being tested. In this work, we address the question of which states can be self-tested. This has been answered recently in the bipartite case [Nat. Comm. 8, 15485 (2017)], while it is largely unexplored in the multipartite case, with only a few scattered results, using a variety of different methods: maximal violation of a Bell inequality, …
Device independent certification schemes have gained a lot of interest lately, not only for their applications in quantum information tasks but also their implications towards foundations of quantum theory. The strongest form of device independent certification, known as self-testing, often requires for a Bell inequality to be maximally violated by specific quantum states and measurements. In this work, using the techniques developed recently in [S. Sarkar et al., npj Quantum Inf. 7, 151 (2021)], we provide the first self-testing scheme for the multipartite Greenberger-Horne-Zeilinger (GHZ) st…
We prove that a quantum circuit together with measurement apparatuses and EPR sources can be fully verified without any reference to some other trusted set of quantum devices. Our main assumption is that the physical system we are working with consists of several identifiable sub-systems, on which we can apply some given gates locally. To achieve our goal we define the notions of simulation and equivalence. The concept of simulation refers to producing the correct probabilities when measuring physical systems. To enable the efficient testing of the composition of quantum operations, we introdu…
To date all self-tests for high dimensional systems are confined to many-qubit states. This is due to two restrictions in the literature: the standard techniques for proving self-testing results apply only to qubits, and there are few suitable non-local games that are known to require high dimensional non-qubit states to achieve their optimal quantum value. In this paper we address these two problems. Specifically, we generalize the usual self-testing framework to q$d$its and then apply it to a generalization of the magic square game, giving a self-test for two maximally entangled pairs of q$d…
We give a construction for a self-test for any connected graph state. In other words, for each connected graph state we give a set of non-local correlations that can only be achieved (quantumly) by that particular graph state and certain local measurements. The number of correlations considered is small, being linear in the number of vertices in the graph. We also prove robustness for the test.
An experiment in which the Clauser-Horne-Shimony-Holt inequality is maximally violated is self-testing (i.e., it certifies in a device-independent way both the state and the measurements). We prove that an experiment maximally violating Gisin's elegant Bell inequality is not similarly self-testing. The reason can be traced back to the problem of distinguishing an operator from its complex conjugate. We provide a complete and explicit characterization of all scenarios in which the elegant Bell inequality is maximally violated. This enables us to see exactly how the problem plays out.
Bell nonlocality as a resource for device independent certification schemes has been studied extensively in recent years. The strongest form of device independent certification is referred to as self-testing, which given a device certifies the promised quantum state as well as quantum measurements performed on it without any knowledge of the internal workings of the device. In spite of various results on self-testing protocols, it remains a highly nontrivial problem to propose a certification scheme of qudit-qudit entangled states based on violation of a single $d$-outcome Bell inequality. Her…
Quantum nonlocality has recently been intensively studied in connection to device-independent quantum information processing, where the extremal points of the set of quantum correlations play a crucial role through self-testing. In most protocols, the proofs for self-testing rely on the maximal violation of the Bell inequalities, but there is another known proof based on the geometry of state vectors to self-test a maximally entangled state. We present a geometrical proof in the case of partially entangled states. We show that, when a set of correlators in the simplest Bell scenario satisfies …
Self-testing is a device independent method which can be used to determine the nature of a physical system or device, without knowing any detail of the inner mechanism or the physical dimension of Hilbert space of the system. The only information required are the number of measurements, number of outputs of each measurement and the statistics of each measurement. Earlier works on self testing restricted either to two parties scenario or multipartite graph states. Here, we construct a method to self-test the three-qubit $W$ state, and show how to extend it to other pure three-qubit states. Our …
Self testing is a device independent approach to estimate the state and measurement operators, without the need to assume the dimension of our quantum system. In this paper, we show that one can self test black boxes into any pure entangled two-qubit state, by performing simple Bell type experiments. The approach makes use of only one family of two-inputs/two-outputs Bell inequalities. Furthermore, we outline the sufficient conditions for one to self test any dimensional bipartite entangled state. All these methods are robust to small but inevitable experimental errors.
Quantum self-testing is a device-independent way to certify quantum states and measurements using only the input-output statistics, with minimal assumptions about the quantum devices. Because of the high demand on tolerable noise, however, experimental self-testing was limited to two-photon systems. Here, we demonstrate the first robust self-testing for multi-photon genuinely entangled quantum states. We prepare two examples of four-photon graph states, the Greenberger-Horne-Zeilinger (GHZ) states with a fidelity of 0.957(2) and the linear cluster states with a fidelity of 0.945(2). Based on t…
For every $d \geq 2$, we present a generalization of the CHSH inequality with the property that maximal violation self-tests the maximally entangled state of local dimension $d$. This is the first example of a family of inequalities with this property. Moreover, we provide a conjecture for a family of inequalities generalizing the tilted CHSH inequalities, and we conjecture that for each pure bipartite entangled state there is an inequality in the family whose maximal violation self-tests it. All of these inequalities are inspired by the self-testing correlations of [Nat. Comm. 8, 15485 (2017)…
In this article, we derive a unique procedure for quantum state estimation from a simple, self-evident principle: an experimentalist's estimate of the quantum state generated by an apparatus should be constrained by honesty. A skeptical observer should subject the estimate to a test that guarantees that a self-interested experimentalist will report the true state as accurately as possible. We also find a non-asymptotic, operational interpretation of the quantum relative entropy function.
Self-testing protocols enable certification of quantum devices without demanding full knowledge about their inner workings. A typical approach in designing such protocols is based on observing nonlocal correlations which exhibit maximum violation in a Bell test. We show that in Bell experiment known as Hardy's test of nonlocality not only the maximally nonlocal correlation self-tests a quantum state, rather a non-maximal nonlocal behavior can serve the same purpose. We, in fact, completely characterize all such behaviors leading to self-test of every pure two qubit entangled state except the m…
The partial states of a multipartite quantum state may carry a lot of information: in some cases, they determine the global state uniquely. This result is known for tomographic information, that is for fully characterized measurements. We extend it to the device-independent framework by exhibiting sets of two-party correlations that self-test pure three-qubit states.
It is well-known that observing nonlocal correlations allows us to draw conclusions about the quantum systems under consideration. In some cases this yields a characterisation which is essentially complete, a phenomenon known as self-testing. Self-testing becomes particularly interesting if we can make the statement robust, so that it can be applied to a real experimental setup. For the simplest self-testing scenarios the most robust bounds come from the method based on operator inequalities. In this work we elaborate on this idea and apply it to the family of tilted CHSH inequalities. These i…
Device-independent self-testing is the possibility of certifying the quantum state and the measurements, up to local isometries, using only the statistics observed by querying uncharacterized local devices. In this paper, we study parallel self-testing of two maximally entangled pairs of qubits: in particular, the local tensor product structure is not assumed but derived. We prove two criteria that achieve the desired result: a double use of the Clauser-Horne-Shimony-Holt inequality and the $3\times 3$ Magic Square game. This demonstrate that the magic square game can only be perfectly won by …
