A pulsed balanced homodyne detector has been developed for precise measurements of electric field quadratures of pulsed optical quantum states. A high level of common mode suppression (> 85 dB) and low electronic noise (730 electrons per pulse) provide a signal to noise ratio of 14 dB for the measurement of the quantum noise of individual pulses. Measurements at repetition rates up to 1 MHz are possible. As a test, quantum tomography of the coherent state is performed and the Wigner function and the density matrix are reconstructed with a 99.5% fidelity. The detection system can also be used for ultrasensitive balanced detection in cw mode, e.g. for weak absorption measurements.
A new scheme is described for pulsed squeezed light generation using femtosecond pulses parametrically deamplified through a single pass in a thin (0.1mm) potassium niobate KNbO3 crystal, with a significant deamplification of about -3dB. The quantum noise of each individual pulse is registered in the time domain using a single-shot homodyne detection operated with femtosecond pulses and the best squeezed quadrature variance was measured to be 1.87 dB below the shot noise level. Such a scheme provides the basic ressource for time-resolved quantum communication protocols.
We demonstrate a die-level balanced homodyne detector with a high quantum-to-classical noise clearance of 19.1dB over 3GHz bandwidth. We evaluate this receiver as a high-quality entropy source for random number generation at >10Gb/s and prove the functional integration of a classical 10Gb/s duobinary communication channel.
We discuss excess noise contributions of a practical balanced homodyne detector in Gaussian-modulated coherent-state (GMCS) quantum key distribution (QKD). We point out the key generated from the original realistic model of GMCS QKD may not be secure. In our refined realistic model, we take into account excess noise due to the finite bandwidth of the homodyne detector and the fluctuation of the local oscillator. A high speed balanced homodyne detector suitable for GMCS QKD in the telecommunication wavelength region is built and experimentally tested. The 3dB bandwidth of the balanced homodyne …
In this paper we investigate the security of a quantum cryptographic scheme which utilizes balanced homodyne detection and weak coherent pulse (WCP). The performance of the system is mainly characterized by the intensity of the WCP and postselected threshold. Two of the simplest intercept/resend eavesdropping attacks are analyzed. The secure key gain for a given loss is also discussed in terms of the pulse intensity and threshold.
We report an experimental quantum key distribution that utilizes balanced homodyne detection, instead of photon counting, to detect weak pulses of coherent light. Although our scheme inherently has a finite error rate, it allows high-efficiency detection and quantum state measurement of the transmitted light using only conventional devices at room temperature. When the average photon number was 0.1, an error rate of 0.08 and "effective" quantum efficiency of 0.76 were obtained.
We present the characterization of a novel balanced homodyne detector operating in the mid-infrared. The challenging task of revealing non-classicality in mid-infrared light, e.~g. in quantum cascade lasers emission, requires a high-performance detection system. Through the intensity noise power spectral density analysis of the differential signal coming from the incident radiation, we show that our setup is shot-noise limited. We discuss the experimental results with a view to possible applications to quantum technologies, such as free-space quantum communication.
Low-noise, efficient, phase-sensitive time-domain optical detection is essential for foundational tests of quantum physics based on optical quantum states and the realization of numerous applications ranging from quantum key distribution to coherent classical telecommunications. Stability, bandwidth, efficiency, and signal-to-noise ratio are crucial performance parameters for effective detector operation. Here we present a high-bandwidth, low-noise, ultra-stable time-domain coherent measurement scheme based on balanced homodyne detection ideally suited to characterization of quantum and classi…
Pulsed homodyne quantum tomography usually requires a high detection efficiency limiting its applicability in quantum optics. Here, it is shown that the presence of low detection efficiency ($<50\%$) does not prevent the tomographic reconstruction of quantum states of light, specifically, of Gaussian type. This result is obtained by applying the so-called "minimax" adaptive reconstruction of the Wigner function to pulsed homodyne detection. In particular, we prove, by both numerical and real experiments, that an effective discrimination of different Gaussian quantum states can be achieved. Our…
A simple scheme for conditional generation of nonclassical light with sub-Poissonian photon-number statistics is proposed. The method utilizes entanglement of signal and idler modes in two-mode squeezed vacuum state generated in optical parametric amplifier. A quadrature component of the idler mode is measured in balanced homodyne detector and only those experimental runs where the absolute value of the measured quadrature is higher than certain threshold are accepted. If the threshold is large enough then the conditional output state of signal mode exhibits reduction of photon-number fluctuat…
We consider the moment operators of the observable (i.e. a semispectral measure or POM) associated with the balanced homodyne detection statistics, with paying attention to the correct domains of these unbounded operators. We show that the high amplitude limit, when performed on the moment operators, actually determines uniquely the entire statistics of a rotated quadrature amplitude of the signal field, thereby verifying the usual assumption that the homodyne detection achieves a measurement of that observable. We also consider, in a general setting, the possibility of constructing a measurem…
We present a continuous-variable experimental analysis of a two-photon Fock state of free-propagating light. This state is obtained from a pulsed non-degenerate parametric amplifier, which produces two intensity-correlated twin beams. Counting two photons in one beam projects the other beam in the desired two-photon Fock state, which is analyzed by using a pulsed homodyne detection. The Wigner function of the measured state is clearly negative. We developed a detailed analytic model which allows a fast and efficient analysis of the experimental results.
Driven by single photon detection requirements especially for quantum information sciences, the theory of arrays of off-on detectors has been well developed and applied. However for a comprehensive characterization of nonclassicality one also needs phase sensitive properties. This missing link is fulfilled by the theory of phase sensitive click counting measurements. This theory is presented. It unifies the balanced homodyne detection for high intensities with the click detection in the few photon regime. We formulate and apply a hierarchy of nonlinear squeezing conditions to probe quantum eff…
Characterising quantum states of light in the 2 $μm$ band requires high-performance shot-noise limited detectors. Here, we present the characterisation of a homodyne detector that we use to observe vacuum shot-noise via homodyne measurement with a 2.07 $μm$ pulsed mode-locked laser. The device is designed primarily for pulsed illumination. It has a 3 dB bandwidth of 13.2 MHz, total conversion efficiency of 58% at 2.07 $μm$ and a common-mode rejection ratio of 48 dB at 39.5 MHz. The detector begins to saturate at 1.8 mW with 9 dB of shot-noise clearance at 5 MHz. This demonstration enables the …
Within the dipole approximation we describe the interaction of a photodiode with the quantum electric field. The diode is modelled by an electron in a bound state which upon interaction, treated perturbatively in the paper, can get excited to one of the scattering states. We furthermore analyze a balanced homodyne detector (BHD) with a local oscillator (LO) consisting of two photodiodes illuminated by a monochromatic coherent state. We show, that to the leading order the BHD's output measures the expectation value of the quantum electric field, in the state without the LO, restricted to the fr…
In the context of the readout scheme for gravitational-wave detectors, the "double balanced homodyne detection" proposed in [K.~Nakamura and M.-K.~Fujimoto, arXiv:1709.01697.] is discussed in detail. This double balanced homodyne detection enables us to measure the expectation values of the photon creation and annihilation operators. Although it has been said that the operator $\hat{b}_θ:=\cosθ\hat{b}_{1}+\sinθ\hat{b}_{2}$ can be measured through the homodyne detection in literature, we first show that the expectation value of the operator $\hat{b}_θ$ cannot be measured as the linear combinati…
We recall and generalize the analysis of the output of the so-called balanced homodyne detectors. The most important feature of these detectors is their ability to quantify the vacuum fluctuations of the electric field, that is expectation values of products of (quantum-) electric-field operators. More precisely, the output of BHDs provides information on the one- and two-point functions of arbitrary states of quantum fields. We generalize the analysis of the response of BHDs to the case of quantum fields under influence of static external conditions such as cavities or polarizable media. By r…
A measurement technique is proposed which, in principle, allows one to observe the general space-time correlation properties of a quantized radiation field. Our method, called balanced homodyne correlation measurement, unifies the advantages of balanced homodyne detection with those of homodyne correlation measurements.
We experimentally study optical homodyne and heterodyne detections with a same setup, which is flexible to manipulate the signal sideband modulation. When the modulation only generate a single signal sideband, the light field measurement by mixing the single sideband at $ω_{0}+Ω$ with a strong local oscillator at the carrier frequency $ω_{0}$ on a beam splitter become balanced heterodyne detection. When two signal sidebands at $ω_{0}\pmΩ$ are generated and the relative phase of the two sidebands is locked, this measurement corresponds to optical balanced homodyne detection. With this setup, we…
The balanced homodyne detection as a readout scheme of gravitational-wave detectors is carefully examined, which specifies the directly measured quantum operator in the detection. This specification is necessary to apply the quantum measurement theory to gravitational-wave detections. We clarify the contribution of vacuum fluctuations to the noise spectral density without using the two-photon formulation. We found that the noise spectral density in the two-photon formulation includes vacuum fluctuations from the main interferometer but does not includes those from the local oscillator which de…
Traditional method for measuring continuous-variable quantum entanglement relies on balanced homodyne detections, which are sensitive to vacuum quantum noise coupled in through losses resulted from many factors such as detector's quantum efficiency and mode mismatching between detected field and local oscillator. In this paper, we propose and analyze a new measurement method, which is realized by assisting the balanced homodyne detections with a high gain phase sensitive parametric amplifier. The employment of the high gain parametric amplifier helps to tackle the vacuum quantum noise originat…
It is shown that the exponential moments of the canonical phase can be directly sampled from the data recorded in balanced homodyne detection. Analytical expressions for the sampling functions are derived, which are valid for arbitrary states and bridge the gap between quantum and classical phase. The reconstruction of the canonical phase distribution from the experimentally determined exponential moments is discussed.
I propose an iterative expectation maximization algorithm for reconstructing a quantum optical ensemble from a set of balanced homodyne measurements performed on an optical state. The algorithm applies directly to the acquired data, bypassing the intermediate step of calculating marginal distributions. The advantages of the new method are made manifest by comparing it with the traditional inverse Radon transformation technique.
A review is given on phase-sensitive measurements, such as homodyne detection, for radiation fields and material systems. Methods of quantum-state reconstruction are considered for radiation fields, including multimode and pulsed radiation. For matter systems, methods are reported for the reconstruction of quantum states of molecular vibrations, the quantized motion of trapped atoms, Bose-Einstein condensates, atomic matter waves, electron motion, spin and angular momentum systems, and crystal lattices.
A method for direct sampling of the exponential moments of canonical phase from the data recorded in balanced homodyne detection is presented. Analytical expressions for the sampling functions are shown which are valid for arbitrary states. A numerical simulation illustrates the applicability of the method and compares it with the direct measurement of phase by means of double homodyning.
A new method is described for determining the quantum correlations at different times in optical pulses by using balanced homodyne detection. The signal pulse and sequences of ultrashort test pulses are superimposed, where for chosen distances between the test pulses their relative phases and intensities are varied from measurement to measurement. The correlation statistics of the signal pulse is obtained from the time-integrated difference photocurrents measured.
We describe a simple and efficient setup to generate and characterize femtosecond quadrature-entangled pulses. Quantum correlations equivalent to about 2.5 dB squeezing are efficiently and easily reached using the non-degenerate parametric amplification of femtosecond pulses through a single-pass in a thin (0.1 mm) potassium niobate crystal. The entangled pulses are then individually sampled to characterize the non-separability and the entropy of formation of the states. The complete experiment is analysed in the time-domain, from the pulsed source of quadrature entanglement to the time-resolv…
Direct photon detection is experimentally implemented to measure the squeezing and purity of a single-mode squeezed vacuum state without an interferometric homodyne detection. Following a recent theoretical proposal [arXiv quant-ph/0311119], the setup only requires a tunable beamsplitter and a single-photon detector to fully characterize the generated Gaussian states. The experimental implementation of this procedure is discussed and compared with other reference methods.
We present a comprehensive theory and an easy to follow method for the design and construction of a wideband homodyne detector for time-domain quantum measurements. We show how one can evaluate the performance of a detector in a specific time-domain experiment based on electronic spectral characteristic of that detector. We then present and characterize a high-performance detector constructed using inexpensive, commercially available components such as low-noise high-speed operational amplifiers and high-bandwidth photodiodes. Our detector shows linear behavior up to a level of over 13 dB clea…
The technique of almost-balanced weak values amplification (ABWV) was recently proposed [Phys. Rev. Lett. 116: 100803 (2016)]. We demonstrate this technique using a modified Sagnac interferometer, where the counter-propagating beams are spatially separated. The separation between the two beams provides additional amplification, with respect to using colinear beams in a Sagnac interferometer. As a demonstration of the technique, we perform measurements of the angular velocity in one of the mirrors of the interferometer. Within the same setup, the weak-value amplification technique is also perfo…
We design and demonstrate on-chip homodyne detection operating in the quantum regime, i.e. able to detect genuine nonclassical features. Our setup exploits a glass-integrated homodyne analyzer (IHA) entirely fabricated by femtosecond laser micromachining. The IHA incorporates on the same chip a balanced waveguide beam splitter and a thermo-optic phase shifter, allowing us to record homodyne traces at different phases and to perform reliable quantum state tomography. In particular, we show that the IHA allows for the detection of nonclassical features of continuous-variable quantum states, such…
Balanced homodyne detector (BHD) that can measure the field quadratures of coherent states has been widely used in a range of quantum information technologies. Generally, the BHD tends to suffer from narrow bands and an expanding bandwidth behavior usually traps into a compromise with the gain, electronic noise, and quantum to classical noise ratio, etc. In this paper, we design and construct a wideband BHD based on radio frequency and integrated circuit technology. Our BHD shows bandwidth behavior up to 1.2 GHz and its quantum to classical noise ratio is around 18 dB. Simultaneously, the BHD …
We demonstrate a new tool for filtering technical and electronic noises from pulses of light, especially relevant for signal processing methods in quantum optics experiments as a means to achieve the shot-noise level and reduce strong technical noise by means of a pattern function. We provide the theory of this pattern-function filtering based on balance detection. Moreover, we implement an experimental demonstration where 10 dB of technical noise is filtered after balance detection. Such filter can readily be used for probing magnetic atomic ensembles in environments with strong technical noi…
A single-photon Fock state has been generated by means of conditional preparation from a two-photon state emitted in the process of spontaneous parametric down-conversion. A recently developed high-frequency homodyne tomography technique has been used to completely characterize the Fock state by means of a pulse-to-pulse analysis of the detectors' difference photocurrent. The density matrix elements of the generated state have been retrieved with a final detection efficiency of about 57%. A comparison has been performed between the phase-averaged tomographic reconstructions of the Wigner funct…
We show that the full statistics of the two detectors outputs in a balanced homodyne detection setup involving a local oscillator in an ideal coherent state is experimentally accessible despite the excess noise existing in actual laser sources. This possibility is illustrated using phase randomized coherent states signals from which the statistics of Fock states can accurately be obtained. The experimental verification of the recently predicted [Kühn and Vogel, Phys. Rev. A, \textbf{98}, 013832 (2018)] two-detector correlation probability for Fock states is presented for states $\vert 1 \rangl…
Protocols for probabilistic entanglement-assisted quantum teleportation and for entanglement swapping of material qubits are presented. They are based on a protocol for postselective Bell-state projection which is capable of projecting two material qubits onto a Bell state with the help of ancillary coherent multiphoton states and postselection by balanced homodyne photodetection. Provided this photonic postselection is successful we explore the theoretical possibilities of realizing unit fidelity quantum teleportation and entanglement swapping with $25\%$ success probability. This photon-assi…
Feasible setup for pulsed quantum non-demolition interaction between two distant mechanical oscillators through optical or microwave mediator is proposed. The proposal uses homodyne measurement of the mediator and feedforward control of the mechanical oscillators to reach the interaction. To verify quantum nature of the interaction, we investigate the Gaussian entanglement generated in the mechanical modes. We evaluate it under influence of mechanical bath and propagation loss for the mediator and propose ways to optimize the interaction. Finally, both currently available optomechanical and el…
The advent of stable, highly squeezed states of light has generated great interest in the gravitational wave community as a means for improving the quantumnoise- limited performance of advanced interferometric detectors. To confidently measure these squeezed states, it is first necessary to measure the shot-noise across the frequency band of interest. Technical noise, such as non-stationary events, beam pointing, and parasitic interference, can corrupt shot-noise measurements at low Fourier frequencies, below tens of kilo-Hertz. In this paper we present a qualitative investigation into all of …
Using coherent phase states, parameterized phase state distributions for a single-mode radiation field are introduced and their integral relation to the phase-parameterized field-strength distributions is studied. The integral kernel is evaluated and the problem of direct sampling of the coherent phase state distributions using balanced homodyne detection is considered. Numerical simulations show that when the value of the smoothing parameter is not too small the coherent phase state distributions can be obtained with sufficiently well accuracy. With decreasing value of the smoothing parameter…
We provide a detailed analysis of the recently proposed setup for a loophole-free test of Bell inequality using conditionally generated non-Gaussian states of light and balanced homodyning. In the proposed scheme, a two-mode squeezed vacuum state is de-gaussified by subtracting a single photon from each mode with the use of an unbalanced beam splitter and a standard low-efficiency single-photon detector. We thoroughly discuss the dependence of the achievable Bell violation on the various relevant experimental parameters such as the detector efficiencies, the electronic noise and the mixedness …
Quantum states of light having a Wigner function with negative values represent a key resource in quantum communication and quantum information processing. Here, we present the generation of such a state at the telecommunication wavelength of 1550nm. The state is generated by means of photon subtraction from a weakly squeezed vacuum state and is heralded by the `click' of a single photon counter. Balanced homodyne detection is applied to reconstruct the Wigner function, also yielding the state's photon number distribution. The heralding photons are frequency up-converted to 532nm to allow for …
We demonstrate a die-level balanced homodyne receiver for coherent optical access and continuous-variable quantum applications, featuring a 40dB CMRR up to 1GHz and a high quantum-to-classical noise ratio of 26.8dB at 12.3mW of LO power. 500Mb/s QPSK transmission was accomplished with a sensitivity of -55.8dBm.
Variable measurement operators enable the optimization of strategies for testing quantum properties and the preparation of a range of quantum states. Here, we experimentally implement a weak-field homodyne detector that can continuously tune between measuring photon numbers and field quadratures. We combine a quantum signal with a coherent state on a balanced beam splitter and detect light at both output ports using photon-number-resolving transition edge sensors. We observe that the discrete difference statistics converge to the quadrature distribution of the signal as we increase the coheren…
Sagnac speed meter (SSM) topology is known as an alternative technique to reduce quantum back-action in gravitational-wave interferometers. However, any potential imbalance of the main beamsplitter was shown to reduce the quantum noise superiority of speed meter at low frequencies, caused due to increased laser noise coupling to the detection port. In this paper, we show that implementing balanced homodyne readout scheme and for a particular choice of the local oscillator (LO) delivery port, the excess laser noise contribution to quantum noise limited sensitivity (QNLS) is partly compensated a…
The balanced homodyne detection as a readout scheme of gravitational-wave detectors is carefully examined from the quantum field theoretical point of view. The readout scheme in gravitational-wave detectors specifies the directly measured quantum operator in the detection. This specification is necessary when we apply the recently developed quantum measurement theory to gravitational-wave detections. We examine the two models of measurement. One is the model in which the directly measured quantum operator at the photodetector is Glauber's photon number operator, and the other is the model in w…
