Ordinary metallic photonic crystals (PCs) have photonic band gaps in which the density of states (DOS) is strongly modified. Thermal emission of photons can be suppressed and enhanced accordingly. We consider the thermal emission characteristics of a metallic photonic crystal slab with a tunable thickness which in the thick limit approaches that of a photonic crystal and in the thin limit approaches that of a textured surface. We find that a thick photonic crystal suppresses emission in a specific range while a thin slab suppresses low frequency emission.
We characterize nano-textured surfaces by optical diffraction techniques using an adapted commercial light microscope with two detectors, a CCD camera and a spectrometer. The acquisition and analyzing time for the topological parameters height, width, and sidewall angle is only a few milliseconds of a grating. We demonstrate that the microscope has a resolution in the nanometer range, also in an environment with many vibrations, such as a machine floor. Furthermore, we demonstrate an easy method to find the area of interest with the integrated CCD camera.
Photonic molecules, named by analogy with chemical molecules, are clusters of closely located electromagnetically interacting microcavities or "photonic atoms". As two or several microcavities are brought close together, their optical modes interact, and a rich spectrum of photonic molecule supermodes emerges, which depends both on geometrical and material properties of individual cavities and on their mutual interactions. Here, we discuss ways of controllable manipulation of photonic molecule supermodes, which improve or add new functionalities to microcavity-based optical components. We pres…
We have measured the photonic bandgap in the transmission of microwaves through a two-dimensional photonic crystal slab. The structure was constructed by cementing acrylic rods in a hexagonal closed-packed array to form rectangular stacks. We find a bandgap centered at approximately 11 GHz, whose depth, width and center frequency vary with the number of layers in the slab, angle of incidence and microwave polarization.
We demonstrate a method to locally control the temperature of photonic crystal devices via micron-scale electrical heaters. The method is used to control the resonant frequency of InAs quantum dots strongly coupled to GaAs photonic crystal resonators. This technique enables independent control of large ensembles of photonic devices located on the same chip at tuning speed as high as hundreds of kHz.
The latest achievements in the fabrication of black phosphorus thin layers, towards the technological breakthrough of a phosphorene atomically thin layer, are paving the way for a their employment in electronics, optics, and optoelectronics. In this work, we have simulated the optical properties of one-dimensional photonic structures, i.e. photonic crystals and microcavities, in which few-layer black phosphorus is one of the components. The insertion of the 5 nm black phosphorous layers leads to a photonic band gap in the photonic crystals and a cavity mode in the microcavity interesting for l…
Microwave photonics (MWP) is an emerging field in which radio frequency (RF) signals are generated, distributed, processed and analyzed using the strength of photonic techniques. It is a technology that enables various functionalities which are not feasible to achieve only in the microwave domain. A particular aspect that recently gains significant interests is the use of photonic integrated circuit (PIC) technology in the MWP field for enhanced functionalities and robustness as well as the reduction of size, weight, cost and power consumption. This article reviews the recent advances in this …
We designed an on-chip transformative optic system of a metalens-photonic crystal resonator metasystem on a foundry compatible silicon photonic platform. By adjusting the on-chip metalens' focusing length and mode dimension, the insertion loss between the metalens and the photonic crystal resonator and waveguide structures are minimized through mode-matching. The micro-system does not involve any single mode silicon nanowire waveguide, and thus mechanically robust without any oxide claddings. The proposed microsystem is ideal for miniaturized chemical and biosensors operating in air or solutio…
A single-mode all-silica photonic crystal fiber with an effective area of 600 square-micron and low bending loss is demonstrated. The fiber is characterized in terms of attenuation, chromatic dispersion and modal properties.
Using a 3D fully-vectorial nonlinear time-domain analysis we numerically investigate the generation of terahertz radiation by pumping a photonic crystal microcavity out of resonance. High quality factors and a quadratic susceptibility lead to few-cycle terahertz pulses via optical rectification. Material dispersion as well as linear and nonlinear anisotropy is fully accounted for.
Second-harmonic and sum-frequency mixing phenomena associated with 3D-localized photonic modes are studied in InP-based planar photonic crystal microcavities excited by short-pulse radiation near 1550 nm. Three-missing-hole microcavities that support two closely-spaced modes exhibit rich second-order scattering spectra that reflect intra- and inter-mode mixing via the bulk InP chi(2) during ring-down after excitation by the broadband, resonant pulse. Simultaneous excitation with a non-resonant source results in tunable second-order radiation from the microcavity.
We experimentally demonstrate series of identical two, three, and five coupled high Q-factor Surface Nanoscale Axial Photonics (SNAP) microresonators formed by periodic nanoscale variation of the optical fiber radius. These microresonators are fabricated with a 100 \mum period along an 18 \mum radius optical fiber. The axial FWHM of these microresonators is 80 \mum and their Q-factor exceeds 107. In addition, we demonstrate a SNAP microresonator with the axial FWHM as small as 30 \mum and the axial FWHM of the fundamental mode as small as 10 \mum. These results may potentially enable the dense…
By numerically integrating the three-dimensional Maxwell equations in the time domain with reference to a dispersive quadratically nonlinear material, we study second harmonic generation in planar photonic crystal microresonators. The proposed scheme allows efficient coupling of the pump radiation to the defect resonant mode. The out-coupled generated second harmonic is maximized by impedance matching the photonic crystal cavity to the output waveguide.
Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles.
In this paper we describe an application of the finite difference method to obtain the transverse magnetic photonic band gap diagram of a photonic crystal. The strategy of this method is to formulate the Maxwell equations in finite differences in order to write a computational code. We present experiments that confirm the validity of the calculations of the photonic band diagram as well as the refraction indix of such structure. All calculations were made for two dimensional metallic photonic crystal.
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality resonance filter.
We recently proposed two-dimensional coupled photonic crystal microcavity arrays as a route to achieve a slow-group velocity of light (flat band) in all crystal directions. In this paper we present the first experimental demonstration of such structures with a measured group velocity below 0.008c and discuss the feasibility of applications such as low-threshold photonic crystal lasers with increased output powers, optical delay components and sensors.
Recently introduced Surface Nanoscale Axial Photonics (SNAP) makes it possible to fabricate high Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical and robust technology, the SNAP platform requires methods enabling reproducible modification of the optical fiber radius at nanoscale. In this Letter, we demonstrate super-accurate fabrication of high Q-factor microresonators by nanoscale modification of the optical fiber radius and refractive index using the CO2 laser and the UV excimer laser beam exposures…
In the paper, we propose the new technology for mass production of the photonic crystal devices and all-optical integrated circuits. We carry out the brief analysis of positive and negative sides paying attention to recent advances in silicon fibers fabrication which is crucial moment in the proposed technology.
Polarization-resolved second-harmonic spectra are obtained from the resonant modes of a two-dimensional planar photonic crystal microcavity patterned in a free-standing InP slab. The photonic crystal microcavity is comprised of a single missing-hole defect in a hexagonal photonic crystal host formed with elliptically-shaped holes. The cavity supports two orthogonally-polarized resonant modes split by 60 wavenumbers. Sum-frequency data are reported from the nonlinear interaction of the two coherently excited modes, and the polarization dependence is explained in terms of the nonlinear susceptib…
A long existing issue for microdisk lasers is the small spontaneous emission coupling rate (β) in microdisk,. We found that it is due to the coupling of emitter spontaneous emission into competing Fabry-Perot (FP) modes in the microdisk cavity. Based on this analysis, we propose a new type of photonic crystal microdisk (PCM) laser to drastically suppress the photonic density of states in the vertical FP modes. As a result, we obtained a three fold increase of β than previously reported highest β of 0.15 at room temperature. The spontaneous emission control in truncated photonic crystals become…
In the past decade, optical frequency combs generated by high-Q micro-resonators, or micro-combs, which feature compact device footprints, high energy efficiency, and high-repetition-rates in broad optical bandwidths, have led to a revolution in a wide range of fields including metrology, mode-locked lasers, telecommunications, RF photonics, spectroscopy, sensing, and quantum optics. Among these, an application that has attracted great interest is the use of micro-combs for RF photonics, where they offer enhanced functionalities as well as reduced size and power consumption over other approach…
We present results for a photonic microwave resonator designed and fabricated at 17.4GHz with a record high Quality factor (Q = 26,400) at room temperature over a mode volume smaller than one cubic wavelength. The cavity is uniquely designed to have its electric field concentrated in air, which allows for efficient coupling to free space and facilitates interactions with gaseous atomic systems and fluids.
In this work, a refractive index (RI) sensor with an effective integration of colorimetric detection and optical sensing capabilities has been developed. Colorimetric detection relies on the sensitivity of the structural color of photonic crystal (PC) substrates to the changes in background RI, while the optical sensing is performed by measuring the magnification abilities of the dielectric microspheres, which depends on the position of the photonic nanojet. Based on this concept, we have successfully assembled 35 μm-diameter barium titanate glass microspheres, 4.9 μm-diameter polystyrene and …
We demonstrate the first monolithically integrated linear photonic crystal microcavities in an advanced SOI CMOS microelectronics process (IBM 45nm 12SOI) with no in-foundry process modifications. The cavities were integrated into a standard microelectronics design flow meeting process design rules, and fabricated alongside transistors native to the process. We demonstrate both 1520nm wavelength and 1180nm cavity designs using different cavity implementations due to design rule constraints. For the 1520nm and 1180nm designs, loaded quality factors of 2,000 and 4,000 are measured, and intrinsic…
We consider large-mode area photonic crystal fibers for visible applications where micro-deformation induced attenuation becomes a potential problem when the effective area A_eff is sufficiently large compared to lambda^2. We argue how a slight increase in fiber diameter D can be used in screening the high-frequency components of the micro-deformation spectrum mechanically and we confirm this experimentally for both 15 and 20 micron core fibers. For typical bending-radii (R~16 cm) the operating band-width increases by ~3-400 nm to the low-wavelength side.
Controlling the dispersion and directionality of the emission of nanosources is one of the major goals of nanophotonics research. This control will allow the development of highly efficient nanosources even at the single photon level. One of the ways to achieve this goal is to couple the emission to Bloch modes of periodic structures. Here, we present the first measurements of the directional emission from nanowire photonic crystals by using Fourier microscopy. With this technique we efficiently collect and resolve the directional emission of nanowires within the numerical aperture of a micros…
We design, fabricate, and experimentally demonstrate a compact thermo-optic gate switch comprising a 3.78 um-long coupled L0-type photonic crystalmicrocavities on a silicon-on-insulator substrate. A nanohole is inserted in the center of each individual L0 photonic crystalmicrocavity. Coupling between identical microcavities gives rise to bonding and anti-bonding states of the coupled photonic molecules. The coupled photonic crystalmicrocavities are numerically simulated and experimentally verified with a 6 nm-wide flat-bottom resonance in its transmission spectrum, which enables wider operatio…
Slow light has been widely utilized to obtain enhanced nonlinearities, enhanced spontaneous emissions, and increased phase shifts owing to its ability to promote light-matter interactions. By incorporating a graphene microheater on a slow-light silicon photonic crystal waveguide, we experimentally demonstrated an energy-efficient graphene microheater with a tuning efficiency of 1.07 nm/mW and power consumption per free spectral range of 3.99 mW. The rise and decay times (10% to 90%) were only 750 ns and 525 ns, which, to the best of our knowledge, are the fastest reported response times for mi…
Fast and highly accurate method based on the Muller contour integral equations and a trigonometric-trigonometric Galerkin discretization technique is presented for spectral design and fine-tuning of clusters of whispering-gallery (WG) mode microdisk resonators and photonic crystal (PC) defect cavities. It is shown that degeneracy and near-degeneracy of natural modes as well as modes optical confinement in coupled resonator clusters are significantly influenced by the symmetry of the structure. Photonic molecules with greatly enhanced quality factors are designed by exploiting the symmetry of t…
We have experimentally studied polarization properties of the two-dimensional coupled photonic crystal microcavity arrays, and observed a strong polarization dependence of the transmission and reflection of light from the structures - the effects that can be employed in building miniaturized polarizing optical components. Moreover, by combining these properties with a strong sensitivity of the coupled bands on the surrounding refractive index, we have demonstrated a detection of small refractive index changes in the environment, which is useful for construction of bio-chemical sensors.
We demonstrate a photonic RF Hilbert transformer for broadband microwave in-phase and quadrature-phase generation based on an integrated frequency optical comb, generated using a nonlinear microring resonator based on a CMOS compatible, high-index contrast, doped-silica glass platform. The high quality and large frequency spacing of the comb enables filters with up to 20 taps, allowing us to demonstrate a quadrature filter with more than a 5-octave (3 dB) bandwidth and an almost uniform phase response.
A two-dimensional photonic crystal microcavity design supporting a wavelength-scale volume resonant mode with a calculated quality factor (Q) insensitive to deviations in the cavity geometry at the level of Q~2x10^4 is presented. The robustness of the cavity design is confirmed by optical fiber-based measurements of passive cavities fabricated in silicon. For microcavities operating in the lambda = 1500 nm wavelength band, quality factors between 1.3-4.0x10^4 are measured for significant variations in cavity geometry and for resonant mode normalized frequencies shifted by as much as 10% of the…
We report on the rst evidence of direct micropeak machining using a photonic jet (PJ) with nanosecond laser pulses. PJ is a high concentrated propagative light beam with a full width at half maximum (FWHM) smaller than the diraction limit. In our case, PJs are generated with a shaped optical ber tip. Micropeaks with a FWHM of around 1 $μ$m, a height until 590 nm and an apex radius of 14 nm, were repeatability achieved on a silicon wafer. The experiments have been carried out in ambient air using a 100/140 multimode silica ber with a shaped tip along with a 35 kHz pulsed laser emitting 100 ns p…
Lithium niobate on insulator emerges as a promising platform for integrated microwave photonics because of its capability of ultralow-loss guidance and high-efficiency modulation of light. Chip-level integration of microwave filters is important for signal processing in the 5G/6G wireless communication. Here, we employed the principle of bound states in the continuum for low-loss waveguiding on an etchless lithium niobate integrated platform, and realized high-performance microwave photonic filters thereon. These microwave photonic filters consist of a high-quality photonic microcavity modulat…
Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based on Kerr micro-combs with spacings from 49-200GHz. We cover integral and fractional Hilbert transforms, differentiators as well as integrators. The potential of optical micro-combs for RF photonic app…
Highly reproducible manufacturing of organic optical crystals with well-defined geometry and dimension is important to realize industrially relevant all-organic microelectronic and nanophotonic components, and photonic integrated circuits. Here, we demonstrate programmed shape and size alteration of perylene crystal resonators into disk and rectangular geometries using focused-ion beam milling technique. Due to highly reproducible nature of the employed technique, the fabricated smaller sized disk and rectangular crystal resonators displaying shape and size dependent optical modes are suitable…
Microcombs have sparked a surge of applications over the last decade, ranging from optical communications to metrology. Despite their diverse deployment, most microcomb-based systems rely on a tremendous amount of bulk equipment to fulfill their desired functions, which is rather complicated, expensive and power-consuming. On the other hand, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh appli…
We present a photonic reservoir computing, relying on a non-linear phase-to-amplitude mapping process, able to classify in real-time multi-Gbaud time traces subject to transmission effects. This approach delivers an all-optical, low-power neuromorphic dispersion compensator.
In this paper, a new design of optical delay line based on coupled ring resonators in photonic crystals is proposed and analyzed by means of numerical simulation in CST Microwave Studio. The performance of the proposed photonic crystal ring resonator (PhCRR) based coupled resonant optical waveguide (CROW) is compared to: point-defect cavity based coupled cavity waveguides (CCW) in photonic crystal. microring resonator (MRR) based CROW. The suggested design addresses compactness issues of the MRR CROW while offering normalized delay values better than CCW and comparable to MRR CROW. The PhCRR C…
We review recent work on broadband RF channelizers based on integrated optical frequency Kerr micro-combs combined with passive micro-ring resonator filters, with microcombs having channel spacings of 200GHz and 49GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.
Optical resonances in 1D photonic crystal microcavities are investigated numerically using finite-element light scattering and eigenmode solvers. The results are validated by comparison to experimental and theoretical findings from the literature. The influence of nanometer-scale geometry variations on the resonator performance is studied. Limiting factors to ultra-high Q-factor performance are identified.
A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a resonant mode of a high-Q photonic crystal cavity with mode volume less than a cubic wavelength in size. Cavity mode quality factors of 4.7 x 10^4 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated.
We propose to use high numerical aperture single mode optical fibers like photonic crystal fiber for lensless in-line holographic microscopy. Highly divergent beam helps to overcome the spatial sampling limitation of the image sensor. In this paper, a submicron lateral resolution has been demonstrated, with an imaging sensor of pixel pitch 1.12 micrometer and a photonic crystal fiber of mode field diameter 1.8 micrometer. In earlier methods of single-shot lensless imaging, submicron resolution has been obtained at very small working distance and field of view. The proposed method improves the …
We investigate a photonic device consisting of two coupled optical cavities possessing Rashba-Dresselhaus spin-orbit coupling, TE-TM splitting, and linear polarisation splitting that opens a tuneable energy gap at the diabolic points of the photon dispersion; giving rise to an actively addressable local Berry curvature. The proposed architecture stems from recent advancements in the design of artificial photonic gauge fields in liquid crystal cavities [K. Rechcińska et al., Science 366, 727 (2019)]. Our study opens new perspectives for topological photonics, room-temperature spinoptronics, and…
We study experimentally the Goos-Hanchen effect observed at the reflection of a self-collimated beam from the surface of a two-dimensional photonic crystal and describe a method for controlling the beam reflection through surface engineering. The microwave photonic crystal, fabricated from alumina rods, allows control of the output position of a reflected beam undergoing an internal Goos-Hanchen shift by changing the rod diameter at the reflection surface. The experimental data is in good agreement with the results of the finite-difference time-domain numerical calculations.
Linear Arrays of Metal-Coated Microspheres: a Polarization-Sensitive Hybrid Colloidal Plasmonic-Photonic Crystal
National Institute for Research and Development of Isotopic and Molecular Technologies INCDTIM（同位素和分子技术研究与发展国家研究所）；Institute for Interdisciplinary Research in Bio-Nano-Sciences, Babes-Bolyai University（巴比什-博尧伊大学生物纳米科学跨学科研究所）
Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, large numbers of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first- to third-order differentiators. We compare and contrast results achieved and the tradeoffs involved with varying comb spacing, tap design methods, as well as shaping methods.
Microwave transmission measurements were performed for a three-dimensional (3D) layer-by-layer chiral photonic crystal (PhC), whose photonic band structure contains 3D singular points, Weyl points. For the frequency and wavevector in the vicinity of a Weyl point, the transmitted intensity was found to be inversely proportional to the square of the propagation length. In addition, the transmitted wave was well-collimated in the plane parallel to the PhC layers, even for point-source incidence. When a plane wave was incident on the PhC containing metal scatters, the planar wavefront was reconstr…
A driven high-Q Si microcavity is known to exhibit limit cycle oscillation originating from carrier-induced and thermo-optic nonlinearities. We propose a novel nanophotonic device to realize synchronized optical limit cycle oscillations with coupled silicon (Si) photonic crystal (PhC) microcavities. Here, coupled limit cycle oscillators are realized by using coherently coupled Si PhC microcavities. By simulating coupled-mode equations, we theoretically demonstrate mutual synchronization (entrainment) of two limit cycles induced by coherent coupling. Furthermore, we interpret the numerically si…
We demonstrate the use of integrated micro-resonator based optical frequency comb sources as the basis for transversal filtering functions for microwave and radio frequency photonic filtering and advanced functions.
